Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else
needs Tasks Trace RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Trace.
However, there is a need to select CONFIG_TASKS_TRACE_RCU for
testing purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is thus
a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, any kernel built with CONFIG_PREEMPTION=y also gets
CONFIG_TASKS_RCU=y, which is not helpful to people trying to build
preemptible kernels of minimal size.
Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of
one form or another, this commit moves from TASKS_RCU deciding when it
should be enabled to the tracing Kconfig options explicitly selecting it.
This allows building preemptible kernels without TASKS_RCU, if desired.
This commit also updates the SRCU-N and TREE09 rcutorture scenarios
in order to avoid Kconfig errors that would otherwise result from
CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency
being met.
[ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ]
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When booting kernels built with both CONFIG_RCU_STRICT_GRACE_PERIOD=y
and CONFIG_PREEMPT_RT=y, the rcu_read_unlock_special() function's
invocation of irq_work_queue_on() the init_irq_work() causes the
rcu_preempt_deferred_qs_handler() function to work execute in SCHED_FIFO
irq_work kthreads. Because rcu_read_unlock_special() is invoked on each
rcu_read_unlock() in such kernels, the amount of work just keeps piling
up, resulting in a boot-time hang.
This commit therefore avoids this hang by using IRQ_WORK_INIT_HARD()
instead of init_irq_work(), but only in kernels built with both
CONFIG_PREEMPT_RT=y and CONFIG_RCU_STRICT_GRACE_PERIOD=y.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_sync_enter() function is used by updaters to force RCU readers
(e.g. percpu-rwsem) to use their slow paths during an update. This is
accomplished by setting the ->gp_state of the rcu_sync structure to
GP_ENTER. In the case of percpu-rwsem, the readers' slow path waits on
a semaphore instead of just incrementing a reader count. Each updater
invokes the rcu_sync_exit() function to signal to readers that they
may again take their fastpaths. The rcu_sync_exit() function sets the
->gp_state of the rcu_sync structure to GP_EXIT, and if all goes well,
after a grace period the ->gp_state reverts back to GP_IDLE.
Unfortunately, the rcu_sync_enter() function currently has a comment
incorrectly stating that rcu_sync_exit() (by an updater) will re-enable
reader "slowpaths". This patch changes the comment to state that this
function re-enables reader fastpaths.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For the spawning of the priority-boost kthreads can fail, improbable
though this might seem. This commit therefore refrains from attemoting
to initiate RCU priority boosting when The ->boost_kthread_task pointer
is NULL.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An early check on synchronize_rcu[_expedited]() tries to determine if
the current CPU is in UP mode on an SMP no-preempt kernel, in which case
there is no need to start a grace period since the current assumed
quiescent state is all we need.
However the preemption mode doesn't take into account the boot selected
preemption mode under CONFIG_PREEMPT_DYNAMIC=y, missing a possible
early return if the running flavour is "none" or "voluntary".
Use the shiny new preempt mode accessors to fix this. However,
avoid invoking them during early boot because doing so triggers a
WARN_ON_ONCE().
[ paulmck: Update for mainlined API. ]
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU's synchronous grace periods act quite differently when there is
only one online CPU, especially in the no-op case in kernels built with
CONFIG_PREEMPTION=n. This change in behavior can be important debugging
information, so this commit adds the number of online CPUs to the RCU
CPU stall warning messages.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The final "if" statement in rcu_gp_cleanup() has proven to be rather
confusing, straightforward though it might have seemed when initially
written. This commit therefore adds comments to its "then" and "else"
clauses to at least provide a more elevated form of confusion.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Debugging of problems involving insanely long-running SMI handlers
proceeds better if the CSD-lock timeout can be adjusted. This commit
therefore provides a new smp.csd_lock_timeout kernel boot parameter
that specifies the timeout in milliseconds. The default remains at the
previously hard-coded value of five seconds.
