- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
The function hv_set_affinity was removed in commit 831c1ae7 ("PCI: hv:
Make the code arch neutral by adding arch specific interfaces").
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20221107171831.25283-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Now that the PCI/MSI core code does early checking for multi-MSI support
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS is not required anymore.
Remove the flag and rely on MSI_FLAG_MULTI_PCI_MSI.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.865042356@linutronix.de
What a zoo:
PCI_MSI
select GENERIC_MSI_IRQ
PCI_MSI_IRQ_DOMAIN
def_bool y
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
Ergo PCI_MSI enables PCI_MSI_IRQ_DOMAIN which in turn selects
GENERIC_MSI_IRQ_DOMAIN. So all the dependencies on PCI_MSI_IRQ_DOMAIN are
just an indirection to PCI_MSI.
Match the reality and just admit that PCI_MSI requires
GENERIC_MSI_IRQ_DOMAIN.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122014.467556921@linutronix.de
Jeffrey added Multi-MSI support to the pci-hyperv driver by the 4 patches:
08e61e861a ("PCI: hv: Fix multi-MSI to allow more than one MSI vector")
455880dfe2 ("PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI")
b4b77778ec ("PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()")
a2bad844a6 ("PCI: hv: Fix interrupt mapping for multi-MSI")
It turns out that the third patch (b4b77778ec) causes a performance
regression because all the interrupts now happen on 1 physical CPU (or two
pCPUs, if one pCPU doesn't have enough vectors). When a guest has many PCI
devices, it may suffer from soft lockups if the workload is heavy, e.g.,
see https://lwn.net/ml/linux-kernel/20220804025104.15673-1-decui@microsoft.com/
Commit b4b77778ec itself is good. The real issue is that the hypercall in
hv_irq_unmask() -> hv_arch_irq_unmask() ->
hv_do_hypercall(HVCALL_RETARGET_INTERRUPT...) only changes the target
virtual CPU rather than physical CPU; with b4b77778ec, the pCPU is
determined only once in hv_compose_msi_msg() where only vCPU0 is specified;
consequently the hypervisor only uses 1 target pCPU for all the interrupts.
Note: before b4b77778ec, the pCPU is determined twice, and when the pCPU
is determined the second time, the vCPU in the effective affinity mask is
used (i.e., it isn't always vCPU0), so the hypervisor chooses different
pCPU for each interrupt.
The hypercall will be fixed in future to update the pCPU as well, but
that will take quite a while, so let's restore the old behavior in
hv_compose_msi_msg(), i.e., don't reuse the existing IRTE allocation for
single-MSI and MSI-X; for multi-MSI, we choose the vCPU in a round-robin
manner for each PCI device, so the interrupts of different devices can
happen on different pCPUs, though the interrupts of each device happen on
some single pCPU.
The hypercall fix may not be backported to all old versions of Hyper-V, so
we want to have this guest side change forever (or at least till we're sure
the old affected versions of Hyper-V are no longer supported).
Fixes: b4b77778ec ("PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()")
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221104222953.11356-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The local variable 'vector' must be u32 rather than u8: see the
struct hv_msi_desc3.
'vector_count' should be u16 rather than u8: see struct hv_msi_desc,
hv_msi_desc2 and hv_msi_desc3.
Fixes: a2bad844a6 ("PCI: hv: Fix interrupt mapping for multi-MSI")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221027205256.17678-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
This reverts commit 8bb7ff12a9.
Commit 8bb7ff12a9 ("PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro")
updated the Tegra PCI driver to use the macro PCI_CONF1_EXT_ADDRESS()
instead of a local function in the Tegra PCI driver. This broke PCI for
some Tegra platforms because, when calculating the offset value, the mask
applied to the lower 8-bits changed from 0xff to 0xfc.
For now, fix this by reverting this commit.
Fixes: 8bb7ff12a9 ("PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro")
Link: https://lore.kernel.org/r/20221017084006.11770-1-jonathanh@nvidia.com
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pOqY
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better.
- Revert to a BAR assignment inherited from firmware only when the
address is actually reachable via any upstream bridges, which fixes
some cases where firmware doesn't configure all devices.
