This adds a new helper, bch2_trans_mutex_lock(), for locking a mutex -
dropping and retaking btree locks as needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This code predates plumbing btree_trans through the bucket allocation
path: switching to it fixes a deadlock due to using multiple btree_trans
at the same time, which we never want to do.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This improves the nocow lock table so that hash table entries have
multiple locks, and locks specify which bucket they're for - i.e. we can
now resolve hash collisions.
This is important because the allocator has to skip buckets that are
locked in the nocow lock table, and previously hash collisions would
cause it to spuriously skip unlocked buckets.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds support for nocow mode, where we do writes in-place when
possible. Patch components:
- New boolean filesystem and inode option, nocow: note that when nocow
is enabled, data checksumming and compression are implicitly disabled
- To prevent in-place writes from racing with data moves
(data_update.c) or bucket reuse (i.e. a bucket being reused and
re-allocated while a nocow write is in flight, we have a new locking
mechanism.
Buckets can be locked for either data update or data move, using a
fixed size hash table of two_state_shared locks. We don't have any
chaining, meaning updates and moves to different buckets that hash to
the same lock will wait unnecessarily - we'll want to watch for this
becoming an issue.
- The allocator path also needs to check for in-place writes in flight
to a given bucket before giving it out: thus we add another counter
to bucket_alloc_state so we can track this.
- Fsync now may need to issue cache flushes to block devices instead of
flushing the journal. We add a device bitmask to bch_inode_info,
ei_devs_need_flush, which tracks devices that need to have flushes
issued - note that this will lead to unnecessary flushes when other
codepaths have already issued flushes, we may want to replace this with
a sequence number.
- New nocow write path: look up extents, and if they're writable write
to them - otherwise fall back to the normal COW write path.
XXX: switch to sequence numbers instead of bitmask for devs needing
journal flush
XXX: ei_quota_lock being a mutex means bch2_nocow_write_done() needs to
run in process context - see if we can improve this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree key cache mainly helps with lock contention, at the cost of
additional memory overhead. During some fsck passes the memory overhead
really matters, but fsck is single threaded so lock contention is an
issue - so skipping the key cache during fsck will help with
performance.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds backpointers: we now have a reverse index from device
and offset on that device (specifically, offset within a bucket) back to
btree nodes and (non cached) data extents.
The first 40 backpointers within a bucket are stored in the alloc key;
after that backpointers spill over to the next backpointers btree. This
is to help avoid performance regressions from additional btree updates
on large streaming workloads.
This patch adds all the code for creating, checking and repairing
backpointers. The next patch in the series is going to use backpointers
for copygc - finally getting rid of the need to scan all extents to do
copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's possible to do btree updates before going RW by adding them to the
list of updates for journal replay to do, but this is limited by what
fits in RAM. This patch switches the second alloc info phase to run
after going RW - btree_gc has already ensured the alloc btree itself is
correct - and tweaks the allocation path to deal with the potential
small inconsistencies.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Provide inline versions of some allocation functions
- bch2_alloc_sectors_done_inlined()
- bch2_alloc_sectors_append_ptrs_inlined()
and use them in the core IO path.
Also, inline bch2_extent_update_i_size_sectors() and
bch2_bkey_append_ptr().
In the core write path, function call overhead matters - every function
call is a jump to a new location and a potential cache miss.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This separates out the slowpath into a separate function, and inlines
bch2_alloc_v4_mut into bch2_trans_start_alloc_update(), the main place
it's called.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch introduces
- bpos_eq()
- bpos_lt()
- bpos_le()
- bpos_gt()
- bpos_ge()
and equivalent replacements for bkey_cmp().
Looking at the generated assembly these could probably be improved
further, but we already see a significant code size improvement with
this patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
checkpatch.pl gives lots of warnings that we don't want - suggested
ignore list:
ASSIGN_IN_IF
UNSPECIFIED_INT - bcachefs coding style prefers single token type names
NEW_TYPEDEFS - typedefs are occasionally good
FUNCTION_ARGUMENTS - we prefer to look at functions in .c files
(hopefully with docbook documentation), not .h
file prototypes
MULTISTATEMENT_MACRO_USE_DO_WHILE
- we have _many_ x-macros and other macros where
we can't do this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- add bch2_dev_usage_read_fast(), which doesn't return by value -
bch_dev_usage is big enough that we don't want the silent memcpy
- tweak the allocation path to only call bch2_dev_usage_read() once per
bucket allocated
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We don't want to fire the bucket_alloc_fail tracepoint on transaction
restart, when we can retry immediately - only when we the allocation
actually has to block.
Also, switch from sched_clock() to local_clock(), as we've been doing
elsewhere.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were incorrectly returning -BCH_ERR_insufficient_devices when we'd
received a different error from bch2_bucket_alloc_trans(), which
(erronously) turns into -EROFS further up the call chain.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This refactoring puts our various allocation path counters into a
dedicated struct - the upcoming nocow patch is going to add another
counter.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It now includes more info - whether the bucket was for metadata or data
- and also call it in the same place as the bucket_alloc_fail
tracepoint.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Continuing the saga of introducing private dedicated error codes for
each error path, this patch converts ENOSPC to error codes that are
subtypes of ENOSPC. We've recently had a test failure where we got
-ENOSPC where we shouldn't have, and didn't have enough information to
tell where it came from, so this patch will solve that problem.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Nested btree transactions require special care, and an upcoming patch is
going to add assertions to that effect. We don't want to be using them
unnecessarily, so this patch switches bch2_bucket_trans_early() to not
handle transaction restarts.
