724ba67515
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
153 lines
2.5 KiB
Text
153 lines
2.5 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright 2022 Toradex
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include "imx6dl.dtsi"
|
|
#include "imx6qdl-colibri.dtsi"
|
|
|
|
/ {
|
|
model = "Toradex Colibri iMX6DL/S on Colibri Iris Board";
|
|
compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl",
|
|
"fsl,imx6dl";
|
|
|
|
aliases {
|
|
i2c0 = &i2c2;
|
|
i2c1 = &i2c3;
|
|
};
|
|
|
|
aliases {
|
|
rtc0 = &rtc_i2c;
|
|
rtc1 = &snvs_rtc;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
};
|
|
|
|
/* Colibri SSP */
|
|
&ecspi4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>;
|
|
|
|
/*
|
|
* uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one
|
|
* wants to turn the transceiver off, that property has to be deleted
|
|
* and the gpio handled in userspace.
|
|
* The same applies to uart-b-c-on-x14-enable where the UART_B and
|
|
* UART_C transceiver is turned on.
|
|
*/
|
|
uart-a-on-x13-enable-hog {
|
|
gpio-hog;
|
|
gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
|
|
output-high;
|
|
};
|
|
|
|
uart-b-c-on-x14-enable-hog {
|
|
gpio-hog;
|
|
gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
|
|
*/
|
|
&i2c3 {
|
|
status = "okay";
|
|
|
|
rtc_i2c: rtc@68 {
|
|
compatible = "st,m41t0";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&pinctrl_gpio_iris
|
|
&pinctrl_usbh_oc_1
|
|
&pinctrl_usbc_id_1
|
|
>;
|
|
|
|
pinctrl_gpio_iris: gpioirisgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
|
|
MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0
|
|
MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0
|
|
MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0
|
|
MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0
|
|
MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0
|
|
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
|
|
MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1_forceoff: uart1forceoffgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart23_forceoff: uart23forceoffgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
|
|
>;
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm4 {
|
|
status = "okay";
|
|
};
|
|
|
|
®_usb_host_vbus {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri MMC */
|
|
&usdhc1 {
|
|
status = "okay";
|
|
};
|