Now that we have the CRTC using the atomic modeset transitional helper,
there is no need to build a temporary crtc state anymore - we can use
the CRTC atomic state directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The overlay plane support updates asynchronously to the request, but the
drm_plane_helper_update() transitional helper waits for a vblank event
before releasing the framebuffer. Using the transitional helper would
make the call block, which would introduce a performance regression.
Convert the overlay plane update to use the atomic state structures and
methods for the plane, but implement our own legacy update method
rather than the transitional helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
page_flip requests happen asynchronously, so we can't wait on the
vblank event before returning to userspace, as the transitional plane
update helper would do. Craft our own implementation that keeps the
asynchronous behaviour of this request, while making use of the atomic
infrastructure for the primary plane update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the primary plane as a whole to use its atomic state and the
transitional helpers. The CRTC is also switched to use the transitional
helpers for mode_set() and mode_set_base().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reset the atomic state of any converted components during driver
initialisation to ensure that we have the atomic state initialised for
any component converted to atomic modeset.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_gra_plane_regs() is now only ever called from within
armada_drm_primary_update_state(), so merge it into this function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use the core of the update_plane method to configure the primary plane
within mode_set() rather than duplicating this code. This moves us
closer to the same code structure that the atomic modeset transitional
helpers will use.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the mode set vblank handling and controller enable/disable to the
prepare() and commit() callbacks. This will be needed when we move to
mode_set_nofb() as we should not enable the controller without the
plane coordinates and location having been properly updated.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
drm_mode_page_flip_ioctl() already takes care of checking the
framebuffer format, and also assigns primary->fb after a successful
call to this handler. These are both redundant, and can be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct. For now, this is just documenting that the
function returns a VM_FAULT value rather than an errno. Once all
instances are converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Previously vm_insert_pfn() returns err which driver mapped into
VM_FAULT_* type. The new function vmf_insert_pfn() will replace this
inefficiency by returning VM_FAULT_* type.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add the missing locks to the IRQ enable/disable paths, and fix a comment
in the interrupt handler: reading the ISR clears down the status bits,
but does not reset the interrupt so it can signal again. That seems to
require a write.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The colorkey mode property was not correctly disabling the colorkeying
when "disabled" mode was selected. Arrange for this to work as one
would expect.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/
Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass. As this makes the framebuffer
create_handle and destroy functions the same as the GEM framebuffer
helper, we can reuse those.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-19-daniels@collabora.com
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Since armada isn't atomic we'll use crtc->enabled and crtc->mode instead
of the stuff under crtc_state.
Once everyone agrees on how the clip rectangle gets set up we can
move the code into drm_atomic_helper_check_plane_state().
Cc: Dave Airlie <airlied@redhat.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
As armada isn't an atomic driver trying to pass a non-populated
crtc->state to drm_atomic_helper_check_plane_state() will end in tears.
Construct a temporary crtc state a la drm_plane_helper_check_update()
and pass that instead. For now we just really need crtc_state->enable
to be there.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
This series builds upon the set of fixes previously submitted to move
Armada DRM closer to atomic modeset. We're nowhere near yet, but this
series helps to get us closer by unifying some of the differences
between the primary and overlay planes.
New features added allows userspace to disable the primary plane if
overlay is full screen and there's nothing obscuring the colorkey -
this saves having to fetch an entire buffer containing nothing but
colorkey when displaying full screen video.
[airlied: fixup for atomic plane helper rename:
a01cb8ba3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Nov 1 22:16:19 2017 +0200
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
]
* 'drm-armada-devel-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm: (29 commits)
drm/armada: expand overlay trace entry
drm/armada: implement primary plane update
drm/armada: extract register generation from armada_drm_primary_set()
drm/armada: wait for previous work when moving overlay window
drm/armada: move overlay plane register update generation
drm/armada: re-organise overlay register update generation
drm/armada: disable planes at next blanking period
drm/armada: avoid work allocation
drm/armada: allow armada_drm_plane_work_queue() to silently fail
drm/armada: use drm_plane_helper_check_state()
drm/armada: only enable HSMOOTH if scaling horizontally
drm/armada: move writes of LCD_SPU_SRAM_PARA1 under lock
drm/armada: move regs into armada_plane_work
drm/armada: move event sending into armada_plane_work
drm/armada: move fb retirement into armada_plane_work
drm/armada: move overlay plane work out from under spinlock
drm/armada: clear plane enable bit when disabling
drm/armada: clean up armada_drm_crtc_plane_disable()
drm/armada: allow the primary plane to be disabled
drm/armada: wait and cancel any pending frame work at disable
...