This patch also adds a cursor so that on transaction restart we can
continue scanning from where the previous search for an empty bucket
left off.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have error codes, with subtypes, we can switch to our own
error code for transaction restarts - and even better, a distinct error
code for each transaction restart reason: clearer code and better
debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
In bch2_bucket_alloc_trans(), we're iterating over buckets - but not
directly with an iterator, since we're iterating over the freespace
btree.
This means that we need to clear iter->path->preserve, otherwise we'll
end up retaining a btree_path for every alloc key we touched - which is
not what we want here.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Instead of overloading standard error codes (EINTR/EAGAIN), and defining
short lists of error codes in multiple places that potentially end up
overlapping & conflicting, we're now going to have one master list of
error codes.
Error codes are defined with an x-macro: thus we also have
bch2_err_str() now.
Also, error codes have a class field. Now, instead of checking for
errors with ==, code should use bch2_err_matches(), which returns true
if the error is equal to or a sub-error of the error class.
This means we can define unique errors for every source location where
an error is generated, which will help improve our error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, dev_buckets_available() only counted buckets that are
eligible to be allocated right now - i.e. buckets that don't have cached
data, or need discard, or need gc gens, etc.
But most users of this function want to know how many buckets are
eligible to be allocated from without moving data around - copygc,
allocator striping, which means we should be including cached data
buckets etc.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch updates bch2_open_buckets_to_text() to include the device and
bucket the open_bucket owns.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Previously, we were missing accounting for buckets in need_gc_gens and
need_discard states. This matters because buckets in those states need
other btree operations done before they can be used, so they can't be
conuted when checking current number of free buckets against the
allocation watermark.
Also, we weren't directly counting free buckets at all. Now, data type 0
== BCH_DATA_free, and free buckets are counted; this means we can get
rid of the separate (poorly defined) count of unavailable buckets.
This is a new on disk format version, with upgrade and fsck required for
the accounting changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Now that we have new persistent data structures for the allocator, this
patch converts the allocator to use them.
Now, foreground bucket allocation uses the freespace btree to find
buckets to allocate, instead of popping buckets off the freelist.
The background allocator threads are no longer needed and are deleted,
as well as the allocator freelists. Now we only need background tasks
for invalidating buckets containing cached data (when we are low on
empty buckets), and for issuing discards.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the write path, after the write to the block device(s) complete we
have to punt to process context to do the btree update.
Instead of using the work item embedded in op->cl, this patch switches
to a per write-point work item. This helps with two different issues:
- lock contention: btree updates to the same writepoint will (usually)
be updating the same alloc keys
- context switch overhead: when we're bottlenecked on btree updates,
having a thread (running out of a work item) checking the write point
for completed ops is cheaper than queueing up a new work item and
waking up a kworker.
In an arbitrary benchmark, 4k random writes with fio running inside a
VM, this patch resulted in a 10% improvement in total iops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The main in-memory bucket array is going away, but we'll still need to
keep bucket generations in memory, at least for now - ptr_stale() needs
to be an efficient operation.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This is so that the copygc code doesn't have to refer to
bucket_mark.owned_by_allocator - assisting in getting rid of the in
memory bucket array.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Prep work for adding a hash table of open buckets - instead of embedding
a bch_extent_ptr, we need to refer to the bucket directly so that we're
not calling sector_to_bucket() in the hash table lookup code, which has
an expensive divide.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This changes bch2_bucket_alloc_new_fs() to a simple bump allocator that
doesn't need to use the in memory bucket array, part of a larger patch
series to entirely get rid of the in memory bucket array, except for
gc/fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Start a new header, errcode.h, for bcachefs-private error codes - more
error codes will be converted later.
This patch just converts bucket_alloc_ret so that they can be mixed with
standard error codes and passed as ERR_PTR errors - the ec.c code was
doing this already, but incorrectly.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This uses the kthread_wait_freezable() macro to simplify a lot of the
allocator thread code, along with cleaning up bch2_invalidate_bucket2().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The owned_by_allocator field is a purely in memory thing, even if/when
we bring back GC at runtime there's no need for it to be recalculating
this field. This is prep work for pulling it out of struct bucket, and
eventually getting rid of the bucket array.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Writepoints are never deallocated so the rcu_read_lock() isn't really
needed, but we are doing lockless list traversal.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Awhile back the meaning of is_available_bucket() and thus also
bch_dev_usage->buckets_unavailable changed to include buckets that are
owned by the allocator - this was so that the stat could be persisted
like other allocation information, and wouldn't have to be regenerated
by walking each bucket at mount time.
This broke copygc, which needs to consider buckets that are reclaimable
and haven't yet been grabbed by the allocator thread and moved onta
freelist. This patch fixes that by adding dev_buckets_reclaimable() for
copygc and the allocator thread, and cleans up some of the callers a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is to make it more amenable for serialization.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Allocating buckets for existing stripes was busted, in part because the
data structures were too contorted. This reworks new stripes so that we
have an array of open buckets that matches blocks in the stripe, and
it's sparse if we're reusing an existing stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This reverts part of the change from "bcachefs: Don't use
BTREE_INSERT_USE_RESERVE so much" - it turns out we still should be
reserving open buckets for btree node allocations, because otherwise
data bucket allocations (especially with erasure coding enabled) can use
up all our open buckets and we won't be able to do the metadata update
that lets us release those open bucket references. Oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Allocations for copygc have to be kept separate from everything else,
so that copygc doesn't get starved.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
