The presence of the IPL-complete-control facility can be derived
from the hypervisor's SCLP info response.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Raise minimum supported machine generation to z10, which comes with
various cleanups and code simplifications (usercopy/spectre
mitigation/etc).
- Rework extables and get rid of anonymous out-of-line fixups.
- Page table helpers cleanup. Add set_pXd()/set_pte() helper
functions. Covert pte_val()/pXd_val() macros to functions.
- Optimize kretprobe handling by avoiding extra kprobe on
__kretprobe_trampoline.
- Add support for CEX8 crypto cards.
- Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.
- Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
group sections which simplifies kpatch support.
- Always use the packed stack layout and extend kernel unwinder tests.
- Add sanity checks for ftrace code patching.
- Add s390dbf debug log for the vfio_ap device driver.
- Various virtual vs physical address confusion fixes.
- Various small fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmI94dsACgkQjYWKoQLX
FBiaCggAm9xYJ06Qt9c+T9B7aA4Lt50w7Bnxqx1/Q7UHQQgDpkNhKzI1kt/xeKY4
JgZQ9lJC4YRLlyfIVzffLI2DWGbl8BcTpuRWVLhPI5D2yHZBXr2ARe7IGFJueddy
MVqU/r+U3H0r3obQeUc4TSrHtSRX7eQZWIoVuDU75b9fCniee/bmGZqs6yXPXXh4
pTZQ/gsIhF/o6eBJLEXLjUAcIasxCk15GXWXmkaSwKHAhfYiintwGmtKqQ8etCvw
17vdlTjA4ce+3ooD/hXGPa8TqeiGKsIB2Xr89x/48f1eJyp2zPJZ1ZvAUBHJBCNt
b4sF4ql8303Lj7Be+LeqdlbXfa5PZg==
=meZf
-----END PGP SIGNATURE-----
Merge tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Raise minimum supported machine generation to z10, which comes with
various cleanups and code simplifications (usercopy/spectre
mitigation/etc).
- Rework extables and get rid of anonymous out-of-line fixups.
- Page table helpers cleanup. Add set_pXd()/set_pte() helper functions.
Covert pte_val()/pXd_val() macros to functions.
- Optimize kretprobe handling by avoiding extra kprobe on
__kretprobe_trampoline.
- Add support for CEX8 crypto cards.
- Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.
- Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
group sections which simplifies kpatch support.
- Always use the packed stack layout and extend kernel unwinder tests.
- Add sanity checks for ftrace code patching.
- Add s390dbf debug log for the vfio_ap device driver.
- Various virtual vs physical address confusion fixes.
- Various small fixes and improvements all over the code.
* tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits)
s390/test_unwind: add kretprobe tests
s390/kprobes: Avoid additional kprobe in kretprobe handling
s390: convert ".insn" encoding to instruction names
s390: assume stckf is always present
s390/nospec: move to single register thunks
s390: raise minimum supported machine generation to z10
s390/uaccess: Add copy_from/to_user_key functions
s390/nospec: align and size extern thunks
s390/nospec: add an option to use thunk-extern
s390/nospec: generate single register thunks if possible
s390/pci: make zpci_set_irq()/zpci_clear_irq() static
s390: remove unused expoline to BC instructions
s390/irq: use assignment instead of cast
s390/traps: get rid of magic cast for per code
s390/traps: get rid of magic cast for program interruption code
s390/signal: fix typo in comments
s390/asm-offsets: remove unused defines
s390/test_unwind: avoid build warning with W=1
s390: remove .fixup section
s390/bpf: encode register within extable entry
...
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Remove my old invalid email address which can be found in a couple of
files. Instead of updating it, just remove my contact data completely
from source files.
We have git and other tools which allow to figure out who is responsible
for what with recent contact data.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide physical addresses whenever the hardware interface
expects it or a 32-bit value used for tracking.
Variable sclp_early_sccb gets initialized in the decompressor
and points to an address in physcal memory. Yet, it is used
as virtual memory pointer and therefore should be converted.
Note, the other two __bootdata variables sclp_info_sccb and
sclp_info_sccb_valid contain plain data, but no pointers and
do need any special care.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The memory block occupied by the SCLP early buffer that is allocated
by the decompressor and then handed over to the decompressed kernel,
must be reserved to prevent it from being reused for other purposes.
This is necessary because the SCLP early buffer is still in use
during kernel initialization.
Fixes: f1d3c53237 ("s390/boot: move sclp early buffer from fixed address in asm to C")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To make the decompressor relocatable, the early SCLP buffer with a fixed
address must be replaced with a relocatable C buffer of the according size
and alignment as required by SCLP.
Introduce a new function sclp_early_set_buffer() into the SCLP driver
which enables the decompressor to change the SCLP early buffer at any time.
