When we use the allmodconfig option we see the following error:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3799 | } // ModeSupportAndSystemConfigurationFull
This commit fixes this issue by moving part of the mode support
operation from ModeSupportAndSystemConfigurationFull to a dedicated
function.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Copy crc_skip_count when duplicating CRTC state
- Add debug option for idle optimizations on cursor updates
- Disable MPC split for DCN32/321
- Add missing ODM 2:1 policy logic
- Update DCN32 and DCN321 SR latencies
- Add reinstate dram in the FPO logic
- Add dc_ctx to link_enc_create() parameters
- Cache cursor when cursor exceeds 64x64
- Add support for manual DMUB FAMS trigger
- Fix dpstreamclk programming
- Add missing AUDIO_DTO_SEL reg field
- Add OTG/ODM functions
- Use correct clock source constructor for DCN314
- Use correct DTO_SRC_SEL for 128b/132b encoding
- Add pixel rate div calcs and programming
- Remove FPU flags from DCN30 Makefile
- Create patch bounding box function for isolate FPU
- Move mclk calculation function to DML
- Remove FPU operations from dcn201 resources
- Fallback to SW cursor if SubVP + cursor too big
- Drop unnecessary FPU flags on dcn302 files
- Reboot while unplug hdcp enabled dp from mst hub
- Reset pipe count when iterating for DET override
- Calculate MALL cache lines based on Mblks required
- Fix two MPO videos in single display ODM combine mode
- Guard against zero memory channels
- Updates SubVP + SubVP DRR cases updates
- Fix OPTC function pointers for DCN314
- Add enable/disable FIFO callbacks to stream setup
- Avoid MPC infinite loop
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
crc_skip_count is used to track how many frames to skip to allow the OTG
CRC engine to "warm up" before it outputs correct CRC values.
Experimentally, this seems to be 2 frames.
When duplicating CRTC states, this value was not copied to the
duplicated state. Therefore, when this state is committed, we will
needlessly wait 2 frames before outputing CRC values. Even if the CRC
engine is already warmed up.
[How]
Copy the crc_skip_count as part of dm_crtc_duplicate_state.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For optimizations and debug purposes we added an option to exit idle
operations on cursor updates.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to CRB, no need to rely on MPC splitting to maximize use of DET
anymore.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Phantom pipes must use the same configuration used in main pipes. This
commit add this check.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update worst case SR latencies according to values measured by hardware
team.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to handle FPO correctly, we need to reinstate the dram values.
This function adds the required code to handle the vblank stretch and
the dram calculation.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When Static screen from MALL, the cursor needs to be
cached if cursor exceeds 64x64 size.
[How]
Program the bit that cache cursor in MALL when size
of the cursor exceeds 64x64.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add is_drr parameter to indicate DRR is enabled on
the panel to determine whether SubVP MCLK switch
logic should be enabled
- Add DRR manual trigger in FW (instead of driver)
because manual trigger programming triggers DRR
update pending and can block SubVP MCLK switches
from taking place
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently programming incorrect hpo inst as well as selecting incorrect source
[HOW]
Use hpo inst instead of otg inst to select dpstreamclk inst
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Needed to program audio dto
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Required for correct OTG_H_TIMING_CNTL programming
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously was pointing to DCN3 clock constructor rather than DCN31's
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP DTO isn't used for 128b/132b encoding
[HOW]
Check current link rate to determine whether using 8b/10b or 128/132b encoding
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY/HOW]
Need to calculate and set some pixel rate divisors on correct otg_inst
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At this stage, we must have all the FPU code for DCN30 isolated in the
DML folder. Drop FPU flags from Makefile.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DCN30 resource, we have a small patch to the bounding box struct;
this patch uses FPU operations. This commit moves that specific part to
its function under the DML folder.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function responsible for calculating the MCLK switching has FPU
operations. This commit moves it to the dcn30_fpu file.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have some FPU operations on the resource part of the DCN201. This
commit drops FPU flags and moves any required FPU code to the DML
folder.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For SubVP cursor cannot be cached in MALL, therefore
we will switch to SW cursor if the cursor size exceeds
what can fit in the local DCN buffers (64x64x4)
- Returning false / failure for set_cursor_attributes will
fallback to SW cursor
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already isolated the DCN302 code in the DML folder, but we forgot to
drop the FPU flags from the Makefile. This commit drops those flags.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coding error in DET allocation was resulting in too few DET segments
being allocated, causing underflow.
