Runtime PM can happen pretty frequently, as these printings
may be annoyed, switch to dev_dbg.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When transitioning FRL / DP2 is not required, we will always request
DTBCLK = 0Mhz, but PMFW returns the min freq
- This causes us to make DTBCLK requests every time we call optimize
after transitioning from FRL to non-FRL
- If DTBCLK is not required, request the min instead (then we only need
to make 1 extra request at boot time)
- Also when programming PIPE_DTO_SRC_SEL, don't programming for DP
first, just programming once for the required selection (programming
DP on an HDMI connection then switching back causes corruption)
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Tests need to tell if display is connected via USB4 DPIA link.
Currently this is only possible via analyzing dmesg logs.
[How]
Create a per-connector debugfs entry to report if the link is
tunneled via USB4 DPIA.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Output transfer function must be programmed per pipe as part of a front end
update when the plane changes, or output transfer function changes for a
given plane.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Calculations for determining DCC meta size should be pitch*height*bpp/256.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Need to subtract unused section of the viewport when calculating required space
in MALL for subvp instead of adding, to prevent over allocation.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When entering into a SubVP config that requires a minimal
transition we need to retain phantom pipes and also restore
the mall config
- This is because the min transition will remove phantom pipes
from the context (shallow copy) and not restore it's original
state
- This is just a workaround, and needs a proper fix
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- This is a workaround to avoid concurrency issues -- a fast update
creates a shallow copy of the dc current_state, and removes all
subvp/phantom related flags.
- We want to prevent the fast update thread from removing those
flags in case there's another thread running that requires
the info for proper programming
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'commit 52e4fdf09ebc ("drm/amd/display: use low clocks for no plane
configs")' introduced a change that set low clock values for DCN31 and
DCN32. As a result of these changes, DC started to spam the log with the
following warning:
------------[ cut here ]------------
WARNING: CPU: 8 PID: 1486 at
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dccg.c:58
dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
[..]
CPU: 8 PID: 1486 Comm: kms_atomic Tainted: G W 5.18.0+ #1
RIP: 0010:dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
RSP: 0018:ffffbbd8025334d0 EFLAGS: 00010206
RAX: 00000000000001ee RBX: ffffa02c87dd3de0 RCX: 00000000000a7f80
RDX: 000000000007dec3 RSI: 0000000000000000 RDI: ffffa02c87dd3de0
RBP: ffffbbd8025334e8 R08: 0000000000000001 R09: 0000000000000005
R10: 00000000000331a0 R11: ffffffffc0b03d80 R12: ffffa02ca576d000
R13: ffffa02cd02c0000 R14: 00000000001453bc R15: ffffa02cdc280000
[..]
dcn20_update_clocks_update_dpp_dto+0x4e/0xa0 [amdgpu]
dcn32_update_clocks+0x5d9/0x650 [amdgpu]
dcn20_prepare_bandwidth+0x49/0x100 [amdgpu]
dcn30_prepare_bandwidth+0x63/0x80 [amdgpu]
dc_commit_state_no_check+0x39d/0x13e0 [amdgpu]
dc_commit_streams+0x1f9/0x3b0 [amdgpu]
dc_commit_state+0x37/0x120 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x5e5/0x2520 [amdgpu]
? _raw_spin_unlock_irqrestore+0x1f/0x40
? down_trylock+0x2c/0x40
? vprintk_emit+0x186/0x2c0
? vprintk_default+0x1d/0x20
? vprintk+0x4e/0x60
We can easily trigger this issue by using a 4k@120 or a 2k@165 and
running some of the kms_atomic tests. This warning is triggered because
the per-pipe clock update is not happening; this commit fixes this issue
by ensuring that DPPCLK is updated when calculating the watermark and
dlg is invoked.
Fixes: 2641c7b780 ("drm/amd/display: use low clocks for no plane configs")
Reported-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fix was intended for improving on coding style but in the process
uncovers a race condition, which explains why we are getting incorrect
length in DPIA AUX replies. Due to the call path of DPIA AUX going from
DC back to DM layer then again into DC and the added complexities on top
of current DC AUX implementation, a proper fix to rely on current dc_lock
to address the race condition is difficult without a major overhual
on how DPIA AUX is implemented.
[How]
- Add a mutex dpia_aux_lock to protect DPIA AUX transfers
- Remove DMUB_ASYNC_TO_SYNC_ACCESS_* codes and rely solely on
aux_return_code_type for error reporting and handling
- Separate SET_CONFIG from DPIA AUX transfer because they have quiet
different processing logic
- Remove unnecessary type casting to and from void * type
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
MALL SS allocation calculations should iterate over all pipes to determine the
the allocation size required for HW cursor.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
-Program output transfer function when required
-Fix arthmetic errror in MALL size caluclations for subvp
-DCC Meta pitch used for MALL allocation
-Debugfs entry to tell if connector is DPIA link
-Use largest vready_offset in pipe group
-Fixes race condition in DPIA Aux transfer
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Corruption can occur in LB if vready_offset is not large enough.
