1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
linux/mm/swap.c
Jens Axboe 8026e49bff mm/filemap: add read support for RWF_DONTCACHE
Add RWF_DONTCACHE as a read operation flag, which means that any data read
wil be removed from the page cache upon completion.  Uses the page cache
to synchronize, and simply prunes folios that were instantiated when the
operation completes.  While it would be possible to use private pages for
this, using the page cache as synchronization is handy for a variety of
reasons:

1) No special truncate magic is needed
2) Async buffered reads need some place to serialize, using the page
   cache is a lot easier than writing extra code for this
3) The pruning cost is pretty reasonable

and the code to support this is much simpler as a result.

You can think of uncached buffered IO as being the much more attractive
cousin of O_DIRECT - it has none of the restrictions of O_DIRECT.  Yes, it
will copy the data, but unlike regular buffered IO, it doesn't run into
the unpredictability of the page cache in terms of reclaim.  As an
example, on a test box with 32 drives, reading them with buffered IO looks
as follows:

Reading bs 65536, uncached 0
  1s: 145945MB/sec
  2s: 158067MB/sec
  3s: 157007MB/sec
  4s: 148622MB/sec
  5s: 118824MB/sec
  6s: 70494MB/sec
  7s: 41754MB/sec
  8s: 90811MB/sec
  9s: 92204MB/sec
 10s: 95178MB/sec
 11s: 95488MB/sec
 12s: 95552MB/sec
 13s: 96275MB/sec

where it's quite easy to see where the page cache filled up, and
performance went from good to erratic, and finally settles at a much
lower rate. Looking at top while this is ongoing, we see:

 PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
7535 root      20   0  267004      0      0 S  3199   0.0   8:40.65 uncached
3326 root      20   0       0      0      0 R 100.0   0.0   0:16.40 kswapd4
3327 root      20   0       0      0      0 R 100.0   0.0   0:17.22 kswapd5
3328 root      20   0       0      0      0 R 100.0   0.0   0:13.29 kswapd6
3332 root      20   0       0      0      0 R 100.0   0.0   0:11.11 kswapd10
3339 root      20   0       0      0      0 R 100.0   0.0   0:16.25 kswapd17
3348 root      20   0       0      0      0 R 100.0   0.0   0:16.40 kswapd26
3343 root      20   0       0      0      0 R 100.0   0.0   0:16.30 kswapd21
3344 root      20   0       0      0      0 R 100.0   0.0   0:11.92 kswapd22
3349 root      20   0       0      0      0 R 100.0   0.0   0:16.28 kswapd27
3352 root      20   0       0      0      0 R  99.7   0.0   0:11.89 kswapd30
3353 root      20   0       0      0      0 R  96.7   0.0   0:16.04 kswapd31
3329 root      20   0       0      0      0 R  96.4   0.0   0:11.41 kswapd7
3345 root      20   0       0      0      0 R  96.4   0.0   0:13.40 kswapd23
3330 root      20   0       0      0      0 S  91.1   0.0   0:08.28 kswapd8
3350 root      20   0       0      0      0 S  86.8   0.0   0:11.13 kswapd28
3325 root      20   0       0      0      0 S  76.3   0.0   0:07.43 kswapd3
3341 root      20   0       0      0      0 S  74.7   0.0   0:08.85 kswapd19
3334 root      20   0       0      0      0 S  71.7   0.0   0:10.04 kswapd12
3351 root      20   0       0      0      0 R  60.5   0.0   0:09.59 kswapd29
3323 root      20   0       0      0      0 R  57.6   0.0   0:11.50 kswapd1
[...]

which is just showing a partial list of the 32 kswapd threads that are
running mostly full tilt, burning ~28 full CPU cores.

If the same test case is run with RWF_DONTCACHE set for the buffered read,
the output looks as follows:

Reading bs 65536, uncached 0
  1s: 153144MB/sec
  2s: 156760MB/sec
  3s: 158110MB/sec
  4s: 158009MB/sec
  5s: 158043MB/sec
  6s: 157638MB/sec
  7s: 157999MB/sec
  8s: 158024MB/sec
  9s: 157764MB/sec
 10s: 157477MB/sec
 11s: 157417MB/sec
 12s: 157455MB/sec
 13s: 157233MB/sec
 14s: 156692MB/sec

which is just chugging along at ~155GB/sec of read performance. Looking
at top, we see:

 PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
7961 root      20   0  267004      0      0 S  3180   0.0   5:37.95 uncached
8024 axboe     20   0   14292   4096      0 R   1.0   0.0   0:00.13 top

where just the test app is using CPU, no reclaim is taking place outside
of the main thread.  Not only is performance 65% better, it's also using
half the CPU to do it.

