.. |
aks-cdu.dts
|
|
|
alphascale-asm9260-devkit.dts
|
|
|
alphascale-asm9260.dtsi
|
|
|
alpine-db.dts
|
|
|
alpine.dtsi
|
ARM: dts: alpine: align UART node name with bindings
|
2023-01-26 11:21:19 +01:00 |
am33xx-clocks.dtsi
|
ARM: dts: Use clock-output-names for am3
|
2022-04-11 16:03:33 +03:00 |
am33xx-l4.dtsi
|
ARM: dts: am33xx: Fix MMCHS0 dma properties
|
2022-07-04 09:24:46 +03:00 |
am33xx.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
am35xx-clocks.dtsi
|
ARM: dts: Group omap3 CM_ICLKEN1_CORE clocks
|
2022-05-03 09:15:42 +03:00 |
am43x-epos-evm.dts
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
am43xx-clocks.dtsi
|
ARM: dts: Use clock-output-names for am4
|
2022-04-11 16:03:33 +03:00 |
am57-pruss.dtsi
|
ARM: dts: am57xx: Add PRUSS MDIO controller nodes
|
2021-08-03 15:25:14 +03:00 |
am57xx-beagle-x15-common.dtsi
|
ARM: dts: am57xx: Add PRUSS MDIO controller nodes
|
2021-08-03 15:25:14 +03:00 |
am57xx-beagle-x15-revb1.dts
|
|
|
am57xx-beagle-x15-revc.dts
|
|
|
am57xx-beagle-x15.dts
|
|
|
am57xx-cl-som-am57x.dts
|
ARM: dts: omap: align SPI NOR node name with dtschema
|
2022-04-20 11:06:07 +02:00 |
am57xx-commercial-grade.dtsi
|
|
|
am57xx-evm.dtso
|
ARM: dts: ti: Add AM57xx GP EVM board support
|
2023-03-27 11:07:04 +03:00 |
am57xx-idk-common.dtsi
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
am57xx-idk-lcd-osd101t2045.dtso
|
ARM: dts: am57xx-idk: Add IDK displays and touchscreens
|
2023-03-27 11:07:13 +03:00 |
am57xx-idk-lcd-osd101t2587.dtso
|
ARM: dts: am57xx-idk: Add IDK displays and touchscreens
|
2023-03-27 11:07:13 +03:00 |
am57xx-industrial-grade.dtsi
|
|
|
am57xx-sbc-am57x.dts
|
|
|
am335x-baltos-ir2110.dts
|
ARM: dts: am335x-baltos: add GPIO names for ir2110 device
|
2022-09-07 08:18:43 +03:00 |
am335x-baltos-ir3220.dts
|
ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices
|
2022-09-07 08:18:42 +03:00 |
am335x-baltos-ir5221.dts
|
ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices
|
2022-09-07 08:18:42 +03:00 |
am335x-baltos-leds.dtsi
|
ARM: dts: am335x: align LED node names with dtschema
|
2022-12-01 18:03:15 +01:00 |
am335x-baltos.dtsi
|
ARM: dts: am335x-baltos: change nand-xfer-type
|
2022-09-07 08:15:23 +03:00 |
am335x-base0033.dts
|
|
|
am335x-bone-common.dtsi
|
ARM: dts: am33xx: Add i2c voltage scaling firmware to wkup_m3_ipc
|
2022-05-03 09:13:56 +03:00 |
am335x-bone.dts
|
|
|
am335x-boneblack-common.dtsi
|
ARM: dts: am335x-boneblack-common: move system-power-controller
|
2021-12-09 10:06:41 +02:00 |
am335x-boneblack-hdmi.dtsi
|
ARM: dts: am335x: Fix TDA998x ports addressing
|
2022-11-22 09:17:03 +02:00 |
am335x-boneblack-wireless.dts
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
am335x-boneblack.dts
|
ARM: dts: am33xx: Map baseboard EEPROM on BeagleBone Black
|
2022-06-27 13:56:06 +03:00 |
am335x-boneblue.dts
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
am335x-bonegreen-common.dtsi
|
|
|
am335x-bonegreen-wireless.dts
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
am335x-bonegreen.dts
|
|
|
am335x-chiliboard.dts
|
ARM: dts: am335x-chiliboard: switch to new cpsw switch drv
|
2021-08-06 09:25:33 +03:00 |
am335x-chilisom.dtsi
|
|
|
am335x-cm-t335.dts
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
am335x-evm.dts
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
am335x-evmsk.dts
|
ARM: dts: am335x: drop panel endpoint unit address
|
2022-10-17 17:46:57 -04:00 |
am335x-guardian.dts
|
ARM: dts: Unify pwm-omap-dmtimer node names
|
2022-11-22 14:15:09 +02:00 |
am335x-icev2.dts
|
ARM: dts: am335x-icev2: Add system-power-controller to RTC node
|
2021-12-09 10:06:41 +02:00 |
am335x-igep0033.dtsi
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
am335x-lxm.dts
|
ARM: dts: am335x-lxm: switch to new cpsw switch drv
|
2021-08-06 09:25:35 +03:00 |
am335x-moxa-uc-2100-common.dtsi
|
ARM: dts: ti: correct indentation
|
2022-10-26 12:52:24 -04:00 |
am335x-moxa-uc-2101.dts
|
ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv
|
2021-08-06 09:25:35 +03:00 |
am335x-moxa-uc-8100-common.dtsi
|
ARM: dts: ti: correct indentation
|
2022-10-26 12:52:24 -04:00 |
am335x-moxa-uc-8100-me-t.dts
|
|
|
am335x-myirtech-myc.dtsi
|
ARM: dts: am335x-myirtech: Update NAND default partition table layout
|
2022-04-29 10:10:35 +03:00 |
am335x-myirtech-myd.dts
|
ARM: dts: am335x: Fix TDA998x ports addressing
|
2022-11-22 09:17:03 +02:00 |
am335x-nano.dts
|
ARM: dts: am335x-nano: Enable USB host
|
2023-01-19 10:31:15 +02:00 |
am335x-netcan-plus-1xx.dts
|
ARM: dts: am335x-netcan: add GPIO names for NetCAN Plus device
|
2022-09-07 08:18:43 +03:00 |
am335x-netcom-plus-2xx.dts
|
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 2-port devices
|
2022-09-07 08:18:45 +03:00 |
am335x-netcom-plus-8xx.dts
|
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 8-port devices
|
2022-09-07 08:18:44 +03:00 |
am335x-osd335x-common.dtsi
|
|
|
am335x-osd3358-sm-red.dts
|
ARM: dts: am335x: Use correct vendor prefix for Asahi Kasei Corp.
|
2021-12-09 10:06:42 +02:00 |
am335x-pcm-953.dtsi
|
ARM: dts: am335x-pcm-953: Remove superseded/invalid LED trigger.
|
2023-03-27 11:17:45 +03:00 |
am335x-pdu001.dts
|
ARM: dts: am334x: pdu001: Use correct node name for RTC
|
2022-02-18 10:20:44 +02:00 |
am335x-pepper.dts
|
ARM: dts: ti: correct indentation
|
2022-10-26 12:52:24 -04:00 |
am335x-phycore-rdk.dts
|
|
|
am335x-phycore-som.dtsi
|
ARM: dts: am335x-phycore-som: Remove superseded/invalid GPMC NAND type.
|
2023-03-27 11:17:50 +03:00 |
am335x-pocketbeagle.dts
|
ARM: dts: am335x: align LED node names with dtschema
|
2022-12-01 18:03:15 +01:00 |
am335x-regor-rdk.dts
|
|
|
am335x-regor.dtsi
|
ARM: dts: am335x-regor: Remove underscore in node names.
|
2023-03-27 11:17:35 +03:00 |
am335x-sancloud-bbe-common.dtsi
|
ARM: dts: am335x-sancloud-bbe: Drop usb wifi comment
|
2021-08-10 09:52:41 +03:00 |
am335x-sancloud-bbe-extended-wifi.dts
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
am335x-sancloud-bbe-lite.dts
|
ARM: dts: am335x-sancloud-bbe-lite: New devicetree
|
2021-07-27 11:53:01 +03:00 |
am335x-sancloud-bbe.dts
|
ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs
|
2021-08-10 09:52:35 +03:00 |
am335x-sbc-t335.dts
|
|
|
am335x-shc.dts
|
ARM: dts: omap: align gpio-key node names with dtschema
|
2022-06-27 10:48:27 +02:00 |
am335x-sl50.dts
|
ARM: dts: omap: align SPI NOR node name with dtschema
|
2022-04-20 11:06:07 +02:00 |
am335x-wega-rdk.dts
|
|
|
am335x-wega.dtsi
|
ARM: dts: am335x-wega: Change node name of sound card, remove underscores.
