Guchun Chen
d91a275e4e
drm/amd/display: add DMCUB trace irq support for DCN302
...
Otherwise, below errors will be found on DIMGREY_CAVEFISH with DCN302.
Error log observed in driver load:
[drm:amdgpu_dm_irq_register_interrupt [amdgpu]] *ERROR* DM_IRQ: invalid irq_source: 0!
Error observed in mode1_rest sequence:
[ 27.265920] #PF: supervisor read access in kernel mode
[ 27.265941] #PF: error_code(0x0000) - not-present page
[ 27.265956] PGD 0 P4D 0
[ 27.265967] Oops: 0000 [#1 ] SMP NOPTI
[ 27.265979] CPU: 0 PID: 1360 Comm: cat Tainted: G W 5.11.0-99b3786c1770 #20210323
[ 27.266005] Hardware name: System manufacturer System Product Name/PRIME Z390-A, BIOS 1401 11/26/2019
[ 27.266033] RIP: 0010:dal_irq_service_ack+0x25/0x60 [amdgpu]
[ 27.266203] Code: 5d 5d c3 66 90 0f 1f 44 00 00 55 83 fe 61 48 89 e5 77 27 89 f0 48 8d 04 40 48 c1 e0 04 48 03 47 08 74 17 48 8b 50 28 48 89 c6 <48> 8b 52 08 48 85 d2 74 20 e8 1d 64 45 c9 5d c3 89 f2 48 c7 c7 f0
[ 27.266248] RSP: 0018:ffffa115824a3c08 EFLAGS: 00010082
[ 27.266270] RAX: ffffffffc0942c10 RBX: ffffffffc0942c10 RCX: 0000000000000000
[ 27.266288] RDX: 0000000000000000 RSI: ffffffffc0942c10 RDI: ffff88d509cba7a0
[ 27.266312] RBP: ffffa115824a3c08 R08: 0000000000000000 R09: 0000000000000001
[ 27.266335] R10: ffffa115824a3b20 R11: ffffa115824a3b58 R12: ffff88d509cba7a0
[ 27.266353] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000246
[ 27.266377] FS: 00007fb3e2438580(0000) GS:ffff88d50dc00000(0000) knlGS:0000000000000000
[ 27.266402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.266417] CR2: 0000000000000008 CR3: 000000083e5ac006 CR4: 00000000003706f0
[ 27.266441] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.266464] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 27.266483] Call Trace:
[ 27.266491] dal_irq_service_set+0x31/0x80 [amdgpu]
[ 27.266639] dc_interrupt_set+0x24/0x30 [amdgpu]
[ 27.266775] amdgpu_dm_set_dmub_trace_irq_state+0x22/0x30 [amdgpu]
[ 27.266920] amdgpu_irq_update+0x57/0xa0 [amdgpu]
[ 27.267030] amdgpu_irq_gpu_reset_resume_helper+0x64/0xa0 [amdgpu]
[ 27.267135] amdgpu_do_asic_reset+0x211/0x420 [amdgpu]
[ 27.267232] amdgpu_device_gpu_recover+0x517/0xa70 [amdgpu]
[ 27.267325] gpu_recover_get+0x2e/0x60 [amdgpu]
[ 27.267421] simple_attr_read+0x6b/0x130
[ 27.267441] debugfs_attr_read+0x49/0x70
[ 27.267454] full_proxy_read+0x5c/0x90
[ 27.267474] vfs_read+0xa1/0x190
[ 27.267486] ksys_read+0xa7/0xe0
[ 27.267501] __x64_sys_read+0x1a/0x20
[ 27.267521] do_syscall_64+0x37/0x80
[ 27.267541] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 27.267562] RIP: 0033:0x7fb3e2356142
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09 16:49:27 -04:00
Wayne Lin
d1fa156809
drm/amd/display: Support vertical interrupt 0 for all dcn ASIC
...
[Why]
When CONFIG_DRM_AMD_SECURE_DISPLAY is enabled, it will try
to register vertical interrupt 0 for specific task.
Currently, only dcn10 have defined relevant info for vertical interrupt
0. If we enable CONFIG_DRM_AMD_SECURE_DISPLAY for other dcn ASIC, will
get DC_IRQ_SOURCE_INVALID while calling dc_interrupt_to_irq_source() and
cause pointer errors.
[How]
Add support of vertical interrupt 0 for all dcn ASIC.
v2: squash in build fix (Alex)
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23 23:36:31 -04:00
Bhawanpreet Lakha
36d26912e8
drm/amd/display: Add support for DCN302 (v2)
...
- add DCN302 resource, irq service, dmub loader,
- handle DC_VERSION_DCN_3_02
- define DCN302 power gating functions
- handle DCN302 in GPIO files
- define I2C regs
- add CONFIG_DRM_AMD_DC_DCN3_02 guard
v2: rebase fixes (Alex)
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-12 14:02:51 -04:00
