1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
linux/drivers/usb/host/xhci-plat.c
Frank Li 9df478463d usb: xhci-plat: fix crash when suspend if remote wake enable
Crashed at i.mx8qm platform when suspend if enable remote wakeup

Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 244 Comm: kworker/u12:6 Not tainted 5.15.5-dirty #12
Hardware name: Freescale i.MX8QM MEK (DT)
Workqueue: events_unbound async_run_entry_fn
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : xhci_disable_hub_port_wake.isra.62+0x60/0xf8
lr : xhci_disable_hub_port_wake.isra.62+0x34/0xf8
sp : ffff80001394bbf0
x29: ffff80001394bbf0 x28: 0000000000000000 x27: ffff00081193b578
x26: ffff00081193b570 x25: 0000000000000000 x24: 0000000000000000
x23: ffff00081193a29c x22: 0000000000020001 x21: 0000000000000001
x20: 0000000000000000 x19: ffff800014e90490 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000002 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000960 x9 : ffff80001394baa0
x8 : ffff0008145d1780 x7 : ffff0008f95b8e80 x6 : 000000001853b453
x5 : 0000000000000496 x4 : 0000000000000000 x3 : ffff00081193a29c
x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000814591620
Call trace:
 xhci_disable_hub_port_wake.isra.62+0x60/0xf8
 xhci_suspend+0x58/0x510
 xhci_plat_suspend+0x50/0x78
 platform_pm_suspend+0x2c/0x78
 dpm_run_callback.isra.25+0x50/0xe8
 __device_suspend+0x108/0x3c0

The basic flow:
	1. run time suspend call xhci_suspend, xhci parent devices gate the clock.
        2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend
        3. xhci_suspend call xhci_disable_hub_port_wake, which access register,
	   but clock already gated by run time suspend.

This problem was hidden by power domain driver, which call run time resume before it.

But the below commit remove it and make this issue happen.
	commit c1df456d0f ("PM: domains: Don't runtime resume devices at genpd_prepare()")

This patch call run time resume before suspend to make sure clock is on
before access register.

Reviewed-by: Peter Chen <peter.chen@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Testeb-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220110172738.31686-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26 13:42:33 +01:00