|
2023-03-27 11:17:27 +03:00 |
am437x-cm-t43.dts
|
ARM: dts: omap: align SPI NOR node name with dtschema
|
2022-04-20 11:06:07 +02:00 |
am437x-gp-evm.dts
|
ARM: dts: am43xx: Add i2c voltage scaling firmware to wkup_m3_ipc
|
2022-05-03 09:13:57 +03:00 |
am437x-idk-evm.dts
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
am437x-l4.dtsi
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
am437x-sbc-t43.dts
|
|
|
am437x-sk-evm.dts
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
am571x-idk-touchscreen.dtso
|
ARM: dts: am57xx-idk: Add IDK displays and touchscreens
|
2023-03-27 11:07:13 +03:00 |
am571x-idk.dts
|
ARM: dts: am57xx: Add PRUSS MDIO controller nodes
|
2021-08-03 15:25:14 +03:00 |
am572x-idk-common.dtsi
|
|
|
am572x-idk-touchscreen.dtso
|
ARM: dts: am57xx-idk: Add IDK displays and touchscreens
|
2023-03-27 11:07:13 +03:00 |
am572x-idk.dts
|
ARM: dts: am57xx: Add PRUSS MDIO controller nodes
|
2021-08-03 15:25:14 +03:00 |
am574x-idk.dts
|
ARM: dts: omap: align SPI NOR node name with dtschema
|
2022-04-20 11:06:07 +02:00 |
am3517-craneboard.dts
|
|
|
am3517-evm-ui.dtsi
|
ARM: dts: omap: align gpio-key node names with dtschema
|
2022-06-27 10:48:27 +02:00 |
am3517-evm.dts
|
Devicetree fixes for omaps for v6.2
|
2022-11-30 15:03:16 +01:00 |
am3517-som.dtsi
|
ARM: dts: am3517-evm: Fix misc pinmuxing
|
2022-04-14 11:38:44 +03:00 |
am3517.dtsi
|
ARM: dts: Update omap3 musb to probe with ti-sysc
|
2022-11-22 13:25:18 +02:00 |
am3517_mt_ventoux.dts
|
|
|
am3703.dtsi
|
|
|
am3715.dtsi
|
|
|
am3874-iceboard.dts
|
ARM: dts: ti: Fix pca954x i2c-mux node names
|
2023-01-19 10:17:54 +02:00 |
am4372.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
am5718.dtsi
|
ARM: dts: dra7: Fix duplicate USB4 target module node
|
2021-06-11 08:30:42 +03:00 |
am5728.dtsi
|
|
|
am5729-beagleboneai.dts
|
|
|
am5748.dtsi
|
ARM: dts: am5748: keep usb4_tm disabled
|
2022-09-06 09:44:30 +03:00 |
animeo_ip.dts
|
ARM: dts: animeo: correct gpio-keys properties
|
2022-06-20 13:12:50 +02:00 |
arm-realview-eb-11mp-bbrevd-ctrevb.dts
|
|
|
arm-realview-eb-11mp-bbrevd.dts
|
|
|
arm-realview-eb-11mp-ctrevb.dts
|
|
|
arm-realview-eb-11mp.dts
|
|
|
arm-realview-eb-a9mp-bbrevd.dts
|
|
|
arm-realview-eb-a9mp.dts
|
|
|
arm-realview-eb-bbrevd.dts
|
|
|
arm-realview-eb-bbrevd.dtsi
|
|
|
arm-realview-eb-mp.dtsi
|
|
|
arm-realview-eb.dts
|
|
|
arm-realview-eb.dtsi
|
ARM: dts: realview: Update spi clock-names property
|
2022-08-19 10:51:13 +02:00 |
arm-realview-pb11mp.dts
|
ARM: dts: realview: Update spi clock-names property
|
2022-08-19 10:51:13 +02:00 |
arm-realview-pb1176.dts
|
ARM: dts: realview: Update spi clock-names property
|
2022-08-19 10:51:13 +02:00 |
arm-realview-pba8.dts
|
|
|
arm-realview-pbx-a9.dts
|
|
|
arm-realview-pbx.dtsi
|
ARM: dts: realview: Update spi clock-names property
|
2022-08-19 10:51:13 +02:00 |
armada-38x-solidrun-microsom.dtsi
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-38x.dtsi
|
Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
|
2023-01-09 21:30:54 +01:00 |
armada-39x.dtsi
|
Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
|
2023-01-09 21:30:54 +01:00 |
armada-370-c200-v2.dts
|
ARM: dts: marvell: align gpio-key node names with dtschema
|
2022-06-27 10:43:13 +02:00 |
armada-370-db.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-370-dlink-dns327l.dts
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-370-mirabox.dts
|
|
|
armada-370-netgear-rn102.dts
|
ARM: dts: armada: correct indentation
|
2022-10-26 12:52:40 -04:00 |
armada-370-netgear-rn104.dts
|
ARM: dts: armada: correct indentation
|
2022-10-26 12:52:40 -04:00 |
armada-370-rd.dts
|
Networking changes for 6.4.
|
2023-04-26 16:07:23 -07:00 |
armada-370-seagate-nas-2bay.dts
|
|
|
armada-370-seagate-nas-4bay.dts
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-370-seagate-nas-xbay.dtsi
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-370-seagate-personal-cloud-2bay.dts
|
|
|
armada-370-seagate-personal-cloud.dts
|
|
|
armada-370-seagate-personal-cloud.dtsi
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-370-synology-ds213j.dts
|
ARM: dts: armada: correct indentation
|
2022-10-26 12:52:40 -04:00 |
armada-370-xp.dtsi
|
|
|
armada-370.dtsi
|
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
|
2022-11-28 00:55:14 +01:00 |
armada-375-db.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-375.dtsi
|
Networking changes for 6.2.
|
2022-12-13 15:47:48 -08:00 |
armada-380.dtsi
|
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
|
2022-11-28 00:55:14 +01:00 |
armada-381-netgear-gs110emx.dts
|
ARM: dts: armada: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
armada-382-rd-ac3x-48g4x2xl.dts
|
|
|
armada-385-atl-x530.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-385-clearfog-gtr-l8.dts
|
ARM: dts: armada: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
armada-385-clearfog-gtr-s4.dts
|
ARM: dts: armada: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
armada-385-clearfog-gtr.dtsi
|
ARM: dts: marvell: align gpio-key node names with dtschema
|
2022-06-27 10:43:13 +02:00 |
armada-385-db-88f6820-amc.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-385-db-ap.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-385-linksys-caiman.dts
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-385-linksys-cobra.dts
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-385-linksys-rango.dts
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-385-linksys-shelby.dts
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-385-linksys.dtsi
|
ARM: dts: armada: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
armada-385-synology-ds116.dts
|
ARM: dts: armada: align LED node names with dtschema
|
2022-11-28 01:15:51 +01:00 |
armada-385-turris-omnia.dts
|
ARM: dts: armada: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
armada-385.dtsi
|
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
|
2022-11-28 00:55:14 +01:00 |
armada-388-clearfog-base.dts
|
ARM: dts: marvell: align gpio-key node names with dtschema
|
2022-06-27 10:43:13 +02:00 |
armada-388-clearfog-pro.dts
|
|
|
armada-388-clearfog.dts
|
ARM: dts: marvell: align gpio-key node names with dtschema
|
2022-06-27 10:43:13 +02:00 |
armada-388-clearfog.dtsi
|
|
|
armada-388-db.dts
|
ARM: dts: marvell: use "okay" for status
|
2023-03-12 18:00:09 +01:00 |
armada-388-gp.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-388-helios4.dts
|
ARM: dts: armada388-helios4: assign pinctrl to each fan
|
2021-01-29 16:25:31 +01:00 |
armada-388-rd.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-388.dtsi
|
|
|
armada-390-db.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-390.dtsi
|
|
|
armada-395-gp.dts
|
|
|
armada-395.dtsi
|
|
|
armada-398-db.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-398.dtsi
|
|
|
armada-xp-98dx3236.dtsi
|
ARM: dts: armada-xp: add interrupts for watchdog
|
2022-11-28 01:22:12 +01:00 |
armada-xp-98dx3336.dtsi
|
|
|
armada-xp-98dx4251.dtsi
|
|
|
armada-xp-axpwifiap.dts
|
ARM: dts: marvell: correct gpio-keys properties
|
2022-06-27 10:43:31 +02:00 |
armada-xp-crs305-1g-4s-bit.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-crs305-1g-4s.dts
|
|
|
armada-xp-crs305-1g-4s.dtsi
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-crs326-24g-2s-bit.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-crs326-24g-2s.dts
|
|
|
armada-xp-crs326-24g-2s.dtsi
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-crs328-4c-20s-4s-bit.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-crs328-4c-20s-4s.dts
|
|
|
armada-xp-crs328-4c-20s-4s.dtsi
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-db-dxbc2.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-db-xc3-24g4xg.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-db.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-gp.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp-lenovo-ix4-300d.dts