This will be useful when the decompressor becomes fully relocatable and
might need to change the SCLP early buffer to one with an address < 2G
as required by SCLP because it was loaded at an address >= 2G.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A buffer that can be used for communication with SCLP is required
to lie below 2GB memory address. Therefore, both sclp_info_sccb
and sclp_early_sccb must fulfill this requirement if passed directly
to the sclp_early_cmd() function. Instead, use only sclp_early_sccb
for communication with SCLP. This allows the buffer sclp_info_sccb
to be placed anywhere in the memory address space and, therefore,
simplifies the process of making the decompressor relocatable later on,
one thing less to relocate. And make sure that the length of the new unified
early SCLP buffer is no less than the length of the removed sclp_info_sccb
buffer which might be larger than the length of the sclp_early_sccb buffer.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
As the number of cpus increases, the sccb response can exceed 4k for
read cpu and read scp info sclp commands. Hence, all cpu info entries
cant be embedded within a sccb response
Solution:
To overcome this limitation, extended sccb facility is provided by sclp.
1. Check if the extended sccb facility is installed.
2. If extended sccb is installed, perform the read scp and read cpu
command considering a max sccb length of three page size. This max
length is based on factors like max cpus, sccb header.
3. If extended sccb is not installed, perform the read scp and read cpu
sclp command considering a max sccb length of one page size.
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add support for AP bus adapter config and deconfig to the sclp
core code. The code is statically build into the kernel when
ZCRYPT is configured either as module or with static support.
This is the base functionality for having configure/deconfigure
support in the AP bus and card code. Another patch will exploit
this soon.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This reverts commit 55a5542a54 ("s390/hibernate: fix error handling when
suspend cpu != resume cpu"). It added sclp_early_printk_force() which
is no longer used since commit 394216275c ("s390: remove broken
hibernate / power management support"). No hibernate - no problem.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use the correct bit for detection of the machine capability associated
with the has_secure attribute. It is expected that the underlying
platform (including hypervisors) unsets the bit when they don't provide
secure ipl for their guests.
Fixes: c9896acc78 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Detect the adapter CPU directed interruption facility.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Provide an interface for userspace so it can find out if a machine is
capeable of doing secure boot. The interface is, for example, needed for
zipl so it can find out which file format it can/should write to disk.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The s390x diagnose 318 instruction sets the control program name code (CPNC)
and control program version code (CPVC) to provide useful information
regarding the OS during debugging. The CPNC is explicitly set to 4 to
indicate a Linux/KVM environment.
The CPVC is a 7-byte value containing:
- 3-byte Linux version code, currently set to 0
- 3-byte unique value, currently set to 0
- 1-byte trailing null
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1544135405-22385-2-git-send-email-walling@linux.ibm.com>
[set version code to 0 until the structure is fully defined]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce sclp_early_get_hsa_size function to be used during early
memory detection. This function allows to find a memory limit imposed
during zfcpdump.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In a situation when other memory detection methods are not available
(no SCLP and no z/VM diag260), continuous online memory is assumed.
Replacing tprot loop with faster binary search, as only online memory
end has to be found.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
SCLP storage info allows to detect continuous and non-continuous online
memory under LPAR, z/VM and KVM, when standby memory is defined.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Move memory detection to early boot phase. To store online memory
regions "struct mem_detect_info" has been introduced together with
for_each_mem_detect_block iterator. mem_detect_info is later converted
to memblock.
Also introduces sclp_early_get_meminfo function to get maximum physical
memory and maximum increment number.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To enable early online memory detection sclp_early_read_info has
been moved to sclp_early_core.c. sclp_info_sccb has been made a part
of .boot.data, which allows to reuse it later during early kernel
startup and make sclp_early_read_info call just once.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The SCLP event 24 "Adapter Error Notification" supports three different
action qualifier of which 'adapter reset' is currently not enabled in
the sysfs interface. However, userspace tools might want to be able
to use the reset functionality as well. Enable the 'adapter reset'
qualifier.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The resume code checks if the resume cpu is the same as the suspend cpu.
If not, and if it is also not possible to switch to the suspend cpu, an
error message should be printed and the resume process should be stopped
by loading a disabled wait psw.
The current logic is broken in multiple ways, the message is never printed,
and the disabled wait psw never loaded because the kernel panics before that:
- sam31 and SIGP_SET_ARCHITECTURE to ESA mode is wrong, this will break
on the first 64bit instruction in sclp_early_printk().
- The init stack should be used, but the stack pointer is not set up correctly
(missing aghi %r15,-STACK_FRAME_OVERHEAD).
- __sclp_early_printk() checks the sclp_init_state. If it is not
sclp_init_state_uninitialized, it simply returns w/o printing anything.
In the resumed kernel however, sclp_init_state will never be uninitialized.
