The BE DAI driver ops involve operations that are IPC-specific. For ex:
for the HDA DAI, the trigger op involves sending the DAI_CONFIG IPC to
the DSP to stop the DMA for the stop/pause commands. This sequence is
different for IPC3 and IPC4. So, make the dai driver ops IPC-specific
and set the IPC3-specific ops during the ops_init() callback.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequence for IMR boot is essentially the same as normal boot with the
difference that instead of DMA from host the firmware is loaded from IMR.
Re-structure the code to use the existing sequence and also add fallback
handling in case the IMR boot fails.
Introduce a new flag to make the IMR boot support check simpler.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421202031.1548362-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds an IP identifier for each Intel platform. The
identifier will be used to select different code branches or
constants.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the rom_status_reg field to struct sof_intel_dsp_desc and define
it for HDA platforms. This will be used to check the ROM status during
FW boot.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the check_ipc_irq op for HDA platforms and use it
when checking if it is an IPC IRQ.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dsp_ops are mostly common between platforms. Introduce a common
structure and an init function to set platform-specific values.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we start having multiple platforms with minor variants, the
use of the const qualifier for 'dsp_ops' is starting to be
sub-optimal: the structures are copied across platforms, with only a
couple of members that differ.
This patch removes the const qualifier without any functionality
changes, and adds an optional initialization callback. In follow-up
patches, the dsp_ops will revisited for Intel HDaudio platforms, with
the differences added programmatically over a common baseline.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch from the IPC dependent ipc_pcm_params() ops to the IPC neutral
set_stream_data_offset().
Remove the no longer used hda_ipc_pcm_params() function as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new client driver for probes support and move
all the probes-related code from the core to the
client driver.
The probes client driver registers a component driver
with one CPU DAI driver for extraction and creates a
new sound card with one DUMMY DAI link with a dummy codec
that will be used for extracting audio data from specific
points in the audio pipeline.
The probes debugfs ops are based on the initial
implementation by Cezary Rojewski and have been moved
out of the SOF core into the client driver making it
easier to maintain. This change will make it easier
for the probes functionality to be added for all platforms
without having the need to modify the existing(15+) machine
drivers.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the ICL specific ops to icl.c. Also introduce a
macro ICL_DSP_HPRO_CORE_ID to define the core that
should be powered up when HPRO is enabled.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we disable rewinds, then the .ack can be used to program SPIB
with the application pointer, which allows the HDaudio DMA to save
power by opportunistically bursting data transfers when the path to
memory is enabled (and conversely to shut it down when there are no
transfer requests).
The SPIB register can only be programmed with incremental values with
wrap-around after the DMA RUN bits are set. For simplicity, we set the
INFO_NO_REWINDS flag in the .open callback when we already need to
program the SNDRV_PCM_INFO_SYNC_APPLPTR flag.
Rewinds are not used by many applications. One notable application
using rewinds is PulseAudio. Practical experiments with
Ubuntu/PulseAudio default settings did not show any audible issues,
but the user may hear volume changes and notification with a delay,
depending on the size of the ring buffer and latency constraints.
The choice of disabling rewinds is exposed as a kernel parameter and
not a Kconfig option to avoid any undesirable side-effects.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211119230852.206310-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for dynamic pipelines with multi-core
by using the platform-specific core_get/put() ops to
power up/down a core when a widget is set up/freed.
Along with this, a few redundant functions are removed:
1. sof_pipeline_core_enable() is no longer needed as the
pipeline core will be set up when the pipeline widget
is set up
2. sof_core_enable() is replaced with snd_sof_core_get()
4. core_power_up/down() DSP ops are deprecated and replaced with
core get/put ops.
5. Core power down in sof_widget_unload() during topology
removal is also removed as it is not really needed. For dynamic
pipelines, the cores will be powered off when they are not used.
For static pipelines, the cores will be powered off in the device
remove callback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set core_get/put ops for CNL/ICL platforms. These platforms
do not support enabling/disabling secondary cores
dynamically. So skip sending the IPC to power off the
cores in the core_put op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to introduce snd_sof_mailbox_{read/write} in order to provide
a generic way for mailbox access. These routines are optional, each
platform can implement their own specific routines.
So far, all platforms use mmapped I/O thus they can use custom made
routines sof_mailbox_read / sof_mailbox_write that use MMIO.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
From the name sof_arch_ops one can not decipher that these ops are DSP
architecture ops.
Rename it to dsp_arch_ops and change also the macro to retrieve the DSP
architecture specific ops as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210916130308.7969-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the generic iomem callback for debugfs_add_region_item to avoid
regression when the core switches to use the generic interface for
the regions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210915122116.18317-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire IRQ status checks are platform-dependent, add new ops structure
to provide abstraction.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210723115451.7245-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sdw_shim_base and sdw_alh_base are platform-dependent. This change allow
us to define different sdw shim/alh base for each platform.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210723115451.7245-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the dsp ops for ICL ops to specify the use of ICCMAX
FW boot sequence in the run op. All other ops are identical with TGL
except post_fw_run. The recommended HW programming sequence for ICL
is to power up core 3 and keep it in stall if HPRO is enabled.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
