The qpl_cfg struct was used to make sure that no two different queues
are using QPL with the same qpl_id. We can remove that qpl_cfg struct
since now the qpl_ids map with the queues respectively as follows:
For tx queues: qpl_id = tx_qid
For rx queues: qpl_id = max_tx_queues + rx_qid
And when XDP is used, it will need the user to reduce the tx queues to
be at most half of the max_tx_queues. Then it will use the same number
of tx queues starting from the end of existing tx queues for XDP. So the
XDP queues will not exceed the max_tx_queues range and will not overlap
with the rx queues, where the qpl_ids will not have overlapping too.
Considering of that, we remove the qpl_cfg struct to get the qpl_id
directly based on the queue id. Unless we are erroneously allocating a
rx/tx queue that has already been allocated, we would never allocate
the qpl with the same qpl_id twice. In that case, it should fail much
earlier than the QPL assignment.
Suggested-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/r/20240417205757.778551-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new driver for the PD692x0 I2C Power Sourcing Equipment controller.
This driver only support i2c communication for now.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-12-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate the regulator framework to the PSE framework for enhanced
access to features such as voltage, power measurement, and limits, which
are akin to regulators. Additionally, PSE features like port priorities
could potentially enhance the regulator framework. Note that this
integration introduces some implementation complexity, including wrapper
callbacks, but the potential benefits make it worthwhile.
Regulator are using enable counter with specific behavior.
Two calls to regulator_disable will trigger kernel warnings.
If the counter exceeds one, regulator_disable call won't disable the
PSE PI. These behavior isn't suitable for PSE control.
Added a boolean 'enabled' state to prevent multiple calls to
regulator_enable/disable. These calls will only be called from PSE
framework as it won't have any regulator children, therefore no mutex are
needed to safeguards this boolean.
regulator_get needs the consumer device pointer. Use PSE as regulator
provider and consumer device until we have RJ45 ports represented in
the Kernel.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-10-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement setup_pi_matrix callback to configure the PSE PI matrix. This
functionality is invoked before registering the PSE and following the core
parsing of the pse_pis devicetree subnode.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-9-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Power Sourcing Equipment Power Interface (PSE PI) plays a pivotal role
in the architecture of Power over Ethernet (PoE) systems. It is essentially
a blueprint that outlines how one or multiple power sources are connected
to the eight-pin modular jack, commonly known as the Ethernet RJ45 port.
This connection scheme is crucial for enabling the delivery of power
alongside data over Ethernet cables.
This patch adds support for getting the PSE controller node through PSE PI
device subnode.
This supports adds a way to get the PSE PI id from the pse_pi devicetree
subnode of a PSE controller node simply by reading the reg property.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-7-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce an enumeration to define PSE types (C33 or PoDL),
utilizing a bitfield for potential future support of both types.
Include 'pse_get_types' helper for external access to PSE type info.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-2-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-17 (ice)
This series contains updates to ice driver only.
Marcin adds Tx malicious driver detection (MDD) events to be included as
part of mdd-auto-reset-vf.
Dariusz removes unnecessary implementation of ndo_get_phys_port_name.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Remove ndo_get_phys_port_name
ice: Add automatic VF reset on Tx MDD events
====================
Link: https://lore.kernel.org/r/20240417165634.2081793-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144413.104257-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144407.104241-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144359.104225-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the check for unsupported control flags, to use the new helper
flow_rule_is_supp_control_flags().
Since the helper was based on sfc, then nothing really changes.
Compile-tested, and compiled objects are identical.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20240417140712.100905-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240417135131.99921-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance
for coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sJzH
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Reported-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the commit d2689b6a86 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.
In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.
Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.
cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a86 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RSS hash report is a feature that's part of the virtio specification.
Currently, virtio backends like qemu, vdpa (mlx5), and potentially vhost
(still a work in progress as per [1]) support this feature. While the
capability to obtain the RSS hash has been enabled in the normal path,
it's currently missing in the XDP path. Therefore, we are introducing
XDP hints through kfuncs to allow XDP programs to access the RSS hash.
1.
https://lore.kernel.org/all/20231015141644.260646-1-akihiko.odaki@daynix.com/#r
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240417071822.27831-1-liangchen.linux@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Establish the rule that header files are always included in sorted
(POSIX local) order. Standard and private headers are separated by
a blank line.
Similarly, sort all forward-declarations for structures.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All of the config data files and all of the register definition
files (plus a few others) use GSI_EE_AP, which is defined in
"ipa_version.h". Include that header where it's needed.
