4da71a77fc
Since 4.30 firmware exposes internal thermal sensor reading via admin
queue commands. Expose those readouts via hwmon API when supported.
Datasheet:
Get Sensor Reading Command (Opcode: 0x0632)
+--------------------+--------+--------------------+-------------------------+
| Name | Bytes | Value | Remarks |
+--------------------+--------+--------------------+-------------------------+
| Flags | 1-0 | | |
| Opcode | 2-3 | 0x0632 | Command opcode |
| Datalen | 4-5 | 0 | No external buffer. |
| Return value | 6-7 | | Return value. |
| Cookie High | 8-11 | Cookie | |
| Cookie Low | 12-15 | Cookie | |
| Sensor | 16 | | 0x00: Internal temp |
| | | | 0x01-0xFF: Reserved. |
| Format | 17 | Requested response | Only 0x00 is supported. |
| | | format | 0x01-0xFF: Reserved. |
| Reserved | 18-23 | | |
| Data Address high | 24-27 | Response buffer | |
| | | address | |
| Data Address low | 28-31 | Response buffer | |
| | | address | |
+--------------------+--------+--------------------+-------------------------+
Get Sensor Reading Response (Opcode: 0x0632)
+--------------------+--------+--------------------+-------------------------+
| Name | Bytes | Value | Remarks |
+--------------------+--------+--------------------+-------------------------+
| Flags | 1-0 | | |
| Opcode | 2-3 | 0x0632 | Command opcode |
| Datalen | 4-5 | 0 | No external buffer |
| Return value | 6-7 | | Return value. |
| | | | EINVAL: Invalid |
| | | | parameters |
| | | | ENOENT: Unsupported |
| | | | sensor |
| | | | EIO: Sensor access |
| | | | error |
| Cookie High | 8-11 | Cookie | |
| Cookie Low | 12-15 | Cookie | |
| Sensor Reading | 16-23 | | Format of the reading |
| | | | is dependent on request |
| Data Address high | 24-27 | Response buffer | |
| | | address | |
| Data Address low | 28-31 | Response buffer | |
| | | address | |
+--------------------+--------+--------------------+-------------------------+
Sensor Reading for Sensor 0x00 (Internal Chip Temperature):
+--------------------+--------+--------------------+-------------------------+
| Name | Bytes | Value | Remarks |
+--------------------+--------+--------------------+-------------------------+
| Thermal Sensor | 0 | | Reading in degrees |
| reading | | | Celsius. Signed int8 |
| Warning High | 1 | | Warning High threshold |
| threshold | | | in degrees Celsius. |
| | | | Unsigned int8. |
| | | | 0xFF when unsupported |
| Critical High | 2 | | Critical High threshold |
| threshold | | | in degrees Celsius. |
| | | | Unsigned int8. |
| | | | 0xFF when unsupported |
| Fatal High | 3 | | Fatal High threshold |
| threshold | | | in degrees Celsius. |
| | | | Unsigned int8. |
| | | | 0xFF when unsupported |
| Reserved | 4-7 | | |
+--------------------+--------+--------------------+-------------------------+
Driver provides current reading from HW as well as device specific
thresholds for thermal alarm (Warning, Critical, Fatal) events.
$ sensors
Output
=========================================================
ice-pci-b100
Adapter: PCI adapter
temp1: +62.0°C (high = +95.0°C, crit = +105.0°C)
(emerg = +115.0°C)
Tested on Intel Corporation Ethernet Controller E810-C for SFP
Co-developed-by: Marcin Domagala <marcinx.domagala@intel.com>
Signed-off-by: Marcin Domagala <marcinx.domagala@intel.com>
Co-developed-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
15 lines
435 B
C
15 lines
435 B
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/* Copyright (C) 2023, Intel Corporation. */
|
|
|
|
#ifndef _ICE_HWMON_H_
|
|
#define _ICE_HWMON_H_
|
|
|
|
#ifdef CONFIG_ICE_HWMON
|
|
void ice_hwmon_init(struct ice_pf *pf);
|
|
void ice_hwmon_exit(struct ice_pf *pf);
|
|
#else /* CONFIG_ICE_HWMON */
|
|
static inline void ice_hwmon_init(struct ice_pf *pf) { }
|
|
static inline void ice_hwmon_exit(struct ice_pf *pf) { }
|
|
#endif /* CONFIG_ICE_HWMON */
|
|
|
|
#endif /* _ICE_HWMON_H_ */
|