niansa-misc/linux
1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
Code Issues Projects Releases Packages Wiki Activity
linux/arch/arm64/boot/dts/qcom
History
Zhen Lei e3389b0a14 arm64: dts: qcom: clear the warnings caused by empty dma-ranges 
The scripts/dtc/checks.c requires that the node have empty "dma-ranges"
property must have the same "#address-cells" and "#size-cells" values as
the parent node. Otherwise, the following warnings is reported:

arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \
(dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \
its #address-cells (1) differs from / (2)
arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \
(dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \
its #size-cells (1) differs from / (2)

Arnd Bergmann figured out why it's necessary:
Also note that the #address-cells=<1> means that any device under
this bus is assumed to only support 32-bit addressing, and DMA will
have to go through a slow swiotlb in the absence of an IOMMU.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201016090833.1892-3-thunder.leizhen@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-17 15:08:51 +01:00
..
apq8016-sbc.dts treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
apq8016-sbc.dtsi arm64: dts: qcom: msm8916: Configure DSI port with labels 2020-09-15 15:31:08 +00:00
apq8096-db820c.dts treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
apq8096-db820c.dtsi ARM: DT changes for v5.8 2020-06-04 20:02:14 -07:00
apq8096-ifc6640.dts arm64: dts: qcom: msm8996: Introduce IFC6640 2019-12-26 16:24:10 -08:00
ipq6018-cp01-c1.dts arm64: dts: qcom: replace status value "ok" by "okay" 2020-09-13 23:55:34 +00:00
ipq6018.dtsi arm64: dts: qcom: clear the warnings caused by empty dma-ranges 2020-11-17 15:08:51 +01:00
ipq8074-hk01.dts arm64: dts: qcom: replace status value "ok" by "okay" 2020-09-13 23:55:34 +00:00
ipq8074.dtsi arm64: dts: ipq8074: Use the A53 PMU compatible 2020-09-13 23:56:30 +00:00
Makefile arm64: dts: qcom: Makefile: Sort lines 2020-09-15 15:41:50 +00:00
msm8916-longcheer-l8150.dts arm64: dts: qcom: msm8916: Move common USB properties to msm8916.dtsi 2020-09-15 04:51:36 +00:00
msm8916-mtp.dts treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
msm8916-mtp.dtsi arm64: dts: qcom: msm8916: Set default pinctrl for blsp1_uart1/2 2020-09-15 04:51:29 +00:00
msm8916-pins.dtsi arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c 2020-07-15 22:00:51 -07:00
msm8916-pm8916.dtsi arm64: dts: qcom: msm8916: Move more supplies to msm8916-pm8916.dtsi 2020-09-15 04:51:13 +00:00
msm8916-samsung-a3u-eur.dts arm64: dts: qcom: msm8916: Configure DSI port with labels 2020-09-15 15:31:08 +00:00
msm8916-samsung-a5u-eur.dts arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer 2020-07-15 22:00:53 -07:00
msm8916-samsung-a2015-common.dtsi arm64: dts: qcom: msm8916: Use more generic node names 2020-09-15 15:40:06 +00:00
msm8916.dtsi arm64: dts: qcom: msm8916: Sort nodes 2020-09-15 15:40:56 +00:00
msm8992-bullhead-rev-101.dts arm64: dts: qcom: bullhead: Move UART pinctrl to SoC 2020-07-27 23:43:04 -07:00
msm8992-msft-lumia-talkman.dts arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree 2020-07-27 23:46:29 -07:00
msm8992-xiaomi-libra.dts arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree 2020-07-27 23:46:19 -07:00
msm8992.dtsi arm64: dts: qcom: msm8992: Fix UART interrupt property 2020-08-30 17:21:11 +00:00
msm8994-angler-rev-101.dts arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id 2020-06-23 16:22:59 -07:00