This patch fixes those issues by removing the sam31/ESA logic, adding a
correct init stack pointer, and also introducing sclp_early_printk_force()
to allow using sclp_early_printk() even when sclp_init_state is not
uninitialized.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The GISA format facility is required by the host to be able to process
a format-1 GISA. If not available, the used GISA format will be format-0.
All format-1 related extension will not be available in this case.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch
- unifies the old sclp early code and the sclp early printk code, so
they can use common functions
- makes sure all sclp early functions and variables have the same
"sclp_early" prefix
- converts the sclp early printk code into readable code by using
existing data structures instead of hard coded magic arrays
- splits the early sclp code into two files: sclp_early.c and
sclp_early_core.c. The core file contains everything that is
required by the kernel decompressor and may not call functions not
contained within the core file. Otherwise the result would be a
link error.
- changes interrupt handling to be completely synchronous. The old
early sclp code had a small window which allowed to receive several
interrupts instead of exactly the single expected interrupt. This
did hide a subtle potential bug, which is fixed with this large
rework.
- contains a couple of small cleanups.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use the early sclp code to provide a boot console. This boot console
is available if the kernel parameter "earlyprintk" has been specified,
just like it works for other architectures that also provide an early
boot console.
This makes debugging of early problems much easier, since now we
finally have working console output even before memory detection is
running.
The boot console will be automatically disabled as soon as another
console will be registered.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In order to be able to setup the cpu to node mappings early it is a
prerequisite to know which cpus are present. Therefore cpus must be
detected much earlier than before.
For sclp based cpu detection this requires yet another early sclp
call, since the system is not ready to use the regular interrupt and
memory allocations.
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let's correctly detect that facility.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's detect that facility.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's detect that facility.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's detect if we have that facility.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's detect if we have the intervention bypass facility installed.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's detect that facility.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's detect the Collaborative-memory-management-interpretation facility,
aka CMM assist, so we can correctly enable cmma later.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's detect that facility, so we can correctly handle its abscence.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's correctly detect that facility, so we can correctly handle its
abscence later on.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
sclp_ocf.c is the only way to get the cpc name, as it registers the
sole event handler for the ocf event. By creating a new global
function that copies that name, we make it accessible to the world
which longs to retrieve it.
Additionally we now also store the cpc name as EBCDIC, so we don't
have to convert it to and from ASCII if it is requested in native
encoding.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
- x86: miscellaneous fixes, AVIC support (local APIC virtualization,
AMD version)
- s390: polling for interrupts after a VCPU goes to halted state is
now enabled for s390; use hardware provided information about facility
bits that do not need any hypervisor activity, and other fixes for
cpu models and facilities; improve perf output; floating interrupt
controller improvements.
- MIPS: miscellaneous fixes
- PPC: bugfixes only
- ARM: 16K page size support, generic firmware probing layer for
timer and GIC
Christoffer Dall (KVM-ARM maintainer) says:
"There are a few changes in this pull request touching things outside
KVM, but they should all carry the necessary acks and it made the
merge process much easier to do it this way."
though actually the irqchip maintainers' acks didn't make it into the
patches. Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
later acked at http://mid.gmane.org/573351D1.4060303@arm.com
"more formally and for documentation purposes".
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXPJjyAAoJEL/70l94x66DhioH/j4fwQ0FmfPSM9PArzaFHQdx
LNE3tU4+bobbsy1BJr4DiAaOUQn3DAgwUvGLWXdeLiOXtoWXBiFHKaxlqEsCA6iQ
xcTH1TgfxsVoqGQ6bT9X/2GCx70heYpcWG3f+zqBy7ZfFmQykLAC/HwOr52VQL8f
hUFi3YmTHcnorp0n5Xg+9r3+RBS4D/kTbtdn6+KCLnPJ0RcgNkI3/NcafTemoofw
Tkv8+YYFNvKV13qlIfVqxMa0GwWI3pP6YaNKhaS5XO8Pu16HuuF1JthJsUBDzwBa
RInp8R9MoXgsBYhLpz3jc9vWG7G9yDl5LehsD9KOUGOaFYJ7sQN+QZOusa6jFgA=
=llO5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Small release overall.
x86:
- miscellaneous fixes
- AVIC support (local APIC virtualization, AMD version)
s390:
- polling for interrupts after a VCPU goes to halted state is now
enabled for s390
- use hardware provided information about facility bits that do not
need any hypervisor activity, and other fixes for cpu models and
facilities
- improve perf output
- floating interrupt controller improvements.
