Add BPF token support to BPF object-level functionality.
BPF token is supported by BPF object logic either as an explicitly
provided BPF token from outside (through BPF FS path or explicit BPF
token FD), or implicitly (unless prevented through
bpf_object_open_opts).
Implicit mode is assumed to be the most common one for user namespaced
unprivileged workloads. The assumption is that privileged container
manager sets up default BPF FS mount point at /sys/fs/bpf with BPF token
delegation options (delegate_{cmds,maps,progs,attachs} mount options).
BPF object during loading will attempt to create BPF token from
/sys/fs/bpf location, and pass it for all relevant operations
(currently, map creation, BTF load, and program load).
In this implicit mode, if BPF token creation fails due to whatever
reason (BPF FS is not mounted, or kernel doesn't support BPF token,
etc), this is not considered an error. BPF object loading sequence will
proceed with no BPF token.
In explicit BPF token mode, user provides explicitly either custom BPF
FS mount point path or creates BPF token on their own and just passes
token FD directly. In such case, BPF object will either dup() token FD
(to not require caller to hold onto it for entire duration of BPF object
lifetime) or will attempt to create BPF token from provided BPF FS
location. If BPF token creation fails, that is considered a critical
error and BPF object load fails with an error.
Libbpf provides a way to disable implicit BPF token creation, if it
causes any troubles (BPF token is designed to be completely optional and
shouldn't cause any problems even if provided, but in the world of BPF
LSM, custom security logic can be installed that might change outcome
dependin on the presence of BPF token). To disable libbpf's default BPF
token creation behavior user should provide either invalid BPF token FD
(negative), or empty bpf_token_path option.
BPF token presence can influence libbpf's feature probing, so if BPF
object has associated BPF token, feature probing is instructed to use
BPF object-specific feature detection cache and token FD.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust feature probing callbacks to take into account optional token_fd.
In unprivileged contexts, some feature detectors would fail to detect
kernel support just because BPF program, BPF map, or BTF object can't be
loaded due to privileged nature of those operations. So when BPF object
is loaded with BPF token, this token should be used for feature probing.
This patch is setting support for this scenario, but we don't yet pass
non-zero token FD. This will be added in the next patch.
We also switched BPF cookie detector from using kprobe program to
tracepoint one, as tracepoint is somewhat less dangerous BPF program
type and has higher likelihood of being allowed through BPF token in the
future. This change has no effect on detection behavior.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's quite a lot of well isolated code, so it seems like a good
candidate to move it out of libbpf.c to reduce its size.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add feat_supported() helper that accepts feature cache instead of
bpf_object. This allows low-level code in bpf.c to not know or care
about higher-level concept of bpf_object, yet it will be able to utilize
custom feature checking in cases where BPF token might influence the
outcome.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Split a list of supported feature detectors with their corresponding
callbacks from actual cached supported/missing values. This will allow
to have more flexible per-token or per-object feature detectors in
subsequent refactorings.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
=== Motivation ===
Similar to reading from CO-RE bitfields, we need a CO-RE aware bitfield
writing wrapper to make the verifier happy.
Two alternatives to this approach are:
1. Use the upcoming `preserve_static_offset` [0] attribute to disable
CO-RE on specific structs.
2. Use broader byte-sized writes to write to bitfields.
(1) is a bit hard to use. It requires specific and not-very-obvious
annotations to bpftool generated vmlinux.h. It's also not generally
available in released LLVM versions yet.
(2) makes the code quite hard to read and write. And especially if
BPF_CORE_READ_BITFIELD() is already being used, it makes more sense to
to have an inverse helper for writing.
=== Implementation details ===
Since the logic is a bit non-obvious, I thought it would be helpful
to explain exactly what's going on.
To start, it helps by explaining what LSHIFT_U64 (lshift) and RSHIFT_U64
(rshift) is designed to mean. Consider the core of the
BPF_CORE_READ_BITFIELD() algorithm:
val <<= __CORE_RELO(s, field, LSHIFT_U64);
val = val >> __CORE_RELO(s, field, RSHIFT_U64);
Basically what happens is we lshift to clear the non-relevant (blank)
higher order bits. Then we rshift to bring the relevant bits (bitfield)
down to LSB position (while also clearing blank lower order bits). To
illustrate:
Start: ........XXX......
