mtk_dp_driver is only used in mtk_dp.c now, change it
to static.
Fixes: f70ac097a2 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913134929.1970187-1-yangyingliang@huawei.com
In order to improve human readability, reduce the indentation by
returning early if the dp/edp cable is not plugged in.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-2-rex-bc.chen@mediatek.com
This patch adds audio support to the DP driver for MT8195 with up to 8
channels.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-11-rex-bc.chen@mediatek.com
From the DP spec 1.4a chapter 3.3, upstream devices should implement
HPD signal de-bouncing on an external connection.
A period of 100ms should be used to detect an HPD connect event.
To cover these cases, HPD de-bounce should be implemented only after
HPD low has been detected for at least 100ms.
Therefore,
1. If HPD is low (which means plugging out) for longer than 100ms:
we need to do de-bouncing (which means we need to wait for 100ms).
2. If HPD low is for less than 100ms:
we don't need to care about the de-bouncing.
In this patch, we start a 100ms timer and use a need_debounce boolean
to implement the feature.
Two cases when HPD is high:
1. If the timer is expired (>100ms):
- need_debounce is true.
- When HPD high (plugging event comes), need_debounce will be true
and then we need to do de-bouncing (wait for 100ms).
2. If the timer is not expired (<100ms):
- need_debounce is false.
- When HPD high (plugging event comes), need_debounce will be false
and no need to do de-bouncing.
HPD_______ __________________
| |<- 100ms ->
|____________|
<- 100ms ->
Without HPD de-bouncing, USB-C to HDMI Adapaters will not be detected.
The change has been successfully tested with the following devices:
- Dell Adapter - USB-C to HDMI
- Acer 1in1 HDMI dongle
- Ugreen 1in1 HDMI dongle
- innowatt HDMI + USB3 hub
- Acer 2in1 HDMI dongle
- Apple 3in1 HDMI dongle (A2119)
- J5Create 3in1 HDMI dongle (JAC379)
Tested-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-10-rex-bc.chen@mediatek.com
Add External DisplayPort support to the MT8195 eDP driver.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-9-rex-bc.chen@mediatek.com
It's not necessary to have a next_bridge for DP device, so we add this
patch to judge this.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-8-rex-bc.chen@mediatek.com
The calibration data formats of eDP and DP are different. We add
"const struct mtk_dp_efuse_fmt *efuse_fmt" to the device data to
define them.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-7-rex-bc.chen@mediatek.com
The smc commands of eDP and DP are different. We add smc_cmd to the
device data to define them.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-6-rex-bc.chen@mediatek.com
The bridge types of eDP and DP are different. We add device data to
this driver and add bridge_type to the device data to define them.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-5-rex-bc.chen@mediatek.com
This patch adds a embedded displayport driver for the MediaTek mt8195 SoC.
It supports the MT8195, the embedded DisplayPort units. It offers
DisplayPort 1.4 with up to 4 lanes.
The driver creates a child device for the phy. The child device will
never exist without the parent being active. As they are sharing a
register range, the parent passes a regmap pointer to the child so that
both can work with the same register range. The phy driver sets device
data that is read by the parent to get the phy device that can be used
to control the phy properties.
This driver is based on an initial version by
Jitao shi <jitao.shi@mediatek.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-4-rex-bc.chen@mediatek.com