Link: https://lkml.kernel.org/r/20241220154831.1086649-9-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-25 20:22:43 -08:00

1095 lines
30 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/mm/swap.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*/
/*
* This file contains the default values for the operation of the
* Linux VM subsystem. Fine-tuning documentation can be found in
* Documentation/admin-guide/sysctl/vm.rst.
* Started 18.12.91
* Swap aging added 23.2.95, Stephen Tweedie.
* Buffermem limits added 12.3.98, Rik van Riel.
*/
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/swap.h>
#include <linux/mman.h>
#include <linux/pagemap.h>
#include <linux/pagevec.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/mm_inline.h>
#include <linux/percpu_counter.h>
#include <linux/memremap.h>
#include <linux/percpu.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/backing-dev.h>
#include <linux/memcontrol.h>
#include <linux/gfp.h>
#include <linux/uio.h>
#include <linux/hugetlb.h>
#include <linux/page_idle.h>
#include <linux/local_lock.h>
#include <linux/buffer_head.h>
#include "internal.h"
#define CREATE_TRACE_POINTS
#include <trace/events/pagemap.h>
/* How many pages do we try to swap or page in/out together? As a power of 2 */
int page_cluster;
const int page_cluster_max = 31;
struct cpu_fbatches {
/*
* The following folio batches are grouped together because they are protected
* by disabling preemption (and interrupts remain enabled).
*/
local_lock_t lock;
struct folio_batch lru_add;
struct folio_batch lru_deactivate_file;
struct folio_batch lru_deactivate;
struct folio_batch lru_lazyfree;
#ifdef CONFIG_SMP
struct folio_batch lru_activate;
#endif
/* Protecting the following batches which require disabling interrupts */
local_lock_t lock_irq;
struct folio_batch lru_move_tail;
};
static DEFINE_PER_CPU(struct cpu_fbatches, cpu_fbatches) = {
.lock = INIT_LOCAL_LOCK(lock),
.lock_irq = INIT_LOCAL_LOCK(lock_irq),
};
static void __page_cache_release(struct folio *folio, struct lruvec **lruvecp,
unsigned long *flagsp)
{
if (folio_test_lru(folio)) {
folio_lruvec_relock_irqsave(folio, lruvecp, flagsp);
lruvec_del_folio(*lruvecp, folio);
__folio_clear_lru_flags(folio);
}
}
/*
* This path almost never happens for VM activity - pages are normally freed
* in batches. But it gets used by networking - and for compound pages.
*/
static void page_cache_release(struct folio *folio)
{
struct lruvec *lruvec = NULL;
unsigned long flags;
__page_cache_release(folio, &lruvec, &flags);
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
}
void __folio_put(struct folio *folio)
{
if (unlikely(folio_is_zone_device(folio))) {
free_zone_device_folio(folio);
return;
}
if (folio_test_hugetlb(folio)) {
free_huge_folio(folio);
return;
}
page_cache_release(folio);
folio_unqueue_deferred_split(folio);
mem_cgroup_uncharge(folio);
free_frozen_pages(&folio->page, folio_order(folio));
}
EXPORT_SYMBOL(__folio_put);
typedef void (*move_fn_t)(struct lruvec *lruvec, struct folio *folio);
static void lru_add(struct lruvec *lruvec, struct folio *folio)
{
int was_unevictable = folio_test_clear_unevictable(folio);
long nr_pages = folio_nr_pages(folio);
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
/*
* Is an smp_mb__after_atomic() still required here, before
* folio_evictable() tests the mlocked flag, to rule out the possibility
* of stranding an evictable folio on an unevictable LRU? I think
* not, because __munlock_folio() only clears the mlocked flag
* while the LRU lock is held.
*
* (That is not true of __page_cache_release(), and not necessarily
* true of folios_put(): but those only clear the mlocked flag after
* folio_put_testzero() has excluded any other users of the folio.)
*/
if (folio_evictable(folio)) {
if (was_unevictable)
__count_vm_events(UNEVICTABLE_PGRESCUED, nr_pages);
} else {
folio_clear_active(folio);
folio_set_unevictable(folio);
/*
* folio->mlock_count = !!folio_test_mlocked(folio)?
* But that leaves __mlock_folio() in doubt whether another
* actor has already counted the mlock or not. Err on the
* safe side, underestimate, let page reclaim fix it, rather
* than leaving a page on the unevictable LRU indefinitely.