[ paulmck: Apply feedback from Juergen Gross. ]
Cc: Rik van Riel <riel@surriel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
bpf_{sk,task,inode}_storage_free() do not need to use
call_rcu_tasks_trace as no BPF program should be accessing the owner
as it's being destroyed. The only other reader at this point is
bpf_local_storage_map_free() which uses normal RCU.
The only path that needs trace RCU are:
* bpf_local_storage_{delete,update} helpers
* map_{delete,update}_elem() syscalls
Fixes: 0fe4b381a5 ("bpf: Allow bpf_local_storage to be used by sleepable programs")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220418155158.2865678-1-kpsingh@kernel.org
It is guaranteed that for modifiers, clang always places type tags
before other modifiers, and then the base type. We would like to rely on
this guarantee inside the kernel to make it simple to parse type tags
from BTF.
However, a user would be allowed to construct a BTF without such
guarantees. Hence, add a pass to check that in modifier chains, type
tags only occur at the head of the chain, and then don't occur later in
the chain.
If we see a type tag, we can have one or more type tags preceding other
modifiers that then never have another type tag. If we see other
modifiers, all modifiers following them should never be a type tag.
Instead of having to walk chains we verified previously, we can remember
the last good modifier type ID which headed a good chain. At that point,
we must have verified all other chains headed by type IDs less than it.
This makes the verification process less costly, and it becomes a simple
O(n) pass.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220419164608.1990559-2-memxor@gmail.com
This problem can be reproduced with CONFIG_PERF_USE_VMALLOC enabled on
both x86_64 and aarch64 arch when using sysdig -B(using ebpf)[1].
sysdig -B works fine after rebuilding the kernel with
CONFIG_PERF_USE_VMALLOC disabled.
I tracked it down to the if condition event->rb->nr_pages != nr_pages
in perf_mmap is true when CONFIG_PERF_USE_VMALLOC is enabled where
event->rb->nr_pages = 1 and nr_pages = 2048 resulting perf_mmap to
return -EINVAL. This is because when CONFIG_PERF_USE_VMALLOC is
enabled, rb->nr_pages is always equal to 1.
Arch with CONFIG_PERF_USE_VMALLOC enabled by default:
arc/arm/csky/mips/sh/sparc/xtensa
Arch with CONFIG_PERF_USE_VMALLOC disabled by default:
x86_64/aarch64/...
Fix this problem by using data_page_nr()
[1] https://github.com/draios/sysdig
Fixes: 906010b213 ("perf_event: Provide vmalloc() based mmap() backing")
Signed-off-by: Zhipeng Xie <xiezhipeng1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220209145417.6495-1-xiezhipeng1@huawei.com
The warning in cfs_rq_is_decayed() triggered:
SCHED_WARN_ON(cfs_rq->avg.load_avg ||
cfs_rq->avg.util_avg ||
cfs_rq->avg.runnable_avg)
There exists a corner case in attach_entity_load_avg() which will
cause load_sum to be zero while load_avg will not be.
Consider se_weight is 88761 as per the sched_prio_to_weight[] table.
Further assume the get_pelt_divider() is 47742, this gives:
se->avg.load_avg is 1.
However, calculating load_sum:
se->avg.load_sum = div_u64(se->avg.load_avg * se->avg.load_sum, se_weight(se));
se->avg.load_sum = 1*47742/88761 = 0.
Then enqueue_load_avg() adds this to the cfs_rq totals:
cfs_rq->avg.load_avg += se->avg.load_avg;
cfs_rq->avg.load_sum += se_weight(se) * se->avg.load_sum;
Resulting in load_avg being 1 with load_sum is 0, which will trigger
the WARN.
Fixes: f207934fb7 ("sched/fair: Align PELT windows between cfs_rq and its se")
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
[peterz: massage changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20220414090229.342-1-kuyo.chang@mediatek.com
Commit 7d08c2c911 ("bpf: Refactor BPF_PROG_RUN_ARRAY family of macros
into functions") switched a bunch of BPF_PROG_RUN macros to inline
routines. This changed the semantic a bit. Due to arguments expansion
of macros, it used to be:
rcu_read_lock();
array = rcu_dereference(cgrp->bpf.effective[atype]);
...
