Ignore ras umc bad page threshold by default, GPU initialization won't
be stopped in this mode.
v2: refine the description of bad_page_threshold.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD: important for conformance on gfx11
Other fields are exposed from IP discovery.
enabled_rb_pipes_mask_hi is added for future chips, currently 0.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APUs before Raven didn't support s0ix. As we just relieved some
of the safety checks for s0ix to improve power consumption on
APUs that support it but that are missing BIOS support a new
blind spot was introduced that a user could "try" to run s0ix.
Plug this hole so that if users try to run s0ix on anything older
than Raven it will just skip suspend of the GPU.
Fixes: cf488dcd0a ("drm/amd: Allow s0ix without BIOS support")
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some users have reported flickerng with S/G display. We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to. We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
Add a option to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.
v2: fix typo
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit fac53471d0.
The following change: move the drm_dev_unplug call after
amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is
the following: amdgpu_pci_remove calls drm_dev_unregister
and it should be called first to ensure userspace can't access the
device instance anymore. If we call drm_dev_unplug after
amdgpu_driver_unload_kms then we observe IGT PCI software unplug
test failure (kernel hung) for all ASICs. This is how this
regression was found.
After this revert, the following commands do work not, but it would
be fixed in the next commit:
- sudo modprobe -r amdgpu
- sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For computing PCIe bandwidth in userspace and troubleshooting PCIe
bandwidth issues. Note that this intentionally fills holes and padding
in drm_amdgpu_info_device.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing the firmware framebuffer from the driver means that even
if the driver doesn't support the IP blocks in a GPU it will no
longer be functional after the driver fails to initialize.
This change will ensure that unsupported IP blocks at least cause
the driver to work with the EFI framebuffer.
Cc: stable@vger.kernel.org
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit de05abe6b9.
The bug referenced below was bisected to this commit. There has been no
activity toward fixing it in 3 months, so let's revert for now.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows testing the driver without any VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update AMDGPU_INFO_DEV_INFO IOCTL for minimum engine and memory clock.
And update AMDGPU_INFO_SENSOR IOCTL for PEAK_PSTATE engine and memory clock.
User applications can better utilize these IOCTLs to get needed informations.
Increase the minor version number to indicate that the new flags are
available.
Proposed mesa patch:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some special polaris 10 chips overlap with the polaris11
DID range. Handle this properly in the driver.
v2: use local flags for other function calls.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Document difference between amdgpu.gartsize and amdgpu.gttsize
module parameters, as initially explained by Alex Deucher here:
https://lists.freedesktop.org/archives/dri-devel/2022-October/375358.html
v2: minor cleanups (Alex)
Signed-off-by: Peter Maucher <bellosilicio@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Runtime PM can happen pretty frequently, as these printings
may be annoyed, switch to dev_dbg.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an explicit printing to tell when finishing rpm execution
in amdgpu.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: f7ba887f60 ("drm/amdgpu: Adjust logic around GTT size (v3)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-6.2-2022-11-18:
amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup
amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3
amd-drm-next-6.2-2022-11-11:
amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path
amdkfd:
- Fix possible memory overrun
- CRIU fixes
radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory
UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
These are used internally in the driver to align location based memory coherency
requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They
are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
They are just used internally in the kernel driver for now for existing KFD memory
allocations. So a change to the UAPI header, but no functional change in the UAPI.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit e6c6338f39.
This feature basically re-submits one job after another to
figure out which one was the one causing a hang.
This is obviously incompatible with gang-submit which requires
that multiple jobs run at the same time. It's also absolutely
not helpful to crash the hardware multiple times if a clean
recovery is desired.
For testing and debugging environments we should rather disable
recovery alltogether to be able to inspect the state with a hw
debugger.
Additional to that the sw implementation is clearly buggy and causes
reference count issues for the hardware fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change the vangogh family to use IP discovery path to initialize IP
list, this needs to remove the DID from the PCI ID list to allow the IP
discovery path to set all the IP versions correctly.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several places where we don't want to check
if a particular asic could support DC, but rather, if
DC is enabled. Set a flag if DC is enabled and check
for that rather than if a device supports DC or not.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
The recent change brought a bug on SRIOV envrionment. It caused
unloading amdgpu failed on Guest VM. The reason is that the VF
FLR was requested while unloading amdgpu driver, but the VF FLR
of SRIOV sequence is wrong while removing PCI device.
For SRIOV, the guest driver should not trigger the whole XGMI hive
to do the reset. Host driver control how the device been reset.
Fixes: f5c7e77970 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here is the big set of driver core and debug printk changes for 6.1-rc1.
Included in here is:
- dynamic debug updates for the core and the drm subsystem. The
drm changes have all been acked by the relevant maintainers.
