To enable compiler type-checked against the format string in callers.
All warnings (new ones prefixed by >>):
>> warning: function 'kfd_smi_event_add' might be a candidate for
'gnu_printf' format attribute [-Wsuggest-attribute=format]
Fixes: d58b8a99cb ("drm/amdkfd: Add SMI add event helper")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ZONE_DEVICE struct pages have an extra reference count that complicates
the code for put_page() and several places in the kernel that need to
check the reference count to see that a page is not being used (gup,
compaction, migration, etc.). Clean up the code so the reference count
doesn't need to be treated specially for ZONE_DEVICE pages.
Note that this excludes the special idle page wakeup for fsdax pages,
which still happens at refcount 1. This is a separate issue and will
be sorted out later. Given that only fsdax pages require the
notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig
symbol can go away and be replaced with a FS_DAX check for this hook
in the put_page fastpath.
Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>.
Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Move the check for the actual pgmap types that need the free at refcount
one behavior into the out of line helper, and thus avoid the need to
pull memremap.h into mm.h.
Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
hmm.h pulls in the world for no good reason at all. Remove the
includes and push a few ones into the users instead.
Link: https://lkml.kernel.org/r/20220210072828.2930359-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
To remove duplicate code, unify event message format and simplify new
event add in the following patches.
Use KFD_SMI_EVENT_MSG_SIZE to define msg size, the same size will be
used in user space to alloc the msg receive buffer.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sizeof(buf) is 8 bytes because it is defined as unsigned char *buf,
each SMI event read only copy max 8 bytes to user buffer. Correct this
by using the buf allocate size.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3abfe30d80.
To fix deadlock in kFDSVMEvictTest when xnack off.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print alloc node, peer node and memory domain when peer map fails. This
is more useful
v2: use dev_err instead of pr_err
use bdf for identify peer gpu
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_chardev() doesn't provide much useful information in dev_... messages
on multi-GPU systems because there is only one KFD device, which doesn't
correspond to any particular GPU. Use the actual GPU device to indicate
the GPU that caused a message.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix for possible integer overflow when doing addition.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver has a fallback so make the message informational
rather than a warning. The driver has a fallback if the
Component Resource Association Table (CRAT) is missing, so
make this informational now.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1906
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang static analysis reports this problem
kfd_chardev.c:2327:2: warning: 1st function call argument
is an uninitialized value
kvfree(bo_privs);
^~~~~~~~~~~~~~~~
Make sure bo_buckets and bo_privs are initialized so freeing them in the
error handling code path will never result in undefined behaviour.
Fixes: 73fa13b6a5 ("drm/amdkfd: CRIU Implement KFD restore ioctl")
Reported-by: Tom Rix <trix@redhat.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When this was first implemented, overflows weren't expected in regular
operations, and tests weren't in place to cause said overflow. Now there
are cases where overflows occur with real workloads, but we know that
the kernel can handle this robustly, so move the message to a debug
message.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_packet_manager_v9.c:267:3:
error: implicit conversion from enumeration type 'enum
mes_map_queues_extended_engine_sel_enum' to different enumeration type
'enum mes_unmap_queues_extended_engine_sel_enum'
[-Werror,-Wenum-conversion]
extended_engine_sel__mes_map_queues__sdma0_to_7_sel :
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Use 'extended_engine_sel__mes_unmap_queues__sdma0_to_7_sel' to eliminate
the warning, which is the same numeric value of the proper type.
Fixes: 009e9a1585 ("drm/amdkfd: navi2x requires extended engines to map and unmap sdma queues")
Link: https://github.com/ClangBuiltLinux/linux/issues/1596
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise gpu reset will be triggered unconditionally in poison
consumption.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" for these cases. The older
style of one-element or zero-length arrays should no longer be used.
Reference:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA 5.2.x queues are required to be mapped and unmapped from the extended
engines.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD only unmaps all queues, all dynamics queues or all process queues
since RUN_LIST is mapped with all KFD queues.
There's no need to provide a single type unmap so remove this option.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A bunch of errors and warnings are leftover KFD over the years, attempt
to fix the errors and most warnings reported by checkpatch tool. Still a
few warnings remain which may be false positives so ignore them for now.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the SPDX License header for all the KFD files.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid spam the kernel log on application memory allocation failures.
__func__ argument was also removed from dev_fmt macro due to
parameter conflicts with dynamic_dev_dbg.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.comi>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the warning: no previous prototype for 'get_process_num_bos'
[-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix checkpatch reported warning for a quoted line and block line
comments.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add basic support for GC 10.1.4,
it uses same IP blocks with GC 10.1.3
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang static analysis reports this problem
kfd_chardev.c:2594:16: warning: The expression is an uninitialized value.
The computed value will also be garbage
while (ret && i--) {
^~~
i is a loop variable and this block unwinds a problem in the loop.
When the error happens before the loop, this value is garbage.
Move the initialization of i to its decalaration.