Now, with with inline routines, we have:
array_rcu = rcu_dereference(cgrp->bpf.effective[atype]);
/* array_rcu can be kfree'd here */
rcu_read_lock();
array = rcu_dereference(array_rcu);
I'm assuming in practice rcu subsystem isn't fast enough to trigger
this but let's use rcu API properly.
Also, rename to lower caps to not confuse with macros. Additionally,
drop and expand BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY.
See [1] for more context.
[1] https://lore.kernel.org/bpf/CAKH8qBs60fOinFdxiiQikK_q0EcVxGvNTQoWvHLEUGbgcj1UYg@mail.gmail.com/T/#u
v2
- keep rcu locks inside by passing cgroup_bpf
Fixes: 7d08c2c911 ("bpf: Refactor BPF_PROG_RUN_ARRAY family of macros into functions")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220414161233.170780-1-sdf@google.com
* irq/gpio-immutable:
: .
: First try at preventing the GPIO subsystem from abusing irq_chip
: data structures. The general idea is to have an irq_chip flag
: to tell the GPIO subsystem that these structures are immutable,
: and to convert drivers one by one.
: .
Documentation: Update the recommended pattern for GPIO irqchips
gpio: Update TODO to mention immutable irq_chip structures
pinctrl: amd: Make the irqchip immutable
pinctrl: msmgpio: Make the irqchip immutable
pinctrl: apple-gpio: Make the irqchip immutable
gpio: pl061: Make the irqchip immutable
gpio: tegra186: Make the irqchip immutable
gpio: Add helpers to ease the transition towards immutable irq_chip
gpio: Expose the gpiochip_irq_re[ql]res helpers
gpio: Don't fiddle with irqchips marked as immutable
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to move away from gpiolib messing with the internals of
unsuspecting irqchips, add a flag by which irqchips advertise
that they are not to be messed with, and do solemnly swear that
they correctly call into the gpiolib helpers when required.
Also nudge the users into converting their drivers to the
new model.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419141846.598305-2-maz@kernel.org
drm/drm-next has a build fix for the NewVision NV3052C panel
(drivers/gpu/drm/panel/panel-newvision-nv3052c.c), which needs to be
merged back to drm-misc-next, as it was failing to build there.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
No users left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To shared more code between swiotlb and xen-swiotlb, offer a
swiotlb_init_remap interface and add a remap callback to
swiotlb_init_late that will allow Xen to remap the buffer without
duplicating much of the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Let the caller chose a zone to allocate from. This will be used
later on by the xen-swiotlb initialization on arm.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Power SVM wants to allocate a swiotlb buffer that is not restricted to
low memory for the trusted hypervisor scheme. Consolidate the support
for this into the swiotlb_init interface by adding a new flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.
Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
swiotlb_late_init_with_default_size is an overly verbose name that
doesn't even catch what the function is doing, given that the size is
not just a default but the actual requested size.
Rename it to swiotlb_init_late.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Remove the bogus Xen override that was usually larger than the actual
size and just calculate the value on demand. Note that
swiotlb_max_segment still doesn't make sense as an interface and should
eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
If force bouncing is enabled we can't release the buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Use the more specific is_swiotlb_active check instead of checking the
global swiotlb_force variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
- Fix the warning condition in __run_timers() which does not take into
account, that a CPU base (especially the deferrable base) has never a
timer armed on it and therefore the next_expiry value can become stale.
- Replace a WARN_ON() in the NOHZ code with a WARN_ON_ONCE() to prevent
endless spam in dmesg.
- Remove the double star from a comment which is not meant to be in
kernel-doc format.