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they
were not being used and they really did not actually do
anything.)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BYUA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylozwCdFRlcghaf7XBUyNgRZRwMC+oQI8EAn1G/nEDE
6aFd2er41uK0IGQnSmYO
=OK0k
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
Use DECLARE_DYNDBG_CLASSMAP across DRM:
- in .c files, since macro defines/initializes a record
- in drivers, $mod_{drv,drm,param}.c
ie where param setup is done, since a classmap is param related
- in drm/drm_print.c
since existing __drm_debug param is defined there,
and we ifdef it, and provide an elaborated alternative.
- in drm_*_helper modules:
dp/drm_dp - 1st item in makefile target
drivers/gpu/drm/drm_crtc_helper.c - random pick iirc.
Since these modules all use identical CLASSMAP declarations (ie: names
and .class_id's) they will all respond together to "class DRM_UT_*"
query-commands:
:#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control
NOTES:
This changes __drm_debug from int to ulong, so BIT() is usable on it.
DRM's enum drm_debug_category values need to sync with the index of
their respective class-names here. Then .class_id == category, and
dyndbg's class FOO mechanisms will enable drm_dbg(DRM_UT_KMS, ...).
Though DRM needs consistent categories across all modules, thats not
generally needed; modules X and Y could define FOO differently (ie a
different NAME => class_id mapping), changes are made according to
each module's private class-map.
No callsites are actually selected by this patch, since none are
class'd yet.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since that has now landed bump the minor to let userspace know about it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V3:
Fixed psp fence and memory issues for the asic
using smu v13_0_2 when removing amdgpu device.
[Why]:
1. psp_suspend->psp_free_shared_bufs->
psp_ta_free_shared_buf->
amdgpu_bo_free_kernel->
...->amdgpu_bo_release_notify->
amdgpu_fill_buffer
psp will free vram memory used by psp when psp_suspend
is called. But for the asic using smu v13_0_2, because
psp_suspend is called before adev->shutdown is set to
true when removing the first hive device, amdgpu fill_buffer
will be called, which will cause fence issues when evicting
all vram resources in amdgpu vram mgr_fini.
2. Since psp_hw_fini is not called after calling psp_suspend
and psp_suspend only calls psp_ring_stop, the psp ring memory
will not be released when amdgpu device is removed.
[How]:
1. Set shutdown to true before calling amdgpu_device_gpu_recover,
then amdgpu_fill_buffer will not be called when psp_suspend is
called.
2. Free psp ring memory in psp_sw_fini.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust removal control flow for smu v13_0_2:
During amdgpu uninstallation, when removing the first
device, the kernel needs to first send a mode1reset message
to all gpu devices. Otherwise, smu initialization will fail
the next time amdgpu is installed.
V2:
1. Update commit comments.
2. Remove the global variable amdgpu_device_remove_cnt
and add a variable to the structure amdgpu_hive_info.
3. Use hive to detect the first removed device instead of
a global variable.
V3:
1. Update commit comments.
2. Split a patch into multiple patches.
3. The current patch does:
a. Add a work mode of AMDGPU_RESET_FOR_DEVICE_REMOVE into
the existing gpu recover path, which make all devices
in hive list only have HW reset but no resume (except
the base IP).
b. Call AMDGPU_RESET_FOR_DEVICE_REMOVE and
AMDGPU_NEED_FULL_RESET mode of amdgpu_device_gpu_recover
in amdgpu_pci_remove when removing the first device in
hive list.
c. When removing the first device, the IP blocks keyword
function call sequence is as follows:
.suspend->mode1reset->.resume(basic ip)->.hw_fini->.early_fini->.sw_fini.
^ |
|-<----------<---------<----|
The first three sequences are because of a call to
amdgpu_device_gpu_recover. The three sequences will be
executed in a loop until all devices in the hive list
are iterated.
The sequences starting from .hw_fini only apply to the
first device. Since .suspend has been called before,
except the resumed phase1 basic ip blocks, all other ip
blocks .hw_fini of current device will do nothing.
d. When removing other devices, the calling sequences is the
same as legacy:
.hw_fini -> .early_fini -> .sw_fini.
Since .suspend has been called when removing the first device,
except the resumed phase1 basic ip blocks, all of other ip
blocks .hw_fini of current device will do nothing.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V1:
The psp_cmd_submit_buf function is called by psp_hw_fini to send
TA unload messages to psp to terminate ras, asd and tmr. But when
amdgpu is uninstalled, drm_dev_unplug is called earlier than
psp_hw_fini in amdgpu_pci_remove, the calling order as follows:
static void amdgpu_pci_remove(struct pci_dev *pdev) {
drm_dev_unplug
......
amdgpu_driver_unload_kms->amdgpu_device_fini_hw->...
->.hw_fini->psp_hw_fini->...
->psp_ta_unload->psp_cmd_submit_buf
......
}
The program will return when calling drm_dev_enter in psp_cmd_submit_buf.
