1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
linux/drivers/gpu/drm/meson/meson_drv.c
Daniel Vetter 8284bae723 drm-misc-next for v6.1:
UAPI Changes:
 
 Cross-subsystem Changes:
 - DMA-buf: documentation updates.
 - Assorted small fixes to vga16fb
 - Fix fbdev drivers to use the aperture helpers.
 - Make removal of conflicting drivers work correctly without fbdev enabled.
 
 Core Changes:
 - bridge, scheduler, dp-mst: Assorted small fixes.
 - Add more format helpers to fourcc, and use it to replace the cpp usage.
 - Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
   ("darkness", inverted single channel)
 - Add packed AYUV8888 and XYUV8888 formats.
 - Assorted documentation updates.
 - Rename ttm_bo_init to ttm_bo_init_validate.
 - Allow TTM bo's to exist without backing store.
 - Convert drm selftests to kunit.
 - Add managed init functions for (panel) bridge, crtc, encoder and connector.
 - Fix endianness handling in various format conversion helpers.
 - Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
 - Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
   drm_plane_helper is no longer needed in most drivers.
 - Use idr_init_base instead of idr_init.
 - Rename FB and GEM CMA helpers to DMA helpers.
 - Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
   takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
 - Move edid luminance calculation to core, and use it in i915.
 
 Driver Changes:
 - bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
   nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
   Assorted small fixes and doc updates.
 - vc4: Rework hdmi power up, and depend on PM.
 - panel/simple: Add Samsung LTL101AL01.
 - ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
   is unchanged, and use the new PM ops.
 - Revert some amdgpu commits that cause garbaged graphics when starting
   X, and reapply them with the real problem fixed.
 - Completely rework vc4 init to use managed helpers.
 - Rename via_drv to via_dri1, and move all stuff there only used by the
   dri1 implementation in preperation for atomic modeset.
 - Use regmap bulk write in ssd130x.
 - Power sequence and clock updates to it6505.
 - Split panel-sitrox-st7701  init sequence and rework mode programming code.
 - virtio: Improve error and edge conditions handling, and convert to use managed
   helpers.
 - Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
 - Add generic fbdev support to komeda.
 - Split mgag200 modeset handling to make it more model-specific.
 - Convert simpledrm to use atomic helpers.
 - Improve udl suspend/disconnect handling.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmMA59MACgkQ/lWMcqZw
 E8MBihAAtttSIF8fvRIgnoFeswteB5HlXtrSOVRns+0h7mNzcmUL3yp/jV9betND
 NEfBCERRIRk5vqkzm2o9P/rTG+KMYCyyCNdcvvh+rVn+HU2V9MwtJdowZqLu7Rxi
 Qn59SaL6fMQanJwF8yHcii1ikqelU8TfsMXcFXt2d/yjn5D/h80tNOULEB74zIDH
 Vey/xTawcqEz3Qbj2mL4VihEnzU1cziGTpZvAWU2GTdWLxxN88uA4RD2JDyvGaXG
 oO6oilYT9TW+2C+0jfMUysu7RcNYuo4KD8dSVLvec+UKDKdO1pSqn40vgTZp0MBw
 V0VGg/Lqg6+u33UQkxeRpdzTboD4cMjoeP0/IJdHQVMYYH449tXDgZEjXqVHdz2c
 Ea8JIm36CHjqA0Ua3DT8y1qRtdrjuATJauoB6MXW8RpguqMzVuI4e9Dio77WRNYe
 Lg/V5AlQEKcwxeqe6v+8K7aB4lvHZ9g0WSMFHoxYz28d2cFWDVeKgK/GCW3WWMKo
 AQigRS84z3QBqK+IeTjbfZREoRFtx7NzQpzU9jQdL06XGWExhGOs8yU2OCoDNN8+
 iFMBStEPHLPg27HrLV5JYeMRUBPJMnwQhAEnrSv9KqIfPD3/g2jonoGm3J57p+OI
 Ag7pwg88spzP1DC7M6+UvzUnH76Dhf4hdnfQjz10c6BfS1ODPbA=
 =kU/l
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.1:

UAPI Changes:

Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.

Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
  ("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
  drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
  takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.

Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
  nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
  Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
  is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
  X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
  dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701  init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
  helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
2022-09-06 10:56:04 +02:00

546 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2016 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
* Copyright (C) 2014 Endless Mobile
*
* Written by:
* Jasper St. Pierre <jstpierre@mecheye.net>
*/
#include <linux/component.h>
#include <linux/module.h>
#include <linux/of_graph.h>
#include <linux/sys_soc.h>
#include <linux/platform_device.h>
#include <linux/soc/amlogic/meson-canvas.h>
#include <drm/drm_aperture.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_gem_dma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_modeset_helper_vtables.h>
#include <drm/drm_module.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_vblank.h>
#include "meson_crtc.h"
#include "meson_drv.h"
#include "meson_overlay.h"
#include "meson_plane.h"
#include "meson_osd_afbcd.h"
#include "meson_registers.h"
#include "meson_encoder_cvbs.h"
#include "meson_encoder_hdmi.h"
#include "meson_viu.h"
#include "meson_vpp.h"
#include "meson_rdma.h"
#define DRIVER_NAME "meson"
#define DRIVER_DESC "Amlogic Meson DRM driver"
/**
* DOC: Video Processing Unit
*
* VPU Handles the Global Video Processing, it includes management of the
* clocks gates, blocks reset lines and power domains.
*
* What is missing :
*
* - Full reset of entire video processing HW blocks
* - Scaling and setup of the VPU clock
* - Bus clock gates
* - Powering up video processing HW blocks
* - Powering Up HDMI controller and PHY
*/
static const struct drm_mode_config_funcs meson_mode_config_funcs = {
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
.fb_create = drm_gem_fb_create,
};
static const struct drm_mode_config_helper_funcs meson_mode_config_helpers = {
.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
};
static irqreturn_t meson_irq(int irq, void *arg)
{
struct drm_device *dev = arg;
struct meson_drm *priv = dev->dev_private;
(void)readl_relaxed(priv->io_base + _REG(VENC_INTFLAG));
meson_crtc_irq(priv);
return IRQ_HANDLED;
}
static int meson_dumb_create(struct drm_file *file, struct drm_device *dev,
struct drm_mode_create_dumb *args)
{
/*
* We need 64bytes aligned stride, and PAGE aligned size
*/
args->pitch = ALIGN(DIV_ROUND_UP(args->width * args->bpp, 8), SZ_64);
args->size = PAGE_ALIGN(args->pitch * args->height);
return drm_gem_dma_dumb_create_internal(file, dev, args);
}
DEFINE_DRM_GEM_DMA_FOPS(fops);
static const struct drm_driver meson_driver = {
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
/* DMA Ops */
DRM_GEM_DMA_DRIVER_OPS_WITH_DUMB_CREATE(meson_dumb_create),
/* Misc */
.fops = &fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = "20161109",
.major = 1,
.minor = 0,
};
static bool meson_vpu_has_available_connectors(struct device *dev)
{
struct device_node *ep, *remote;
/* Parses each endpoint and check if remote exists */
for_each_endpoint_of_node(dev->of_node, ep) {
/* If the endpoint node exists, consider it enabled */
remote = of_graph_get_remote_port(ep);
if (remote) {
of_node_put(remote);
of_node_put(ep);
return true;
}
}
return false;
}
static struct regmap_config meson_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x1000,
};
static void meson_vpu_init(struct meson_drm *priv)
{
u32 value;
/*
* Slave dc0 and dc5 connected to master port 1.
* By default other slaves are connected to master port 0.