539 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* xhci-plat.c - xHCI host controller driver platform Bus Glue.
*
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com
* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* A lot of code borrowed from the Linux xHCI driver.
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/usb/phy.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/usb/of.h>
#include "xhci.h"
#include "xhci-plat.h"
#include "xhci-mvebu.h"
#include "xhci-rcar.h"
static struct hc_driver __read_mostly xhci_plat_hc_driver;
static int xhci_plat_setup(struct usb_hcd *hcd);
static int xhci_plat_start(struct usb_hcd *hcd);
static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
.extra_priv_size = sizeof(struct xhci_plat_priv),
.reset = xhci_plat_setup,
.start = xhci_plat_start,
};
static void xhci_priv_plat_start(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (priv->plat_start)
priv->plat_start(hcd);
}
static int xhci_priv_plat_setup(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->plat_setup)
return 0;
return priv->plat_setup(hcd);
}
static int xhci_priv_init_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->init_quirk)
return 0;
return priv->init_quirk(hcd);
}
static int xhci_priv_suspend_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->suspend_quirk)
return 0;
return priv->suspend_quirk(hcd);
}
static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->resume_quirk)
return 0;
return priv->resume_quirk(hcd);
}
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
struct xhci_plat_priv *priv = xhci_to_priv(xhci);
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT | priv->quirks;
}
/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
int ret;
ret = xhci_priv_init_quirk(hcd);
if (ret)
return ret;
return xhci_gen_setup(hcd, xhci_plat_quirks);
}
static int xhci_plat_start(struct usb_hcd *hcd)
{
xhci_priv_plat_start(hcd);
return xhci_run(hcd);
}
#ifdef CONFIG_OF
static const struct xhci_plat_priv xhci_plat_marvell_armada = {
.init_quirk = xhci_mvebu_mbus_init_quirk,
};
static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
.plat_setup = xhci_mvebu_a3700_plat_setup,
.init_quirk = xhci_mvebu_a3700_init_quirk,
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1)
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3)
};
static const struct xhci_plat_priv xhci_plat_brcm = {
.quirks = XHCI_RESET_ON_RESUME,
};
static const struct of_device_id usb_xhci_of_match[] = {
{
.compatible = "generic-xhci",
}, {
.compatible = "xhci-platform",
}, {
.compatible = "marvell,armada-375-xhci",
.data = &xhci_plat_marvell_armada,
}, {
.compatible = "marvell,armada-380-xhci",
.data = &xhci_plat_marvell_armada,
}, {
.compatible = "marvell,armada3700-xhci",
.data = &xhci_plat_marvell_armada3700,
}, {
.compatible = "renesas,xhci-r8a7790",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7791",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7793",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7795",
.data = &xhci_plat_renesas_rcar_gen3,
}, {
.compatible = "renesas,xhci-r8a7796",
.data = &xhci_plat_renesas_rcar_gen3,
}, {
.compatible = "renesas,rcar-gen2-xhci",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,rcar-gen3-xhci",
.data = &xhci_plat_renesas_rcar_gen3,
}, {
.compatible = "brcm,xhci-brcm-v2",
.data = &xhci_plat_brcm,
}, {
.compatible = "brcm,bcm7445-xhci",
.data = &xhci_plat_brcm,
},
{},
};
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
#endif
static int xhci_plat_probe(struct platform_device *pdev)
{
const struct xhci_plat_priv *priv_match;
const struct hc_driver *driver;
struct device *sysdev, *tmpdev;
struct xhci_hcd *xhci;
struct resource *res;
struct usb_hcd *hcd;
int ret;
int irq;
struct xhci_plat_priv *priv = NULL;
if (usb_disabled())
return -ENODEV;
driver = &xhci_plat_hc_driver;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
/*
* sysdev must point to a device that is known to the system firmware
* or PCI hardware. We handle these three cases here:
* 1. xhci_plat comes from firmware
* 2. xhci_plat is child of a device from firmware (dwc3-plat)
* 3. xhci_plat is grandchild of a pci device (dwc3-pci)
*/
for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
if (is_of_node(sysdev->fwnode) ||
is_acpi_device_node(sysdev->fwnode))
break;
#ifdef CONFIG_PCI
else if (sysdev->bus == &pci_bus_type)
break;
#endif
}
if (!sysdev)
sysdev = &pdev->dev;
/* Try to set 64-bit DMA first */
if (WARN_ON(!sysdev->dma_mask))
/* Platform did not initialize dma_mask */
ret = dma_coerce_mask_and_coherent(sysdev,
DMA_BIT_MASK(64));
else
ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
/* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
if (ret) {
ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32));
if (ret)
return ret;
}
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
dev_name(&pdev->dev), NULL);
if (!hcd) {
ret = -ENOMEM;
goto disable_runtime;
}
hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
goto put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
xhci = hcd_to_xhci(hcd);
/*
