| .. |
|
aquantia
|
net: phy: aquantia: add AQR813 PHY ID
|
2024-02-18 14:27:58 +00:00 |
|
mscc
|
net: phy: extend PHY package API to support multiple global address
|
2023-12-17 20:10:07 +00:00 |
|
qcom
|
net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
|
2024-03-06 20:39:29 -08:00 |
|
adin.c
|
net: phy: adin: allow control of Fast Link Down
|
2023-11-29 19:49:38 -08:00 |
|
adin1100.c
|
net: phy: adin1100: Add interrupt support for link change
|
2024-01-31 16:22:29 -08:00 |
|
amd.c
|
net: phy: amd: Support the Altima AMI101L
|
2023-10-03 11:44:09 +02:00 |
|
ax88796b.c
|
net: phy: fix regression with AX88772A PHY driver
|
2023-09-19 17:03:44 +02:00 |
|
ax88796b_rust.rs
|
net: phy: add Rust Asix PHY driver
|
2023-12-15 09:35:50 +00:00 |
|
bcm-cygnus.c
|
|
|
|
bcm-phy-lib.c
|
net: phy: broadcom: Add support for setting LED brightness
|
2023-06-09 10:38:43 +01:00 |
|
bcm-phy-lib.h
|
net: phy: broadcom: Add support for setting LED brightness
|
2023-06-09 10:38:43 +01:00 |
|
bcm-phy-ptp.c
|
net: partial revert of the "Make timestamping selectable: series
|
2023-11-18 18:42:37 -08:00 |
|
bcm7xxx.c
|
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
|
2023-10-18 18:13:13 -07:00 |
|
bcm63xx.c
|
|
|
|
bcm87xx.c
|
net: phy: fill in missing MODULE_DESCRIPTION()s
|
2023-11-01 21:50:56 -07:00 |
|
bcm54140.c
|
net: phy: extend PHY package API to support multiple global address
|
2023-12-17 20:10:07 +00:00 |
|
bcm84881.c
|
net: phy: bcm84881: fill in possible_interfaces
|
2023-11-27 18:04:12 -08:00 |
|
broadcom.c
|
net: phy: provide whether link has changed in c37_read_status
|
2024-02-10 15:36:19 +00:00 |
|
cicada.c
|
|
|
|
cortina.c
|
|
|
|
davicom.c
|
net: phy: fix space alignment issues
|
2021-06-16 12:34:07 -07:00 |
|
dp83tc811.c
|
net: phy: ti: take into account all possible interrupt sources
|
2021-03-01 11:46:55 -08:00 |
|
dp83td510.c
|
net: phy: dp83td510: fix kernel stall during netboot in DP83TD510E PHY driver
|
2023-06-22 19:43:55 -07:00 |
|
dp83tg720.c
|
net: phy: Add support for the DP83TG720S Ethernet PHY
|
2023-12-13 18:01:08 -08:00 |
|
dp83640.c
|
net: partial revert of the "Make timestamping selectable: series
|
2023-11-18 18:42:37 -08:00 |
|
dp83640_reg.h
|
ptp: dp83640: don't define PAGE0
|
2021-09-14 20:03:24 -07:00 |
|
dp83822.c
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
|
2024-03-11 20:38:36 -07:00 |
|
dp83848.c
|
|
|
|
dp83867.c
|
net: phy: dp83867: Add support for active-low LEDs
|
2024-02-02 10:12:21 +00:00 |
|
dp83869.c
|
net: phy: dp83869: support mii mode when rgmii strap cfg is used
|
2023-05-09 11:57:53 +02:00 |
|
et1011c.c
|
net: phy: remove unnecessary line continuation
|
2021-06-16 12:34:07 -07:00 |
|
fixed_phy.c
|
net: phy: fixed_phy: set phy_mask before calling mdiobus_register()
|
2022-06-13 23:11:24 -07:00 |
|
icplus.c
|
net: phy: icplus: call phy_restore_page() when phy_select_page() fails
|
2021-02-22 18:47:48 -08:00 |
|
intel-xway.c
|
net: phy: intel-xway: Add RGMII internal delay configuration
|
2021-07-20 07:23:16 -07:00 |
|
Kconfig
|
net: phy: marvell-88q2xxx: add support for temperature sensor
|
2024-02-21 14:56:59 -08:00 |
|
linkmode.c
|
|
|
|
lxt.c
|
net: phy: correct format of block comments
|
2021-06-16 12:34:07 -07:00 |
|
Makefile
|
net: phy: move at803x PHY driver to dedicated directory
|
2024-01-31 16:25:16 -08:00 |
|
marvell-88q2xxx.c
|
net: phy: marvell-88q2xxx: move interrupt configuration
|
2024-02-21 14:57:00 -08:00 |
|
marvell-88x2222.c
|
net: phy: marvell-88x2222: Remove unused of_gpio.h
|
2024-03-11 13:46:01 -07:00 |
|
marvell.c
|
net: phy: marvell: add comment about m88e1111_config_init_1000basex()
|
2024-03-07 20:48:51 -08:00 |
|
marvell10g.c
|
Revert "Introduce PHY listing and link_topology tracking"
|
2024-01-04 16:05:47 -08:00 |
|
mdio-boardinfo.c
|
net: phy: Correct function name mdiobus_register_board_info() in comment
|
2021-03-29 13:42:44 -07:00 |
|
mdio-boardinfo.h
|
|
|
|
mdio-open-alliance.h