Lshift: XXX......00000000
Rshift: 00000000000000XXX
where `.` means blank bit, `0` means 0 bit, and `X` means bitfield bit.
After the two operations, the bitfield is ready to be interpreted as a
regular integer.
Next, we want to build an alternative (but more helpful) mental model
on lshift and rshift. That is, to consider:
* rshift as the total number of blank bits in the u64
* lshift as number of blank bits left of the bitfield in the u64
Take a moment to consider why that is true by consulting the above
diagram.
With this insight, we can now define the following relationship:
bitfield
_
| |
0.....00XXX0...00
| | | |
|______| | |
lshift | |
|____|
(rshift - lshift)
That is, we know the number of higher order blank bits is just lshift.
And the number of lower order blank bits is (rshift - lshift).
Finally, we can examine the core of the write side algorithm:
mask = (~0ULL << rshift) >> lshift; // 1
val = (val & ~mask) | ((nval << rpad) & mask); // 2
1. Compute a mask where the set bits are the bitfield bits. The first
left shift zeros out exactly the number of blank bits, leaving a
bitfield sized set of 1s. The subsequent right shift inserts the
correct amount of higher order blank bits.
2. On the left of the `|`, mask out the bitfield bits. This creates
0s where the new bitfield bits will go. On the right of the `|`,
bring nval into the correct bit position and mask out any bits
that fall outside of the bitfield. Finally, by bor'ing the two
halves, we get the final set of bits to write back.
[0]: https://reviews.llvm.org/D133361
Co-developed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Jonathan Lemon <jlemon@aviatrix.com>
Signed-off-by: Jonathan Lemon <jlemon@aviatrix.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/4d3dd215a4fd57d980733886f9c11a45e1a9adf3.1702325874.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Before the change on `i686-linux` `systemd` build failed as:
$ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22)
After the change it fails as:
$ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
libbpf: ELF section #9 has inconsistent alignment addr=8 != d=4 in src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22)
Now it's slightly easier to figure out what is wrong with an ELF file.
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231208215100.435876-1-slyich@gmail.com
In libbpf, when determining whether we need to load vmlinux btf, we're
currently (among other things) checking whether there is any struct_ops
program present in the object. This works for most realistic struct_ops
maps, as a struct_ops map is of course typically composed of one or more
struct_ops programs. However, that technically need not be the case. A
struct_ops interface could be defined which allows a map to be specified
which one or more non-prog fields, and which provides default behavior
if no struct_ops progs is actually provided otherwise. For sched_ext,
for example, you technically only need to specify the name of the
scheduler in the struct_ops map, with the core scheduler logic providing
default behavior if no prog is actually specified.
If we were to define and try to load such a struct_ops map, we would
crash in libbpf when initializing it as obj->btf_vmlinux will be NULL:
Reading symbols from minimal...
(gdb) r
Starting program: minimal_example
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x000055555558308c in btf__type_cnt (btf=0x0) at btf.c:612
612 return btf->start_id + btf->nr_types;
(gdb) bt
type_name=0x5555555d99e3 "sched_ext_ops", kind=4) at btf.c:914
kind=4) at btf.c:942
type=0x7fffffffe558, type_id=0x7fffffffe548, ...
