Disable HuC loading since it is not used on these platforms.
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-6-matthew.d.roper@intel.com
There are 2 ways an engine can get reset in i915 and the method of reset
affects how KMD labels a context as guilty/innocent.
(1) GuC initiated engine-reset: GuC resets a hung engine and notifies
KMD. The context that hung on the engine is marked guilty and all other
contexts are innocent. The innocent contexts are resubmitted.
(2) GT based reset: When an engine heartbeat fails to tick, KMD
initiates a gt/chip reset. All active contexts are marked as guilty and
discarded.
In order to correctly mark the contexts as guilty/innocent, pass a mask
of engines that were reset to __guc_reset_context.
Fixes: eb5e7da736 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com
The previous patch introduced new failure cases in the HuC init flow
that can be hit by simply changing the config, so we want to avoid
failing the probe in those scenarios. HuC load failure is already
considered a non-fatal error and we have a way to report to userspace
if the HuC is not available via a dedicated getparam, so no changes
in expectation there.
The error message in the HuC init code has also been lowered to info to
avoid throwing error message for an expected behavior.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-5-daniele.ceraolospurio@intel.com
HuC loading via GSC is performed via a PXP command sent through the mei
modules, so we need both MEI_GSC and MEI_PXP to be available. Given that
the GSC will do both the transfer and the authentication, the legacy HuC
loading paths can be safely skipped.
Also note that the GSC-loaded HuC survives GT reset.
v2: move the huc_is_authenticated() function to this patch.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-4-daniele.ceraolospurio@intel.com
Remove the local enableddisabled() implementation and adopt the
str_enabled_disabled() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-3-lucas.demarchi@intel.com
Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com
Maarten needs backmerge to account for header file renames/changes which
landed via drm-intel-next and are interfering with his pinning work.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
If the GuC fails to load, it is useful to know what firmware file /
version was attempted. So move the version info report to before the
load attempt rather than only after a successful load.
If the GuC does fail to load, then make the error messages visible
rather than being 'debug' prints that do not appears in dmesg output
by default.
When waiting for the GuC to load, it used to be necessary to check for
two different states - READY and (LAPIC_DONE | MIA_CORE). Apparently
the second signified init complete on RC6 exit. However, in more
recent GuC versions the RC6 exit sequence now finishes with status
READY as well. So the test can be simplified.
Also, add an enum giving all the current status codes that GuC loading
can report as a reference without having to pull and search through
the GuC source files.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-4-John.C.Harrison@Intel.com
Driver Changes:
- Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld)
- Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa)
- Fixed debugfs access crash if GuC failed to load (John Harrison)
- Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström)
- Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström)
- Exclude reserved stolen from driver use (Chris Wilson)
- Add memory region sanity checking and optional full test (Chris Wilson)
- Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett)
- Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost)
- Don't hog IRQs when destroying GuC contexts (John Harrison)
- Make GuC to Host communication more robust (Matthew Brost)
- Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst)
- Improve performance of reading GuC log from debugfs (John Harrison)
- Log when GuC fails to reset an engine (John Harrison)
- Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar)
- Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König)
- Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison)
- Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko)
- Add noreclaim annotations (Matthew Auld)
- Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost)
- Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti)
- Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison)
- Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa)
- Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior)
- Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi)
- Selftest for stealing of guc ids (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
By default, GT (and GuC) run at RPn. Requesting for RP0
before firmware load can speed up DMA and HuC auth as well.
In addition to writing to 0xA008, we also need to enable
swreq in 0xA024 so that Punit will pay heed to our request.
SLPC will restore the frequency back to RPn after initialization,
but we need to manually do that for the non-SLPC path.
We don't need a manual override in the SLPC disabled case, just
use the intel_rps_set function to ensure consistent RPS state.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216233022.21351-1-vinay.belgaumkar@intel.com
Though, RPL-S is defined as subplatform of ADL-S, unlike
ADL-S, it has GuC submission by default.
v2: Remove extra parenthesis (Jani)
v3: s/IS_RAPTORLAKE/IS_ADLS_RPLS (Jani)
Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203063545.2254380-4-anusha.srivatsa@intel.com
The function is only used from within GEM_BUG_ON(), which is causing
warnings with Wunneeded-internal-declaration in some builds. Since the
function is a simple wrapper around a CT function, we can just call the
CT function directly instead.