|
drivers/net/phy: add helpers to get/set PLCA configuration
|
2023-01-11 08:35:02 +00:00 |
|
mdio_bus.c
|
net: mdio_bus: Remove unused of_gpio.h
|
2024-03-11 13:45:12 -07:00 |
|
mdio_device.c
|
net: phy: mdio_device: Reset device only when necessary
|
2023-11-30 23:11:21 -08:00 |
|
mdio_devres.c
|
net: fill in MODULE_DESCRIPTION()s for mdio_devres
|
2024-02-15 08:03:46 -08:00 |
|
mediatek-ge-soc.c
|
net: phy: mediatek-ge-soc: sync driver with MediaTek SDK
|
2024-01-25 17:34:57 -08:00 |
|
mediatek-ge.c
|
net: phy: add driver for MediaTek SoC built-in GE PHYs
|
2023-06-12 11:55:04 +01:00 |
|
meson-gxl.c
|
net: phy: meson-gxl: enable edpd tunable support for G12A internal PHY
|
2023-04-04 18:56:01 -07:00 |
|
micrel.c
|
net: phy: micrel: lan8814 cable improvement errata
|
2024-03-05 11:17:46 -08:00 |
|
microchip.c
|
net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver
|
2023-03-02 22:21:07 -08:00 |
|
microchip_t1.c
|
net: phy: microchip: run phy initialization during each link update
|
2023-01-23 22:34:19 -08:00 |
|
microchip_t1s.c
|
net: phy: microchip_t1s: add support for Microchip LAN865x Rev.B0 PHYs
|
2023-05-30 11:49:55 +02:00 |
|
mii_timestamper.c
|
net: mii_timestamper: check NULL in unregister_mii_timestamper()
|
2021-06-11 13:08:52 -07:00 |
|
motorcomm.c
|
net: phy: motorcomm: Add pad drive strength cfg support
|
2023-07-24 10:36:45 +01:00 |
|
mxl-gpy.c
|
net: phy: mxl-gpy: fill in possible_interfaces for GPY21x chipset
|
2024-02-21 14:34:05 -08:00 |
|
national.c
|
net: phy: correct format of block comments
|
2021-06-16 12:34:07 -07:00 |
|
ncn26000.c
|
drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY
|
2023-01-11 08:35:03 +00:00 |
|
nxp-c45-tja11xx-macsec.c
|
net: phy: nxp-c45-tja11xx: implement mdo_insert_tx_tag
|
2023-12-27 13:08:10 +00:00 |
|
nxp-c45-tja11xx.c
|
net: phy: nxp-c45-tja11xx: add MACsec support
|
2023-12-27 13:08:10 +00:00 |
|
nxp-c45-tja11xx.h
|
net: phy: nxp-c45-tja11xx: add MACsec support
|
2023-12-27 13:08:10 +00:00 |
|
nxp-cbtx.c
|
net: phy: add basic driver for NXP CBTX PHY
|
2023-04-21 20:04:09 -07:00 |
|
nxp-tja11xx.c
|
net: Convert some ethtool_sprintf() to ethtool_puts()
|
2023-12-08 10:56:25 +00:00 |
|
phy-c45.c
|
net: phy: Immediately call adjust_link if only tx_lpi_enabled changes
|
2024-03-05 19:21:17 -08:00 |
|
phy-core.c
|
net: phy: add support for PHY package MMD read/write
|
2023-12-17 20:10:07 +00:00 |
|
phy.c
|
net: phy: simplify a check in phy_check_link_status
|
2024-03-11 13:46:27 -07:00 |
|
phy_device.c
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
|
2024-03-11 20:38:36 -07:00 |
|
phy_led_triggers.c
|
|
|
|
phylink.c
|
ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side
|
2024-01-31 12:30:47 +00:00 |
|
qsemi.c
|
net: phy: change format of some declarations
|
2021-06-16 12:34:07 -07:00 |
|
realtek.c
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
|
2024-02-22 15:29:26 -08:00 |
|
rockchip.c
|
net: phy: Demote non-compliant kernel-doc headers
|
2021-05-17 14:12:39 -07:00 |
|
sfp-bus.c
|
net: sfp-bus: fix SFP mode detect from bitrate
|
2024-01-16 17:49:49 -08:00 |
|
sfp.c
|
net: sfp: fix PHY discovery for FS SFP-10G-T module
|
2023-12-25 06:20:14 +00:00 |
|
sfp.h
|
net: sfp: Remove unused function declaration sfp_link_configure()
|
2023-08-07 08:53:55 +01:00 |
|
smsc.c
|
net: Convert some ethtool_sprintf() to ethtool_puts()
|
2023-12-08 10:56:25 +00:00 |
|
spi_ks8995.c
|
net: phy: ks8995: drop of_match_ptr for ID table
|
2023-03-15 08:11:02 +00:00 |
|
ste10Xp.c
|
net: phy: fix space alignment issues
|
2021-06-16 12:34:07 -07:00 |
|
stubs.c
|
net: phy: provide phylib stubs for hardware timestamping operations
|
2023-08-02 19:11:06 -07:00 |
|
swphy.c
|
|
|
|
swphy.h
|
|
|
|
teranetics.c
|
|
|
|
uPD60620.c
|
|
|
|
vitesse.c
|
net: phy: correct format of block comments
|
2021-06-16 12:34:07 -07:00 |
|
xilinx_gmii2rgmii.c
|
net: phy: constify phydev->drv
|
2024-02-06 12:44:40 +01:00 |
ed1f164038