data_member=0x7fffffffe568) at libbpf.c:948
kern_btf=0x0) at libbpf.c:1017
at libbpf.c:8059
So as to account for such bare-bones struct_ops maps, let's update
obj_needs_vmlinux_btf() to also iterate over an obj's maps and check
whether any of them are struct_ops maps.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231208061704.400463-1-void@manifault.com
Allow user to specify token_fd for bpf_btf_load() API that wraps
kernel's BPF_BTF_LOAD command. This allows loading BTF from unprivileged
process as long as it has BPF token allowing BPF_BTF_LOAD command, which
can be created and delegated by privileged process.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-15-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We need to get offsets for static variables in following changes,
so making elf_resolve_syms_offsets to take st_type value as argument
and passing it to elf_sym_iter_new.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231125193130.834322-2-jolsa@kernel.org
This adds bpf_program__attach_netkit() API to libbpf. Overall it is very
similar to tcx. The API looks as following:
LIBBPF_API struct bpf_link *
bpf_program__attach_netkit(const struct bpf_program *prog, int ifindex,
const struct bpf_netkit_opts *opts);
The struct bpf_netkit_opts is done in similar way as struct bpf_tcx_opts
for supporting bpf_mprog control parameters. The attach location for the
primary and peer device is derived from the program section "netkit/primary"
and "netkit/peer", respectively.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Fix too eager assumption that SHT_GNU_verdef ELF section is going to be
present whenever binary has SHT_GNU_versym section. It seems like either
SHT_GNU_verdef or SHT_GNU_verneed can be used, so failing on missing
SHT_GNU_verdef actually breaks use cases in production.
One specific reported issue, which was used to manually test this fix,
was trying to attach to `readline` function in BASH binary.
Fixes: bb7fa09399 ("libbpf: Support symbol versioning for uprobe")
Reported-by: Liam Wisehart <liamwisehart@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Manu Bretelle <chantr4@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20231016182840.4033346-1-andrii@kernel.org
Golang symbols in ELF files are different from C/C++
which contains special characters like '*', '(' and ')'.
With generics, things get more complicated, there are
symbols like:
github.com/cilium/ebpf/internal.(*Deque[go.shape.interface { Format(fmt.State, int32); TypeName() string;github.com/cilium/ebpf/btf.copy() github.com/cilium/ebpf/btf.Type}]).Grow
Matching such symbols using `%m[^\n]` in sscanf, this
excludes newline which typically does not appear in ELF
symbols. This should work in most use-cases and also
work for unicode letters in identifiers. If newline do
show up in ELF symbols, users can still attach to such
symbol by specifying bpf_uprobe_opts::func_name.
A working example can be found at this repo ([0]).
[0]: https://github.com/chenhengqi/libbpf-go-symbols
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230929155954.92448-1-hengqi.chen@gmail.com
Add ring__avail_data_size for querying the currently available data in
the ringbuffer, similar to the BPF_RB_AVAIL_DATA flag in
bpf_ringbuf_query. This is racy during ongoing operations but is still
useful for overall information on how a ringbuffer is behaving.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-8-martin.kelly@crowdstrike.com
Switch rb->rings to be an array of pointers instead of a contiguous
block. This allows for each ring pointer to be stable after
ring_buffer__add is called, which allows us to expose struct ring * to
the user without gotchas. Without this change, the realloc in
ring_buffer__add could invalidate a struct ring *, making it unsafe to
give to the user.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-3-martin.kelly@crowdstrike.com
Refactor the cleanup code in ring_buffer__add to use a unified err_out
label. This reduces code duplication, as well as plugging a potential
leak if mmap_sz != (__u64)(size_t)mmap_sz (currently this would miss
unmapping tmp because ringbuf_unmap_ring isn't called).
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-2-martin.kelly@crowdstrike.com
In current implementation, we assume that symbol found in .dynsym section
would have a version suffix and use it to compare with symbol user supplied.
According to the spec ([0]), this assumption is incorrect, the version info
of dynamic symbols are stored in .gnu.version and .gnu.version_d sections
of ELF objects. For example:
$ nm -D /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
000000000009b1a0 T __pthread_rwlock_wrlock@GLIBC_2.2.5
000000000009b1a0 T pthread_rwlock_wrlock@@GLIBC_2.34
000000000009b1a0 T pthread_rwlock_wrlock@GLIBC_2.2.5
$ readelf -W --dyn-syms /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
706: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 __pthread_rwlock_wrlock@GLIBC_2.2.5
2568: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@@GLIBC_2.34
2571: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@GLIBC_2.2.5
In this case, specify pthread_rwlock_wrlock@@GLIBC_2.34 or
pthread_rwlock_wrlock@GLIBC_2.2.5 in bpf_uprobe_opts::func_name won't work.