*/
value = VPU_RDARB_SLAVE_TO_MASTER_PORT(0, 1) |
VPU_RDARB_SLAVE_TO_MASTER_PORT(5, 1);
writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L1C1));
/* Slave dc0 connected to master port 1 */
value = VPU_RDARB_SLAVE_TO_MASTER_PORT(0, 1);
writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L1C2));
/* Slave dc4 and dc7 connected to master port 1 */
value = VPU_RDARB_SLAVE_TO_MASTER_PORT(4, 1) |
VPU_RDARB_SLAVE_TO_MASTER_PORT(7, 1);
writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L2C1));
/* Slave dc1 connected to master port 1 */
value = VPU_RDARB_SLAVE_TO_MASTER_PORT(1, 1);
writel_relaxed(value, priv->io_base + _REG(VPU_WRARB_MODE_L2C1));
}
struct meson_drm_soc_attr {
struct meson_drm_soc_limits limits;
const struct soc_device_attribute *attrs;
};
static const struct meson_drm_soc_attr meson_drm_soc_attrs[] = {
/* S805X/S805Y HDMI PLL won't lock for HDMI PHY freq > 1,65GHz */
{
.limits = {
.max_hdmi_phy_freq = 1650000,
},
.attrs = (const struct soc_device_attribute []) {
{ .soc_id = "GXL (S805*)", },
{ /* sentinel */ }
}
},
};
static int meson_drv_bind_master(struct device *dev, bool has_components)
{
struct platform_device *pdev = to_platform_device(dev);
const struct meson_drm_match_data *match;
struct meson_drm *priv;
struct drm_device *drm;
struct resource *res;
void __iomem *regs;
int ret, i;
/* Checks if an output connector is available */
if (!meson_vpu_has_available_connectors(dev)) {
dev_err(dev, "No output connector available\n");
return -ENODEV;
}
match = of_device_get_match_data(dev);
if (!match)
return -ENODEV;
drm = drm_dev_alloc(&meson_driver, dev);
if (IS_ERR(drm))
return PTR_ERR(drm);
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto free_drm;
}
drm->dev_private = priv;
priv->drm = drm;
priv->dev = dev;
priv->compat = match->compat;
priv->afbcd.ops = match->afbcd_ops;
regs = devm_platform_ioremap_resource_byname(pdev, "vpu");
if (IS_ERR(regs)) {
ret = PTR_ERR(regs);
goto free_drm;
}
priv->io_base = regs;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hhi");
if (!res) {
ret = -EINVAL;
goto free_drm;
}
/* Simply ioremap since it may be a shared register zone */
regs = devm_ioremap(dev, res->start, resource_size(res));
if (!regs) {
ret = -EADDRNOTAVAIL;
goto free_drm;
}
priv->hhi = devm_regmap_init_mmio(dev, regs,
&meson_regmap_config);
if (IS_ERR(priv->hhi)) {
dev_err(&pdev->dev, "Couldn't create the HHI regmap\n");
ret = PTR_ERR(priv->hhi);
goto free_drm;
}
priv->canvas = meson_canvas_get(dev);
if (IS_ERR(priv->canvas)) {
ret = PTR_ERR(priv->canvas);
goto free_drm;
}
ret = meson_canvas_alloc(priv->canvas, &priv->canvas_id_osd1);
if (ret)
goto free_drm;
ret = meson_canvas_alloc(priv->canvas, &priv->canvas_id_vd1_0);
if (ret) {
meson_canvas_free(priv->canvas, priv->canvas_id_osd1);
goto free_drm;
}
ret = meson_canvas_alloc(priv->canvas, &priv->canvas_id_vd1_1);
if (ret) {
meson_canvas_free(priv->canvas, priv->canvas_id_osd1);
meson_canvas_free(priv->canvas, priv->canvas_id_vd1_0);
goto free_drm;
}
ret = meson_canvas_alloc(priv->canvas, &priv->canvas_id_vd1_2);
if (ret) {
meson_canvas_free(priv->canvas, priv->canvas_id_osd1);
