SDMA FW fixes the hang issue for adding heavy-weight TLB
flush on Arcturus, so we can enable it.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debug VRAM access through SDMA has several broken parts resulting in
silent MMIO fallback.
BO kernel creation takes the location of the cpu addr pointer, not
the pointer itself for address kmap.
drm_dev_enter return true on success so change access check.
The source BO is reserved but not pinned so find the address using the
cursor offset relative to its memory domain start.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That's just a leftover from old radeon days and was preventing CS and GART
bindings before the hardware was initialized. But nowdays that is
perfectly valid.
The only thing we need to warn about are GART binding before the table
is even allocated.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove set but unused variable.
warning: variable 'umc_reg_offset' set but not used
Signed-off-by: mziya <Mohammadzafar.ziya@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch will modify a pair of functions for pcie port wreg/rreg.
AMD GPU have had an independent NBIO block from SOC15 arch.
If the dirver wants to read/write the address space of the pcie devices,
it has to go through the NBIO block.
This patch will move the pcie port wreg/rreg functions to
"amdgpu_device.c", so that to reuse the functions on the
future GPU ASICs.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch will add vram check function for GMC block.
It will write pattern data to the vram and then read back from the vram,
so that to verify the work status of vram.
This patch will cover gmc v6/7/8/9/10.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return value from amdgpu_bo_create_kernel() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fixes 892deb4826 ("drm/amdgpu: Separate vf2pf work item init from virt data exchange").
we should read pf2vf data based at mman.fw_vram_usage_va after gmc
sw_init. commit 892deb4826 breaks this logic.
[How]
calling amdgpu_virt_exchange_data in amdgpu_virt_init_data_exchange to
set the right base in the right sequence.
v2:
call amdgpu_virt_init_data_exchange after gmc sw_init to make data
exchange workqueue run
v3:
clean up the code logic
v4:
add some comment and make the code more readable
Fixes: 892deb4826 ("drm/amdgpu: Separate vf2pf work item init from virt data exchange")
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix the code style warnings in hdp xgmi mca and umc:
1. WARNING: missing space after struct definition.
2. WARNING: please, no space before tabs.
3. WARNING: line length of xxx exceeds 100 columns.
4. ERROR: "foo* bar" should be "foo *bar".
5. ERROR: space required before the open parenthesis '('.
6. ERROR: space prohibited after that open parenthesis '('.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the code style warnings in sdma:
1. WARNING: Missing a blank line after declarations.
2. ERROR: that open brace { should be on the previous line.
3. WARNING: unnecessary whitespace before a quoted newline.
4. ERROR: space required after that ',' (ctx:VxV).
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the code style warnings in gmc:
ERROR: space required after that ',' (ctx:VxV).
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the code style warnings in gfx:
1. WARNING: suspect code indent for conditional statements.
2. ERROR: spaces required around that '=' (ctx:WxV).
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the code style warnings in amdgpu_ras:
1. ERROR: space required before the open parenthesis '('.
2. WARNING: line length of xxx exceeds 100 columns.
3. ERROR: "foo* bar" should be "foo *bar".
4. WARNING: unnecessary whitespace before a quoted newline.
5. WARNING: space prohibited before semicolon.
6. WARNING: suspect code indent for conditional statements.
7. WARNING: braces {} are not necessary for single statement blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a following patch to apply the workaround only on
those boards with a bad harvest table in ip discovery.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Early check in amdgpu_discovery_reg_base_init promises this.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add smu message query error information interface,
function name align with IP version number
V2:
Removed unused err cnt entry
Signed-off-by: mziya <Mohammadzafar.ziya@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for IP based discovery is in place now so this
check is no longer required.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
eb4fd29afd ("drm/amdgpu: bind to any 0x1002 PCI diplay class device") added
generic bindings to amdgpu so that that it binds to all display class devices
with VID 0x1002 and then rejects those in amdgpu_pci_probe.
Unfortunately it reuses a driver_data value of 0 to detect those new bindings,
which is already used to denote CHIP_TAHITI ASICs.
The driver_data value given to those new bindings was changed in
dd0761fd24ea1 ("drm/amdgpu: set CHIP_IP_DISCOVERY as the asic type by default")
to CHIP_IP_DISCOVERY (=36), but it seems that the check in amdgpu_pci_probe
was forgotten to be changed. Therefore, it still rejects Tahiti GPUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1860
Fixes: eb4fd29afd ("drm/amdgpu: bind to any 0x1002 PCI diplay class device")
Signed-off-by: Lukas Fink <lukas.fink1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It can cause a hang. This is normally not enabled for GPU
hangs on these asics, but was recently enabled for handling
aborted suspends. This causes hangs on some platforms
on suspend.
Fixes: daf8de0874 ("drm/amdgpu: always reset the asic in suspend (v2)")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1858
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than opting into GPU recovery support, default to on, and
opt out if it's not working on a particular GPU. This avoids the
need to add new asics to this list since this is a core feature.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add yellow carp to devices which support recovery
Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ARRAY_SIZE to get array length.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2725:16-17: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer insert ras blocks into ras_list if it already exists in ras_list.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add interface to load SRIOV cap FW. If the FW does not
exist, simply skip this FW loading routine.
This FW will only be loaded under SRIOV. Other driver
configuration will not be affected.
By adding this interface, it will make us easier to
prepare SRIOV Linux guest driver for different users.