-----BEGIN PGP SIGNATURE-----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=SffK
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for the timers core:
- Fix the warning condition in __run_timers() which does not take
into account that a CPU base (especially the deferrable base) never
has a timer armed on it and therefore the next_expiry value can
become stale.
- Replace a WARN_ON() in the NOHZ code with a WARN_ON_ONCE() to
prevent endless spam in dmesg.
- Remove the double star from a comment which is not meant to be in
kernel-doc format"
* tag 'timers-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Fix non-kernel-doc comment
tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
timers: Fix warning condition in __run_timers()
- Make the warning condition in flush_smp_call_function_queue() correct,
which checks a just emptied list head for being empty instead of
validating that there was no pending entry on the offlined CPU at all.
- The @cpu member of struct cpuhp_cpu_state is initialized when the CPU
hotplug thread for the upcoming CPU is created. That's too late because
the creation of the thread can fail and then the following rollback
operates on CPU0. Get rid of the CPU member and hand the CPU number to
the involved functions directly.
-----BEGIN PGP SIGNATURE-----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=XNLP
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP core:
- Make the warning condition in flush_smp_call_function_queue()
correct, which checked a just emptied list head for being empty
instead of validating that there was no pending entry on the
offlined CPU at all.
- The @cpu member of struct cpuhp_cpu_state is initialized when the
CPU hotplug thread for the upcoming CPU is created. That's too late
because the creation of the thread can fail and then the following
rollback operates on CPU0. Get rid of the CPU member and hand the
CPU number to the involved functions directly"
* tag 'smp-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
smp: Fix offline cpu check in flush_smp_call_function_queue()
account that there can be an imbalance between present and possible CPUs,
which causes already assigned bits to be overwritten.
-----BEGIN PGP SIGNATURE-----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=wSdp
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the interrupt affinity spreading logic to take into
account that there can be an imbalance between present and possible
CPUs, which causes already assigned bits to be overwritten"
* tag 'irq-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Consider that CPUs on nodes can be unbalanced
On PREEMPT_RT kernel and KASAN is enabled. the kasan_record_aux_stack()
may call alloc_pages(), and the rt-spinlock will be acquired, if currently
in atomic context, will trigger warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 239, name: bootlogd
Preemption disabled at:
[<ffffffffbab1a531>] rt_mutex_slowunlock+0xa1/0x4e0
CPU: 3 PID: 239 Comm: bootlogd Tainted: G W 5.17.1-rt17-yocto-preempt-rt+ #105
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Call Trace:
__might_resched.cold+0x13b/0x173
rt_spin_lock+0x5b/0xf0
get_page_from_freelist+0x20c/0x1610
__alloc_pages+0x25e/0x5e0
__stack_depot_save+0x3c0/0x4a0
kasan_save_stack+0x3a/0x50
__kasan_record_aux_stack+0xb6/0xc0
kasan_record_aux_stack+0xe/0x10
irq_work_queue_on+0x6a/0x1c0
pull_rt_task+0x631/0x6b0
do_balance_callbacks+0x56/0x80
__balance_callbacks+0x63/0x90
rt_mutex_setprio+0x349/0x880
rt_mutex_slowunlock+0x22a/0x4e0
rt_spin_unlock+0x49/0x80
uart_write+0x186/0x2b0
do_output_char+0x2e9/0x3a0
n_tty_write+0x306/0x800
file_tty_write.isra.0+0x2af/0x450
tty_write+0x22/0x30
new_sync_write+0x27c/0x3a0
vfs_write+0x3f7/0x5d0
ksys_write+0xd9/0x180
__x64_sys_write+0x43/0x50
do_syscall_64+0x44/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by using kasan_record_aux_stack_noalloc() to avoid the call to
alloc_pages().