*/
folio->mlock_count = 0;
if (!was_unevictable)
__count_vm_events(UNEVICTABLE_PGCULLED, nr_pages);
}
lruvec_add_folio(lruvec, folio);
trace_mm_lru_insertion(folio);
}
static void folio_batch_move_lru(struct folio_batch *fbatch, move_fn_t move_fn)
{
int i;
struct lruvec *lruvec = NULL;
unsigned long flags = 0;
for (i = 0; i < folio_batch_count(fbatch); i++) {
struct folio *folio = fbatch->folios[i];
folio_lruvec_relock_irqsave(folio, &lruvec, &flags);
move_fn(lruvec, folio);
folio_set_lru(folio);
}
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
folios_put(fbatch);
}
static void __folio_batch_add_and_move(struct folio_batch __percpu *fbatch,
struct folio *folio, move_fn_t move_fn,
bool on_lru, bool disable_irq)
{
unsigned long flags;
if (on_lru && !folio_test_clear_lru(folio))
return;
folio_get(folio);
if (disable_irq)
local_lock_irqsave(&cpu_fbatches.lock_irq, flags);
else
local_lock(&cpu_fbatches.lock);
if (!folio_batch_add(this_cpu_ptr(fbatch), folio) || folio_test_large(folio) ||
lru_cache_disabled())
folio_batch_move_lru(this_cpu_ptr(fbatch), move_fn);
if (disable_irq)
local_unlock_irqrestore(&cpu_fbatches.lock_irq, flags);
else
local_unlock(&cpu_fbatches.lock);
}
#define folio_batch_add_and_move(folio, op, on_lru) \
__folio_batch_add_and_move( \
&cpu_fbatches.op, \
folio, \
op, \
on_lru, \
offsetof(struct cpu_fbatches, op) >= offsetof(struct cpu_fbatches, lock_irq) \
)
static void lru_move_tail(struct lruvec *lruvec, struct folio *folio)
{
if (folio_test_unevictable(folio))
return;
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
lruvec_add_folio_tail(lruvec, folio);
__count_vm_events(PGROTATED, folio_nr_pages(folio));
}
/*
* Writeback is about to end against a folio which has been marked for
* immediate reclaim. If it still appears to be reclaimable, move it
* to the tail of the inactive list.
*
* folio_rotate_reclaimable() must disable IRQs, to prevent nasty races.
*/
void folio_rotate_reclaimable(struct folio *folio)
{
if (folio_test_locked(folio) || folio_test_dirty(folio) ||
folio_test_unevictable(folio))
return;
folio_batch_add_and_move(folio, lru_move_tail, true);
}
void lru_note_cost(struct lruvec *lruvec, bool file,
unsigned int nr_io, unsigned int nr_rotated)
{
unsigned long cost;
/*
* Reflect the relative cost of incurring IO and spending CPU
* time on rotations. This doesn't attempt to make a precise
* comparison, it just says: if reloads are about comparable
* between the LRU lists, or rotations are overwhelmingly
* different between them, adjust scan balance for CPU work.
*/
cost = nr_io * SWAP_CLUSTER_MAX + nr_rotated;
do {
unsigned long lrusize;
/*
* Hold lruvec->lru_lock is safe here, since
* 1) The pinned lruvec in reclaim, or
* 2) From a pre-LRU page during refault (which also holds the
* rcu lock, so would be safe even if the page was on the LRU
* and could move simultaneously to a new lruvec).
*/
spin_lock_irq(&lruvec->lru_lock);
/* Record cost event */
if (file)
lruvec->file_cost += cost;
else
lruvec->anon_cost += cost;
/*
* Decay previous events
*
* Because workloads change over time (and to avoid
* overflow) we keep these statistics as a floating
* average, which ends up weighing recent refaults
* more than old ones.