msm8994-sony-xperia-kitakami-sumire.dts arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) 2020-07-27 23:41:23 -07:00
msm8994-sony-xperia-kitakami.dtsi arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 2020-09-14 23:32:00 +00:00
msm8994.dtsi arm64: dts: qcom: msm8994: Add support for SMD RPM 2020-07-27 23:36:51 -07:00
msm8996-mtp.dts treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
msm8996-mtp.dtsi treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
msm8996-pins.dtsi treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
msm8996.dtsi arm64: dts: qcom: msm8996: Add VFE1_GDSC power domain to camss node 2020-09-15 15:05:55 +00:00
msm8998-asus-novago-tp370ql.dts arm64: dts: qcom: Add Asus NovaGo TP370QL 2019-07-22 16:33:14 -07:00
msm8998-clamshell.dtsi arm64: dts: qcom: msm8998-clamshell: Fix label on l15 regulator 2020-06-20 23:47:03 -07:00
msm8998-hp-envy-x2.dts arm64: dts: qcom: Add HP Envy x2 2019-07-22 16:33:06 -07:00
msm8998-lenovo-miix-630.dts arm64: dts: qcom: lenovo630: Add Modem firmware files 2020-06-20 23:47:03 -07:00
msm8998-mtp.dts arm64: dts: Add msm8998 SoC and MTP board support 2018-09-13 13:45:48 -05:00
msm8998-mtp.dtsi arm64: dts: qcom: msm8998-mtp: Fix label on l15 regulator 2020-06-20 23:47:03 -07:00
msm8998-pins.dtsi arm64: dts: qcom: msm8998: Fixup uart3 gpio config for bluetooth 2019-12-17 21:26:58 -08:00
msm8998.dtsi arm64: dts: qcom: msm8998: remove unit name for thermal trip points 2020-04-13 22:05:22 -07:00
pm660.dtsi arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells 2020-09-14 23:32:18 +00:00
pm660l.dtsi arm64: dts: qcom: pm660(l): Add base dts files 2020-06-23 00:28:49 -07:00
pm6150.dtsi arm64: dts: qcom: pm6150: Add label to pwrkey node 2020-02-24 20:52:23 -08:00
pm6150l.dtsi arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals 2019-12-10 09:41:58 -08:00
pm8004.dtsi arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids 2020-01-03 12:56:36 -08:00
pm8005.dtsi arm64: dts: qcom: pm8005: add gpio-ranges 2019-04-18 23:09:45 -05:00
pm8009.dtsi arm64: dts: qcom: pm8009: Add base dts file 2020-06-21 12:31:54 -07:00
pm8150.dtsi arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones 2020-06-21 12:31:59 -07:00
pm8150b.dtsi arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones 2020-06-21 12:31:59 -07:00
pm8150l.dtsi arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones 2020-06-21 12:31:59 -07:00
pm8916.dtsi arm64: dts: qcom: pm8916: Sort nodes 2020-09-15 15:41:16 +00:00
pm8994.dtsi arm64: dts: apq8096-db820c: Fix VDD core voltage 2020-01-07 15:27:57 -08:00
pm8998.dtsi arm64: dts: qcom: sdm845: Disable pwrkey on Cheza 2020-02-11 22:14:10 -08:00
pmi8994.dtsi arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc 2020-05-14 17:09:41 -07:00
pmi8998.dtsi arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators 2020-07-18 22:37:33 -07:00
pms405.dtsi arm64: dts: qcom: pms405: remove reduandant properties 2019-08-05 14:48:57 -07:00
qcs404-evb-1000.dts arm64: dts: qcom: qcs404-evb: Change the compatible to distinguish platforms 2019-04-18 23:09:47 -05:00
qcs404-evb-4000.dts arm64: dts: qcom: replace status value "ok" by "okay" 2020-09-13 23:55:34 +00:00
qcs404-evb.dtsi arm64: dts: qcom: replace status value "ok" by "okay" 2020-09-13 23:55:34 +00:00
qcs404.dtsi arm64: dts: qcom: qcs404: Add IMEM and PIL info region 2020-07-01 22:10:44 -07:00
qrb5165-rb5.dts arm64: dts: qcom: qrb5165-rb5: Add gpio-line-names for PM8150(B&L) 2020-09-10 16:40:43 +00:00