- Add a sysfs interface to resize BARs so this can be done before
assigning devices to a VM through VFIO.
Power management:
- Disable Precision Time Management for all devices on suspend to
enable lower-power PM state. We previously did this just for Root
Ports, which isn't enough because downstream devices can still
generate PTM messages, which cause errors if it's disabled in the
Root Port.
- Save and restore the ASPM L1 PM Substates configuration for
suspend/ resume. Previously this configuration was lost, so L1.x
states likely stopped working after resume.
- Check whether the L1 PM Substates Capability exists. If it didn't
exist, we previously read junk and tried to configure L1 Substates
based on that.
- Fix the LTR_L1.2_THRESHOLD computation, which previously set a
threshold for entering L1.2 that was too low in some cases.
- Reduce the delay after transitions to or from D3cold by using
usleep_range() rather than msleep(), which often slept for ~19ms
instead of the 10ms normally required. The spec says 10ms is
enough, but it's possible we could trip over devices that need a
little more.
Error handling:
- Work around a BIOS bug that caused Intel Root Ports to advertise a
Root Port Programmed I/O (RP PIO) log size of zero, which caused
annoying warnings and prevented the kernel from dumping log
registers for DPC errors.
Qualcomm PCIe controller driver:
- Add support for SC8280XP and SA8540P host controllers and SM8450
endpoint controller.
- Disable Master AXI clock on endpoint controllers to save power when
link is idle or in L1.x.
- Expose link state transition counts via debugfs to help debug
issues with low-power states.
- Add auto-loading module support.
Synopsys DesignWare PCIe controller driver:
- Remove a dependency on ZONE_DMA32 by allocating the MSI target page
differently. There's more work to do related to eDMA controllers,
so it's not completely settled"
* tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits)
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: Expose PCIe Resizable BAR support via sysfs
PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation
PCI/ASPM: Ignore L1 PM Substates if device lacks capability
PCI/ASPM: Factor out L1 PM Substates configuration
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Refactor L1 PM Substates Control Register programming
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
...
- Add macros for PCI Configuration Mechanism #1 and use them in the
ftpci100, mt7621, and tegra drivers (Pali Rohár)
* remotes/lorenzo/pci/misc:
PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro
PCI: mt7621: Use PCI_CONF1_EXT_ADDRESS() macro
PCI: ftpci100: Use PCI_CONF1_ADDRESS() macro
PCI: Add standard PCI Config Address macros
- List platforms that use a single MSI host interrupt in qcom DT (Johan
Hovold)
- Add SC8280XP, SA8540P support to qcom DT binding and driver(Johan Hovold)
- Make all optional clocks truly optional in the driver (Johan Hovold)
- Rename per-IP structs to reflect the IP version (Johan Hovold)
- Sort device ID match table by compatible string (Johan Hovold)
- Add MODULE_DEVICE_TABLE to enable module autoloading (Dmitry Baryshkov)
- Drop the unused .post_deinit() callback (Johan Hovold)
- Rely on DT for clock information instead of hard-coding it in the driver
(Manivannan Sadhasivam)
- Disable IRQs when removing driver to avoid spurious IRQs later
(Manivannan Sadhasivam)
- Expose link transition counts via debugfs to help debug issues with
low-power states (Manivannan Sadhasivam)
- Gate Master AXI clock to the MHI bus while in L1 substates to save power
(Manivannan Sadhasivam)
- Disable Master AXI clock to save power when there is no traffic on PCIe
(Manivannan Sadhasivam)
- Make the "PERST separation" debug feature optional in the DT and the
driver (Manivannan Sadhasivam)
- Define clocks to be per-platform in DT to prepare for future SoCs
(Manivannan Sadhasivam)
- Add SM8450 SoC support (Manivannan Sadhasivam)
- Check for platform_get_resource_byname() to avoid a NULL pointer
dereference (Yang Yingliang)
* pci/qcom:
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
PCI: qcom: Rename host-init error label
PCI: qcom: Drop unused post_deinit callback
PCI: qcom-ep: Add MODULE_DEVICE_TABLE
PCI: qcom: Sort device-id table
PCI: qcom: Clean up IP configurations