*/
lrusize = lruvec_page_state(lruvec, NR_INACTIVE_ANON) +
lruvec_page_state(lruvec, NR_ACTIVE_ANON) +
lruvec_page_state(lruvec, NR_INACTIVE_FILE) +
lruvec_page_state(lruvec, NR_ACTIVE_FILE);
if (lruvec->file_cost + lruvec->anon_cost > lrusize / 4) {
lruvec->file_cost /= 2;
lruvec->anon_cost /= 2;
}
spin_unlock_irq(&lruvec->lru_lock);
} while ((lruvec = parent_lruvec(lruvec)));
}
void lru_note_cost_refault(struct folio *folio)
{
lru_note_cost(folio_lruvec(folio), folio_is_file_lru(folio),
folio_nr_pages(folio), 0);
}
static void lru_activate(struct lruvec *lruvec, struct folio *folio)
{
long nr_pages = folio_nr_pages(folio);
if (folio_test_active(folio) || folio_test_unevictable(folio))
return;
lruvec_del_folio(lruvec, folio);
folio_set_active(folio);
lruvec_add_folio(lruvec, folio);
trace_mm_lru_activate(folio);
__count_vm_events(PGACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGACTIVATE, nr_pages);
}
#ifdef CONFIG_SMP
static void folio_activate_drain(int cpu)
{
struct folio_batch *fbatch = &per_cpu(cpu_fbatches.lru_activate, cpu);
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_activate);
}
void folio_activate(struct folio *folio)
{
if (folio_test_active(folio) || folio_test_unevictable(folio))
return;
folio_batch_add_and_move(folio, lru_activate, true);
}
#else
static inline void folio_activate_drain(int cpu)
{
}
void folio_activate(struct folio *folio)
{
struct lruvec *lruvec;
if (!folio_test_clear_lru(folio))
return;
lruvec = folio_lruvec_lock_irq(folio);
lru_activate(lruvec, folio);
unlock_page_lruvec_irq(lruvec);
folio_set_lru(folio);
}
#endif
static void __lru_cache_activate_folio(struct folio *folio)
{
struct folio_batch *fbatch;
int i;
local_lock(&cpu_fbatches.lock);
fbatch = this_cpu_ptr(&cpu_fbatches.lru_add);
/*
* Search backwards on the optimistic assumption that the folio being
* activated has just been added to this batch. Note that only
* the local batch is examined as a !LRU folio could be in the
* process of being released, reclaimed, migrated or on a remote
* batch that is currently being drained. Furthermore, marking
* a remote batch's folio active potentially hits a race where
* a folio is marked active just after it is added to the inactive
* list causing accounting errors and BUG_ON checks to trigger.
*/
for (i = folio_batch_count(fbatch) - 1; i >= 0; i--) {
struct folio *batch_folio = fbatch->folios[i];
if (batch_folio == folio) {
folio_set_active(folio);
break;
}
}
local_unlock(&cpu_fbatches.lock);
}
#ifdef CONFIG_LRU_GEN
static void lru_gen_inc_refs(struct folio *folio)
{
unsigned long new_flags, old_flags = READ_ONCE(folio->flags);
if (folio_test_unevictable(folio))
return;
/* see the comment on LRU_REFS_FLAGS */
if (!folio_test_referenced(folio)) {
set_mask_bits(&folio->flags, LRU_REFS_MASK, BIT(PG_referenced));
return;
}
do {
if ((old_flags & LRU_REFS_MASK) == LRU_REFS_MASK) {
if (!folio_test_workingset(folio))
folio_set_workingset(folio);
return;
}
new_flags = old_flags + BIT(LRU_REFS_PGOFF);
} while (!try_cmpxchg(&folio->flags, &old_flags, new_flags));
}
static bool lru_gen_clear_refs(struct folio *folio)
{
struct lru_gen_folio *lrugen;
int gen = folio_lru_gen(folio);
int type = folio_is_file_lru(folio);
if (gen < 0)
return true;
set_mask_bits(&folio->flags, LRU_REFS_FLAGS | BIT(PG_workingset), 0);
lrugen = &folio_lruvec(folio)->lrugen;
/* whether can do without shuffling under the LRU lock */
return gen == lru_gen_from_seq(READ_ONCE(lrugen->min_seq[type]));
}
#else /* !CONFIG_LRU_GEN */
static void lru_gen_inc_refs(struct folio *folio)
{
}
static bool lru_gen_clear_refs(struct folio *folio)
{
return false;
}
#endif /* CONFIG_LRU_GEN */
/**
* folio_mark_accessed - Mark a folio as having seen activity.
* @folio: The folio to mark.
*
* This function will perform one of the following transitions:
*
* * inactive,unreferenced -> inactive,referenced
* * inactive,referenced -> active,unreferenced
* * active,unreferenced -> active,referenced
*
* When a newly allocated folio is not yet visible, so safe for non-atomic ops,
* __folio_set_referenced() may be substituted for folio_mark_accessed().
*/
void folio_mark_accessed(struct folio *folio)
{
if (folio_test_dropbehind(folio))
return;
if (lru_gen_enabled()) {
lru_gen_inc_refs(folio);
return;
}
if (!folio_test_referenced(folio)) {
folio_set_referenced(folio);
} else if (folio_test_unevictable(folio)) {
/*
* Unevictable pages are on the "LRU_UNEVICTABLE" list. But,
* this list is never rotated or maintained, so marking an
* unevictable page accessed has no effect.
*/
} else if (!folio_test_active(folio)) {
/*
* If the folio is on the LRU, queue it for activation via
* cpu_fbatches.lru_activate. Otherwise, assume the folio is in a
* folio_batch, mark it active and it'll be moved to the active
* LRU on the next drain.
*/
if (folio_test_lru(folio))
folio_activate(folio);
else
__lru_cache_activate_folio(folio);
folio_clear_referenced(folio);
workingset_activation(folio);
}
if (folio_test_idle(folio))
folio_clear_idle(folio);
}
EXPORT_SYMBOL(folio_mark_accessed);
/**
* folio_add_lru - Add a folio to an LRU list.