|
ARM: dts: armada-xp: align SPI node name with dtschema
|
2022-09-02 16:10:04 +02:00 |
armada-xp-linksys-mamba.dts
|
ARM: dts: armada: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
armada-xp-matrix.dts
|
|
|
armada-xp-mv78230.dtsi
|
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
|
2022-11-28 00:55:14 +01:00 |
armada-xp-mv78260.dtsi
|
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
|
2022-11-28 00:55:14 +01:00 |
armada-xp-mv78460.dtsi
|
ARM: dts: armada-xp-mv78460.dtsi: Add definitions for PCIe legacy INTx interrupts
|
2022-09-02 16:50:25 +02:00 |
armada-xp-netgear-rn2120.dts
|
ARM: dts: armada: correct indentation
|
2022-10-26 12:52:40 -04:00 |
armada-xp-openblocks-ax3-4.dts
|
ARM: dts: marvell: correct gpio-keys properties
|
2022-06-27 10:43:31 +02:00 |
armada-xp-synology-ds414.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
armada-xp.dtsi
|
ARM: dts: armada-xp: add interrupts for watchdog
|
2022-11-28 01:22:12 +01:00 |
armv7-m.dtsi
|
|
|
artpec6-devboard.dts
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
artpec6.dtsi
|
|
|
aspeed-ast2500-evb.dts
|
ARM: dts: ast2500-evb: fix board compatible
|
2022-06-22 12:16:38 +02:00 |
aspeed-ast2600-evb-a1.dts
|
ARM: dts: aspeed: ast2600-evb-a1: Add compatible
|
2022-09-28 12:31:40 +09:30 |
aspeed-ast2600-evb.dts
|
ARM: dts: aspeed: ast2600evb: Fix compatible string
|
2022-09-28 12:31:40 +09:30 |
aspeed-bmc-amd-daytonax.dts
|
ARM: dts: aspeed: Add AMD DaytonaX BMC
|
2022-09-28 12:31:39 +09:30 |
aspeed-bmc-amd-ethanolx.dts
|
ARM: dts: aspeed: ethanolx: Add BIOS flash chip
|
2023-01-23 14:16:49 +10:30 |
aspeed-bmc-ampere-mtjade.dts
|
ARM: dts: aspeed: mtjade: Add SMPro nodes
|
2022-11-20 20:47:32 +10:30 |
aspeed-bmc-ampere-mtmitchell.dts
|
ARM: dts: aspeed: mtmitchell: Enable NCSI
|
2023-03-09 15:59:17 +10:30 |
aspeed-bmc-arm-stardragon4800-rep2.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-asrock-e3c246d4i.dts
|
ARM: dts: aspeed: asrock: Correct firmware flash SPI clocks
|
2023-03-06 11:23:18 +10:30 |
aspeed-bmc-asrock-romed8hm3.dts
|
ARM: dts: aspeed: asrock: Correct firmware flash SPI clocks
|
2023-03-06 11:23:18 +10:30 |
aspeed-bmc-bytedance-g220a.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-delta-ahe50dc.dts
|
ARM: dts: aspeed: Add Delta AHE-50DC BMC
|
2022-11-20 20:47:31 +10:30 |
aspeed-bmc-facebook-bletchley.dts
|
ARM: dts: aspeed: bletchley: Enable wdtrst1
|
2023-01-23 14:16:49 +10:30 |
aspeed-bmc-facebook-cloudripper.dts
|
ARM: dts: aspeed: align SPI node name with dtschema
|
2022-10-18 09:35:45 -04:00 |
aspeed-bmc-facebook-cmm.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-facebook-elbert.dts
|
ARM: dts: aspeed: align SPI node name with dtschema
|
2022-10-18 09:35:45 -04:00 |
aspeed-bmc-facebook-fuji.dts
|
ARM: dts: aspeed: align SPI node name with dtschema
|
2022-10-18 09:35:45 -04:00 |
aspeed-bmc-facebook-galaxy100.dts
|
ARM: dts: aspeed: galaxy100: Remove redundant ADC device
|
2021-07-19 09:53:49 +09:30 |
aspeed-bmc-facebook-greatlakes.dts
|
ARM: dts: aspeed: greatlakes: add mctp device
|
2023-04-13 16:41:54 +09:30 |
aspeed-bmc-facebook-minipack.dts
|
ARM: dts: aspeed: minipack: Update flash partition table
|
2021-08-16 11:41:54 +09:30 |
aspeed-bmc-facebook-tiogapass.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-facebook-wedge40.dts
|
ARM: dts: aspeed: wedge40: Remove redundant ADC device
|
2021-07-19 09:53:49 +09:30 |
aspeed-bmc-facebook-wedge100.dts
|
ARM: dts: aspeed: wedge100: Enable ADC channels
|
2021-07-19 09:53:50 +09:30 |
aspeed-bmc-facebook-wedge400.dts
|
ARM: dts: aspeed: align SPI node name with dtschema
|
2022-10-18 09:35:45 -04:00 |
aspeed-bmc-facebook-yamp.dts
|
|
|
aspeed-bmc-facebook-yosemitev2.dts
|
ARM: dts: aspeed: yosemitev2: Disable the EEPROM driver
|
2022-09-28 12:31:39 +09:30 |
aspeed-bmc-ibm-bonnell.dts
|
ARM: dts: aspeed: p10bmc: Change power supply info
|
2023-04-13 16:37:42 +09:30 |
aspeed-bmc-ibm-everest.dts
|
ARM: dts: aspeed: everest: Add reserved memory for TPM event log
|
2023-03-10 12:40:59 +10:30 |
aspeed-bmc-ibm-rainier-1s4u.dts
|
ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
|
2021-04-16 12:22:40 +09:30 |
aspeed-bmc-ibm-rainier-4u.dts
|
ARM: dts: aspeed: Rainier 4U: Remove fan updates
|
2021-06-04 16:11:21 +09:30 |
aspeed-bmc-ibm-rainier.dts
|
ARM: SoC fixes for 6.3, part 1
|
2023-02-27 10:09:40 -08:00 |
aspeed-bmc-inspur-fp5280g2.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-inspur-nf5280m6.dts
|
ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine
|
2021-07-19 09:39:55 +09:30 |
aspeed-bmc-inspur-on5263m5.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-intel-s2600wf.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-inventec-transformers.dts
|
ARM: dts: aspeed: Adding Inventec Transformers BMC
|
2021-10-21 16:56:03 +10:30 |
aspeed-bmc-lenovo-hr630.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-lenovo-hr855xg2.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-microsoft-olympus.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-opp-lanyang.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-opp-mowgli.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-opp-nicole.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-opp-palmetto.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-opp-romulus.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-opp-swift.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-opp-tacoma.dts
|
ARM: dts: aspeed: correct gpio-keys properties
|
2022-07-05 13:43:54 +02:00 |
aspeed-bmc-opp-vesnin.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-opp-witherspoon.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-opp-zaius.dts
|
ARM: dts: aspeed: align gpio-key node names with dtschema
|
2022-07-05 13:43:37 +02:00 |
aspeed-bmc-portwell-neptune.dts
|
ARM: dts: aspeed: adjust whitespace around '='
|
2022-06-16 13:44:48 -07:00 |
aspeed-bmc-qcom-dc-scm-v1.dts
|
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
|
2022-06-24 17:57:13 +02:00 |
aspeed-bmc-quanta-q71l.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-quanta-s6q.dts
|
ARM: dts: aspeed: adjust whitespace around '='
|
2022-06-16 13:44:48 -07:00 |
aspeed-bmc-supermicro-x11spi.dts
|
ARM: dts: aspeed: Set earlycon boot argument
|
2021-06-03 15:17:02 +09:30 |
aspeed-bmc-tyan-s7106.dts
|
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
|
2021-12-21 15:09:09 +10:30 |
aspeed-bmc-tyan-s8036.dts
|
arm: dts: aspeed: tyan s8036: Enable kcs interrupts
|
2023-01-27 10:40:59 +10:30 |
aspeed-bmc-ufispace-ncplite.dts
|
ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC
|
2023-01-27 10:41:00 +10:30 |
aspeed-bmc-vegman-n110.dts
|
ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC
|
2021-12-07 09:12:15 +10:30 |
aspeed-bmc-vegman-rx20.dts
|
ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC
|
2021-12-07 09:12:15 +10:30 |
aspeed-bmc-vegman-sx20.dts
|
ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC
|
2021-12-07 09:12:15 +10:30 |
aspeed-bmc-vegman.dtsi
|
ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC
|
2021-12-07 09:12:15 +10:30 |
aspeed-g4.dtsi
|
ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
|
2022-05-19 13:09:49 +09:30 |
aspeed-g5.dtsi
|
ARM: dts: aspeed: Add HACE device controller node
|
2022-08-26 18:50:38 +08:00 |
aspeed-g6-pinctrl.dtsi
|
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
|
2022-04-13 11:53:52 +09:30 |
aspeed-g6.dtsi
|
ARM: dts: aspeed-g6: Add UDMA node
|
2023-04-13 16:43:15 +09:30 |
ast2400-facebook-netbmc-common.dtsi
|
ARM: dts: aspeed: Enable ADC in Facebook AST2400 common dtsi
|
2021-07-19 09:53:49 +09:30 |
ast2500-facebook-netbmc-common.dtsi
|
|
|
ast2600-facebook-netbmc-common.dtsi
|