meson_canvas_free(priv->canvas, priv->canvas_id_vd1_0);
meson_canvas_free(priv->canvas, priv->canvas_id_vd1_1);
goto free_drm;
}
priv->vsync_irq = platform_get_irq(pdev, 0);
ret = drm_vblank_init(drm, 1);
if (ret)
goto free_drm;
/* Assign limits per soc revision/package */
for (i = 0 ; i < ARRAY_SIZE(meson_drm_soc_attrs) ; ++i) {
if (soc_device_match(meson_drm_soc_attrs[i].attrs)) {
priv->limits = &meson_drm_soc_attrs[i].limits;
break;
}
}
/*
* Remove early framebuffers (ie. simplefb). The framebuffer can be
* located anywhere in RAM
*/
ret = drm_aperture_remove_framebuffers(false, &meson_driver);
if (ret)
goto free_drm;
ret = drmm_mode_config_init(drm);
if (ret)
goto free_drm;
drm->mode_config.max_width = 3840;
drm->mode_config.max_height = 2160;
drm->mode_config.funcs = &meson_mode_config_funcs;
drm->mode_config.helper_private = &meson_mode_config_helpers;
/* Hardware Initialization */
meson_vpu_init(priv);
meson_venc_init(priv);
meson_vpp_init(priv);
meson_viu_init(priv);
if (priv->afbcd.ops) {
ret = priv->afbcd.ops->init(priv);
if (ret)
goto free_drm;
}
/* Encoder Initialization */
ret = meson_encoder_cvbs_init(priv);
if (ret)
goto exit_afbcd;
if (has_components) {
ret = component_bind_all(drm->dev, drm);
if (ret) {
dev_err(drm->dev, "Couldn't bind all components\n");
goto exit_afbcd;
}
}
ret = meson_encoder_hdmi_init(priv);
if (ret)
goto exit_afbcd;
ret = meson_plane_create(priv);
if (ret)
goto exit_afbcd;
ret = meson_overlay_create(priv);
if (ret)
goto exit_afbcd;
ret = meson_crtc_create(priv);
if (ret)
goto exit_afbcd;
ret = request_irq(priv->vsync_irq, meson_irq, 0, drm->driver->name, drm);
if (ret)
goto exit_afbcd;
drm_mode_config_reset(drm);
drm_kms_helper_poll_init(drm);
platform_set_drvdata(pdev, priv);
ret = drm_dev_register(drm, 0);
if (ret)
goto uninstall_irq;
drm_fbdev_generic_setup(drm, 32);
return 0;
uninstall_irq:
free_irq(priv->vsync_irq, drm);
exit_afbcd:
if (priv->afbcd.ops)
priv->afbcd.ops->exit(priv);
free_drm:
drm_dev_put(drm);
return ret;
}
static int meson_drv_bind(struct device *dev)
{
return meson_drv_bind_master(dev, true);
}
static void meson_drv_unbind(struct device *dev)
{
struct meson_drm *priv = dev_get_drvdata(dev);
struct drm_device *drm = priv->drm;
if (priv->canvas) {
meson_canvas_free(priv->canvas, priv->canvas_id_osd1);
meson_canvas_free(priv->canvas, priv->canvas_id_vd1_0);
meson_canvas_free(priv->canvas, priv->canvas_id_vd1_1);
meson_canvas_free(priv->canvas, priv->canvas_id_vd1_2);
}
drm_dev_unregister(drm);
drm_kms_helper_poll_fini(drm);
drm_atomic_helper_shutdown(drm);
component_unbind_all(dev, drm);
free_irq(priv->vsync_irq, drm);
drm_dev_put(drm);
if (priv->afbcd.ops)
priv->afbcd.ops->exit(priv);
}
static const struct component_master_ops meson_drv_master_ops = {
.bind = meson_drv_bind,
.unbind = meson_drv_unbind,
};
static int __maybe_unused meson_drv_pm_suspend(struct device *dev)
{
struct meson_drm *priv = dev_get_drvdata(dev);
if (!priv)
return 0;
return drm_mode_config_helper_suspend(priv->drm);
}
static int __maybe_unused meson_drv_pm_resume(struct device *dev)