Link: https://lkml.kernel.org/r/20220402142555.2699582-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If CONFIG_SYSCTL and CONFIG_DYNAMIC_FTRACE is n, build warns:
kernel/trace/ftrace.c:7912:13: error: ‘is_permanent_ops_registered’ defined but not used [-Werror=unused-function]
static bool is_permanent_ops_registered(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/trace/ftrace.c:89:12: error: ‘last_ftrace_enabled’ defined but not used [-Werror=unused-variable]
static int last_ftrace_enabled;
^~~~~~~~~~~~~~~~~~~
Move is_permanent_ops_registered() to ifdef block and mark last_ftrace_enabled as
__maybe_unused to fix this.
Fixes: 7cde53da38a3 ("ftrace: move sysctl_ftrace_enabled to ftrace.c")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mALw
-----END PGP SIGNATURE-----
Merge tag 'tai-for-tracing' into timers/core
Pull in the NMI safe TAI accessor which was provided for the tracing tree
to prepare for further changes in this area.
Introduce fast/NMI safe accessor to clock tai for tracing. The Linux kernel
tracing infrastructure has support for using different clocks to generate
timestamps for trace events. Especially in TSN networks it's useful to have TAI
as trace clock, because the application scheduling is done in accordance to the
network time, which is based on TAI. With a tai trace_clock in place, it becomes
very convenient to correlate network activity with Linux kernel application
traces.
Use the same implementation as ktime_get_boot_fast_ns() does by reading the
monotonic time and adding the TAI offset. The same limitations as for the fast
boot implementation apply. The TAI offset may change at run time e.g., by
setting the time or using adjtimex() with an offset. However, these kind of
offset changes are rare events. Nevertheless, the user has to be aware and deal
with it in post processing.
An alternative approach would be to use the same implementation as
ktime_get_real_fast_ns() does. However, this requires to add an additional u64
member to the tk_read_base struct. This struct together with a seqcount is
designed to fit into a single cache line on 64 bit architectures. Adding a new
member would violate this constraint.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220414091805.89667-2-kurt@linutronix.de
Although setting the affinity of an interrupt to a set of CPUs that doesn't
have any online CPU is generally frowned apon, there are a few limited
cases where such affinity is set from a CPUHP notifier, setting the
affinity to a CPU that isn't online yet.
The saving grace is that this is always done using the 'force' attribute,
which gives a hint that the affinity setting can be outside of the online
CPU mask and the callsite set this flag with the knowledge that the
underlying interrupt controller knows to handle it.
This restores the expected behaviour on Marek's system.
Fixes: 33de0aa4ba ("genirq: Always limit the affinity to online CPUs")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/4b7fc13c-887b-a664-26e8-45aed13f048a@samsung.com
Link: https://lore.kernel.org/r/20220414140011.541725-1-maz@kernel.org
x86-32 was the last architecture that implemented separate user and
kernel registers.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220325153953.162643-3-brgerst@gmail.com
When we looked into FIO performance with swiotlb enabled in VM, we found
swiotlb_bounce() is always called one more time than expected for each DMA
read request.
It turns out that the bounce buffer is copied to original DMA buffer twice
after the completion of a DMA request (one is done by in
dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()).
But the content in bounce buffer actually doesn't change between the two
rounds of copy. So, one round of copy is redundant.
Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to
skip the memory copy in it.
This fix increases FIO 64KB sequential read throughput in a guest with
swiotlb=force by 5.6%.
Fixes: 55897af630 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Reported-by: Wang Zhaoyang1 <zhaoyang1.wang@intel.com>
Reported-by: Gao Liang <liang.gao@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We're moving sysctls out of kernel/sysctl.c as it is a mess. We
already moved all filesystem sysctls out. And with time the goal
is to move all sysctls out to their own subsystem/actual user.
kernel/sysctl.c has grown to an insane mess and its easy to run
into conflicts with it. The effort to move them out into various
subsystems is part of this.
Signed-off-by: Yan Zhu <zhuyan34@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/bpf/20220407070759.29506-1-zhuyan34@huawei.com
Rather than waiting until a CPU is first brought online, do the
initialisation of the cpuhp_cpu_state structure for each CPU during the
__init phase. This saves a (small) amount of non-__init memory and
avoids potential confusion about when the cpuhp_cpu_state struct is
valid.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220411152233.474129-3-steven.price@arm.com
Currently the setting of the 'cpu' member of struct cpuhp_cpu_state in
cpuhp_create() is too late as it is used earlier in _cpu_up().