ARM: dts: aspeed: align SPI node name with dtschema
|
2022-10-18 09:35:45 -04:00 |
at91-ariag25.dts
|
|
|
at91-ariettag25.dts
|
|
|
at91-cosino.dtsi
|
|
|
at91-cosino_mega2560.dts
|
|
|
at91-dvk_som60.dts
|
|
|
at91-dvk_su60_somc.dtsi
|
ARM: dts: at91: align SPI NOR node name with dtschema
|
2022-04-13 18:42:50 +02:00 |
at91-dvk_su60_somc_lcm.dtsi
|
|
|
at91-foxg20.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91-gatwick.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-kizbox.dts
|
ARM: dts: at91: correct gpio-keys properties
|
2022-06-27 10:53:10 +02:00 |
at91-kizbox2-2.dts
|
|
|
at91-kizbox2-common.dtsi
|
ARM: dts: at91: correct gpio-keys properties
|
2022-06-27 10:53:10 +02:00 |
at91-kizbox3-hs.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91-kizbox3_common.dtsi
|
Revert "arm: dts: at91: Fix boolean properties with values"
|
2022-04-29 23:09:49 +02:00 |
at91-kizboxmini-base.dts
|
|
|
at91-kizboxmini-common.dtsi
|
ARM: dts: at91: correct gpio-keys properties
|
2022-06-27 10:53:10 +02:00 |
at91-kizboxmini-mb.dts
|
|
|
at91-kizboxmini-rd.dts
|
|
|
at91-linea.dtsi
|
|
|
at91-lmu5000.dts
|
ARM: dts: at91: add CalAmp LMU5000 board
|
2021-09-15 12:21:15 +02:00 |
at91-natte.dtsi
|
|
|
at91-nattis-2-natte-2.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91-q5xr5.dts
|
ARM: dts: at91: align SPI NOR node name with dtschema
|
2022-04-13 18:42:50 +02:00 |
at91-qil_a9260.dts
|
ARM: dts: at91: correct gpio-keys properties
|
2022-06-27 10:53:10 +02:00 |
at91-sam9_l9260.dts
|
ARM: dts: Fix more boolean properties with values
|
2022-04-14 22:50:37 +02:00 |
at91-sam9x60_curiosity.dts
|
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
|
2023-02-08 12:02:07 +02:00 |
at91-sam9x60ek.dts
|
ARM: dts: at91: sam9x60ek: Set sst26vf064b SPI NOR flash at its maximum frequency
|
2023-03-30 21:20:59 +02:00 |
at91-sama5d2_icp.dts
|
ARM: dts: at91: sama5d2_icp: Set sst26vf064b SPI NOR flash at its maximum frequency
|
2023-03-30 21:20:59 +02:00 |
at91-sama5d2_ptc_ek.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-sama5d2_xplained.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-sama5d3_eds.dts
|
dts: arm: at91: Add SAMA5D3-EDS Board
|
2022-09-14 10:33:30 +03:00 |
at91-sama5d3_ksz9477_evb.dts
|
ARM: dts: at91: ksz9477_evb: fix port/phy validation
|
2022-06-14 22:11:02 -07:00 |
at91-sama5d3_xplained.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-sama5d4_ma5d4.dtsi
|
ARM: dts: at91: align SPI NOR node name with dtschema
|
2022-04-13 18:42:50 +02:00 |
at91-sama5d4_ma5d4evk.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-sama5d4_xplained.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-sama5d4ek.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-sama5d27_som1.dtsi
|
ARM: dts: at91-sama5d27_som1: Set sst26vf064b SPI NOR flash at its maximum frequency
|
2023-03-30 21:20:59 +02:00 |
at91-sama5d27_som1_ek.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-sama5d27_wlsom1.dtsi
|
ARM: dts: at91-sama5d27_wlsom1: Set sst26vf064b SPI NOR flash at its maximum frequency
|
2023-03-30 21:20:59 +02:00 |
at91-sama5d27_wlsom1_ek.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-sama7g5ek.dts
|
ARM: dts: at91: sama7g5ek: align power rails for sdmmc0/1
|
2022-11-25 10:33:17 +02:00 |
at91-smartkiz.dts
|
|
|
at91-som60.dtsi
|
|
|
at91-tse850-3.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
at91-vinco.dts
|
ARM: dts: at91: align SPI NOR node name with dtschema
|
2022-04-13 18:42:50 +02:00 |
at91-wb45n.dts
|
ARM: dts: at91: correct gpio-keys properties
|
2022-06-27 10:53:10 +02:00 |
at91-wb45n.dtsi
|
|
|
at91-wb50n.dts
|
ARM: dts: at91: correct gpio-keys properties
|
2022-06-27 10:53:10 +02:00 |
at91-wb50n.dtsi
|
|
|
at91rm9200.dtsi
|
ARM: at91: rm9200: fix usb device clock id
|
2022-11-17 15:35:52 +02:00 |
at91rm9200_pqfp.dtsi
|
|
|
at91rm9200ek.dts
|
ARM: dts: at91: use generic node name for dataflash
|
2022-05-13 16:25:25 +03:00 |
at91sam9g15.dtsi
|
|
|
at91sam9g15ek.dts
|
|
|
at91sam9g20.dtsi
|
|
|
at91sam9g20ek.dts
|
|
|
at91sam9g20ek_2mmc.dts
|
|
|
at91sam9g20ek_common.dtsi
|
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
|
2022-11-17 15:23:50 +02:00 |
at91sam9g25-gardena-smart-gateway.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91sam9g25.dtsi
|
|
|
at91sam9g25ek.dts
|
|
|
at91sam9g35.dtsi
|
|
|
at91sam9g35ek.dts
|
|
|
at91sam9g45.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
at91sam9m10g45ek.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91sam9n12.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
at91sam9n12ek.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91sam9rl.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
at91sam9rlek.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91sam9x5.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
at91sam9x5_can.dtsi
|
|
|
at91sam9x5_isi.dtsi
|
|
|
at91sam9x5_lcd.dtsi
|
|
|
at91sam9x5_macb0.dtsi
|
|
|
at91sam9x5_macb1.dtsi
|
|
|
at91sam9x5_usart3.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
at91sam9x5cm.dtsi
|
|
|
at91sam9x5dm.dtsi
|
|
|
at91sam9x5ek.dtsi
|
ARM: dts: at91: align SPI NOR node name with dtschema
|
2022-04-13 18:42:50 +02:00 |
at91sam9x25.dtsi
|
|
|
at91sam9x25ek.dts
|
|
|
at91sam9x35.dtsi
|
|
|
at91sam9x35ek.dts
|
|
|
at91sam9xe.dtsi
|
|
|
at91sam9260.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
at91sam9260ek.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91sam9261.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
at91sam9261ek.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
at91sam9263.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
at91sam9263ek.dts
|
ARM: dts: at91: align gpio-key node names with dtschema
|
2022-06-27 10:52:42 +02:00 |
axm55xx.dtsi
|
ARM: dts: axm55xx: align UART node name with bindings
|
2023-01-26 11:21:42 +01:00 |
axm5516-amarillo.dts
|
|
|
axm5516-cpus.dtsi
|
ARM: dts: axm: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
axp22x.dtsi
|
ARM: dts: axp22x/axp809: Add GPIO controller nodes
|
2022-10-26 22:15:34 +02:00 |
axp81x.dtsi
|
ARM: dts: axp803/axp81x: Drop GPIO LDO pinctrl nodes
|
2022-10-26 22:15:04 +02:00 |
axp152.dtsi
|
|
|
axp209.dtsi
|
ARM: dts: sunxi: Rename power-supply names
|
2021-09-13 09:04:29 +02:00 |
axp223.dtsi
|
|
|
axp809.dtsi
|
ARM: dts: axp22x/axp809: Add GPIO controller nodes
|
2022-10-26 22:15:34 +02:00 |
bcm-cygnus-clock.dtsi
|
|
|
bcm-cygnus.dtsi
|
ARM: dts: bcm-cygnus: Update spi clock properties
|
2022-04-04 11:33:12 -07:00 |
bcm-hr2.dtsi
|
ARM: dts: HR2: Fixed iProc PCIe MSI sub-node
|
2021-12-19 10:48:33 -08:00 |
bcm-nsp-ax.dtsi
|
ARM: dts: NSP: Add Ax stepping modifications
|
2021-09-14 14:34:51 -07:00 |
bcm-nsp.dtsi
|
ARM: dts: NSP: Rename SATA unit name
|
2021-12-19 10:48:34 -08:00 |
bcm9hmidc.dtsi
|
|
|
bcm283x-rpi-lan7515.dtsi
|
|
|
bcm283x-rpi-led-deprecated.dtsi
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm283x-rpi-smsc9512.dtsi
|
ARM: dts: bcm283x: fix ethernet node name
|
2022-04-04 09:46:54 -07:00 |
bcm283x-rpi-smsc9514.dtsi
|
ARM: dts: bcm283x: fix ethernet node name
|
2022-04-04 09:46:54 -07:00 |
bcm283x-rpi-usb-host.dtsi
|
|
|
bcm283x-rpi-usb-otg.dtsi
|
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
|
2021-06-08 10:35:22 +02:00 |
bcm283x-rpi-usb-peripheral.dtsi
|
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
|
2021-06-08 10:35:22 +02:00 |
bcm283x-rpi-wifi-bt.dtsi
|
ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
|
2021-10-06 09:53:18 +02:00 |
bcm283x.dtsi
|
ARM: dts: bcm283x: Fix underscores in node names
|
2022-11-10 11:41:41 -08:00 |
bcm2711-rpi-4-b.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2711-rpi-400.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2711-rpi-cm4-io.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2711-rpi-cm4.dtsi
|