[How]
Reset pipe count each time we begin iterating through pipes for a stream.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Calculation for NumWays in MALL should be based on
number of MBlks
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In single display ODM combine mode, two MPO videos ( three
planes ) are not working
[How]
When we detect three planes, don't set odm combine 2to1 policy
for the MPO planes. Otherwise, we run out of pipes available
Add support for two MPO videos in dc_add_plane_to_context().
Don't allow both videos to be on the same side of the
display.
Add extra check when fetching free pipe for two MPO videos.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If BIOS doesn't specify number of memory channels then bandwidth
validation will fail due to insufficient BW in DML.
[How]
If BIOS is setting zero channels then use the default in the table.
If no entry is in the table and no BIOS value is specified then
throw an ASSERT for future developers to look into.
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For any DRR cases in SubVP, don't lock for VSYNC flips
- For DCN32/321 use FW to do DRR manual trigger programming
- Add bit in SubVP cmd to indicate if the SubVP pipe is DRR
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Access violation occurs when swapping between HDMI and FRL monitors
because we're missing the immediate_disable_crtc callback and it's
required for the DCN314 clk manager.
[How]
Update the table to match the DCN31 optc functions for ones that
should be the same:
- immediate_disable_crtc
- configure_crc
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't write out attributes after disabling and re-enabling the link
on some monitors, causing some, but not all, HDMI displays to fail to
lightup on DCN314.
[How]
Firmware used to do this after DIG link setup.
Since firmware is no longer doing this to support USB4 and dynamic link
remapping we'll need to add this to driver in the equivalent paths.
New optional callbacks were created in the stream encoder interface and
implementations were added for DCN314.
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In some cases MPC tree bottom pipe ends up point to itself. This causes
iterating from top to bottom to hang the system in an infinite loop.
[how]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move additional dummy structures off the stack and into
the dummy vars structure.
Fixes the following:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1659:1: error: the frame size of 2144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
1659 | }
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3799 | } // ModeSupportAndSystemConfigurationFull
| ^
v2: move more stuff to dummy structure, fix init order (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Use same modifiers as for AMDGPU_FAMILY_GC_11_0_0
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While parsing dc_version redundant check leads to
invalid dc_version for dcn314.
[How]
Remove redundant check
Fixes: ee7b62e127 ("drm/amd/display: Enable DCN314 in DC")
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The -mno-gnu-attribute option in dcn301 clk mgr makefile hides a soft vs
hard fp error for powerpc. After removing this flag, we can see some FPU
code remains there:
gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.o
uses soft float
Therefore, remove the -mno-gnu-attribute flag for dcn301/powerpc and
move FPU-associated code to DML folder.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The -mno-gnu-attribute option in clk mgr makefile for dcn30 hides a soft
vs hard fp error for powerpc. After removing this flag, we can see some
FPU code remains there:
gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.o
uses soft float
Therefore, remove the -mno-gnu-attribute flag for dcn30/powerpc and move
FPU-associated code to DML folder.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The -mno-gnu-attribute option in dcn21 clk mgr makefile hides a soft vs
hard fp error for powerpc. After removing this flag, we can see some FPU
code remains there:
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.o uses
soft float
Therefore, remove the -mno-gnu-attribute flag for dcn21/powerpc and move
FPU-associated code to DML folder.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Many lines of code in dcn31_resource_construct are wrapped by DC_FP
macro to protect FPU operations; however, there is no FPU in this
region. Therefore, just remove the wrapper for clarity.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move remaining FPU code to DML folder that caused compilation error for
powerpc. This patch depends on [1] to prevent the error below:
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o
[1] https://lore.kernel.org/amd-gfx/20220716195144.342960-1-mwen@igalia.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Isolate FPU operation for DCN32/321 under the DML folder
- Create a specific file for CRTC and plane based on amdgpu_dm
- Fix DSC issues
- Update DML logic
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit fully move the missing FPU operations from dcn321 resource
to dcn321 fpu. It also remove those FPU flags from the Makefile.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