MIPS:
- miscellaneous fixes
PPC:
- bugfixes only
ARM:
- 16K page size support
- generic firmware probing layer for timer and GIC
Christoffer Dall (KVM-ARM maintainer) says:
"There are a few changes in this pull request touching things
outside KVM, but they should all carry the necessary acks and it
made the merge process much easier to do it this way."
though actually the irqchip maintainers' acks didn't make it into the
patches. Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more
formally and for documentation purposes')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits)
KVM: MTRR: remove MSR 0x2f8
KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same
svm: Manage vcpu load/unload when enable AVIC
svm: Do not intercept CR8 when enable AVIC
svm: Do not expose x2APIC when enable AVIC
KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore
svm: Add VMEXIT handlers for AVIC
svm: Add interrupt injection via AVIC
KVM: x86: Detect and Initialize AVIC support
svm: Introduce new AVIC VMCB registers
KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick
KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks
KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks
KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg
KVM: x86: Misc LAPIC changes to expose helper functions
KVM: shrink halt polling even more for invalid wakeups
KVM: s390: set halt polling to 80 microseconds
KVM: halt_polling: provide a way to qualify wakeups during poll
KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts
kvm: Conditionally register IRQ bypass consumer
...
Let's add hypervisor-managed facility-apportionment indications field to
SCLP structs. KVM will use it to reduce maintenance cost of
Non-Hypervisor-Managed facility bits.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add SCLP event 24 "Adapter-error notification".
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull s390 updates from Martin Schwidefsky:
"Among the traditional bug fixes and cleanups are some improvements:
- A tool to generated the facility lists, generating the bit fields
by hand has been a source of bugs in the past
- The spinlock loop is reordered to avoid bursts of hypervisor calls
- Add support for the open-for-business interface to the service
element
- The get_cpu call is added to the vdso
- A set of tracepoints is defined for the common I/O layer
- The deprecated sclp_cpi module is removed
- Update default configuration"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (56 commits)
s390/sclp: fix possible control register corruption
s390: fix normalization bug in exception table sorting
s390/configs: update default configurations
s390/vdso: optimize getcpu system call
s390: drop smp_mb in vdso_init
s390: rename struct _lowcore to struct lowcore
s390/mem_detect: use unsigned longs
s390/ptrace: get rid of long longs in psw_bits
s390/sysinfo: add missing SYSIB 1.2.2 multithreading fields
s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOK
s390/Kconfig: remove pointless 64 bit dependencies
s390/dasd: fix failfast for disconnected devices
s390/con3270: testing return kzalloc retval
s390/hmcdrv: constify hmcdrv_ftp_ops structs
s390/cio: add NULL test
s390/cio: Change I/O instructions from inline to normal functions
s390/cio: Introduce common I/O layer tracepoints
s390/cio: Consolidate inline assemblies and related data definitions
s390/cio: Fix incorrect xsch opcode specification
s390/cio: Remove unused inline assemblies
...
The memory detection code historically had to use unsigned long long
since the machine reported the true memory size (>4GB) even if the
virtual machine was running in ESA/390 mode.
Since the old code is gone use unsigned long everywhere and also get
rid of an unused ADDR2G define.
(this patch converts all long longs within sclp_info to longs)
There are many more possible conversions, however that can be done if
somebody touches the corresponding code. Since people started to
convert unrelated long types to long longs because of the types within
struct sclp_info convert this now.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds a way to check if the SIE with zArchitecture support is
available.
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce sclp.has_hvs and sclp.has_esca to provide a way for kvm to check
whether the extended-SCA and the home-virtual-SCA facilities are available.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When running under qemu with the default configuration (-nographic),
there is only a VT220 SCLP console, no line-mode SCLP console. Add
VT220 support to the early SCLP console so the user has a chance to
see critical error messages during early boot.
None of the existing users of _sclp_print_early() check the return
code. Instead of trying to come up with return code semantics when
printing to multiple consoles (any or all of which may fail), we just
drop the return code entirely.
Tested on z/VM (line mode console) and LPAR (VT220 and line mode
console). Tested on qemu/KVM with VT220 console and / or line mode
console.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce two copy functions for the memory of the dumped system,
copy_oldmem_kernel() to copy to the virtual kernel address space
and copy_oldmem_user() to copy to user space.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The 31-bit assembler code for the early sclp console is error
prone as git commit fde24b54d976cc123506695c17db01438a11b673
"s390/sclp: clear upper register halves in _sclp_print_early"
has shown.
Convert the assembler code to C.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The SCLP interface to query, configure and deconfigure CPUs actually
operates on cores. For a machine without the multi-threading faciltiy
a CPU and a core are equivalent but starting with System z13 a core
can have multiple hardware threads, also referred to as logical CPUs.
To avoid confusion replace the word 'cpu' with 'core' in the SCLP
interface. Also replace MAX_CPU_ADDRESS with SCLP_MAX_CORES.
The core-id is an 8-bit field, the maximum thread id is in the range
0-31. The theoretical limit for the CPU address is therefore 8191.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let's also move the facilities into the sclp struct, so we can avoid
another separate external variable.
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