ARM: dts: bcm283x: Fix underscores in node names
|
2022-11-10 11:41:41 -08:00 |
bcm2711-rpi.dtsi
|
ARM: dts: bcm2711: Enable V3D
|
2022-06-13 10:12:30 -07:00 |
bcm2711.dtsi
|
arm: dts: Update cache properties for broadcom
|
2022-11-28 15:37:14 -08:00 |
bcm2835-common.dtsi
|
ARM: dts: bcm283x: Fix underscores in node names
|
2022-11-10 11:41:41 -08:00 |
bcm2835-rpi-a-plus.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835-rpi-a.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835-rpi-b-plus.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835-rpi-b-rev2.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835-rpi-b.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835-rpi-cm1-io1.dts
|
ARM: dts: bcm283x: Remove gpio line name NC
|
2022-04-19 11:28:55 -07:00 |
bcm2835-rpi-cm1.dtsi
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835-rpi-common.dtsi
|
ARM: dts: bcm2835-rpi: Use firmware clocks for display
|
2022-11-10 10:15:15 -08:00 |
bcm2835-rpi-zero-w.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835-rpi-zero.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835-rpi.dtsi
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2835.dtsi
|
ARM: dts: bcm283x: Remove bcm2835-rpi-common.dtsi from SoC DTSI
|
2022-11-10 10:15:08 -08:00 |
bcm2836-rpi-2-b.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2836-rpi.dtsi
|
ARM: dts: bcm283x: Remove bcm2835-rpi-common.dtsi from SoC DTSI
|
2022-11-10 10:15:08 -08:00 |
bcm2836.dtsi
|
arm: dts: Update cache properties for broadcom
|
2022-11-28 15:37:14 -08:00 |
bcm2837-rpi-3-a-plus.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2837-rpi-3-b-plus.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2837-rpi-3-b.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2837-rpi-cm3-io3.dts
|
ARM: dts: bcm283x: Remove gpio line name NC
|
2022-04-19 11:28:55 -07:00 |
bcm2837-rpi-cm3.dtsi
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2837-rpi-zero-2-w.dts
|
ARM: dts: bcm283x: Move ACT LED into separate dtsi
|
2022-11-10 11:41:58 -08:00 |
bcm2837.dtsi
|
arm: dts: Update cache properties for broadcom
|
2022-11-28 15:37:14 -08:00 |
bcm4708-asus-rt-ac56u.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708-asus-rt-ac68u.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708-buffalo-wzr-1166dhp-common.dtsi
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708-buffalo-wzr-1166dhp.dts
|
ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
|
2022-05-03 15:02:11 -07:00 |
bcm4708-buffalo-wzr-1166dhp2.dts
|
ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
|
2022-05-03 15:02:11 -07:00 |
bcm4708-buffalo-wzr-1750dhp.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708-linksys-ea6300-v1.dts
|
ARM: dts: broadcom: align gpio-key node names with dtschema
|
2022-06-14 09:09:27 -07:00 |
bcm4708-linksys-ea6500-v2.dts
|
ARM: dts: broadcom: align gpio-key node names with dtschema
|
2022-06-14 09:09:27 -07:00 |
bcm4708-luxul-xap-1510.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708-luxul-xwc-1000.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708-netgear-r6250.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708-netgear-r6300-v2.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708-smartrg-sr400ac.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4708.dtsi
|
|
|
bcm4709-asus-rt-ac87u.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4709-buffalo-wxr-1900dhp.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4709-linksys-ea9200.dts
|
ARM: dts: broadcom: correct gpio-keys properties
|
2022-06-14 09:09:27 -07:00 |
bcm4709-netgear-r7000.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4709-netgear-r8000.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4709-tplink-archer-c9-v1.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm4709.dtsi
|
|
|
bcm5301x-nand-cs0-bch1.dtsi
|
|
|
bcm5301x-nand-cs0-bch4.dtsi
|
|
|
bcm5301x-nand-cs0-bch8.dtsi
|
|
|
bcm5301x-nand-cs0.dtsi
|
Revert "ARM: dts: BCM5301X: Fix DTC warning for NAND node"
|
2022-05-13 11:28:14 +02:00 |
bcm5301x.dtsi
|
Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"
|
2022-10-05 10:22:40 +02:00 |
bcm6756.dtsi
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm6846.dtsi
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm6855.dtsi
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm6878.dtsi
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm7445-bcm97445svmb.dts
|
ARM: brcmstb: dts: fix NAND nodes names
|
2021-05-10 14:50:06 -07:00 |
bcm7445.dtsi
|
ARM: brcmstb: dts: fix NAND nodes names
|
2021-05-10 14:50:06 -07:00 |
bcm11351.dtsi
|
ARM: dts: broadcom: align UART node name with bindings
|
2023-01-23 10:07:41 -08:00 |
bcm21664-garnet.dts
|
ARM: dts: broadcom: align UART node name with bindings
|
2023-01-23 10:07:41 -08:00 |
bcm21664.dtsi
|
ARM: dts: broadcom: align UART node name with bindings
|
2023-01-23 10:07:41 -08:00 |
bcm23550-sparrow.dts
|
|
|
bcm23550.dtsi
|
|
|
bcm28155-ap.dts
|
ARM: dts: broadcom: align UART node name with bindings
|
2023-01-23 10:07:41 -08:00 |
bcm47081-asus-rt-n18u.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47081-buffalo-wzr-600dhp2.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47081-buffalo-wzr-900dhp.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47081-luxul-xap-1410.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47081-luxul-xwr-1200.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47081-tplink-archer-c5-v2.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47081.dtsi
|
|
|
bcm47094-asus-rt-ac88u.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-dlink-dir-885l.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-dlink-dir-890l.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-linksys-panamera.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-luxul-abr-4500.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-luxul-xap-1610.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-luxul-xbr-4500.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-luxul-xwc-2000.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-luxul-xwr-3100.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-luxul-xwr-3150-v1.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-netgear-r8500.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47094-phicomm-k3.dts
|
ARM: dts: broadcom: align gpio-key node names with dtschema
|
2022-06-14 09:09:27 -07:00 |
bcm47094.dtsi
|
ARM: dts: BCM5301X: Fix pinmux subnodes names
|
2021-05-10 14:50:10 -07:00 |
bcm47189-luxul-xap-810.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47189-luxul-xap-1440.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47189-tenda-ac9.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm47622.dtsi
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm53015-meraki-mr26.dts
|
ARM: dts: BCM5301X: Add DT for Meraki MR26
|
2022-06-20 15:31:25 -07:00 |
bcm53016-dlink-dwl-8610ap.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm53016-meraki-mr32.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm53340-ubnt-unifi-switch8.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
bcm53573.dtsi
|
ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
|
2021-09-21 14:19:41 -07:00 |
bcm59056.dtsi
|
|
|
bcm63138.dtsi
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm63148.dtsi
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm63178.dtsi
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm94708.dts
|
ARM: dts: BCM5301X: Fix memory nodes names
|
2021-09-14 14:34:55 -07:00 |
bcm94709.dts
|
ARM: dts: BCM5301X: Fix memory nodes names
|
2021-09-14 14:34:55 -07:00 |
bcm96756.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm96846.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm96855.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm96878.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm911360_entphn.dts