* @folio: The folio to be added to the LRU.
*
* Queue the folio for addition to the LRU. The decision on whether
* to add the page to the [in]active [file|anon] list is deferred until the
* folio_batch is drained. This gives a chance for the caller of folio_add_lru()
* have the folio added to the active list using folio_mark_accessed().
*/
void folio_add_lru(struct folio *folio)
{
VM_BUG_ON_FOLIO(folio_test_active(folio) &&
folio_test_unevictable(folio), folio);
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
/* see the comment in lru_gen_folio_seq() */
if (lru_gen_enabled() && !folio_test_unevictable(folio) &&
lru_gen_in_fault() && !(current->flags & PF_MEMALLOC))
folio_set_active(folio);
folio_batch_add_and_move(folio, lru_add, false);
}
EXPORT_SYMBOL(folio_add_lru);
/**
* folio_add_lru_vma() - Add a folio to the appropate LRU list for this VMA.
* @folio: The folio to be added to the LRU.
* @vma: VMA in which the folio is mapped.
*
* If the VMA is mlocked, @folio is added to the unevictable list.
* Otherwise, it is treated the same way as folio_add_lru().
*/
void folio_add_lru_vma(struct folio *folio, struct vm_area_struct *vma)
{
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
if (unlikely((vma->vm_flags & (VM_LOCKED | VM_SPECIAL)) == VM_LOCKED))
mlock_new_folio(folio);
else
folio_add_lru(folio);
}
/*
* If the folio cannot be invalidated, it is moved to the
* inactive list to speed up its reclaim. It is moved to the
* head of the list, rather than the tail, to give the flusher
* threads some time to write it out, as this is much more
* effective than the single-page writeout from reclaim.
*
* If the folio isn't mapped and dirty/writeback, the folio
* could be reclaimed asap using the reclaim flag.
*
* 1. active, mapped folio -> none
* 2. active, dirty/writeback folio -> inactive, head, reclaim
* 3. inactive, mapped folio -> none
* 4. inactive, dirty/writeback folio -> inactive, head, reclaim
* 5. inactive, clean -> inactive, tail
* 6. Others -> none
*
* In 4, it moves to the head of the inactive list so the folio is
* written out by flusher threads as this is much more efficient
* than the single-page writeout from reclaim.
*/
static void lru_deactivate_file(struct lruvec *lruvec, struct folio *folio)
{
bool active = folio_test_active(folio) || lru_gen_enabled();
long nr_pages = folio_nr_pages(folio);
if (folio_test_unevictable(folio))
return;
/* Some processes are using the folio */
if (folio_mapped(folio))
return;
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
folio_clear_referenced(folio);
if (folio_test_writeback(folio) || folio_test_dirty(folio)) {
/*
* Setting the reclaim flag could race with
* folio_end_writeback() and confuse readahead. But the
* race window is _really_ small and it's not a critical
* problem.
*/
lruvec_add_folio(lruvec, folio);
folio_set_reclaim(folio);
} else {
/*
* The folio's writeback ended while it was in the batch.
* We move that folio to the tail of the inactive list.
*/
lruvec_add_folio_tail(lruvec, folio);
__count_vm_events(PGROTATED, nr_pages);
}
if (active) {
__count_vm_events(PGDEACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGDEACTIVATE,
nr_pages);
}
}
static void lru_deactivate(struct lruvec *lruvec, struct folio *folio)
{
long nr_pages = folio_nr_pages(folio);
if (folio_test_unevictable(folio) || !(folio_test_active(folio) || lru_gen_enabled()))
return;
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
folio_clear_referenced(folio);
lruvec_add_folio(lruvec, folio);
__count_vm_events(PGDEACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGDEACTIVATE, nr_pages);
}
static void lru_lazyfree(struct lruvec *lruvec, struct folio *folio)
{
long nr_pages = folio_nr_pages(folio);
if (!folio_test_anon(folio) || !folio_test_swapbacked(folio) ||
folio_test_swapcache(folio) || folio_test_unevictable(folio))
return;
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
if (lru_gen_enabled())
lru_gen_clear_refs(folio);
else
folio_clear_referenced(folio);
/*
* Lazyfree folios are clean anonymous folios. They have
* the swapbacked flag cleared, to distinguish them from normal
* anonymous folios
*/
folio_clear_swapbacked(folio);
lruvec_add_folio(lruvec, folio);
__count_vm_events(PGLAZYFREE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGLAZYFREE, nr_pages);
}
/*
* Drain pages out of the cpu's folio_batch.
* Either "cpu" is the current CPU, and preemption has already been
* disabled; or "cpu" is being hot-unplugged, and is already dead.