All of the IPA register definition files include "../ipa.h", though
none of them need anything defined there. Similarly, all of the GSI
register definition files include "../gsi.h", but don't need anything
defined there. Remove these unnneded includes.
All of the configuration data files include "../gsi.h", though none
of them need anything defined there, so remove these includes.
Remove other includes of local header files that are not required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As definitions in headers have been moved around, some of the
struct and enum declarations found in header files have become
no longer necessary and can be removed. Remove these unneeded
declarations.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Declare some structure types in a few header files where functions
declared therein use them:
- Functions are declared in "gsi_private.h" that use gsi, gsi_ring, and
gsi_trans structure pointers.
- A gsi_trans struct pointer is passed to two functions
declared in "ipa_endpoint.h"
- In "ipa_interrupt.h", a platform_device pointer is passed in the
declaration for ipa_interrupt_init().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The IPA structure contains an ipa_interrupt structure pointer, and
that structure is declared in "ipa.h". There is no need to include
"ipa_interrupt.h" in that header file.
Instead, include "ipa_interrupt.h" in the three source files (in
addition to "ipa_main.c") that actually use the functions that are
declared there.
Similarly, three files use symbols defined in "ipa_reg.h" but do not
include that file; include it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some IPA header files include one or more other standard header
files despite not directly needing anything defined in the included
files. Remove these unnecessary includes.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some IPA header files use types defined in <linux/types.h>, but do
not include that file:
- In "ipa_mem.h", the ipa_mem structure has u16 and u32 fields
- In "ipa_power.h", ipa_power_retention() takes a bool argument,
and ipa_core_clock_rate() returns u32
- In "ipa_version.h", ipa_version_supported() returns bool
Include it in these files to satisfy their dependencies.
The ipa_qmi structure (defined in "ipa_qmi.h") contains a work
structure, so include <linux/workqueue.h> in there.
All of the data and register definition files, as well as "reg.h",
use the ARRAY_SIZE() macro. Include <linux/array_size.h> everywhere
it's used.
Similarly, all register definition files (and a few others) use the
GENMASK() macro, so include <linux/bits.h> to ensure it's defined
where used. BIT() becomes available by including this file also.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ibmvnic_xmit() if ibmvnic_tx_scrq_flush() returns H_CLOSED then
it will inform upper level networking functions to disable tx
queues. H_CLOSED signals that the connection with the vnic server is
down and a transport event is expected to recover the device.
Previously, ibmvnic_tx_scrq_flush() was hard-coded to return success.
Therefore, the queues would remain active until ibmvnic_cleanup() is
called within do_reset().
The problem is that do_reset() depends on the RTNL lock. If several
ibmvnic devices are resetting then there can be a long wait time until
the last device can grab the lock. During this time the tx/rx queues
still appear active to upper level functions.
FYI, we do make a call to netif_carrier_off() outside the RTNL lock but
its calls to dev_deactivate() are also dependent on the RTNL lock.
As a result, large amounts of retransmissions were observed in a short
period of time, eventually leading to ETIMEOUT. This was specifically
seen with HNV devices, likely because of even more RTNL dependencies.
Therefore, ensure the return code of ibmvnic_tx_scrq_flush() is
propagated to the xmit function to allow for an earlier (and lock-less)
response to a transport event.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416164128.387920-1-nnac123@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX byte accounting for jumbo packets was changed to fix a potential
use-after-free bug. However, that fix used the wrong variable and so
only accounted for the number of bytes in the final descriptor, not the
number of bytes in the whole packet.
To fix this, we can simply update our stats with the correct number of
bytes before calling napi_gro_receive().
Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future
confusion. The variable name pkt_len is correct in ravb_rx_rcar() as
that function does not handle packets spanning multiple descriptors.
Fixes: 5a5a3e564d ("ravb: Fix potential use-after-free in ravb_rx_gbeth()")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following
backtrace:
WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
pc : skb_trim+0x30/0x38
lr : ravb_rx_csum_gbeth+0x40/0x90
Call trace:
skb_trim+0x30/0x38
ravb_rx_gbeth+0x56c/0x5cc
ravb_poll+0xa0/0x204
__napi_poll+0x38/0x17c
This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
wrong skb for a packet which spans multiple descriptors. To fix this,
use the correct skb.
Fixes: c2da940857 ("ravb: Add Rx checksum offload support for GbEth")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop
iteration if a zero-length descriptor is seen (indicating a DMA mapping
error). However, the current RX descriptor index `priv->cur_rx[q]` was
incremented at the end of the loop and so would not be incremented when
we skip to the next loop iteration. This would cause the loop to keep
seeing the same zero-length descriptor instead of moving on to the next
descriptor.