|
ARM: dts: broadcom: align gpio-key node names with dtschema
|
2022-06-14 09:09:27 -07:00 |
bcm911360k.dts
|
|
|
bcm947189acdbmr.dts
|
ARM: dts: broadcom: align LED node names with dtschema
|
2022-11-28 15:35:24 -08:00 |
bcm947622.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm953012er.dts
|
ARM: dts: broadcom: align gpio-key node names with dtschema
|
2022-06-14 09:09:27 -07:00 |
bcm953012hr.dts
|
ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
|
2022-04-04 11:38:15 -07:00 |
bcm953012k.dts
|
ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
|
2022-04-04 11:38:15 -07:00 |
bcm958300k.dts
|
ARM: Cygnus: dts: fix NAND nodes names
|
2021-05-10 14:50:07 -07:00 |
bcm958305k.dts
|
ARM: Cygnus: dts: fix NAND nodes names
|
2021-05-10 14:50:07 -07:00 |
bcm958522er.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
bcm958525er.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
bcm958525xmc.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
bcm958622hr.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
bcm958623hr.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
bcm958625-meraki-alamo.dtsi
|
ARM: dts: broadcom: align gpio-key node names with dtschema
|
2022-06-14 09:09:27 -07:00 |
bcm958625-meraki-kingpin.dtsi
|
ARM: dts: broadcom: align gpio-key node names with dtschema
|
2022-06-14 09:09:27 -07:00 |
bcm958625-meraki-mx6x-common.dtsi
|
ARM: dts: NSP: MX6X: correct LED function types
|
2022-02-24 16:47:25 -08:00 |
bcm958625-meraki-mx64-a0.dts
|
ARM: dts: NSP: Add DT files for Meraki MX64 series
|
2021-09-14 14:34:52 -07:00 |
bcm958625-meraki-mx64.dts
|
ARM: dts: NSP: Add DT files for Meraki MX64 series
|
2021-09-14 14:34:52 -07:00 |
bcm958625-meraki-mx64w-a0.dts
|
ARM: dts: NSP: Add DT files for Meraki MX64 series
|
2021-09-14 14:34:52 -07:00 |
bcm958625-meraki-mx64w.dts
|
ARM: dts: NSP: Add DT files for Meraki MX64 series
|
2021-09-14 14:34:52 -07:00 |
bcm958625-meraki-mx65.dts
|
ARM: dts: NSP: Add DT files for Meraki MX65 series
|
2021-09-14 14:34:53 -07:00 |
bcm958625-meraki-mx65w.dts
|
ARM: dts: NSP: Add DT files for Meraki MX65 series
|
2021-09-14 14:34:53 -07:00 |
bcm958625hr.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
bcm958625k.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
bcm963138.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm963138dvt.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm963148.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm963178.dts
|
ARM: dts: broadcom: bcmbca: Add spi controller node
|
2023-03-14 14:07:06 -07:00 |
bcm988312hr.dts
|
ARM: dts: broadcom: align SPI NOR node name with dtschema
|
2022-04-07 11:56:23 -07:00 |
berlin2-sony-nsz-gs7.dts
|
|
|
berlin2.dtsi
|
|
|
berlin2cd-google-chromecast.dts
|
|
|
berlin2cd-valve-steamlink.dts
|
|
|
berlin2cd.dtsi
|
|
|
berlin2q-marvell-dmp.dts
|
|
|
berlin2q.dtsi
|
ARM: dts: berlin: align UART node name with bindings
|
2023-01-27 10:44:58 +01:00 |
compulab-sb-som.dtsi
|
|
|
cros-adc-thermistors.dtsi
|
|
|
cros-ec-keyboard.dtsi
|
ARM: dts: cros-ec-keyboard: Use keymap macros
|
2021-02-22 21:22:34 -08:00 |
cros-ec-sbs.dtsi
|
|
|
cx92755.dtsi
|
ARM: dts: cx92755: align UART node name with bindings
|
2023-01-25 11:38:57 +01:00 |
cx92755_equinox.dts
|
|
|
da850-enbw-cmc.dts
|
|
|
da850-evm.dts
|
ARM: dts: ti: use "okay" for status
|
2023-03-12 18:00:43 +01:00 |
da850-lcdk.dts
|
|
|
da850-lego-ev3.dts
|
|
|
da850.dtsi
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
dm814x-clocks.dtsi
|
|
|
dm814x.dtsi
|
ARM: dts: dm814x: align UART node name with bindings
|
2023-01-26 11:22:22 +01:00 |
dm816x-clocks.dtsi
|
|
|
dm816x.dtsi
|
ARM: dts: dm814x: align UART node name with bindings
|
2023-01-26 11:22:22 +01:00 |
dm3725.dtsi
|
|
|
dm8148-evm.dts
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
dm8148-t410.dts
|
|
|
dm8168-evm.dts
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
dove-cm-a510.dtsi
|
mvebu dt for 6.3 (part 1)
|
2023-02-03 14:13:48 +01:00 |
dove-cubox-es.dts
|
|
|
dove-cubox.dts
|
mvebu dt for 6.3 (part 1)
|
2023-02-03 14:13:48 +01:00 |
dove-d2plug.dts
|
ARM: dts: dove: align LED node names with dtschema
|
2023-01-13 11:38:17 +01:00 |
dove-d3plug.dts
|
ARM: dts: dove: align LED node names with dtschema
|
2023-01-13 11:38:17 +01:00 |
dove-dove-db.dts
|
ARM: dts: marvell: align SPI NOR node name with dtschema
|
2022-04-20 11:06:30 +02:00 |
dove-sbc-a510.dts
|
|
|
dove.dtsi
|
ARM: dts: marvell: use "okay" for status
|
2023-03-12 18:00:09 +01:00 |
dra7-dspeve-thermal.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
dra7-evm-common.dtsi
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
dra7-evm.dts
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
dra7-ipu-dsp-common.dtsi
|
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
|
2021-05-27 15:12:33 +03:00 |
dra7-iva-thermal.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
dra7-l4.dtsi
|
ARM: dts: dra7: Fix suspend warning for vpe powerdomain
|
2022-04-12 12:55:47 +03:00 |
dra7-mmc-iodelay.dtsi
|
|
|
dra7.dtsi
|
- Fix return error code check for the timer-of layer when getting
|
2022-03-14 10:18:17 +01:00 |
dra7xx-clocks.dtsi
|
ARM: dts: Use clock-output-names for dra7
|
2022-04-11 16:03:33 +03:00 |
dra62x-clocks.dtsi
|
|
|
dra62x-j5eco-evm.dts
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
dra62x.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
dra71-evm.dts
|
ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
|
2021-05-27 15:06:57 +03:00 |
dra71x.dtsi
|
ARM: dts: dra7: Fix duplicate USB4 target module node
|
2021-06-11 08:30:42 +03:00 |
dra72-evm-common.dtsi
|
ARM: dts: omap: trim addresses to 8 digits
|
2022-11-18 09:57:25 +01:00 |
dra72-evm-revc.dts
|
|
|
dra72-evm-tps65917.dtsi
|
|
|
dra72-evm.dts
|
|
|
dra72x-mmc-iodelay.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
dra72x.dtsi
|
ARM: Devicetree material for 5.14
|
2021-07-10 09:33:54 -07:00 |
dra74-ipu-dsp-common.dtsi
|
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
|
2021-05-27 15:12:33 +03:00 |
dra74x-mmc-iodelay.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
dra74x-p.dtsi
|
ARM: dts: Add support for dra762 abz package
|
2021-07-27 11:42:29 +03:00 |
dra74x.dtsi
|
ARM: Devicetree material for 5.14
|
2021-07-10 09:33:54 -07:00 |
dra76-evm.dts
|
ARM: dts: omap: align SPI NOR node name with dtschema
|
2022-04-20 11:06:07 +02:00 |
dra76x-mmc-iodelay.dtsi
|
|
|
dra76x.dtsi
|
ARM: dts: ti: adjust whitespace around '='
|
2022-06-27 10:41:42 +02:00 |
e60k02.dtsi
|
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
|
2023-03-14 11:43:42 +08:00 |
e70k02.dtsi
|
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
|
2023-03-14 11:43:42 +08:00 |
ecx-2000.dts
|
|
|
ecx-common.dtsi
|
ARM: dts: ecx: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
elpida_ecb240abacn.dtsi
|
ARM: dts: elpida_ecb240abacn: Change Elpida compatible
|
2021-12-09 09:11:10 +02:00 |
emev2-kzm9d.dts
|
ARM: dts: renesas: Fix SMSC Ethernet compatible values
|
2021-09-28 09:44:10 +02:00 |
emev2.dtsi
|
|
|
en7523-evb.dts
|
ARM: dts: Add PCIe support for Airoha EN7523
|
2022-06-15 18:54:20 +02:00 |
en7523.dtsi
|
ARM: dts: Add PCIe support for Airoha EN7523
|
2022-06-15 18:54:20 +02:00 |
ep7209.dtsi
|
ARM: dts: clps711x: fix missing interrupt parent
|
2021-04-09 09:35:08 +02:00 |
ep7211-edb7211.dts
|
ARM: dts: clps711x: edb7211: Add unit-address to memory node
|
2021-04-07 14:02:58 +02:00 |
ep7211.dtsi
|
|
|
ethernut5.dts
|
|
|
evk-pro3.dts
|
|
|
exynos-mfc-reserved-memory.dtsi
|
|
|
exynos-pinctrl.h
|
ARM: dts: exynos: use local header for pinctrl register values
|
2022-06-07 08:41:11 +02:00 |
exynos-syscon-restart.dtsi
|
ARM: dts: exynos: use lowercase hex addresses
|
2023-01-26 11:16:33 +01:00 |
exynos4-cpu-thermal.dtsi