DML calculates vready_offset for each pipe, but we currently select the
top pipe's vready_offset, which is not necessarily enough for all pipes
in the group.
[HOW]
Wherever program_global_sync is currently called, iterate through the
entire pipe group and find the highest vready_offset.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We re-arranged this code recently so "ret" is always zero at this point.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The logical operator '&&' will make
smu->ppt_funcs->set_gfx_power_up_by_imu segment fault when
smu->ppt_funcs is NULL.
Signed-off-by: Yu Songping <yusongping@huawei.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corrected the typo in the 4K resolution parameters.
Fixes: b3a24461f9 ("amdgpu/nv.c - Added codec query for Beige Goby")
Fixes: 9075096b09 ("amdgpu/nv.c - Optimize code for video codec support structure")
Fixes: 9ac0edaa0f ("drm/amdgpu: add vcn_4_0_0 video codec query")
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_get_xgmi_hive(), we should not call kfree() after
kobject_put() as the PUT will call kfree().
In amdgpu_device_ip_init(), we need to check the returned *hive*
which can be NULL before we dereference it.
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable PSP FW loading for PSP IP v13.0.11
Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enable VCN PG, CG and JPEG PG, CG
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this patch is to enable nbio support for NBIO v7.7.1.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU IP v13.0.4 ppt interface is shared by IP v13.0.11, they use
the different mailbox register offset. So use the specific mailbox
registers offset for v13.0.4.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the default reset method to mode2 for SMU IP v13.0.11
Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the SMU IP v13.0.11 GFXOFF control
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this patch to add smu 13 support for smu 13.0.11.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the entry to set the ppt functions for SMU IP v13.0.11.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial support for GC 11.0.4 in KFD compute driver.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gmc v11 support for GC 11.0.4.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add common soc21 ip block support for GC 11.0.4.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this patch to add GC 11.0.4 gfx support to gfx11 implementation.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the APU flag appropriately for GC 11.0.4.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this patch is to set GC 11.0.4 family.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add PSP IP v13.0.11 ip discovery support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this patch is to enable mes for GC 11.0.4.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable soc21 common for GC 11.0.4.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vram_usagebyfirmware v2_2 is only used in SRIOV case, skip the related
settings in bare-metal case currently.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an explicit printing to tell when finishing rpm execution
in amdgpu.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After executing BACO exit, driver needs to poll the status
to ensure FW has completed BACO exit sequence to prevent
timing issue.
v2: use usleep_range to replace msleep to fix checkpatch.pl warnings
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return true early if ASIC is in BACO state already, no need
to talk to SMU. It can fix the issue that driver was not
calling BACO exit at all in runtime pm resume, and a timing
issue leading to a PCI AER error happened eventually.
Fixes: 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For vram_usagebyfirmware_v2_2, fw_vram_reserve is not used. So
fw_vram_usage_va is NULL, and cannot do virt data exchange
anymore. Should add drv_vram_usage_va to do virt data exchange
in vram_usagebyfirmware_v2_2 case. And refine some code style
checks in pre add vram reservation logic patch
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-fixes for v6.1-rc7:
- Another amdgpu gang submit fix.
- Use dma_fence_unwrap_for_each when importing sync files.
- Fix race in dma_heap_add().
- Fix use of uninitialized memory in logo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a5721505-4823-98ef-7d6f-0ea478221391@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmN6wAgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0EYH/3/RO90NbrFItraN
Lzr+d3VdbGjTu8xd1M+PRTmwh3zxLpB+Jwqr0T0A2gzL9B/D+AUPUJdrCVbv9DqS
FLJAVqoeV20dNBAHSffOOLPsgCZ+Eu+LzlNN7Iqde0e8cyZICFMNktitui84Xm/i
1NgFVgz9OZ6+aieYvUj3FrFq0p8GTIaC/oybDZrxYKcO8ZzKVMJ11swRw10wwq0g
qOOECvV3w7wlQ8upQZkzFxItKFc7EexZI6R4elXeGSJJ9Hlc092dv/zsKB9dwV+k
WcwkJrZRoezYXzgGBFxUcQtzi+ethjrPjuJuM1rYLUSIcfIW/0lkaSLgRoBu8D+I
1GfXkXs=
=gt6P
-----END PGP SIGNATURE-----
Backmerge tag 'v6.1-rc6' into drm-next
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This partially reverts 20543be93c.
Calling drm_connector_update_edid_property() in
amdgpu_connector_free_edid() causes a noticeable pause in
the system every 10 seconds on polled outputs so revert this
part of the change.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2257
Cc: Claudio Suarez <cssk@net-c.es>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver is MIT, so add the licenses.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2265
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Configure related settings to enable it.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the topology-locked part of kfd_topology_add_device into a separate
function to simlpify error handling and release the topology lock
consistently.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felix Kuehling <felix.kuehling@gmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