As the loop counter `i` still increments, the loop would eventually
terminate so there is no risk of being stuck here forever - but we
should still fix this to avoid wasting cycles.
To fix this, the RX descriptor index is incremented at the top of the
loop, in the for statement itself. The assignments of `entry` and `desc`
are brought into the loop to avoid the need for duplication.
Fixes: d8b48911fd ("ravb: fix ring memory allocation")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The units of "work done" in the RX path should be packets instead of
descriptors.
Descriptors which are used by the hardware to record error conditions or
are empty in the case of a DMA mapping error should not count towards
our RX work budget.
Also make the limit variable unsigned as it can never be negative.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The WLAN + WED reset sequence relies on being able to receive interrupts from
the card, in order to synchronize individual steps with the firmware.
When WED is stopped, leave interrupts running and rely on the driver turning
off unwanted ones.
WED DMA also needs to be disabled before resetting.
Fixes: f78cd9c783 ("net: ethernet: mtk_wed: update mtk_wed_stop")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-16 (ice)
This series contains updates to ice driver only.
Michal fixes a couple of issues with TC filter parsing; always add match
for src_vsi and remove flag check that could prevent addition of valid
filters.
Marcin adds additional checks for unsupported flower filters.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
====================
Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert xrs700x to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide stubs for
the mac_link_down() and mac_config() methods which are mandatory.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rwfu8-007531-TG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rzn1_a5psw to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide a stub for
the mac_config() method which is mandatory.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rwfuJ-00753D-6d@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert lan9303 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide stubs for
the mac_link_down() and mac_config() methods which are mandatory.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rwfuE-007537-1u@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert bcm_sf2 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rwfu3-00752s-On@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ndo_get_phys_port_name is never actually used, as in switchdev
devlink is always being created.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Dariusz Aftanski <dariusz.aftanski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In cases when VF sends malformed packets that are classified as malicious,
it can cause Tx queue to freeze as a result of Malicious Driver Detection
event. Such malformed packets can appear as a result of a faulty userspace
app running on VF. This frozen queue can be stuck for several minutes being
unusable.
User might prefer to immediately bring the VF back to operational state
after such event, which can be done by automatically resetting the VF which
caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf
flag private flag needs to be set).
Extend the VF auto reset to also cover Tx MDD events. When any MDD event
occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set,
perform a graceful VF reset to quickly bring it back to operational state.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Liang-Min Wang <liang-min.wang@intel.com>
Signed-off-by: Liang-Min Wang <liang-min.wang@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The mediatek-ge PHY driver already disables EEE advertisement on the switch
PHYs but my testing [1] shows that it is somehow enabled afterwards.
Disabling EEE advertisement before the PHY driver initialises keeps it off.
Therefore, remove disabling EEE advertisement here as it's useless.
Link: https://lore.kernel.org/netdev/d286ea27-e911-4dcb-9037-b75f22b437b8@arinc9.com/ [1]
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.
Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.
Fixes: 110c18bfed ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076 ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 18ff0bcda6 ("ethtool: add interface to interact with Ethernet
Power Equipment"), the 'pse_control_config' structure was introduced,
housing a single member labeled 'admin_cotrol' responsible for maintaining
the operational state of the PoDL PSE functions.
A noticeable typographical error exists in the naming of this field
('cotrol' should be corrected to 'control'), which this commit aims to
rectify.
Furthermore, with upcoming extensions of this structure to encompass PoE
functionalities, the field is being renamed to 'podl_admin_state' to
distinctly indicate that this state is tailored specifically for PoDL."
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-3-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The print function dev_err() is redundant because
platform_get_irq_byname() already prints an error.
./drivers/net/ipa/ipa_interrupt.c:300:2-9: line 300 is redundant because platform_get_irq() already prints an error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8756
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240415031456.10805-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.
net_ratelimit mechanism can be used to limit the dumping rate.
PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980"
#0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
[exception RIP: io_serial_in+20]
RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002
RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000
RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0
RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f
R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020
R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
#12 [ffffa65531497b68] printk at ffffffff89318306
#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
#18 [ffffa65531497f10] kthread at ffffffff892d2e72
#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f
Fixes: ef3db4a595 ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154929.127045-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
Fixes: 9e300987d4 ("ice: VXLAN and Geneve TC support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
Fixes: 9a225f81f5 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