* Not all platforms have clks so it is not an error if the
* clock do not exist.
*/
xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
if (IS_ERR(xhci->reg_clk)) {
ret = PTR_ERR(xhci->reg_clk);
goto put_hcd;
}
ret = clk_prepare_enable(xhci->reg_clk);
if (ret)
goto put_hcd;
xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
if (IS_ERR(xhci->clk)) {
ret = PTR_ERR(xhci->clk);
goto disable_reg_clk;
}
ret = clk_prepare_enable(xhci->clk);
if (ret)
goto disable_reg_clk;
if (pdev->dev.of_node)
priv_match = of_device_get_match_data(&pdev->dev);
else
priv_match = dev_get_platdata(&pdev->dev);
if (priv_match) {
priv = hcd_to_xhci_priv(hcd);
/* Just copy data for now */
*priv = *priv_match;
}
device_set_wakeup_capable(&pdev->dev, true);
xhci->main_hcd = hcd;
xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
dev_name(&pdev->dev), hcd);
if (!xhci->shared_hcd) {
ret = -ENOMEM;
goto disable_clk;
}
/* imod_interval is the interrupt moderation value in nanoseconds. */
xhci->imod_interval = 40000;
/* Iterate over all parent nodes for finding quirks */
for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
xhci->quirks |= XHCI_HW_LPM_DISABLE;
if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
xhci->quirks |= XHCI_LPM_SUPPORT;
if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
xhci->quirks |= XHCI_BROKEN_PORT_PED;
device_property_read_u32(tmpdev, "imod-interval-ns",
&xhci->imod_interval);
}
hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
ret = PTR_ERR(hcd->usb_phy);
if (ret == -EPROBE_DEFER)
goto put_usb3_hcd;
hcd->usb_phy = NULL;
} else {
ret = usb_phy_init(hcd->usb_phy);
if (ret)
goto put_usb3_hcd;
}
hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
xhci->shared_hcd->tpl_support = hcd->tpl_support;
if (priv) {
ret = xhci_priv_plat_setup(hcd);
if (ret)
goto disable_usb_phy;
}
if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)))
hcd->skip_phy_initialization = 1;
if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_usb_phy;
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto dealloc_usb2_hcd;
device_enable_async_suspend(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
/*
* Prevent runtime pm from being on as default, users should enable
* runtime pm using power/control in sysfs.
*/
pm_runtime_forbid(&pdev->dev);
return 0;
dealloc_usb2_hcd:
usb_remove_hcd(hcd);
disable_usb_phy:
usb_phy_shutdown(hcd->usb_phy);
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
disable_clk:
clk_disable_unprepare(xhci->clk);
disable_reg_clk:
clk_disable_unprepare(xhci->reg_clk);
put_hcd:
usb_put_hcd(hcd);
disable_runtime:
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
static int xhci_plat_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;
struct clk *reg_clk = xhci->reg_clk;
struct usb_hcd *shared_hcd = xhci->shared_hcd;
pm_runtime_get_sync(&dev->dev);
xhci->xhc_state |= XHCI_STATE_REMOVING;
usb_remove_hcd(shared_hcd);
xhci->shared_hcd = NULL;
usb_phy_shutdown(hcd->usb_phy);
usb_remove_hcd(hcd);
usb_put_hcd(shared_hcd);
clk_disable_unprepare(clk);
clk_disable_unprepare(reg_clk);
usb_put_hcd(hcd);
pm_runtime_disable(&dev->dev);
pm_runtime_put_noidle(&dev->dev);
pm_runtime_set_suspended(&dev->dev);
return 0;
}
static int __maybe_unused xhci_plat_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
if (pm_runtime_suspended(dev))
pm_runtime_resume(dev);
ret = xhci_priv_suspend_quirk(hcd);
if (ret)
return ret;
/*
* xhci_suspend() needs `do_wakeup` to know whether host is allowed
* to do wakeup during suspend.
*/
return xhci_suspend(xhci, device_may_wakeup(dev));
}
static int __maybe_unused xhci_plat_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
ret = xhci_priv_resume_quirk(hcd);
if (ret)
return ret;
ret = xhci_resume(xhci, 0);
if (ret)
return ret;
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
}
static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
ret = xhci_priv_suspend_quirk(hcd);
if (ret)
return ret;
return xhci_suspend(xhci, true);
}
static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
return xhci_resume(xhci, 0);
}
static const struct dev_pm_ops xhci_plat_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
xhci_plat_runtime_resume,
NULL)
};
#ifdef CONFIG_ACPI
static const struct acpi_device_id usb_xhci_acpi_match[] = {
/* XHCI-compliant USB Controller */
{ "PNP0D10", },
{ }
};
MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
#endif
static struct platform_driver usb_xhci_driver = {
.probe = xhci_plat_probe,
.remove = xhci_plat_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "xhci-hcd",
.pm = &xhci_plat_pm_ops,
.of_match_table = of_match_ptr(usb_xhci_of_match),
.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
},
};
MODULE_ALIAS("platform:xhci-hcd");
static int __init xhci_plat_init(void)
{
xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
return platform_driver_register(&usb_xhci_driver);
}
module_init(xhci_plat_init);
static void __exit xhci_plat_exit(void)
{
platform_driver_unregister(&usb_xhci_driver);
}
module_exit(xhci_plat_exit);
MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
MODULE_LICENSE("GPL");