{
struct meson_drm *priv = dev_get_drvdata(dev);
if (!priv)
return 0;
meson_vpu_init(priv);
meson_venc_init(priv);
meson_vpp_init(priv);
meson_viu_init(priv);
if (priv->afbcd.ops)
priv->afbcd.ops->init(priv);
return drm_mode_config_helper_resume(priv->drm);
}
static void meson_drv_shutdown(struct platform_device *pdev)
{
struct meson_drm *priv = dev_get_drvdata(&pdev->dev);
if (!priv)
return;
drm_kms_helper_poll_fini(priv->drm);
drm_atomic_helper_shutdown(priv->drm);
}
/* Possible connectors nodes to ignore */
static const struct of_device_id connectors_match[] = {
{ .compatible = "composite-video-connector" },
{ .compatible = "svideo-connector" },
{}
};
static int meson_drv_probe(struct platform_device *pdev)
{
struct component_match *match = NULL;
struct device_node *np = pdev->dev.of_node;
struct device_node *ep, *remote;
int count = 0;
for_each_endpoint_of_node(np, ep) {
remote = of_graph_get_remote_port_parent(ep);
if (!remote || !of_device_is_available(remote)) {
of_node_put(remote);
continue;
}
/* If an analog connector is detected, count it as an output */
if (of_match_node(connectors_match, remote)) {
++count;
of_node_put(remote);
continue;
}
dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
np, remote, dev_name(&pdev->dev));
component_match_add(&pdev->dev, &match, component_compare_of, remote);
of_node_put(remote);
++count;
}
if (count && !match)
return meson_drv_bind_master(&pdev->dev, false);
/* If some endpoints were found, initialize the nodes */
if (count) {
dev_info(&pdev->dev, "Queued %d outputs on vpu\n", count);
return component_master_add_with_match(&pdev->dev,
&meson_drv_master_ops,
match);
}
/* If no output endpoints were available, simply bail out */
return 0;
};
static struct meson_drm_match_data meson_drm_gxbb_data = {
.compat = VPU_COMPATIBLE_GXBB,
};
static struct meson_drm_match_data meson_drm_gxl_data = {
.compat = VPU_COMPATIBLE_GXL,
};
static struct meson_drm_match_data meson_drm_gxm_data = {
.compat = VPU_COMPATIBLE_GXM,
.afbcd_ops = &meson_afbcd_gxm_ops,
};
static struct meson_drm_match_data meson_drm_g12a_data = {
.compat = VPU_COMPATIBLE_G12A,
.afbcd_ops = &meson_afbcd_g12a_ops,
};
static const struct of_device_id dt_match[] = {
{ .compatible = "amlogic,meson-gxbb-vpu",
.data = (void *)&meson_drm_gxbb_data },
{ .compatible = "amlogic,meson-gxl-vpu",
.data = (void *)&meson_drm_gxl_data },
{ .compatible = "amlogic,meson-gxm-vpu",
.data = (void *)&meson_drm_gxm_data },
{ .compatible = "amlogic,meson-g12a-vpu",
.data = (void *)&meson_drm_g12a_data },
{}
};
MODULE_DEVICE_TABLE(of, dt_match);
static const struct dev_pm_ops meson_drv_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(meson_drv_pm_suspend, meson_drv_pm_resume)
};
static struct platform_driver meson_drm_platform_driver = {
.probe = meson_drv_probe,
.shutdown = meson_drv_shutdown,
.driver = {
.name = "meson-drm",
.of_match_table = dt_match,
.pm = &meson_drv_pm_ops,
},
};
drm_module_platform_driver(meson_drm_platform_driver);
MODULE_AUTHOR("Jasper St. Pierre <jstpierre@mecheye.net>");
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");