So the call to drm_dev_enter in psp_cmd_submit_buf should be
removed, so that the TA unload messages can be sent to the psp
when amdgpu is uninstalled.
V2:
1. Restore psp_cmd_submit_buf to its original code.
2. Move drm_dev_unplug call after amdgpu_driver_unload_kms in
amdgpu_pci_remove.
3. Since amdgpu_device_fini_hw is called by amdgpu_driver_unload_kms,
remove the unplug check to release device mmio resource in
amdgpu_device_fini_hw before calling drm_dev_unplug.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing pci_disable_device() if amdgpu_device_resume() fails.
Fixes: 8e4d5d43cc ("drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Being able to configure visual confirm at boot or in cmdline is helpful
when debugging.
[How]
Add a module parameter to configure DC visual confirm, which works the
same way as the equivalent debugfs entry.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The double `to' is duplicated in the comment, remove one.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's redundant, as now switching to rpm_mode to indicate
runtime power management mode.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for peer-to-peer communication among AMD GPUs over PCIe
bus. Support REQUIRES enablement of config HSA_AMD_P2P.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase the minor version number to indicate that the new flags are
available.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An A+A configuration on ASUS ROG Strix G513QY proves that the ASIC
reset for handling aborted suspend can't work with s2idle.
This functionality was introduced in commit daf8de0874 ("drm/amdgpu:
always reset the asic in suspend (v2)"). A few other commits have
gone on top of the ASIC reset, but this still doesn't work on the A+A
configuration in s2idle.
Avoid doing the reset on dGPUs specifically when using s2idle.
Fixes: daf8de0874 ("drm/amdgpu: always reset the asic in suspend (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2008
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b95dc06af3.
This workaround is no longer necessary. We have a better workaround
in commit f95af4a923 ("drm/amdgpu: don't runtime suspend if there are displays attached (v3)").
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mes_kiq parameter is used to enable mes kiq pipe.
This module parameter is unneccessary or enabled by default
in final version.
v2: reword commit message.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We normally runtime suspend when there are displays attached if they
are in the DPMS off state, however, if something wakes the GPU
we send a hotplug event on resume (in case any displays were connected
while the GPU was in suspend) which can cause userspace to light
up the displays again soon after they were turned off.
Prior to
commit 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."),
the driver took a runtime pm reference when the fbdev emulation was
enabled because we didn't implement proper shadowing support for
vram access when the device was off so the device never runtime
suspended when there was a console bound. Once that commit landed,
we now utilize the core fb helper implementation which properly
handles the emulation, so runtime pm now suspends in cases where it did
not before. Ultimately, we need to sort out why runtime suspend in not
working in this case for some users, but this should restore similar
behavior to before.
v2: move check into runtime_suspend
v3: wake ups -> wakeups in comment, retain pm_runtime behavior in
runtime_idle callback
Fixes: 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/
Tested-by: Michele Ballabio <ballabio.m@gmail.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With this, we can support more CG flags.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DP/HDMI audio on AMD PRO VII stops working after S3:
[ 149.450391] amdgpu 0000:63:00.0: amdgpu: MODE1 reset
[ 149.450395] amdgpu 0000:63:00.0: amdgpu: GPU mode1 reset
[ 149.450494] amdgpu 0000:63:00.0: amdgpu: GPU psp mode1 reset
[ 149.983693] snd_hda_intel 0000:63:00.1: refused to change power state from D0 to D3hot
[ 150.003439] amdgpu 0000:63:00.0: refused to change power state from D0 to D3hot
...
[ 155.432975] snd_hda_intel 0000:63:00.1: CORB reset timeout#2, CORBRP = 65535
The offending commit is daf8de0874 ("drm/amdgpu: always reset the asic in
suspend (v2)"). Commit 34452ac303 ("drm/amdgpu: don't use BACO for
reset in S3 ") doesn't help, so the issue is something different.
Assuming that to make HDA resume to D0 fully realized, it needs to be
successfully put to D3 first. And this guesswork proves working, by
moving amdgpu_asic_reset() to noirq callback, so it's called after HDA
function is in D3.
Fixes: daf8de0874 ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compute-only GPUs have more than 8 VMIDs allocated to KFD. Fix
this by passing correct number of VMIDs to HWS
v2: squash in warning fix (Alex)
Signed-off-by: Tushar Patel <tushar.patel@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vcn fwlog is for debugging purpose only,
by default, it is disabled.
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow to enable the tests only after latest fix
after which the tests passed on my system.
I tested on NV21 standalone and Vega 10 and Polaris as
pair with DRI_PRIME.
It's possible there might be still issues on ASICs i don't
have at my posession but that that the point of enbling
the tests finally - if other people during testing will
encounter errors they will report and I will be able to fix.
The releated merge request for enabling libdrm tests suite is in
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/227
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
