Number of RPF's VSP is different on R-Car and RZ/G2L
R-Car Gen3 -> 5 RPFs
R-Car Gen2 -> 4 RPFs
RZ/G2L -> 2 RPFs
Add num_rpf to struct rcar_du_device_info to support later
SoC without any code changes.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The comment blocks at the beginning of each file have a one-line
summary description of the file that includes the file name. While the
description is useful, the file name only creates opportunities for
mistakes (as seen in rcar_du_vsp.c) without any added value. Drop it.
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar-du driver goes to great lengths to preserve device tree
backward compatibility for the LVDS encoders by patching old device
trees at runtime.
The last R-Car Gen2 platform was converted to the new bindings commit
edb0c3affe ("ARM: dts: r8a7793: Convert to new LVDS DT bindings"),
in v4.17, and the last RZ/G1 platform converted in commit
6a6a797625 ("ARM: dts: r8a7743: Convert to new LVDS DT bindings"),
in v5.0. Both are older than commit 58256143cf ("clk: renesas:
Remove R-Car Gen2 legacy DT clock support"), in v5.5, which removes
support for legacy bindings for clocks. The LVDS compatibility code is
thus not needed anymore. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-32-javierm@redhat.com
The DSI output names were not added when the DSI pipeline support was
introduced.
Add the correct labels for these outputs, and fix the sort order to
match 'enum rcar_du_output' while we are here.
Fixes: b291fdcf51 ("drm: rcar-du: Add r8a779a0 device support")
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Extend the rcar_du_device_info structure and rcar_du_output enum to
support DSI outputs and utilise these additions to provide support for
the R8A779A0 V3U platform.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Not all platforms require both per-crtc IRQ and per-crtc clock
management. In preparation for suppporting such platforms, split the
feature macro to be able to specify both features independently.
The other features are incremented accordingly, to keep the two crtc
features adjacent.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On R-Car Gen3, the DU uses a separate IP core named VSP to perform DMA
from memory and composition of planes. The DU hardware then only handles
the video timings and the interface with the encoders. This differs from
Gen2, where the DU included a composer with DMA engines.
When sourcing from the VSP, the DU hardware performs no memory access,
and thus has no requirements on imported dma-buf memory types. The GEM
CMA helpers however still create a DMA mapping to the DU device, which
isn't used. The mapping to the VSP is done when processing the atomic
commits, in the plane .prepare_fb() handler.
When the system uses an IOMMU, the VSP device is attached to it, which
enables the VSP to use non physically contiguous memory. The DU, as it
performs no memory access, isn't connected to the IOMMU. The GEM CMA
drm_gem_cma_prime_import_sg_table() helper will in that case fail to map
non-contiguous imported dma-bufs, as the DMA mapping to the DU device
will have multiple entries in its sgtable. The prevents using non
physically contiguous memory for display.
The DRM PRIME and GEM CMA helpers are designed to create the sgtable
when the dma-buf is imported. By default, the device referenced by the
drm_device is used to create the dma-buf attachment. Drivers can use a
different device by using the drm_gem_prime_import_dev() function. While
the DU has access to the VSP device, this won't help here, as different
CRTCs use different VSP instances, connected to different IOMMU
channels. The driver doesn't know at import time which CRTC a GEM object
will be used, and thus can't select the right VSP device to pass to
drm_gem_prime_import_dev().
To support non-contiguous memory, implement a custom
.gem_prime_import_sg_table() operation that accepts all imported dma-buf
regardless of the number of scatterlist entries. The sgtable will be
mapped to the VSP at .prepare_fb() time, which will reject the
framebuffer if the VSP isn't connected to an IOMMU.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The DU DMA address space is limited to 32 bits, so the DMA coherent mask
should be set accordingly. The DMA mapping implementation will
transparently map high memory buffers to 32-bit addresses through an
IOMMU when present (or through bounce buffers otherwise, which isn't a
supported use case as performances would be terrible).