- Update sysfs interface to read cap FW version.
- Refactor PSP FW loading routine under SRIOV to use a
unified SWITCH statement instead of using IF statement
- Remove redundant amdgpu_sriov_vf() check in FW loading
routine
Acked-by: Monk Liu <monk.liu@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some suggested cleanups to declutter ttm when doing debug VRAM access over
SDMA.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For better performance during VRAM access for debugged processes, do
read/write copies over SDMA.
In order to fulfill post mortem debugging on a broken device, fallback to
stable MMIO access when gpu recovery is disabled or when job submission
time outs are set to max. Failed SDMA access should automatically fall
back to MMIO access.
Use a pre-allocated GTT bounce buffer pre-mapped into GART to avoid
page-table updates and TLB flushes on access.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Move xgmi special error inject function from amdgpu_ras.c to xgmi block.
2. Support to use psp_ras_trigger_error as default error inject function in amdgpu_ras.c. If .ras_error_inject isn't defined in ras block, default error inject function will take effect.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify mca block to fit for the unified ras block data and ops.
2.Define special .ras_block_match function for mca block to identify itself.
3.Change amdgpu_mca_ras_funcs to amdgpu_mca_ras_block(amdgpu_mca_ras had been used), and the corresponding variable name remove _funcs suffix.
4.Remove the const flag of cma ras variable so that cma ras block can be able to be inserted into amdgpu device ras block link list.
5.Invoke amdgpu_ras_register_ras_block function to register cma ras block into amdgpu device ras block link list.
6.Remove the redundant code about cma in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify sdma block to fit for the unified ras block data and ops.
2.Change amdgpu_sdma_ras_funcs to amdgpu_sdma_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of sdma ras variable so that sdma ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register sdma ras block into amdgpu device ras block link list.
5.Remove the redundant code about sdma in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of sdma versions. If .ras_late_init and .ras_fini had been defined by the selected sdma version, the defined functions will take effect; if not defined, default fill them with amdgpu_sdma_ras_late_init and amdgpu_sdma_ras_fini.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify umc block to fit for the unified ras block data and ops.
2.Change amdgpu_umc_ras_funcs to amdgpu_umc_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of umc ras variable so that umc ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register umc ras block into amdgpu device ras block link list.
5.Remove the redundant code about umc in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of umc versions. If .ras_late_init and .ras_fini had been defined by the selected umc version, the defined functions will take effect; if not defined, default fill them with amdgpu_umc_ras_late_init and amdgpu_umc_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify nbio block to fit for the unified ras block data and ops.
2.Change amdgpu_nbio_ras_funcs to amdgpu_nbio_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of mmhub ras variable so that nbio ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register nbio ras block into amdgpu device ras block link list.
5.Remove the redundant code about nbio in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify mmhub block to fit for the unified ras block data and ops.
2.Change amdgpu_mmhub_ras_funcs to amdgpu_mmhub_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of mmhub ras variable so that mmhub ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register mmhub ras block into amdgpu device ras block link list. 5.Remove the redundant code about mmhub in amdgpu_ras.c after using the unified ras block.
5.Remove the redundant code about mmhub in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of mmhub versions. If .ras_late_init and .ras_fini had been defined by the selected mmhub version, the defined functions will take effect; if not defined, default fill them with amdgpu_mmhub_ras_late_init and amdgpu_mmhub_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify hdp block to fit for the unified ras block data and ops.
2.Change amdgpu_hdp_ras_funcs to amdgpu_hdp_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of hdp ras variable so that hdp ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register hdp ras block into amdgpu device ras block link list.
5.Remove the redundant code about hdp in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify gmc block to fit for the unified ras block data and ops.
2.Change amdgpu_xgmi_ras_funcs to amdgpu_xgmi_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of gmc ras variable so that gmc ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register gmc ras block into amdgpu device ras block link list.
5.Remove the redundant code about gmc in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify gfx block to fit for the unified ras block data and ops.
2.Change amdgpu_gfx_ras_funcs to amdgpu_gfx_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of gfx ras variable so that gfx ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register gfx ras block into amdgpu device ras block link list.
5.Remove the redundant code about gfx in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of gfx versions. If .ras_late_init and .ras_fini had been defined by the selected gfx version, the defined functions will take effect; if not defined, default fill with amdgpu_gfx_ras_late_init and amdgpu_gfx_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify the compilation failed problem when other ras blocks' .h include amdgpu_ras.h.
v2: squash in forward declaration warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define unified ops interface for each block.
2. Add ras_block_match function pointer in ops interface, each ras block can customize specail match function to identify itself.
3. Add amdgpu_ras_block_match_default new function. If a ras block doesn't define .ras_block_match, default execute amdgpu_ras_block_match_default to identify this ras block.
4. Define unified basic ras block data for each ras block.
5. Create dedicated amdgpu device ras block link list to manage all of the ras blocks.
6. Add amdgpu_ras_register_ras_block new function interface for each ras block to register itself to ras controlling block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to compile them on CONFIG_DRM_AMDGPU_SI disabled.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can cover the power implementation details. And as what did for
powerplay framework, we hook the smu_context to adev->powerplay.pp_handle.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As it lables an internal pm state and amdgpu_pm structure is the more
proper place than amdgpu_device structure for it.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those APIs are used only by legacy ASICs(si/kv). They cannot be
shared by other ASICs. So, we create a new holder for them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