|
ARM: dts: exynos: correct TMU phandle in Exynos4
|
2023-02-17 10:27:28 +01:00 |
exynos4.dtsi
|
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
|
2023-03-06 10:34:14 +01:00 |
exynos5.dtsi
|
ARM: dts: exynos: use lowercase hex addresses
|
2023-01-26 11:16:33 +01:00 |
exynos54xx-odroidxu-leds.dtsi
|
ARM: dts: exynos: add function and color to LED nodes in Odroid XU/XU3
|
2022-06-22 13:58:01 +02:00 |
exynos54xx.dtsi
|
ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos54xx
|
2023-01-29 11:34:12 +01:00 |
exynos3250-artik5-eval.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos3250-artik5.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos3250-monk.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos3250-pinctrl.dtsi
|
ARM: dts: exynos: use local header for pinctrl register values
|
2022-06-07 08:41:11 +02:00 |
exynos3250-rinato.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos3250.dtsi
|
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
|
2023-04-03 18:16:49 +02:00 |
exynos4210-i9100.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4210-origen.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4210-pinctrl.dtsi
|
ARM: dts: exynos: use local header for pinctrl register values
|
2022-06-07 08:41:11 +02:00 |
exynos4210-smdkv310.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4210-trats.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4210-universal_c210.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4210.dtsi
|
ARM: SoC fixes for 6.3, part 1
|
2023-02-27 10:09:40 -08:00 |
exynos4412-galaxy-s3.dtsi
|
ARM: dts: exynos: add function and color to aat1290 flash LED node in Galaxy S3
|
2022-06-22 13:57:33 +02:00 |
exynos4412-i9300.dts
|
ARM: dts: exynos: add 'chassis-type' property
|
2021-10-19 10:57:40 +02:00 |
exynos4412-i9305.dts
|
ARM: dts: exynos: add 'chassis-type' property
|
2021-10-19 10:57:40 +02:00 |
exynos4412-itop-elite.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4412-itop-scp-core.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4412-midas.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4412-n710x.dts
|
ARM: dts: exynos: add 'chassis-type' property
|
2021-10-19 10:57:40 +02:00 |
exynos4412-odroid-common.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4412-odroidu3.dts
|
ARM: dts: exynos: use lowercase hex addresses
|
2023-01-26 11:16:33 +01:00 |
exynos4412-odroidx.dts
|
ARM: dts: exynos: use lowercase hex addresses
|
2023-01-26 11:16:33 +01:00 |
exynos4412-odroidx2.dts
|
ARM: dts: exynos: use lowercase hex addresses
|
2023-01-26 11:16:33 +01:00 |
exynos4412-origen.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4412-p4note-n8010.dts
|
ARM: dts: exynos: add 'chassis-type' property
|
2021-10-19 10:57:40 +02:00 |
exynos4412-p4note.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4412-pinctrl.dtsi
|
ARM: dts: exynos: align pin node names in Exynos4412
|
2023-01-23 10:55:59 +01:00 |
exynos4412-ppmu-common.dtsi
|
ARM: dts: exynos: white-space cleanups
|
2021-03-19 11:34:46 +01:00 |
exynos4412-prime.dtsi
|
|
|
exynos4412-smdk4412.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4412-tiny4412.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos4412-trats2.dts
|
ARM: dts: exynos: add 'chassis-type' property
|
2021-10-19 10:57:40 +02:00 |
exynos4412.dtsi
|
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
|
2023-04-03 18:16:49 +02:00 |
exynos5250-arndale.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5250-pinctrl.dtsi
|
ARM: dts: exynos: use local header for pinctrl register values
|
2022-06-07 08:41:11 +02:00 |
exynos5250-smdk5250.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5250-snow-common.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5250-snow-rev5.dts
|
ARM: dts: exynos: correct max98090 DAI argument in Snow
|
2023-02-09 12:58:30 +01:00 |
exynos5250-snow.dts
|
ARM: dts: exynos: align pinctrl with dtschema in Exynos5250
|
2022-01-23 17:54:53 +01:00 |
exynos5250-spring.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5250.dtsi
|
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
|
2023-04-03 18:16:49 +02:00 |
exynos5260-pinctrl.dtsi
|
ARM: dts: exynos: use local header for pinctrl register values
|
2022-06-07 08:41:11 +02:00 |
exynos5260-xyref5260.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5260.dtsi
|
ARM: dts: exynos: use lowercase hex addresses
|
2023-01-26 11:16:33 +01:00 |
exynos5410-odroidxu.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5410-pinctrl.dtsi
|
ARM: dts: exynos: use local header for pinctrl register values
|
2022-06-07 08:41:11 +02:00 |
exynos5410-smdk5410.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5410.dtsi
|
ARM: dts: exynos: use lowercase hex addresses
|
2023-01-26 11:16:33 +01:00 |
exynos5420-arndale-octa.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5420-chagall-wifi.dts
|
ARM: dts: exynos: Add support for Samsung Chagall WiFi
|
2022-01-23 20:12:57 +01:00 |
exynos5420-cpus.dtsi
|
ARM: dts: exynos: add CPU topology to Exynos5420
|
2021-08-05 09:24:02 +02:00 |
exynos5420-galaxy-tab-common.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5420-klimt-wifi.dts
|
ARM: dts: exynos: Add support for Samsung Klimt WiFi
|
2022-01-25 17:59:21 +01:00 |
exynos5420-peach-pit.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5420-pinctrl.dtsi
|
ARM: dts: exynos: use local header for pinctrl register values
|
2022-06-07 08:41:11 +02:00 |
exynos5420-smdk5420.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5420-trip-points.dtsi
|
|
|
exynos5420.dtsi
|
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
|
2023-04-03 18:16:49 +02:00 |
exynos5422-cpus.dtsi
|
ARM: dts: exynos: add CPU topology to Exynos5422
|
2021-08-05 09:24:04 +02:00 |
exynos5422-odroid-core.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5422-odroidhc1.dts
|
ARM: dts: exynos: correct TMU phandle in Odroid HC1
|
2023-02-17 10:27:28 +01:00 |
exynos5422-odroidxu3-audio.dtsi
|
|
|
exynos5422-odroidxu3-common.dtsi
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5422-odroidxu3-lite.dts
|
ARM: dts: exynos: fix compatible strings for Ethernet USB devices
|
2022-04-04 18:21:28 +02:00 |
exynos5422-odroidxu3.dts
|
ARM: dts: exynos: fix compatible strings for Ethernet USB devices
|
2022-04-04 18:21:28 +02:00 |
exynos5422-odroidxu4.dts
|
ARM: dts: exynos: add function and color to LED node in Odroid XU4
|
2022-06-22 13:58:01 +02:00 |
exynos5422-samsung-k3g.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5800-peach-pi.dts
|
ARM: dts: exynos: add mmc aliases
|
2023-04-03 18:16:55 +02:00 |
exynos5800.dtsi
|
ARM: dts: exynos: Use Exynos5422 compatible for the DSI controller
|
2023-01-23 16:38:47 +01:00 |
facebook-bmc-flash-layout-128.dtsi
|
ARM: dts: Add Facebook BMC 128MB flash layout
|
2021-08-13 11:02:11 +09:30 |
facebook-bmc-flash-layout.dtsi
|
|
|
ge863-pro3.dtsi
|
|
|
gemini-dlink-dir-685.dts
|
ARM: dts: gemini: Consolidate PCI interrupt-map properties
|
2021-10-20 02:41:51 +02:00 |
gemini-dlink-dns-313.dts
|
ARM: dts: gemini: Enable DNS313 FOTG210 as periph
|
2023-01-25 08:49:32 +01:00 |
gemini-nas4220b.dts
|
ARM: dts: gemini: NAS4220-B: fis-index-block with 128 KiB sectors
|
2021-12-13 23:48:02 +01:00 |
gemini-ns2502.dts
|
ARM: dts: Let Gemini NS2502 parse redboot partitions
|
2022-08-26 13:38:35 +02:00 |
gemini-rut1xx.dts
|
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
|
2021-05-10 01:32:26 +02:00 |
gemini-sl93512r.dts
|
ARM: dts: gemini: Consolidate PCI interrupt-map properties
|
2021-10-20 02:41:51 +02:00 |
gemini-sq201.dts
|
ARM: dts: gemini: Consolidate PCI interrupt-map properties
|
2021-10-20 02:41:51 +02:00 |
gemini-ssi1328.dts
|
ARM: dts: gemini: ssi1328: permit to use gigabit
|
2022-08-26 13:26:58 +02:00 |
gemini-wbd111.dts
|
ARM: dts: gemini: wbd111: Use RedBoot partion parser