sc7180-idp.dts arm64: dts: qcom: sc7180: Add wakeup support for BT UART on sc7180-idp 2020-09-15 00:15:15 +00:00
sc7180-trogdor-lazor-r0.dts arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt 2020-08-31 18:10:03 +00:00
sc7180-trogdor-lazor-r1-kb.dts arm64: dts: qcom: Add sc7180-lazor sku2 2020-09-13 23:53:43 +00:00
sc7180-trogdor-lazor-r1-lte.dts arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt 2020-08-31 18:10:03 +00:00
sc7180-trogdor-lazor-r1.dts arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt 2020-08-31 18:10:03 +00:00
sc7180-trogdor-lazor.dtsi arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt 2020-08-31 18:10:03 +00:00
sc7180-trogdor-lte-sku.dtsi arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt 2020-08-31 18:10:03 +00:00
sc7180-trogdor-r1-lte.dts arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt 2020-08-31 18:10:03 +00:00
sc7180-trogdor-r1.dts arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt 2020-08-31 18:10:03 +00:00
sc7180-trogdor.dtsi arm64: dts: qcom: sc7180-trogdor: Add wakeup support for BT UART 2020-09-15 00:15:26 +00:00
sc7180.dtsi arm64: dts: qcom: sc7180: Increase the number of interconnect cells 2020-09-15 22:33:53 +00:00
sdm630-sony-xperia-ganges-kirin.dts arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform) 2020-06-23 00:29:00 -07:00
sdm630-sony-xperia-ganges.dtsi arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform) 2020-06-23 00:29:00 -07:00
sdm630-sony-xperia-nile-discovery.dts arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) 2020-06-23 00:28:59 -07:00
sdm630-sony-xperia-nile-pioneer.dts arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) 2020-06-23 00:28:59 -07:00
sdm630-sony-xperia-nile-voyager.dts arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) 2020-06-23 00:28:59 -07:00
sdm630-sony-xperia-nile.dtsi arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) 2020-06-23 00:28:59 -07:00
sdm630.dtsi arm64: dts: sdm630: Temporarily disable SMMUs by default 2020-09-14 23:30:56 +00:00
sdm636-sony-xperia-ganges-mermaid.dts arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform) 2020-06-23 00:29:00 -07:00
sdm660-xiaomi-lavender.dts arm64: dts: qcom: Add Xiaomi Redmi Note 7 (lavender) 2020-04-22 20:50:04 -07:00
sdm660.dtsi arm64: dts: qcom: Add SDM660 SoC support 2020-04-22 20:47:48 -07:00
sdm845-cheza-r1.dts arm64: dts: qcom: sdm845-cheza: add initial cheza dt 2019-06-25 13:33:15 -05:00
sdm845-cheza-r2.dts arm64: dts: qcom: sdm845-cheza: add initial cheza dt 2019-06-25 13:33:15 -05:00
sdm845-cheza-r3.dts arm64: dts: qcom: sdm845-cheza: add initial cheza dt 2019-06-25 13:33:15 -05:00
sdm845-cheza.dtsi arm64: dts: qcom: sc7180: Drop the unused non-MSA SID 2020-07-08 12:19:35 -07:00
sdm845-db845c.dts arm64: dts: qcom: replace status value "ok" by "okay" 2020-09-13 23:55:34 +00:00
sdm845-mtp.dts arm64: dts: qcom: sdm845: Add SoC compatible to MTP 2020-05-06 11:19:51 -07:00
sdm845-xiaomi-beryllium.dts arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium) 2020-09-12 23:26:18 +00:00
sdm845.dtsi ARM: Devicetree updates 2020-10-24 10:44:18 -07:00
sdm850-lenovo-yoga-c630.dts ARM: DT changes for v5.8 2020-06-04 20:02:14 -07:00
sm8150-mtp.dts arm64: dts: qcom: sm8150: Add USB and PHY device nodes 2020-06-21 00:19:50 -07:00
sm8150.dtsi arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider 2020-09-15 23:44:18 +00:00
sm8250-mtp.dts arm64: dts: qcom: sm8250-mtp: add i2c device tree nodes 2020-09-13 23:49:57 +00:00
sm8250.dtsi arm64: dts: qcom: sm8250: Add thermal zones and throttling support 2020-09-24 03:06:48 +00:00