Fixes: 1fb12c5871 ("drm/i915/guc: skip disabling CTBs before sanitizing the GuC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210823163137.19770-1-daniele.ceraolospurio@intel.com
This interrupt is enabled during RPS initialization, and
now needs to be done by SLPC code. It allows ARAT timer
expiry interrupts to get forwarded to GuC.
v2: Fix comment (Matthew Brost)
v3: checkpatch()
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-11-vinay.belgaumkar@intel.com
Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.
v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)
v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)
v4: Optimize the stringify function and other comments (Michal W)
v5: Enable slpc as well before declaring GuC submission status (Michal W)
v6: Checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-6-vinay.belgaumkar@intel.com
Add macros to check for SLPC support. This feature is currently supported
for Gen12+ and enabled whenever GuC submission is enabled/selected.
Include templates for SLPC init/fini and enable.
v2: Move SLPC helper functions to intel_guc_slpc.c/.h. Define
basic template for SLPC structure in intel_guc_slpc_types.h.
Fix copyright (Michal W)
v3: Review comments (Michal W)
v4: Include supported/selected inside slpc struct (Michal W)
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-2-vinay.belgaumkar@intel.com
Unblock GuC submission on Gen11+ platforms.
v2:
(Martin Peres / John H)
- Delete debug message when GuC is disabled by default on certain
platforms
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-34-matthew.brost@intel.com
The media watchdog mechanism involves GuC doing a silent reset and
continue of the hung context. This requires the i915 driver provide a
golden context to GuC in the ADS.
v2:
(Matthew Brost):
- Fix memory corruption in shmem_read
(John H)
- Use locals rather than defines for LR_* + SKIP_SIZE
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-24-matthew.brost@intel.com
It is impossible to seal all race conditions of resets occurring
concurrent to other operations. At least, not without introducing
excesive mutex locking. Instead, don't complain if it occurs. In
particular, don't complain if trying to send a H2G during a reset.
Whatever the H2G was about should get redone once the reset is over.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-17-matthew.brost@intel.com
The new GuC interface introduces an MMIO H2G command,
INTEL_GUC_ACTION_RESET_CLIENT, which is used to implement suspend. This
MMIO tears down any active contexts generating a context reset G2H CTB
for each. Once that step completes the GuC tears down the CTB
channels. It is safe to suspend once this MMIO H2G command completes
and all G2H CTBs have been processed. In practice the i915 will likely
never receive a G2H as suspend should only be called after the GPU is
idle.
Resume is implemented in the same manner as before - simply reload the
GuC firmware and reinitialize everything (e.g. CTB channels, contexts,
etc..).
v2:
(Michel / John H)
- INTEL_GUC_ACTION_RESET_CLIENT 0x5B01 -> 0x5507
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-12-matthew.brost@intel.com
Add disable GuC interrupts to intel_guc_sanitize(). Part of this
requires moving the guc_*_interrupt wrapper function into header file
intel_guc.h.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-11-matthew.brost@intel.com
Reset implementation for new GuC interface. This is the legacy reset
implementation which is called when the i915 owns the engine hang check.
Future patches will offload the engine hang check to GuC but we will
continue to maintain this legacy path as a fallback and this code path
is also required if the GuC dies.
With the new GuC interface it is not possible to reset individual
engines - it is only possible to reset the GPU entirely. This patch
forces an entire chip reset if any engine hangs.
v2:
(Michal)
- Check for -EPIPE rather than -EIO (CT deadlock/corrupt check)
v3:
(John H)
- Split into a series of smaller patches
v4:
(John H)
- Fix typo
- Add braces around if statements in reset code
v5:
(Checkpatch)
- Fix warnings
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
This action is no-op in the GuC side for a few versions already
and it is getting entirely removed soon, in an upcoming version.
Time to remove before we face communication issues.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-5-matthew.brost@intel.com
If we're about to sanitize the GuC, something might have going wrong
beforehand, so we should avoid trying to talk to it. Even if GuC is
still running fine, the sanitize will reset its internal state and clear
the CTB registration, so there is still no need to explicitly do so.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2469
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-2-matthew.brost@intel.com
There is a module parameter for controlling what GuC/HuC features are
enabled. Setting to -1 means 'use the default'. However, the default
was not well defined, out of date and needs to be different across
platforms.
The default is now to disable both GuC and HuC on legacy platforms
where legacy means TGL/RKL and anything prior to Gen12. For new
platforms, the default is to load HuC but not enable GuC submission
as that has not landed yet.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113220724.2484897-1-John.C.Harrison@Intel.com
CT event handler is called under the gt->irq_lock from the interrupt
handling paths so make it the same from the init path. I don't think this
mismatch caused any functional issue but we need to wean the code of the
global i915->irq_lock.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120095636.1987395-2-tvrtko.ursulin@linux.intel.com
Guc->mmio_msg is set under the guc->irq_lock in guc_get_mmio_msg so it
should be consumed under the same lock from guc_handle_mmio_msg.