However, when sourcing frames from a VSP, the situation is more
complicated. The DU delegates all memory accesses to the VSP and doesn't
perform any DMA access by itself. Due to how the GEM CMA helpers are
structured buffers are still mapped to the DU device. They are later
mapped to the VSP as well to perform DMA access, through the IOMMU
connected to the VSP.
Setting the DMA coherent mask to 32 bits for the DU when using a VSP can
cause issues when importing a dma_buf. If the buffer is located above
the 32-bit address space, the DMA mapping implementation will try to map
it to the DU's DMA address space. As the DU has no IOMMU a bounce buffer
will be allocated, which in the best case will waste memory and in the
worst case will just fail.
To work around this issue, set the DMA coherent mask to the full 40-bit
address space for the DU. All dma-buf instances will be imported without
any restriction, and will be mapped to the VSP when preparing the
associated framebuffer.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Improve the debugging and error messages printing when initializing
encoders by replacing the output number by the output name, printing the
bridge OF node name, and the error code of failed operations.
While at it, move the related rcar_du_output enumeration from
rcar_du_crtc.h to rcar_du_drv.h as it's not specific to the CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
When the device is unbound from the driver (the DU being a platform
device, this occurs either when removing the DU module, or when
unbinding the device manually through sysfs), the display may be active.
Make sure it gets shut down.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The reference to the drm_device that was acquired by
devm_drm_dev_alloc() is released automatically by the devres
infrastructure. It must not be released manually, as that causes a
reference underflow..
Fixes: ea6aae1518 ("drm: rcar-du: Embed drm_device in rcar_du_device")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
When the system shuts down or warm reboots, the display may be active,
with the hardware accessing system memory. Upon reboot, the DDR will not
be accessible, which may cause issues.
Implement the platform_driver .shutdown() operation and shut down the
display to fix this.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Now that drm_device is embedded in rcar_du_device, we can use
container_of to get the rcar_du_device pointer from the drm_device,
instead of using the drm_device.dev_private field.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Embedding drm_device in rcar_du_device allows usage of the DRM managed
API to allocate both structures in one go, simplifying error handling.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.
Note that for armada I also went ahead and made the ioctl array const.
Only cc'ing the driver people who've not been converted (everyone else
is way too much).
v2: Fix one misplaced const static, should be static const (0day)
v3:
- Improve commit message (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
Hookup RZ/G2H (R8A774E1) to DU driver. R8A774E1 has one RGB output,
one LVDS output and one HDMI output.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add direct support for the r8a7742 (RZ/G1H).
The RZ/G1H shares a common, compatible configuration with the r8a7790
(R-Car H2) so that device info structure is reused, the only difference
being TCON is unsupported on RZ/G1H (Currently unsupported by the driver).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE sets the functions in
struct drm_driver to their defaults. No functional changes are
made.
v2:
* update for DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-31-tzimmermann@suse.de
Create GEM objects with drm_gem_cma_create_object_default_funcs(), which
allocates the object and sets CMA's default object functions. Corresponding
callbacks in struct drm_driver are cleared. No functional changes are made.
Driver and object-function instances use the same callback functions, with
the exception of vunmap. The implementation of vunmap is empty and left out
in CMA's default object functions.
v3:
* convert to DRIVER_OPS macro in a separate patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-30-tzimmermann@suse.de
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: Another driver with a bit much devm_kzalloc, which should
probably use drmm_kzalloc instead ...
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v2)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-37-daniel.vetter@ffwll.ch
Add direct support for the r8a77980 (V3H).
The V3H shares a common, compatible configuration with the r8a77970
(V3M) so that device info structure is reused.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add support for the R8A774B1 DU (which is very similar to the R8A77965 DU
except that it lacks TCON and CMM); it has one RGB output, one LVDS output
and one HDMI output.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
They're the default.