PCI: qcom: Make all optional clocks optional
PCI: qcom: Add support for SA8540P
PCI: qcom: Add support for SC8280XP
dt-bindings: PCI: qcom: Add SA8540P to binding
dt-bindings: PCI: qcom: Add SC8280XP to binding
dt-bindings: PCI: qcom: Enumerate platforms with single msi interrupt
- Rename the pcie-mediatek-gen3 driver from 'mtk-pcie' to 'mtk-pcie-gen3'
so it can coexist with the pcie-mediatek driver, which also uses
'mtk-pcie' (Felix Fietkau)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3
- Use dmam_alloc_coherent() instead of dma_map_page() to allocate the MSI
target page, which means dwc drivers will work even when ZONE_DMA32 is
disabled (Will McVicker)
- If we can't allocate an MSI target page with a 32-bit address, try
allocating one with a 64-bit address (Will McVicker)
- Switch from of_gpio_named_count() to generic gpiod_count() (Andy
Shevchenko)
- Add support for i.MX8MP PCIe (Richard Zhu)
- Fix the Freescale i.MX8 PHY driver, which had interchanged the phy_init()
and phy_power_on() interfaces (Richard Zhu)
* remotes/lorenzo/pci/dwc:
phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
PCI: imx6: Add i.MX8MP PCIe support
PCI: dwc: Replace of_gpio_named_count() by gpiod_count()
PCI: dwc: Drop dependency on ZONE_DMA32
- In an emulated PCI bridge, set Capability offsets so they match the
hardware offsets shown by U-Boot (Pali Rohár)
* remotes/lorenzo/pci/bridge-emul:
PCI: pci-bridge-emul: Set position of PCI capabilities to real HW value
- Switch from gpiod_get_from_of_node() to generic devm GPIO API (Dmitry
Torokhov)
* remotes/lorenzo/pci/apple:
PCI: apple: Do not leak reset GPIO on unbind/unload/error
If platform_get_resource_byname() fails, 'mmio_res' will be set to NULL
pointer, which causes a NULL pointer dereference when it is used in
qcom_pcie_perst_deassert().
Check the return value to prevent it.
Link: https://lore.kernel.org/r/20220429080740.1294797-1-yangyingliang@huawei.com
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Add support for SM8450 SoC to the Qualcomm PCIe Endpoint Controller
driver. The driver uses the same config as the existing SDX55 chipset,
so additional settings are not required.
Link: https://lore.kernel.org/r/20220914075350.7992-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PERST separation is an optional debug feature used to collect the crash
dump from the PCIe endpoint devices by the PCIe host when the endpoint
crashes. This feature keeps the PCIe link up by separating the PCIe IP
block from the SoC reset logic.
Make the property optional in the driver.
Link: https://lore.kernel.org/r/20220914075350.7992-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Master AXI clock can be disabled when it is not used i.e., when there
is no traffic on the PCIe bus. This helps to save power during idle state.
[bhelgaas: tidy and wrap comment]
Link: https://lore.kernel.org/r/20220914075350.7992-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Qualcomm PCIe controllers have debug registers in the MMIO region
that count PCIe link transitions. Expose them over debugfs to
userspace to help debug the low power issues.
Link: https://lore.kernel.org/r/20220914075350.7992-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Disable the Global and PERST IRQs during driver remove to avoid getting
spurious IRQs after resource deallocation.
Link: https://lore.kernel.org/r/20220914075350.7992-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
In the qcom_pcie_ep_get_resources() function, dev pointer is already
cached in a local variable. So let's make use of it instead of getting
the dev pointer again from pdev struct.
Link: https://lore.kernel.org/r/20220914075350.7992-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Generally, device drivers should just rely on the platform data like
devicetree to supply the clocks required for the functioning of the
peripheral. There is no need to hardcode the clk info in the driver.
So get rid of the static clk info and obtain the platform supplied
clks.
The total number of clocks supplied is obtained using the
devm_clk_bulk_get_all() API and used for the rest of the clk_bulk_ APIs.
Link: https://lore.kernel.org/r/20220914075350.7992-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Refer to phy_core driver, phy_init() must be called before phy_power_on().