I am not sure if the overall flow here makes complete sense but at least
the correct lock is now used.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120095636.1987395-1-tvrtko.ursulin@linux.intel.com
The GuC communication enabled/disabled messages are too noisy in info
level. Convert them from info to debug level, and switch to device based
logging while at it.
Reported-by: Karol Herbst <kherbst@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917165056.29766-1-jani.nikula@intel.com
Firmware "Selected" state is a transient state - we don't expect to see
it after finishing driver probe, we even have asserts sprinkled over
i915 to confirm whether that's the case.
Unfortunately - we don't handle the transition out of "Selected" in case
of GuC fetch error, leading those asserts to fire when calling
"intel_huc_is_used()".
v2: Add dbg print when moving HuC into error state (Daniele)
Reported-by: Marcin Bernatowicz <marcin.bernatowicz@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Marcin Bernatowicz <marcin.bernatowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708100843.297655-2-michal@hardline.pl
Start using device specific parameters instead of module parameters for
most things. The module parameters become the immutable initial values
for i915 parameters. The device specific parameters in i915->params
start life as a copy of i915_modparams. Any later changes are only
reflected in the debugfs.
The stragglers are:
* i915.force_probe and i915.modeset. Needed before dev_priv is
available. This is fine because the parameters are read-only and never
modified.
* i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and
I915_STATE_WARN_ON would result in massive and ugly churn. This is
handled by not exposing the parameter via debugfs, and leaving the
parameter writable in sysfs. This may be fixed up in follow-up work.
* i915.inject_probe_failure. Only makes sense in terms of the module,
not the device. This is handled by not exposing the parameter via
debugfs.
v2: Fix uc i915 lookup code (Michał Winiarski)
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com
We need to keep the GuC error logs around to debug the load failure,
so we can't clean them in the error unwind, which includes uc_fini().
Moving the cleanup to driver remove ensures that the logs stick around
long enough for us to dump them.
v2: reword commit msg (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-7-daniele.ceraolospurio@intel.com
We are quite trigger happy in cleaning up the firmware blobs, as we do
so from several error/fini paths in GuC/HuC/uC code. We do have the
__uc_cleanup_firmwares cleanup function, which unwinds
__uc_fetch_firmwares and is already called both from the error path of
gem_init and from gem_driver_release, so let's stop cleaning up from
all the other paths.
The fact that we're not cleaning the firmware immediately means that
we can't consider firmware availability as an indication of
initialization success. A "LOADABLE" status has been added to
indicate that the initialization was successful, to be used to
selectively load HuC only if HuC init has completed (HuC init failure
is not considered a fatal error).
v2: s/ready_to_load/loadable (Michal), only run guc/huc_fini if the
fw is in loadable state
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-9-daniele.ceraolospurio@intel.com
Now that we can differentiate wants vs uses GuC/HuC, intel_uc_init is
restricted to running only if we have successfully fetched the required
blob(s) and are committed to using the microcontroller(s).
The only remaining thing that can go wrong in uc_init is the allocation
of GuC/HuC related objects; if we get such a failure better to bail out
immediately instead of wedging later, like we do for e.g.
intel_engines_init, since without objects we can't use the HW, including
not being able to attempt the firmware load.
While at it, remove the unneeded fw_cleanup call (this is handled
outside of gt_init) and add a probe failure injection point for testing.
Also, update the logs for <g/h>uc_init failures to probe_failure() since
they will cause the driver load to fail.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-8-daniele.ceraolospurio@intel.com
To be able to differentiate the before and after of our commitment to
GuC submission, which will be used in follow-up patches to early set-up
the submission structures.
v2: move functions to guc_submission.h (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-7-daniele.ceraolospurio@intel.com
To be able to setup GuC submission functions during engine init we need
to commit to using GuC as soon as possible.
Currently, the only thing that can stop us from using the
microcontrollers once we've fetched the blobs is a fundamental
error (e.g. OOM); given that if we hit such an error we can't really
fall-back to anything, we can "officialize" the FW fetching completion
as the moment at which we're committing to using GuC.
To better differentiate this case, the uses_guc check, which indicates
that GuC is supported and was selected in modparam, is renamed to
wants_guc and a new uses_guc is introduced to represent the case were
we're committed to using the GuC. Note that uses_guc does still not imply
that the blob is actually loaded on the HW (is_running is the check for
that). Also, since we need to have attempted the fetch for the result
of uses_guc to be meaningful, we need to make sure we've moved away
from INTEL_UC_FIRMWARE_SELECTED.
