For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The change is based on rafael/acpi-nhlt [1] immutable branch which
Rafael kindly prepared for me. Without the topmost changes to ACPI/NHLT,
the patches present will fail to compile.
Recent changes for the ACPI tree [2] refactored interfaces of the NHLT
table. Currently we have two implementations - one found in acpi
subsystem (unused) and one in sound/hda/. As NHLT is part of ACPI, idea
is to make the former useful and then switch all users of existing
sound/hda/intel-nhlt.c to this new interface over time and remove the
duplicate afterward.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/?h=acpi-nhlt
[2]: https://lore.kernel.org/linux-acpi/20240319083018.3159716-1-cezary.rojewski@intel.com/
Now that NHLT support in ACPI framework was introduced, migrate avs
driver to new API.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240419084307.2718881-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASRC module configuration consists of several reserved fields. Zero
them out when initializing the module to avoid sending invalid data.
Fixes: 274d79e518 ("ASoC: Intel: avs: Configure modules according to their type")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Copier's config_length shall always be at least one even if there is no
configuration payload to carry. While the firmware treats
config_length=0 or 1 in the same manner, the driver shall initialize the
module properly.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") enforced
strict flex array declarations. This generates false-positive in form of:
"memcpy: detected field-spanning write". Avoid it by utilizing the
DECLARE_FLEX_ARRAY() macro.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To provide option for selecting different bit-per-sample than just the
maximum one, use the new format calculation mechanism.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-14-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to instantiate modules on the firmware side, the driver sends
payload with module configuration. In some case size of this information
is not known before hand, so driver allocates temporary memory during
module creation and frees it after use. Optimize the flow a bit, by
preallocating maximum buffer. This removes the time spend on allocating
memory, as well as potential OOM errors during module initialization.
Handlers for modules, where configuration data fits on stack, are left
as is.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929112436.787058-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct avs_modcfg_ext structure has a flexible array member for the
pin_fmts array, and the size should be calculated using struct_size to
prevent the potential for overflow with the allocation.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: "Amadeusz Sławiński" <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230303180457.2457069-1-jacob.e.keller@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Handle creation of peakvol module in FW. When peakvol module is created
it retrieves actual value from kcontrol and sends it to FW as part of
configuration data.
Co-authored-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As reported by Nathan, when building avs driver using clang with:
CONFIG_COMPILE_TEST=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_KASAN=y
CONFIG_PCI=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_INTEL_AVS=y
there are reports of too big stack use, like:
sound/soc/intel/avs/path.c:815:18: error: stack frame size (2176) exceeds limit (2048) in 'avs_path_create' [-Werror,-Wframe-larger-than]
struct avs_path *avs_path_create(struct avs_dev *adev, u32 dma_id,
^
1 error generated.
This is apparently caused by inlining many calls to guid_equal which
inlines fortified memcpy, using 2 size_t variables.
Instead of hardcoding many calls to guid_equal, use lookup table with
one call, this improves stack usage.
Link: https://lore.kernel.org/alsa-devel/YtlzY9aYdbS4Y3+l@dev-arch.thelio-3990X/T/
Link: https://github.com/ClangBuiltLinux/linux/issues/1642
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220722111959.2588597-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each module on DSP side serves a processing purpose. Depending on its
purpose, it needs different information during its initialization. Add
functions responsible for creating instances of specific module types
given the information coming from the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When binding modules to pins other than pin0, sometimes additional
preparations need to be made, depending on the module type.
Add function that prepares modules when necessary before binding them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Creating the pipelines and instantiating the modules alone is
insufficient to have a fully operational stream. Before it can be run,
stream components need to be bound. Add arming functions to ensure all
necessary operations are completed before path is yielded back to the
avs_path_create() caller.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add functions to ease with state changing of all objects found in the
path. Each represents either a BIND/UNBIND or SET_PIPELINE_STATE IPC.
DSP pipelines follow simple state machine scheme:
CREATE -> RESET -> PAUSE -> RUNNING -> PAUSE -> RESET -> DELETE
There is no STOP, PAUSE serves that purpose instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To implement ASoC PCM operations, DSP path handling is needed. With path
template concept present, information carried by topology file can be
converted into runtime path representation. Each may be composed of
several pipelines and each pipeline can contain a number of processing
modules inside. Number of templates and variants found within topology
may vastly outnumber the total amount of pipelines and modules supported
by AudioDSP firmware simultaneously (in runtime) so none of the IDs are
specified in the topology. These are assigned dynamically when needed
and account for limitations described by FIRMWARE_CONFIG and
HARDWARE_CONFIG basefw parameters.
Paths are created on ->hw_params() and are freed on ->hw_free() ALSA PCM
operations. This choice is based on firmware expectations - need for
complete set of information when attempting to instantiate pipelines and
modules on AudioDSP side. With DMA and audio format provided, search
mechanism tests all path variants available in given path template until
a matching variant is found. Once found, information already available
is combined with all avs_tplg_* pieces pointed by matching path variant.
This finally allows to begin a cascade of IPCs which goal is to reserve
resources and prepare DSP for upcoming audio streaming.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