Aside: Would be really nice to switch the others over to
drm_gem_object_funcs.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-27-daniel.vetter@ffwll.ch
Add support for the R8A774A1 DU (which is very similar to the R8A7796 DU
except that it lacks TCON and CMM); it has one RGB output, one LVDS output
and one HDMI output.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused rcar-du to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
Build tested on arm allmodconfig/allyesconfig.
v2:
- new patch. Changes like drm_probe_helper and other
required several updates
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-4-sam@ravnborg.org
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
The DRM kernel API used to be defined in a handful of headers, pulled in
through drmP.h. It has since been split in multiple headers for the
different DRM components, and drmP.h turned into a legacy header that
just pulls in most of the DRM kernel API (and a large number of other
miscellaneous kernel headers).
In order to speed up compilation, replace inclusion of drmP.h with only
the required headers. It turns out that the rcar-du-drm driver already
includes most of the necessary headers, so the change is simple.
While at it, remove unneeded inclusion of other headers, and unneeded
forward declarations of structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The RCAR_DU_FEATURE_EXT_CTRL_REGS feature flag is missing for H1 only,
which is a first generation device, not a second generation device as
reported in the device information table. Fix the H1 generation and use
generation checks to replace the feature flag.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Add support for the RZ/G2E (R8A774C0) SoC to the R-Car DU driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-4-noralf@tronnes.org
Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
it has 1 DPAD (RGB) output and 1 LVDS output.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
remove suspend_state field from the rcar_du_device
structure as it is no more required.
With this conversion, also drm_fbdev_cma_set_suspend_unlocked()
will left with no consumer. So this function can be removed.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918163903.GA11172@jordon-HP-15-Notebook-PC
Add support for the R-Car D3 (R8A77995) and E3 (R8A77990) SoCs to the
R-Car DU driver. The two SoCs instantiate compatible DUs, so a single
information structure is enough.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
[Add support for R8A77990]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The official way to stop the display is to clear the display enable
(DEN) bit in the DSYSR register, but that operates at a group level and
affects the two channels in the group. To disable channels selectively,
the driver uses TV sync mode that stops display operation on the channel
and turns output signals into inputs.
While TV sync mode is available in all DU models currently supported,
the D3 and E3 DUs don't support it. We will thus need to find an
alternative way to turn channels off.
In the meantime, condition the switch to TV sync mode to the
availability of the feature, to avoid writing an invalid value to the
DSYSR register. When the feature is unavailable the display output will
turn blank as all planes are disabled when stopping the CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Document and re-name the 'dpll_ch' field to a more precise 'dpll_mask' for
consistency with the 'channels_mask' field defined in 'struct
rcar_du_device_info'.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Upcoming implementations of the R-Car DU have removed support for
interlaced display pipelines. Provide a means to determine this based on
the feature flags of the hardware configuration structs.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Kconfig doesn't have license line, thus, it is GPL-2.0 as default.
rcar_du_regs.h, rcar_lvds_regs.h are GPL-2.0,
and all other files are GPL-2.0+ as original license.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The R8A77965 (M3-N) SoC provides RGB, HDMI and LVDS output.
This platform is unusual in that the RGB is connected to DU3 leaving DU2
unpopulated. This is reflected by the channels_mask accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU CRTC driver does not support distinguishing between a hardware
index, and a software (CRTC) index in the event that a DU channel might
not be populated by the hardware.
Support this by adapting the rcar_du_device_info structure to store a
bitmask of available channels rather than a count of CRTCs. The count
can then be obtained by determining the hamming weight of the bitmask.
This allows the rcar_du_crtc_create() function to distinguish between
both index types, and non-populated DU channels will be skipped without
leaving a gap in the software CRTC indexes.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add support for the R-Car V3M (R8A77970) SoC to the R-Car DU driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The LVDS encoders used to be described in DT as part of the DU. They now
have their own DT node, linked to the DU using the OF graph bindings.
This allows moving internal LVDS encoder support to a separate driver
modelled as a DRM bridge. Backward compatibility is retained as legacy
DT is patched live to move to the new bindings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
To support system suspend operations we must ensure the hardware is
stopped, and resumed explicitly from the suspend and resume handlers.
Implement suspend and resume functions using the DRM atomic helper
functions.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add support for the R8A7745 DU (which is very similar to the R8A7794 DU);
it has 2 RGB outputs.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