All the GuC changes have been mirrored on the HuC for coherency.
v2: split fetch return changes and new macros to their own patches,
support HuC only if GuC is wanted, improve "used" state
description (Michal)
v3: s/wants_huc/uses_huc in uc_init_wopcm
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-6-daniele.ceraolospurio@intel.com
We already have guc_is_running function, but it only reflects
firmware status, while to fully use GuC we need to know if we've
already established communication with it.
v2: also s/intel_guc_is_running/intel_guc_is_fw_running (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131153706.109528-1-michal.wajdeczko@intel.com
uC sanitization is only meaningful if we are running with uC present
or enabled. Make this function part of the uc_ops.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110222723.14724-5-michal.wajdeczko@intel.com
uC preparation and cleanup steps are only meaningful if we are
running with uC enabled. Make these functions part of the uc_ops.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110222723.14724-4-michal.wajdeczko@intel.com
Firmware fetching and cleanup steps are only meaningful if we are
running with uC enabled. Make these functions part of the uc_ops.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110222723.14724-3-michal.wajdeczko@intel.com
Instead of spreading multiple conditionals across the uC code
to find out current mode of uC operation, start using predefined
set of function pointers that reflect that mode.
Begin with pair of init_hw/fini_hw functions that are responsible
for uC hardware initialization and cleanup.
v2: drop ops_none, use macro to generate ops helpers
v3: reuse __uc_check_hw to avoid redundant comment
v4: forward declare ops struct vs functions
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110222723.14724-2-michal.wajdeczko@intel.com
Begin pulling the GT setup underneath a single GT umbrella; let intel_gt
take ownership of its engines! As hinted, the complication is the
lifetime of the probed engine versus the active lifetime of the GT
backends. We need to detect the engine layout early and keep it until
the end so that we can sanitize state on takeover and release.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222120752.1368352-1-chris@chris-wilson.co.uk
Since we started using CT buffers on all gens, the function pointers can
only be set to either the _nop() or the _ct() functions. Since the
_nop() case applies to when the CT are disabled, we can just handle that
case in the _ct() functions and call them directly.
v2: keep intel_guc_send() and make the CT send/receive functions work on
intel_guc_ct. (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-5-daniele.ceraolospurio@intel.com
The only difference from the GuC POV between guc_communication_stop and
guc_communication_disable is that the former can be called after GuC
has been reset. Instead of having two separate paths, we can just skip
the call into GuC in the disabling path and re-use that.
Note that by using the disable() path instead of the stop() one there
are two additional changes in SW side for the stop path:
- interrupts are now disabled before disabling the CT, which is ok
because we do not want interrupts with CT disabled;
- guc_get_mmio_msg() is called in the stop case as well, which is ok
because if there are errors before the reset we do want to record
them.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-1-daniele.ceraolospurio@intel.com
There is no need to pass explicit i915 since we already have
a debug trick to get parent gt from uc_fw, we only need to
make this trick available on non-debug builds.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211124549.59516-2-michal.wajdeczko@intel.com
Instead of relying on the workqueue, the upcoming reworked GuC
submission flow will offer the host driver indipendent control over
the execution status of each context submitted to GuC. As part of this,
the doorbell usage model has been reworked, with each doorbell being
paired to a single lrc and a doorbell ring representing new work
available for that specific context. This mechanism, however, limits
the number of contexts that can be registered with GuC to the number of
doorbells, which is an undesired limitation. To avoid this limitation,
we requested the GuC team to also provide a H2G that will allow the host
to notify the GuC of work available for a specified lrc, so we can use
that mechanism instead of relying on the doorbells. We can therefore drop
the doorbell code we currently have, also given the fact that in the
unlikely case we'd want to switch back to using doorbells we'd have to
heavily rework it.
The workqueue will still have a use in the new interface to pass special
commands, so that code has been retained for now.
With the doorbells gone and the GuC client becoming even simpler, the
existing GuC selftests don't give us any meaningful coverage so we can
remove them as well. Some selftests might come with the new code, but
they will look different from what we have now so if doesn't seem worth
it to keep the file around in the meantime.
v2: fix comments and commit message (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-3-daniele.ceraolospurio@intel.com
Commit 50d84418f5 ("drm/i915: Add i915 to i915_inject_probe_failure")
introduced new functions unfortunately named incompatibly with rules
established by commit f2db53f14d ("drm/i915: Replace "_load" with
"_probe" consequently"). Fix it for consistency.
Suggested-by: Michał Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029102036.6326-2-janusz.krzysztofik@linux.intel.com
Avoid going to the base i915 device when we already have a path from gt
to the runtime powermanagement interface. The benefit is that it looks a
bit more self-consistent to always be acquiring the gt->uncore->rpm for
use with the gt->uncore.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154531.1750-1-chris@chris-wilson.co.uk