Because the qualified name does NOT match `pthread_rwlock_wrlock` (without
version suffix) in .dynsym sections.
This commit implements the symbol versioning for dynsym and allows user to
specify symbol in the following forms:
- func
- func@LIB_VERSION
- func@@LIB_VERSION
In case of symbol conflicts, error out and users should resolve it by
specifying a qualified name.
[0]: https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/symversion.html
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230918024813.237475-3-hengqi.chen@gmail.com
Dynamic symbols in shared library may have the same name, for example:
$ nm -D /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
000000000009b1a0 T __pthread_rwlock_wrlock@GLIBC_2.2.5
000000000009b1a0 T pthread_rwlock_wrlock@@GLIBC_2.34
000000000009b1a0 T pthread_rwlock_wrlock@GLIBC_2.2.5
$ readelf -W --dyn-syms /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
706: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 __pthread_rwlock_wrlock@GLIBC_2.2.5
2568: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@@GLIBC_2.34
2571: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@GLIBC_2.2.5
Currently, users can't attach a uprobe to pthread_rwlock_wrlock because
there are two symbols named pthread_rwlock_wrlock and both are global
bind. And libbpf considers it as a conflict.
Since both of them are at the same offset we could accept one of them
harmlessly. Note that we already does this in elf_resolve_syms_offsets.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230918024813.237475-2-hengqi.chen@gmail.com
Add support to libbpf to append exception callbacks when loading a
program. The exception callback is found by discovering the declaration
tag 'exception_callback:<value>' and finding the callback in the value
of the tag.
The process is done in two steps. First, for each main program, the
bpf_object__sanitize_and_load_btf function finds and marks its
corresponding exception callback as defined by the declaration tag on
it. Second, bpf_object__reloc_code is modified to append the indicated
exception callback at the end of the instruction iteration (since
exception callback will never be appended in that loop, as it is not
directly referenced).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-16-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor bpf_object__append_subprog_code out of bpf_object__reloc_code
to be able to reuse it to append subprog related code for the exception
callback to the main program.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-15-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extracting btf_int_encoding() is only meaningful for BTF_KIND_INT, so we
need to check that first before inferring signedness.
Closes: https://github.com/libbpf/libbpf/issues/704
Reported-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824000016.2658017-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
For bpf_object__pin_programs() there is bpf_object__unpin_programs().
Likewise bpf_object__unpin_maps() for bpf_object__pin_maps().
But no bpf_object__unpin() for bpf_object__pin(). Adding the former adds
symmetry to the API.
It's also convenient for cleanup in application code. It's an API I
would've used if it was available for a repro I was writing earlier.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/b2f9d41da4a350281a0b53a804d11b68327e14e5.1692832478.git.dxu@dxuuu.xyz
I hit a memory leak when testing bpf_program__set_attach_target().
Basically, set_attach_target() may allocate btf_vmlinux, for example,
when setting attach target for bpf_iter programs. But btf_vmlinux
is freed only in bpf_object_load(), which means if we only open
bpf object but not load it, setting attach target may leak
btf_vmlinux.
So let's free btf_vmlinux in bpf_object__close() anyway.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230822193840.1509809-1-haoluo@google.com
Adding support for usdt_manager_attach_usdt to use uprobe_multi
link to attach to usdt probes.
The uprobe_multi support is detected before the usdt program is
loaded and its expected_attach_type is set accordingly.
If uprobe_multi support is detected the usdt_manager_attach_usdt
gathers uprobes info and calls bpf_program__attach_uprobe to
create all needed uprobes.
If uprobe_multi support is not detected the old behaviour stays.
Also adding usdt.s program section for sleepable usdt probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-18-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe-multi link detection. It will be used later in
bpf_program__attach_usdt function to check and use uprobe_multi
link over standard uprobe links.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-17-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support for several uprobe_multi program sections
to allow auto attach of multi_uprobe programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding bpf_program__attach_uprobe_multi function that
allows to attach multiple uprobes with uprobe_multi link.