Fix the wrong order of phy_init() and phy_power_on() here.
Link: https://lore.kernel.org/r/1662344583-18874-1-git-send-email-hongxing.zhu@nxp.com
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Add i.MX8MP PCIe support.
To avoid codes duplication when find the syscon regmap, add the iomux
gpr syscon compatible into drvdata.
Link: https://lore.kernel.org/r/1662109086-15881-8-git-send-email-hongxing.zhu@nxp.com
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.
Link: https://lore.kernel.org/r/20220830183310.48541-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Drop the unused and confusingly named post_deinit callback that was
added for the now removed pipe clock handling.
If ever needed we can add back a callback named pre_deinit (or perhaps
rather pre_phy_power_off) instead.
Link: https://lore.kernel.org/r/20220928155421.21660-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Simplify pci-ftpci100.c driver code and use new PCI_CONF1_ADDRESS() macro
for accessing PCI config space.
Link: https://lore.kernel.org/r/20220924092404.31776-3-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Register with Subsystem Device/Vendor ID is at offset 0x2c.
Export it via the emulated bridge to enable support for the Subsystem
Device/Vendor ID - by reading it in the PCI controller config space and
storing it in the emulated bridge control structures, so that it is
exposed in the respective PCI capability.
After this change Subsystem ID is visible in lspci output at line:
Capabilities: [40] Subsystem
Link: https://lore.kernel.org/r/20220711225915.13896-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The driver allocates reset GPIO in apple_pcie_setup_port() but neither
releases the resource, nor uses devm API to have it released
automatically.
Let's fix this by switching to devm API. While at it let's use generic
devm_fwnode_gpiod_get() instead of OF-specific gpiod_get_from_of_node()
- this will allow us top stop exporting the latter down the road.
Link: https://lore.kernel.org/r/YxatO5OaI2RpxQ2M@google.com
Fixes: 1e33888fbe ("PCI: apple: Add initial hardware bring-up")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hector Martin <marcan@marcan.st>
Acked-by: Marc Zyngier <maz@kernel.org>
Re-work the msi_msg DMA allocation logic to use dmam_alloc_coherent() which
uses the coherent DMA mask to try to return an allocation within the DMA
mask limits. With that, we now can drop the msi_page parameter in struct
dw_pcie_rp. This allows kernel configurations that disable ZONE_DMA32 to
continue supporting a 32-bit DMA mask. Without this patch, the PCIe host
device will fail to probe when ZONE_DMA32 is disabled.
Link: https://lore.kernel.org/r/20220825235404.4132818-2-willmcvicker@google.com
Fixes: 35797e672f ("PCI: dwc: Fix MSI msi_msg DMA mapping")
Reported-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
mvebu and aardvark HW have PCIe capabilities on different offset in PCI
config space. Extend pci-bridge-emul.c code to allow setting custom driver
custom value where PCIe capabilities starts.
With this change PCIe capabilities of both drivers are reported at the same
location as where they are reported by U-Boot - in their real HW offset.
Link: https://lore.kernel.org/r/20220824112124.21675-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
driver_register() will refuse to register another driver with the same name.
This change allows pcie-mediatek-gen3 to coexist with pcie-mediatek built into
the kernel.
Link: https://lore.kernel.org/r/20220505083907.86598-1-nbd@nbd.name
Fixes: d3bf75b579 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
PCI emul bridge members iolimitupper, iobaseupper, memlimit and membase
are of type __le16, so correctly access these members using
le16_to_cpu() macros.
Link: https://lore.kernel.org/r/20220812141115.24082-1-pali@kernel.org
Fixes: e7a0187672 ("PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Sort the device-id table entries alphabetically by compatible string to
make it easier to find entries and add new ones.
Link: https://lore.kernel.org/r/20220714071348.6792-9-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
The various IP versions have different configurations that are encoded
in separate sets of operation callbacks. Currently, there is no need for
also maintaining corresponding sets of data parameters, but it is
conceivable that these may again be found useful (e.g. to implement
minor variations of the operation callbacks).
Rename the default configuration structures after the IP version they
apply to so that they can more easily be reused by different SoCs.