Implement primary plane update without having to go through a modeset
to achieve that; the hardware does not require such complexity. This
means we treat the primary plane as any other, allowing the format,
size, position and scaling to be updated via the normal plane ioctls.
This also allows us to seemlessly disable and re-enable the primary
plane when (eg) displaying full-frame video without any graphic
clipping the overlaid video - which saves wasting memory bandwidth
needlessly verifying that the colorkey is indeed filling the entire
primary plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We must wait for the previous plane work to complete before moving
the overlay window, as it could overwrite our positioning update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane register update generation to a separate function
as this is independent of the legacy or atomic update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Re-organise overlay register generation so that we do not have to wait
for the previous update to complete while creating the new state. This
allows the update to be fully prepared before queueing it for the next
interrupt.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Disable planes at the next blanking period rather than immediately.
In order to achieve this, we need to delay the clearing of dcrtc->plane
until after the next blanking period, so move that into a separate
work function. To avoid races, we also need to move its assignment in
the overlay code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Avoid printing an error message when armada_drm_plane_work_queue() is
unable to get the vblank (eg, because we're doing a modeset.) Continue
to report the failure to the caller, so the caller can handle this.
Move the error message into armada_ovl_plane_update().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use drm_plane_helper_check_state() to check the overlay plane state
rather than drm_plane_helper_check_update(), as:
(1) using drm_plane_helper_check_state() provides a better migration
path to atomic modeset
(2) it avoids needless copies of drm rectangle structures, and so is
more efficient.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Only enable the HSMOOTH control bit if we are scaling horizontally,
otherwise it makes no sense to enable the horizontal scaler.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move writes of LCD_SPU_SRAM_PARA1 under the irq lock, so that we can
add this to the frame updates at interrupt time when disabling a
plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the register update structure out of the overlay private structure
into armada_plane_work, as this is common to both the primary and
overlay planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the sending of events into the armada_plane_work structure, and
combine the processing in armada_drm_plane_work_call().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Both the primary and overlay planes retire framebuffers in a similar
manner; this can be consolidated by moving the retirement up to the
armada_plane_work layer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane work out from under the spinlock so that both the
primary and overlay planes run their work in the same context. This is
necessary so that we can use frame works with the overlay plane.
However, we must update the CRTC registers under the spinlock, so fix up
the overlay code for that.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Clear the plane enable bit in the software state within
armada_drm_plane_disable() when disabling either the primary or
overlay planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Merge armada_drm_primary_disable() into armada_drm_crtc_plane_disable()
and rename to armada_drm_plane_disable(). Use this to simplify
armada_ovl_plane_disable().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Wait for a second, and if we time out, cancel any pending work when
disabling the primary plane. This ensures that any pending work is
completed or cleaned up prior to the disable taking effect.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add a work cancel callback, so that work items can add functionality to
clean themselves up when they are cancelled.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Store the plane in the armada_plane_work structure rather than passing
it around; it doesn't get used very much in the work structures, so
passing it around is a needless expense.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_plane_work_cancel()'s returned work structure is never used
or referenced, so it's pointless returning it. It's also pointless
because the caller doesn't have a clue what kind of work structure it
is.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We weren't correctly calculating the YUV planar offsets for subsampled
chroma planes correctly - fix up the coordinates for planes 1 and 2.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Lookup the drm_format_info structure once when computing all the
framebuffer plane addresses by using drm_format_info(), rather than
repetitive lookups via drm_format_plane_cpp().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The UV swap code was not always programming things correctly when
the source origin box has been offset. Fix this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Avoid powering down the overlay SRAM banks when disabling the primary
plane, thereby masking any overlay video. This feature is supposed to
allow us to cut the bandwidth required while displaying full-frame
overlay video.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