The user can specify uprobes with direct arguments:
binary_path/func_pattern/pid
or with struct bpf_uprobe_multi_opts opts argument fields:
const char **syms;
const unsigned long *offsets;
const unsigned long *ref_ctr_offsets;
const __u64 *cookies;
User can specify 2 mutually exclusive set of inputs:
1) use only path/func_pattern/pid arguments
2) use path/pid with allowed combinations of:
syms/offsets/ref_ctr_offsets/cookies/cnt
- syms and offsets are mutually exclusive
- ref_ctr_offsets and cookies are optional
Any other usage results in error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-15-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new uprobe_multi struct to bpf_link_create_opts object
to pass multiple uprobe data to link_create attr uapi.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-14-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf_resolve_pattern_offsets function that looks up
offsets for symbols specified by pattern argument.
The 'pattern' argument allows wildcards (*?' supported).
Offsets are returned in allocated array together with its
size and needs to be released by the caller.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-13-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf_resolve_syms_offsets function that looks up
offsets for symbols specified in syms array argument.
Offsets are returned in allocated array with the 'cnt' size,
that needs to be released by the caller.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-12-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf symbol iterator object (and some functions) that follow
open-coded iterator pattern and some functions to ease up iterating
elf object symbols.
The idea is to iterate single symbol section with:
struct elf_sym_iter iter;
struct elf_sym *sym;
if (elf_sym_iter_new(&iter, elf, binary_path, SHT_DYNSYM))
goto error;
while ((sym = elf_sym_iter_next(&iter))) {
...
}
I considered opening the elf inside the iterator and iterate all symbol
sections, but then it gets more complicated wrt user checks for when
the next section is processed.
Plus side is the we don't need 'exit' function, because caller/user is
in charge of that.
The returned iterated symbol object from elf_sym_iter_next function
is placed inside the struct elf_sym_iter, so no extra allocation or
argument is needed.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf_open/elf_close functions and using it in
elf_find_func_offset_from_file function. It will be
used in following changes to save some common code.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-10-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new elf object that will contain elf related functions.
There's no functional change.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new uprobe_multi attach type and link names,
so the functions can resolve the new values.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-8-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The function signature of kfuncs can change at any time due to their
intentional lack of stability guarantees. As kfuncs become more widely
used, BPF program writers will need facilities to support calling
different versions of a kfunc from a single BPF object. Consider this
simplified example based on a real scenario we ran into at Meta:
/* initial kfunc signature */
int some_kfunc(void *ptr)
/* Oops, we need to add some flag to modify behavior. No problem,
change the kfunc. flags = 0 retains original behavior */
int some_kfunc(void *ptr, long flags)
If the initial version of the kfunc is deployed on some portion of the
fleet and the new version on the rest, a fleetwide service that uses
some_kfunc will currently need to load different BPF programs depending
on which some_kfunc is available.
Luckily CO-RE provides a facility to solve a very similar problem,
struct definition changes, by allowing program writers to declare
my_struct___old and my_struct___new, with ___suffix being considered a
'flavor' of the non-suffixed name and being ignored by
bpf_core_type_exists and similar calls.
This patch extends the 'flavor' facility to the kfunc extern
relocation process. BPF program writers can now declare
extern int some_kfunc___old(void *ptr)
extern int some_kfunc___new(void *ptr, int flags)
then test which version of the kfunc exists with bpf_ksym_exists.
Relocation and verifier's dead code elimination will work in concert as
expected, allowing this pattern:
if (bpf_ksym_exists(some_kfunc___old))
some_kfunc___old(ptr);
else
some_kfunc___new(ptr, 0);
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230817225353.2570845-1-davemarchevsky@fb.com
Enable the close-on-exec flag when using gzopen. This is especially important
for multithreaded programs making use of libbpf, where a fork + exec could
race with libbpf library calls, potentially resulting in a file descriptor
leaked to the new process. This got missed in 59842c5451 ("libbpf: Ensure
libbpf always opens files with O_CLOEXEC").
Fixes: 59842c5451 ("libbpf: Ensure libbpf always opens files with O_CLOEXEC")
Signed-off-by: Marco Vedovati <marco.vedovati@crowdstrike.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230810214350.106301-1-martin.kelly@crowdstrike.com