*/
void lru_add_drain_cpu(int cpu)
{
struct cpu_fbatches *fbatches = &per_cpu(cpu_fbatches, cpu);
struct folio_batch *fbatch = &fbatches->lru_add;
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_add);
fbatch = &fbatches->lru_move_tail;
/* Disabling interrupts below acts as a compiler barrier. */
if (data_race(folio_batch_count(fbatch))) {
unsigned long flags;
/* No harm done if a racing interrupt already did this */
local_lock_irqsave(&cpu_fbatches.lock_irq, flags);
folio_batch_move_lru(fbatch, lru_move_tail);
local_unlock_irqrestore(&cpu_fbatches.lock_irq, flags);
}
fbatch = &fbatches->lru_deactivate_file;
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_deactivate_file);
fbatch = &fbatches->lru_deactivate;
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_deactivate);
fbatch = &fbatches->lru_lazyfree;
if (folio_batch_count(fbatch))
folio_batch_move_lru(fbatch, lru_lazyfree);
folio_activate_drain(cpu);
}
/**
* deactivate_file_folio() - Deactivate a file folio.
* @folio: Folio to deactivate.
*
* This function hints to the VM that @folio is a good reclaim candidate,
* for example if its invalidation fails due to the folio being dirty
* or under writeback.
*
* Context: Caller holds a reference on the folio.
*/
void deactivate_file_folio(struct folio *folio)
{
/* Deactivating an unevictable folio will not accelerate reclaim */
if (folio_test_unevictable(folio))
return;
if (lru_gen_enabled() && lru_gen_clear_refs(folio))
return;
folio_batch_add_and_move(folio, lru_deactivate_file, true);
}
/*
* folio_deactivate - deactivate a folio
* @folio: folio to deactivate
*
* folio_deactivate() moves @folio to the inactive list if @folio was on the
* active list and was not unevictable. This is done to accelerate the
* reclaim of @folio.
*/
void folio_deactivate(struct folio *folio)
{
if (folio_test_unevictable(folio))
return;
if (lru_gen_enabled() ? lru_gen_clear_refs(folio) : !folio_test_active(folio))
return;
folio_batch_add_and_move(folio, lru_deactivate, true);
}
/**
* folio_mark_lazyfree - make an anon folio lazyfree
* @folio: folio to deactivate
*
* folio_mark_lazyfree() moves @folio to the inactive file list.
* This is done to accelerate the reclaim of @folio.
*/
void folio_mark_lazyfree(struct folio *folio)
{
if (!folio_test_anon(folio) || !folio_test_swapbacked(folio) ||
folio_test_swapcache(folio) || folio_test_unevictable(folio))
return;
folio_batch_add_and_move(folio, lru_lazyfree, true);
}
void lru_add_drain(void)
{
local_lock(&cpu_fbatches.lock);
lru_add_drain_cpu(smp_processor_id());
local_unlock(&cpu_fbatches.lock);
mlock_drain_local();
}
/*
* It's called from per-cpu workqueue context in SMP case so
* lru_add_drain_cpu and invalidate_bh_lrus_cpu should run on
* the same cpu. It shouldn't be a problem in !SMP case since
* the core is only one and the locks will disable preemption.
*/
static void lru_add_and_bh_lrus_drain(void)
{
local_lock(&cpu_fbatches.lock);
lru_add_drain_cpu(smp_processor_id());
local_unlock(&cpu_fbatches.lock);
invalidate_bh_lrus_cpu();
mlock_drain_local();
}
void lru_add_drain_cpu_zone(struct zone *zone)
{
local_lock(&cpu_fbatches.lock);
lru_add_drain_cpu(smp_processor_id());
drain_local_pages(zone);
local_unlock(&cpu_fbatches.lock);
mlock_drain_local();
}
#ifdef CONFIG_SMP
static DEFINE_PER_CPU(struct work_struct, lru_add_drain_work);
static void lru_add_drain_per_cpu(struct work_struct *dummy)
{
lru_add_and_bh_lrus_drain();
}
static bool cpu_needs_drain(unsigned int cpu)
{
struct cpu_fbatches *fbatches = &per_cpu(cpu_fbatches, cpu);
/* Check these in order of likelihood that they're not zero */
return folio_batch_count(&fbatches->lru_add) ||
folio_batch_count(&fbatches->lru_move_tail) ||
folio_batch_count(&fbatches->lru_deactivate_file) ||
folio_batch_count(&fbatches->lru_deactivate) ||
folio_batch_count(&fbatches->lru_lazyfree) ||
folio_batch_count(&fbatches->lru_activate) ||
need_mlock_drain(cpu) ||
has_bh_in_lru(cpu, NULL);
}
/*
* Doesn't need any cpu hotplug locking because we do rely on per-cpu
* kworkers being shut down before our page_alloc_cpu_dead callback is
* executed on the offlined cpu.
