Simplify the calling convention of these functions since the
xfs_rtalloc_args structure contains the parameters we need.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that xfs_rtalloc_args holds references to the last-read bitmap and
summary blocks, we don't need to pass the buffer pointer out of
xfs_rtbuf_get.
Callers no longer have to xfs_trans_brelse on their own, though they are
required to call xfs_rtbuf_cache_relse before the xfs_rtalloc_args goes
out of scope.
While we're at it, create some trivial helpers so that we don't have to
remember if "0" means "bitmap" and "1" means "summary".
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Profiling a workload on a highly fragmented realtime device showed a ton
of CPU cycles being spent in xfs_trans_read_buf() called by
xfs_rtbuf_get(). Further tracing showed that much of that was repeated
calls to xfs_rtbuf_get() for the same block of the realtime bitmap.
These come from xfs_rtallocate_extent_block(): as it walks through
ranges of free bits in the bitmap, each call to xfs_rtcheck_range() and
xfs_rtfind_{forw,back}() gets the same bitmap block. If the bitmap block
is very fragmented, then this is _a lot_ of buffer lookups.
The realtime allocator already passes around a cache of the last used
realtime summary block to avoid repeated reads (the parameters rbpp and
rsb). We can do the same for the realtime bitmap.
This replaces rbpp and rsb with a struct xfs_rtbuf_cache, which caches
the most recently used block for both the realtime bitmap and summary.
xfs_rtbuf_get() now handles the caching instead of the callers, which
requires plumbing xfs_rtbuf_cache to more functions but also makes sure
we don't miss anything.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Consolidate the arguments passed around the rt allocator into a
struct xfs_rtalloc_arg similar to how the btree allocator arguments
are consolidated in a struct xfs_alloc_arg....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create get and set functions for rtsummary words so that we can redefine
the ondisk format with a specific endianness. Note that this requires
the definition of a distinct type for ondisk summary info words so that
the compiler can perform proper typechecking.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create helper functions that compute the number of blocks or words
necessary to store the rt summary file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create get and set functions for rtbitmap words so that we can redefine
the ondisk format with a specific endianness. Note that this requires
the definition of a distinct type for ondisk rtbitmap words so that the
compiler can perform proper typechecking as we go back and forth.
In the upcoming rtgroups feature, we're going to fix the problem that
rtwords are written in host endian order, which means we'll need the
distinct rtword/rtword_raw types.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create helper functions that compute the number of blocks or words
necessary to store the rt bitmap.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert the realtime summary file macros to helper functions so that we
can improve type checking.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are a bunch of places where we use open-coded logic to find a
pointer to an xfs_rtword_t within a rt bitmap buffer. Convert all that
to helper functions for better type safety.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove these trivial macros since they're not even part of the ondisk
format.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Replace these macros with typechecked helper functions. Eventually
we're going to add more logic to the helpers and it'll be easier if we
don't have to macro it up.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Avoid the costs of integer division (32-bit and 64-bit) if the realtime
extent size is a power of two.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a pair of functions to round rtblock numbers up or down to the
nearest rt extent.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert these calls to use the helpers, and clean up all these places
where the same variable can have different units depending on where it
is in the function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create helpers to do unit conversions of rt block numbers to rt extent
numbers. There are three variations -- one to compute the rt extent
number from an rt block number; one to compute the offset of an rt block
within an rt extent; and one to extract both.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper to compute the realtime extent (xfs_rtxlen_t) from an
extent length (xfs_extlen_t) value.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper to compute the misalignment between a file extent
(xfs_extlen_t) and a realtime extent.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper to convert a realtime extent to a realtime block. Later
on we'll change the helper to use bit shifts when possible.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Further disambiguate the xfs_rtblock_t uses by creating a new type,
xfs_rtxnum_t, to store the position of an extent within the realtime
section, in units of rtextents.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
XFS uses xfs_rtblock_t for many different uses, which makes it much more
difficult to perform a unit analysis on the codebase. One of these
(ab)uses is when we need to store the length of a free space extent as
stored in the realtime bitmap. Because there can be up to 2^64 realtime
extents in a filesystem, we need a new type that is larger than
xfs_rtxlen_t for callers that are querying the bitmap directly. This
means scrub and growfs.
Create this type as "xfs_rtbxlen_t" and use it to store 64-bit rtx
lengths. 'b' stands for 'bitmap' or 'big'; reader's choice.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We should use xfs_fileoff_t to store the file block offset of any
location within the realtime bitmap or summary files.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In most of the filesystem, we use xfs_extlen_t to store the length of a
file (or AG) space mapping in units of fs blocks. Unfortunately, the
realtime allocator also uses it to store the length of a rt space
mapping in units of rt extents. This is confusing, since one rt extent
can consist of many fs blocks.
Separate the two by introducing a new type (xfs_rtxlen_t) to store the
length of a space mapping (in units of realtime extents) that would be
found in a file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move all the declarations for functionality in xfs_rtbitmap.c into a
separate xfs_rtbitmap.h header file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