Fixes: be072b06c7 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang static analysis reports this problem
kfd_chardev.c:2092:2: warning: 1st function call argument
is an uninitialized value
kvfree(bo_privs);
^~~~~~~~~~~~~~~~
When bo_buckets alloc fails, it jumps to an error handler
that frees the yet to be allocated bo_privs. Because
bo_buckets is the first error, return directly.
Fixes: 5ccbb057c0 ("drm/amdkfd: CRIU Implement KFD checkpoint ioctl")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If copy_to_user() fails, it returns the number of bytes remaining to
be copied but we want to return a negative error code (-EFAULT) to the
user.
Fixes: 9d5dabfeff ("drm/amdkfd: CRIU Save Shared Virtual Memory ranges")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kfd_process_device_data_by_id() does not return error pointers,
it returns NULL.
Fixes: bef153b70c ("drm/amdkfd: CRIU implement gpu_id remapping")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few MQD manager functions are duplicated for all versions of
MQD manager. Remove this duplication by moving the common
functions into kfd_mqd_manager.c file.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup the kfd code by removing the unused old debugger
implementation.
The address watch was only ever implemented in the upstream
driver for GFXv7 (Kaveri). The user mode tools runtime using
this API was never open-sourced. Work on the old debugger
prototype that used this API has been discontinued years ago.
Only a small piece of resetting wavefronts is kept and
is moved to kfd_device_queue_manager.c.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With no HWS, TLB flushing will not work in SVM code.
Fix this by calling kfd_flush_tlb() which works for both
HWS and no HWS case.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace reset queue for specific PASID with unmap all queues, reset
queue could break CP scheduler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the function is used in more different cases, use a more general
name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In CRIU resume stage, resume all the shared virtual memory ranges from
the data stored inside the resuming kfd process during CRIU restore
phase. Also setup xnack mode and free up the resources.
KFD_IOCTL_SVM_ATTR_CLR_FLAGS is not available for querying via get_attr
interface but we must clear the flags during restore as there might be
some default flags set when the prange is created. Also handle the
invalid PREFETCH atribute values saved during checkpoint by replacing
them with another dummy KFD_IOCTL_SVM_ATTR_SET_FLAGS attribute.
(rajneesh: Fixed the checkpatch reported problems)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During CRIU restore phase, the VMAs for the virtual address ranges are
not at their final location yet so in this stage, only cache the data
required to successfully resume the svm ranges during an imminent CRIU
resume phase.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During checkpoint stage, save the shared virtual memory ranges and
attributes for the target process. A process may contain a number of svm
ranges and each range might contain a number of attributes. While not
all attributes may be applicable for a given prange but during
checkpoint we store all possible values for the max possible attribute
types.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A KFD process may contain a number of virtual address ranges for shared
virtual memory management and each such range can have many SVM
attributes spanning across various nodes within the process boundary.
This change reports the total number of such SVM ranges and
their total private data size by extending the PROCESS_INFO op of the the
CRIU IOCTL to discover the svm ranges in the target process and a future
patches brings in the required support for checkpoint and restore for
SVM ranges.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the SVM ranges use actual_gpu_id but with Checkpoint Restore
support its possible that the SVM ranges can be resumed on another node
where the actual_gpu_id may not be same as the original (user_gpu_id)
gpu id. So modify svm code to use user_gpu_id.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both svm_range_get_attr and svm_range_set_attr helpers use mm struct
from current but for a Checkpoint or Restore operation, the current->mm
will fetch the mm for the CRIU master process. So modify these helpers to
accept the task mm for a target kfd process to support Checkpoint
Restore.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recoverable page faults are represented by the xnack mode setting inside
a kfd process and are used to represent the device page faults. For CR,
we don't consider negative values which are typically used for querying
the current xnack mode without modifying it.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFD buffer objects do not associate a GEM handle with them so cannot
directly be used with libdrm to initiate a system dma (sDMA) operation
to speedup the checkpoint and restore operation so export them as dmabuf
objects and use with libdrm helper (amdgpu_bo_import) to further process
the sdma command submissions.
With sDMA, we see huge improvement in checkpoint and restore operations
compared to the generic pci based access via host data path.
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When doing a restore on a different node, the gpu_id's on the restore
node may be different. But the user space application will still refer
use the original gpu_id's in the ioctl calls. Adding code to create a
gpu id mapping so that kfd can determine actual gpu_id during the user
ioctl's.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to existing CRIU ioctl's to save and restore events during
criu checkpoint and restore.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checkpoint contents of queue control stacks on CRIU dump and restore them
during CRIU restore.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checkpoint contents of queue MQD's on CRIU dump and restore them during
CRIU restore.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When re-creating queues during CRIU restore, restore the queue with the
same doorbell id value used during CRIU dump.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When re-creating queues during CRIU restore, restore the queue with the
same sdma id value used during CRIU dump.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When re-creating queues during CRIU restore, restore the queue with the
same queue id value used during CRIU dump.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to existing CRIU ioctl's to save number of queues and queue
properties for each queue during checkpoint and re-create queues on
restore.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
