We've been introducing new registers with a mix of "XEHP_"
(architecture) and "XEHPSDV_" (platform) prefixes. For consistency,
let's settle on "XEHP_" as the preferred form.
XEHPSDV_RP_STATE_CAP stays with its current name since that's truly a
platform-specific register and not something that applies to the Xe_HP
architecture as a whole.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz@caztech.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-2-matthew.d.roper@intel.com
Retrieve RP0 and RPn freq for media IP from PCODE and display in per-gt
sysfs. This patch adds the following files to gt/gtN sysfs:
* media_RP0_freq_mhz
* media_RPn_freq_mhz
v2: Fixed commit author (Rodrigo)
v3: Convert to new uncore interface for pcode functions
v4: Adapt to intel_pcode.* function rename
v5: #include "intel_pcode.h" in alphabetical order (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45e34127a79e808f6582db8afb77f2f728a446e6.1653484574.git.ashutosh.dixit@intel.com
Expose new sysfs to program and retrieve media freq factor. Factor values
of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point
representation (corresponding to integer values of 0, 128 and 256
respectively).
Media freq factor is converted to media_ratio_mode for GuC. It is
programmed into GuC using H2G SLPC interface. It is retrieved from GuC
through a register read. A cached media_ratio_mode is maintained to
preserve set values across GuC resets.
This patch adds the following sysfs files to gt/gtN sysfs:
* media_freq_factor
* media_freq_factor.scale
v2: Minor wording change in drm_warn (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7ad7578335d8af9cba047b4bcf33d1887453d2e1.1653484574.git.ashutosh.dixit@intel.com
The INTEL_GT_RPS_SYSFS_ATTR was creating to different structures
but. When called with the "static" keyword this is affecting only
the first structure, while the second is created as non static.
Move the static keyword inside the macros to affect both the
structures.
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 56a709cf77 ("drm/i915/gt: Create per-tile RPS sysfs interfaces")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510140447.80200-1-andi.shyti@linux.intel.com
Throttling here refers to the GT frequency being clipped. Each of
the throttle reason attributes will have a 0 or 1 value depending
upon whether there is throttling and also the specific reason for
it.
The following is a brief description of the sysfs throttle
frequency attributes added:
- throttle_reason_status: when set indicates that there is GT
frequency clipping.
- throttle_reason_pl1: when set indicates that PBM PL1 (platform
or package PL1) has caused GT frequency clipping.
- throttle_reason_pl2: when set indicates that PBM PL2 or PL3
(platform or package PL2 or PL3) has caused GT frequency
clipping.
- throttle_reason_pl4: when set indicates that PL4 or IccMax has
caused GT frequency clipping.
- throttle_reason_thermal: when set indicates that Thermal event
has caused GT frequency clipping.
- throttle_reason_prochot: when set indicates that PROCHOT# has
caused GT frequency clipping.
- throttle_reason_ratl: when set indicates that Running Average
Thermal Limit has caused GT frequency clipping.
- throttle_reason_vr_thermalert: when set indicates that Hot VR
(any processor VR) has caused GT frequency clipping.
- throttle_reason_vr_tdc: when set indicates that VR TDC
(Thermal Design Current) has caused GT frequency clipping.
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Dale B Stimson <dale.b.stimson@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-8-andi.shyti@linux.intel.com
Now tiles have their own sysfs interfaces under the gt/
directory. Because RPS is a property that can be configured on a
tile basis, then each tile should have its own interface
The new sysfs structure will have a similar layout for the 4 tile
case:
/sys/.../card0
├── gt
│ ├── gt0
│ │ ├── id
│ │ ├── rc6_enable
│ │ ├── rc6_residency_ms
│ │ ├── rps_act_freq_mhz
│ │ ├── rps_boost_freq_mhz
│ │ ├── rps_cur_freq_mhz
│ │ ├── rps_max_freq_mhz
│ │ ├── rps_min_freq_mhz
│ │ ├── rps_RP0_freq_mhz
│ │ ├── rps_RP1_freq_mhz
│ │ └── rps_RPn_freq_mhz
. .
. .
. .
│ └── gtN
│ ├── id
│ ├── rc6_enable
│ ├── rc6_residency_ms
│ ├── rps_act_freq_mhz
│ ├── rps_boost_freq_mhz
│ ├── rps_cur_freq_mhz
│ ├── rps_max_freq_mhz
│ ├── rps_min_freq_mhz
│ ├── rps_RP0_freq_mhz
│ ├── rps_RP1_freq_mhz
│ └── rps_RPn_freq_mhz
├── gt_act_freq_mhz -+
├── gt_boost_freq_mhz |
├── gt_cur_freq_mhz | Original interface
├── gt_max_freq_mhz +─-> kept as existing ABI;
├── gt_min_freq_mhz | it points to gt0/
├── gt_RP0_freq_mhz |
├── gt_RP1_freq_mhz |
└── gt_RPn_freq_mhz -+
The existing interfaces have been kept in their original location
to preserve the existing ABI. They act on all the GTs: when
writing they loop through all the GTs and write the information
on each interface. When reading they provide the average value
from all the GTs.
This patch is not really adding exposing new interfaces (new
ABI) other than adapting the existing one to more tiles. In any
case this new set of interfaces will be a basic tool for system
managers and administrators when using i915.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-7-andi.shyti@linux.intel.com
Now tiles have their own sysfs interfaces under the gt/
directory. Because RC6 is a property that can be configured on a
tile basis, then each tile should have its own interface
The new sysfs structure will have a similar layout for the 4 tile
case:
/sys/.../card0
├── gt
│ ├── gt0
│ │ ├── id
│ │ ├── rc6_enable
│ │ ├── rc6_residency_ms
. . .
. . .
. .
│ └── gtN
│ ├── id
│ ├── rc6_enable
│ ├── rc6_residency_ms
│ .
│ .
│
└── power/ -+
├── rc6_enable | Original interface
├── rc6_residency_ms +-> kept as existing ABI;
. | it multiplexes over
. | the GTs
-+
The existing interfaces have been kept in their original location
to preserve the existing ABI. They act on all the GTs: when
reading they provide the average value from all the GTs.
This patch is not really adding exposing new interfaces (new
ABI) other than adapting the existing one to more tiles. In any
case this new set of interfaces will be a basic tool for system
managers and administrators when using i915.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-6-andi.shyti@linux.intel.com