If kzalloc_node() in __smpboot_create_thread() fails then the rollback will
be done with st->cpu==0 causing CPU0 to be erroneously set to be dying,
causing the scheduler to get mightily confused and throw its toys out of
the pram.
However the cpu number is actually available directly, so simply remove
the 'cpu' member and avoid the problem in the first place.
Fixes: 2ea46c6fc9 ("cpumask/hotplug: Fix cpu_dying() state tracking")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220411152233.474129-2-steven.price@arm.com
The check in flush_smp_call_function_queue() for callbacks that are sent
to offline CPUs currently checks whether the queue is empty.
However, flush_smp_call_function_queue() has just deleted all the
callbacks from the queue and moved all the entries into a local list.
This checks would only be positive if some callbacks were added in the
short time after llist_del_all() was called. This does not seem to be
the intention of this check.
Change the check to look at the local list to which the entries were
moved instead of the queue from which all the callbacks were just
removed.
Fixes: 8d056c48e4 ("CPU hotplug, smp: flush any pending IPI callbacks before CPU offline")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220319072015.1495036-1-namit@vmware.com
Change the comment to a normal (non-kernel-doc) comment to avoid
these kernel-doc warnings:
kernel/power/snapshot.c:335: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Data types related to memory bitmaps.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add parameter description in alloc_rtree_node() kernel-doc
comment and fix several inconsistent function name descriptions.
Remove some warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
kernel/power/snapshot.c:438: warning: Function parameter or member
'gfp_mask' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member
'safe_needed' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member 'ca'
not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member
'list' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:916: warning: expecting prototype for
memory_bm_rtree_next_pfn(). Prototype was for memory_bm_next_pfn()
instead
kernel/power/snapshot.c:1947: warning: expecting prototype for
alloc_highmem_image_pages(). Prototype was for alloc_highmem_pages()
instead
kernel/power/snapshot.c:2230: warning: expecting prototype for load
header(). Prototype was for load_header() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Comment adjustments to avoid line breaks ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently pm_pr_dbg() is used to filter kernel pm debug messages based
on pm_debug_messages_on flag. The problem is if we enable/disable this
flag it will affect all pm_pr_dbg() calls at once, so we can't
individually control them.
This patch changes pm_pr_dbg() implementation as such:
- If pm_debug_messages_on is enabled, print the message.
- If pm_debug_messages_on is disabled and CONFIG_DYNAMIC_DEBUG is
enabled, only print the messages explicitly enabled on
/sys/kernel/debug/dynamic_debug/control.
- If pm_debug_messages_on is disabled and CONFIG_DYNAMIC_DEBUG is
disabled, don't print the message.
Signed-off-by: David Cohen <dacohen@pm.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The macro -DDEBUG is broadly enabled on kernel/power/ directory if
CONFIG_DYNAMIC_DEBUG is enabled. As side effect all debug messages using
pr_debug() and dev_dbg() are enabled by default on dynamic debug.
We're reworking pm_pr_dbg() to support dynamic debug, where pm_pr_dbg()
will print message if either pm_debug_messages_on flag is set or if it's
explicitly enabled on dynamic debug's control. That means if we let
-DDEBUG broadly set, the pm_debug_messages_on flag will be bypassed by
default on pm_pr_dbg() if dynamic debug is also enabled.
The files that directly use pr_debug() and dev_dbg() on kernel/power/ are:
- swap.c
- snapshot.c
- energy_model.c
And those files do not use pm_pr_dbg(). So if we limit -DDEBUG to them,
we keep the same functional behavior while allowing the pm_pr_dbg()
refactor.
Signed-off-by: David Cohen <dacohen@pm.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