* Calling this function with cpu hotplug locks held can actually lead
* to obscure indirect dependencies via WQ context.
*/
static inline void __lru_add_drain_all(bool force_all_cpus)
{
/*
* lru_drain_gen - Global pages generation number
*
* (A) Definition: global lru_drain_gen = x implies that all generations
* 0 < n <= x are already *scheduled* for draining.
*
* This is an optimization for the highly-contended use case where a
* user space workload keeps constantly generating a flow of pages for
* each CPU.
*/
static unsigned int lru_drain_gen;
static struct cpumask has_work;
static DEFINE_MUTEX(lock);
unsigned cpu, this_gen;
/*
* Make sure nobody triggers this path before mm_percpu_wq is fully
* initialized.
*/
if (WARN_ON(!mm_percpu_wq))
return;
/*
* Guarantee folio_batch counter stores visible by this CPU
* are visible to other CPUs before loading the current drain
* generation.
*/
smp_mb();
/*
* (B) Locally cache global LRU draining generation number
*
* The read barrier ensures that the counter is loaded before the mutex
* is taken. It pairs with smp_mb() inside the mutex critical section
* at (D).
*/
this_gen = smp_load_acquire(&lru_drain_gen);
mutex_lock(&lock);
/*
* (C) Exit the draining operation if a newer generation, from another
* lru_add_drain_all(), was already scheduled for draining. Check (A).
*/
if (unlikely(this_gen != lru_drain_gen && !force_all_cpus))
goto done;
/*
* (D) Increment global generation number
*
* Pairs with smp_load_acquire() at (B), outside of the critical
* section. Use a full memory barrier to guarantee that the
* new global drain generation number is stored before loading
* folio_batch counters.
*
* This pairing must be done here, before the for_each_online_cpu loop
* below which drains the page vectors.
*
* Let x, y, and z represent some system CPU numbers, where x < y < z.
* Assume CPU #z is in the middle of the for_each_online_cpu loop
* below and has already reached CPU #y's per-cpu data. CPU #x comes
* along, adds some pages to its per-cpu vectors, then calls
* lru_add_drain_all().
*
* If the paired barrier is done at any later step, e.g. after the
* loop, CPU #x will just exit at (C) and miss flushing out all of its
* added pages.
*/
WRITE_ONCE(lru_drain_gen, lru_drain_gen + 1);
smp_mb();
cpumask_clear(&has_work);
for_each_online_cpu(cpu) {
struct work_struct *work = &per_cpu(lru_add_drain_work, cpu);
if (cpu_needs_drain(cpu)) {
INIT_WORK(work, lru_add_drain_per_cpu);
queue_work_on(cpu, mm_percpu_wq, work);
__cpumask_set_cpu(cpu, &has_work);
}
}
for_each_cpu(cpu, &has_work)
flush_work(&per_cpu(lru_add_drain_work, cpu));
done:
mutex_unlock(&lock);
}
void lru_add_drain_all(void)
{
__lru_add_drain_all(false);
}
#else
void lru_add_drain_all(void)
{
lru_add_drain();
}
#endif /* CONFIG_SMP */
atomic_t lru_disable_count = ATOMIC_INIT(0);
/*
* lru_cache_disable() needs to be called before we start compiling
* a list of folios to be migrated using folio_isolate_lru().
* It drains folios on LRU cache and then disable on all cpus until
* lru_cache_enable is called.
*
* Must be paired with a call to lru_cache_enable().
*/
void lru_cache_disable(void)
{
atomic_inc(&lru_disable_count);
/*
* Readers of lru_disable_count are protected by either disabling
* preemption or rcu_read_lock:
*
* preempt_disable, local_irq_disable [bh_lru_lock()]
* rcu_read_lock [rt_spin_lock CONFIG_PREEMPT_RT]
* preempt_disable [local_lock !CONFIG_PREEMPT_RT]
*
* Since v5.1 kernel, synchronize_rcu() is guaranteed to wait on
* preempt_disable() regions of code. So any CPU which sees
* lru_disable_count = 0 will have exited the critical
* section when synchronize_rcu() returns.
*/
synchronize_rcu_expedited();
#ifdef CONFIG_SMP
__lru_add_drain_all(true);
#else
lru_add_and_bh_lrus_drain();
#endif
}
/**
* folios_put_refs - Reduce the reference count on a batch of folios.
* @folios: The folios.
* @refs: The number of refs to subtract from each folio.
*
* Like folio_put(), but for a batch of folios. This is more efficient
* than writing the loop yourself as it will optimise the locks which need
* to be taken if the folios are freed. The folios batch is returned
* empty and ready to be reused for another batch; there is no need
* to reinitialise it. If @refs is NULL, we subtract one from each
* folio refcount.