Note that SoC specific configurations can be added later if need arises
(e.g. cfg_sc8280xp).
Link: https://lore.kernel.org/r/20220714071348.6792-8-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
The kernel is not a devicetree validator and does not need to re-encode
information which is already available in the devicetree.
This is specifically true for the optional PCIe clocks, some of which
are really interconnect clocks.
Treat also the 2.7.0 optional clocks as truly optional instead of
maintaining a list of clocks per compatible (including two compatible
strings for the two identical controllers on sm8450) just to validate
the devicetree.
Link: https://lore.kernel.org/r/20220714071348.6792-7-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
The SA8540P platform has five PCIe controllers: two 4-lane, two 2-lane
and one 1-lane.
Add a new "qcom,pcie-sa8540p" compatible string and reuse the 1.9.0 ops.
Note that like for SC8280XP, the SA8540P controllers need two or three
interconnect clocks to be enabled.
Link: https://lore.kernel.org/r/20220714071348.6792-6-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
The SC8280XP platform has seven PCIe controllers: two used with USB4,
two 4-lane, two 2-lane and one 1-lane.
Add a new "qcom,pcie-sc8280xp" compatible string and reuse the 1.9.0
ops.
Note that the SC8280XP controllers need two or three interconnect
clocks to be enabled. Model these as optional clocks to avoid encoding
devicetree data in the PCIe driver.
Note that the same could be done for the SM8450 interconnect clocks and
possibly also for the TBU clocks.
Link: https://lore.kernel.org/r/20220714071348.6792-5-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)
Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
and NTB EndPoint Function (EPF) support and the various fixes from that
being in -next for Linux v5.20
-----BEGIN PGP SIGNATURE-----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=DAah
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
ntb_mw_set_trans() will set memory map window after endpoint function
driver bind. The inbound map address need be updated dynamically when
using NTB by PCIe Root Port and PCIe Endpoint connection.
Checking if iatu already assigned to the BAR, if yes, using assigned iatu
number to update inbound address map and skip set BAR's register.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmLr+2wUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vxfZg//eChkC2EUdT6K3zuQDbJJhsGcuOQF
lnZuUyDn4xw7BkEoZf8V6YdAnp7VvgKhLOq1/q3Geu/LBbCaczoEogOCaR/WcVOs
C+MsN0RWZQtgfuZKncQoqp25NeLPK9PFToeiIX/xViAYZF7NVjDY7XQiZHQ6JkEA
/7cUqv/4nS3KCMsKjfmiOxGnqohMWtICiw9qjFvJ40PEDnNB1b53rkiVTxBFePpI
ePfsRfi/C7klE3xNfoiEgrPp+Jfw+oShsCwXUsId7bEL2oLBc7ClqP05ZYZD3bTK
QQYyZ12Cq8TysciYpUGBjBnywUHS5DIO5YaV3wxyVAR2Z+6GY2/QVjOa2kKvoK0o
Hba6TJf8bL58AhSI8Q62pBM0sS7dqJSff+9c2BGpZvII5spP/rQQLlJO56TJjwkw
Dlf0d3thhZOc9vSKjKw+0v0FdAyc4L11EOwUsw95jZeT5WWgqJYGFnWPZwqBI1KM
DI1E5wVO5tA2H3NEn+BTTHbLWL+UppqyXPXBHiW52b2q5Bt8fJWMsFvnEEjclxmG
pYCI7VgF8jqbYKxjobxPFY2x6PH9hfaGMxwzZSdOX6e/Eh+1esgyyaC5APpCO+Pp
e4OkJaOzCmggrD0jYeLWu+yDm5KRrYo5cdfKHrKgAof0Am41lAa1OhJ2iH4ckNqP
1qmHereDOe0zNVw=
=9TAR
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
- Drop of_match_ptr() to avoid unused variables when CONFIG_OF is unset
(Bjorn Helgaas)
- Fix ARM pci_remap_iospace() when CONFIG_MMU unset to avoid build errors
(Pali Rohár)
* pci/misc:
PCI/ACPI: Update link to PCI firmware specification
PCI: Drop of_match_ptr() to avoid unused variables