*
* Context: May be called in process or interrupt context, but not in NMI
* context. May be called while holding a spinlock.
*/
void folios_put_refs(struct folio_batch *folios, unsigned int *refs)
{
int i, j;
struct lruvec *lruvec = NULL;
unsigned long flags = 0;
for (i = 0, j = 0; i < folios->nr; i++) {
struct folio *folio = folios->folios[i];
unsigned int nr_refs = refs ? refs[i] : 1;
if (is_huge_zero_folio(folio))
continue;
if (folio_is_zone_device(folio)) {
if (lruvec) {
unlock_page_lruvec_irqrestore(lruvec, flags);
lruvec = NULL;
}
if (put_devmap_managed_folio_refs(folio, nr_refs))
continue;
if (folio_ref_sub_and_test(folio, nr_refs))
free_zone_device_folio(folio);
continue;
}
if (!folio_ref_sub_and_test(folio, nr_refs))
continue;
/* hugetlb has its own memcg */
if (folio_test_hugetlb(folio)) {
if (lruvec) {
unlock_page_lruvec_irqrestore(lruvec, flags);
lruvec = NULL;
}
free_huge_folio(folio);
continue;
}
folio_unqueue_deferred_split(folio);
__page_cache_release(folio, &lruvec, &flags);
if (j != i)
folios->folios[j] = folio;
j++;
}
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
if (!j) {
folio_batch_reinit(folios);
return;
}
folios->nr = j;
mem_cgroup_uncharge_folios(folios);
free_unref_folios(folios);
}
EXPORT_SYMBOL(folios_put_refs);
/**
* release_pages - batched put_page()
* @arg: array of pages to release
* @nr: number of pages
*
* Decrement the reference count on all the pages in @arg. If it
* fell to zero, remove the page from the LRU and free it.
*
* Note that the argument can be an array of pages, encoded pages,
* or folio pointers. We ignore any encoded bits, and turn any of
* them into just a folio that gets free'd.
*/
void release_pages(release_pages_arg arg, int nr)
{
struct folio_batch fbatch;
int refs[PAGEVEC_SIZE];
struct encoded_page **encoded = arg.encoded_pages;
int i;
folio_batch_init(&fbatch);
for (i = 0; i < nr; i++) {
/* Turn any of the argument types into a folio */
struct folio *folio = page_folio(encoded_page_ptr(encoded[i]));
/* Is our next entry actually "nr_pages" -> "nr_refs" ? */
refs[fbatch.nr] = 1;
if (unlikely(encoded_page_flags(encoded[i]) &
ENCODED_PAGE_BIT_NR_PAGES_NEXT))
refs[fbatch.nr] = encoded_nr_pages(encoded[++i]);
if (folio_batch_add(&fbatch, folio) > 0)
continue;
folios_put_refs(&fbatch, refs);
}
if (fbatch.nr)
folios_put_refs(&fbatch, refs);
}
EXPORT_SYMBOL(release_pages);
/*
* The folios which we're about to release may be in the deferred lru-addition
* queues. That would prevent them from really being freed right now. That's
* OK from a correctness point of view but is inefficient - those folios may be
* cache-warm and we want to give them back to the page allocator ASAP.
*
* So __folio_batch_release() will drain those queues here.
* folio_batch_move_lru() calls folios_put() directly to avoid
* mutual recursion.
*/
void __folio_batch_release(struct folio_batch *fbatch)
{
if (!fbatch->percpu_pvec_drained) {
lru_add_drain();
fbatch->percpu_pvec_drained = true;
}
folios_put(fbatch);
}
EXPORT_SYMBOL(__folio_batch_release);
/**
* folio_batch_remove_exceptionals() - Prune non-folios from a batch.
* @fbatch: The batch to prune
*
* find_get_entries() fills a batch with both folios and shadow/swap/DAX
* entries. This function prunes all the non-folio entries from @fbatch
* without leaving holes, so that it can be passed on to folio-only batch
* operations.
*/
void folio_batch_remove_exceptionals(struct folio_batch *fbatch)
{
unsigned int i, j;
for (i = 0, j = 0; i < folio_batch_count(fbatch); i++) {
struct folio *folio = fbatch->folios[i];
if (!xa_is_value(folio))
fbatch->folios[j++] = folio;
}
fbatch->nr = j;
}
/*
* Perform any setup for the swap system
*/
void __init swap_setup(void)
{
unsigned long megs = totalram_pages() >> (20 - PAGE_SHIFT);
/* Use a smaller cluster for small-memory machines */
if (megs < 16)
page_cluster = 2;
else
page_cluster = 3;
/*
* Right now other parts of the system means that we
* _really_ don't want to cluster much more
*/
}