|
2023-01-25 08:48:33 +01:00 |
gemini-wbd222.dts
|
ARM: dts: gemini: wbd222: Use RedBoot partion parser
|
2023-01-25 08:48:33 +01:00 |
gemini.dtsi
|
ARM: dts: gemini: Enable DNS313 FOTG210 as periph
|
2023-01-25 08:49:32 +01:00 |
gr-peach-audiocamerashield.dtsi
|
|
|
hi3519-demb.dts
|
|
|
hi3519.dtsi
|
|
|
hi3620-hi4511.dts
|
ARM: dts: hisilicon: use "okay" for status
|
2023-03-12 18:01:00 +01:00 |
hi3620.dtsi
|
ARM: dts: hisilicon: use the correct HiSilicon copyright
|
2021-06-17 01:53:05 +00:00 |
highbank.dts
|
|
|
hip01-ca9x2.dts
|
ARM: dts: hisilicon: use the correct HiSilicon copyright
|
2021-06-17 01:53:05 +00:00 |
hip01.dtsi
|
ARM: dts: hisilicon: use the correct HiSilicon copyright
|
2021-06-17 01:53:05 +00:00 |
hip04-d01.dts
|
ARM: dts: hisilicon: use "okay" for status
|
2023-03-12 18:01:00 +01:00 |
hip04.dtsi
|
ARM: dts: hisilicon: use the correct HiSilicon copyright
|
2021-06-17 01:53:05 +00:00 |
hisi-x5hd2-dkb.dts
|
ARM: dts: hisilicon: use the correct HiSilicon copyright
|
2021-06-17 01:53:05 +00:00 |
hisi-x5hd2.dtsi
|
ARM: dts: hisilicon: use the correct HiSilicon copyright
|
2021-06-17 01:53:05 +00:00 |
hpe-bmc-dl360gen10.dts
|
ARM: dts: Introduce HPE GXP Device tree
|
2022-05-18 14:05:54 +02:00 |
hpe-gxp.dtsi
|
ARM: dts: Introduce HPE GXP Device tree
|
2022-05-18 14:05:54 +02:00 |
ibm-power9-dual.dtsi
|
|
|
imx1-ads.dts
|
|
|
imx1-apf9328.dts
|
|
|
imx1-pinfunc.h
|
ARM: dts: imx: Fix typo in pinfunc comments
|
2021-11-23 19:55:03 +08:00 |
imx1.dtsi
|
ARM: dts: imx1: drop "fsl,imx-clk32"
|
2021-12-14 11:22:24 +08:00 |
imx6-logicpd-baseboard.dtsi
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx6-logicpd-som.dtsi
|
|
|
imx6dl-alti6p.dts
|
ARM: dts: imx6dl-alti6p: configure ethernet reference clock parent
|
2023-03-06 10:01:46 +08:00 |
imx6dl-apf6dev.dts
|
|
|
imx6dl-aristainetos2_4.dts
|
|
|
imx6dl-aristainetos2_7.dts
|
|
|
imx6dl-aristainetos_4.dts
|
|
|
imx6dl-aristainetos_7.dts
|
|
|
imx6dl-b1x5pv2.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6dl-b1x5v2.dtsi
|
ARM: dts: imx6dl-b1x5v2: drop unsupported vcc-supply for MPL3115A2
|
2021-10-05 13:15:36 +08:00 |
imx6dl-b105pv2.dts
|
ARM: dts: imx6: Add GE B1x5v2
|
2021-06-12 12:22:22 +08:00 |
imx6dl-b105v2.dts
|
ARM: dts: imx6: Add GE B1x5v2
|
2021-06-12 12:22:22 +08:00 |
imx6dl-b125pv2.dts
|
ARM: dts: imx6: Add GE B1x5v2
|
2021-06-12 12:22:22 +08:00 |
imx6dl-b125v2.dts
|
ARM: dts: imx6: Add GE B1x5v2
|
2021-06-12 12:22:22 +08:00 |
imx6dl-b155v2.dts
|
ARM: dts: imx6: Add GE B1x5v2
|
2021-06-12 12:22:22 +08:00 |
imx6dl-colibri-aster.dts
|
ARM: dts: colibri-imx6: Disable usb over-current
|
2022-12-31 15:33:33 +08:00 |
imx6dl-colibri-eval-v3.dts
|
ARM: dts: colibri-imx6: Disable usb over-current
|
2022-12-31 15:33:33 +08:00 |
imx6dl-colibri-iris-v2.dts
|
ARM: dts: imx6dl-colibri: Add support for Toradex Iris carrier boards
|
2022-04-19 08:43:08 +08:00 |
imx6dl-colibri-iris.dts
|
ARM: dts: colibri-imx6: Disable usb over-current
|
2022-12-31 15:33:33 +08:00 |
imx6dl-cubox-i-emmc-som-v15.dts
|
|
|
imx6dl-cubox-i-som-v15.dts
|
|
|
imx6dl-cubox-i.dts
|
|
|
imx6dl-dfi-fs700-m60.dts
|
|
|
imx6dl-dhcom-picoitx.dts
|
ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board
|
2021-08-09 15:37:52 +08:00 |
imx6dl-eckelmann-ci4x10.dts
|
ARM: dts: imx6dl-eckelmann-ci4x10: configure ethernet reference clock parent
|
2023-03-06 10:01:46 +08:00 |
imx6dl-emcon-avari.dts
|
|
|
imx6dl-gw51xx.dts
|
|
|
imx6dl-gw52xx.dts
|
|
|
imx6dl-gw53xx.dts
|
|
|
imx6dl-gw54xx.dts
|
|
|
imx6dl-gw551x.dts
|
|
|
imx6dl-gw552x.dts
|
|
|
imx6dl-gw553x.dts
|
|
|
imx6dl-gw560x.dts
|
|
|
imx6dl-gw5903.dts
|
|
|
imx6dl-gw5904.dts
|
|
|
imx6dl-gw5907.dts
|
|
|
imx6dl-gw5910.dts
|
|
|
imx6dl-gw5912.dts
|
|
|
imx6dl-gw5913.dts
|
|
|
imx6dl-hummingboard-emmc-som-v15.dts
|
|
|
imx6dl-hummingboard-som-v15.dts
|
|
|
imx6dl-hummingboard.dts
|
|
|
imx6dl-hummingboard2-emmc-som-v15.dts
|
|
|
imx6dl-hummingboard2-som-v15.dts
|
|
|
imx6dl-hummingboard2.dts
|
|
|
imx6dl-icore-mipi.dts
|
|
|
imx6dl-icore-rqs.dts
|
|
|
imx6dl-icore.dts
|
|
|
imx6dl-kontron-samx6i.dtsi
|
|
|
imx6dl-lanmcu.dts
|
ARM: dts: imx6dl-lanmcu: configure ethernet reference clock parent
|
2023-03-06 10:01:45 +08:00 |
imx6dl-mamoj.dts
|
|
|
imx6dl-mba6.dtsi
|
ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees
|
2021-12-06 08:51:14 +08:00 |
imx6dl-mba6a.dts
|
ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees
|
2021-12-06 08:51:14 +08:00 |
imx6dl-mba6b.dts
|
ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees
|
2021-12-06 08:51:14 +08:00 |
imx6dl-nit6xlite.dts
|
|
|
imx6dl-nitrogen6x.dts
|
|
|
imx6dl-phytec-mira-rdk-nand.dts
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6dl-phytec-pbab01.dts
|
|
|
imx6dl-phytec-pfla02.dtsi
|
|
|
imx6dl-pico-dwarf.dts
|
|
|
imx6dl-pico-hobbit.dts
|
|
|
imx6dl-pico-nymph.dts
|
|
|
imx6dl-pico-pi.dts
|
|
|
imx6dl-pinfunc.h
|
|
|
imx6dl-plybas.dts
|
ARM: dts: imx6dl-plybas: configure ethernet reference clock parent
|
2023-03-06 10:01:46 +08:00 |
imx6dl-plym2m.dts
|
ARM: dts: imx6dl-plym2m: configure ethernet reference clock parent
|
2023-03-06 10:01:46 +08:00 |
imx6dl-prtmvt.dts
|
ARM: dts: imx6dl-prtmvt: configure ethernet reference clock parent
|
2023-03-06 10:01:46 +08:00 |
imx6dl-prtrvt.dts
|
ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties
|
2021-10-15 11:04:42 +08:00 |
imx6dl-prtvt7.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx6dl-qmx6.dtsi
|
ARM: dts: imx6: Add GE B1x5v2
|
2021-06-12 12:22:22 +08:00 |
imx6dl-rex-basic.dts
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6dl-riotboard.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6dl-sabreauto.dts
|
|
|
imx6dl-sabrelite.dts
|
|
|
imx6dl-sabresd.dts
|
|
|
imx6dl-savageboard.dts
|
|
|
imx6dl-skov-revc-lt2.dts
|
ARM: dts: imx6: skov: provide panel support for lt2 variants
|
2021-10-05 14:12:40 +08:00 |
imx6dl-skov-revc-lt6.dts
|
ARM: dts: add SKOV imx6q and imx6dl based boards
|
2021-08-14 13:26:33 +08:00 |
imx6dl-solidsense.dts
|
ARM: dts: add SolidRun SolidSense support
|
2021-07-15 19:00:49 +08:00 |
imx6dl-tqma6a.dtsi
|
|
|
imx6dl-tqma6b.dtsi
|
|
|
imx6dl-ts4900.dts
|
|
|
imx6dl-ts7970.dts
|
|
|
imx6dl-tx6dl-comtft.dts
|
|
|
imx6dl-tx6s-8034-mb7.dts
|
|
|
imx6dl-tx6s-8034.dts
|
|
|
imx6dl-tx6s-8035-mb7.dts
|
|
|
imx6dl-tx6s-8035.dts
|
|
|
imx6dl-tx6u-80xx-mb7.dts
|
|
|
imx6dl-tx6u-81xx-mb7.dts
|
|
|
imx6dl-tx6u-801x.dts
|
|
|
imx6dl-tx6u-811x.dts
|
|
|
imx6dl-tx6u-8033-mb7.dts
|
|
|
imx6dl-tx6u-8033.dts
|
|
|
imx6dl-udoo.dts
|
|
|
imx6dl-victgo.dts
|
ARM: dts: imx6dl-victgo: configure ethernet reference clock parent
|
2023-03-06 10:01:46 +08:00 |
imx6dl-vicut1.dts
|
ARM: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants
|
2022-04-24 21:23:16 +08:00 |
imx6dl-wandboard-revb1.dts
|
|
|
imx6dl-wandboard-revd1.dts
|
|
|
imx6dl-wandboard.dts
|
|
|
imx6dl-yapp4-common.dtsi
|
ARM: dts: imx6dl-yapp4: Remove unneeded status "okay"
|
2023-03-27 10:26:45 +08:00 |
imx6dl-yapp4-draco.dts
|
|
|
imx6dl-yapp4-hydra.dts
|
|
|
imx6dl-yapp4-lynx.dts
|
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
|
2023-03-27 10:26:47 +08:00 |
imx6dl-yapp4-orion.dts
|
|
|
imx6dl-yapp4-phoenix.dts
|
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
|
2023-03-27 10:26:47 +08:00 |
imx6dl-yapp4-ursa.dts
|
|
|
imx6dl-yapp43-common.dtsi
|
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
|
2023-03-27 10:26:47 +08:00 |
imx6dl.dtsi
|
ARM: dts: imx6dl: add missing properties for sram
|
2022-09-05 09:27:34 +08:00 |
imx6q-apalis-eval.dts
|
ARM: dts: apalis-imx6: Disable usb over-current
|
2022-12-31 15:33:19 +08:00 |
imx6q-apalis-ixora-v1.1.dts
|
ARM: dts: imx6q-apalis: Add support for Toradex Ixora V1.2 carrier boards
|
2022-06-20 09:12:38 +08:00 |
imx6q-apalis-ixora-v1.2.dts
|
ARM: dts: apalis-imx6: Disable usb over-current
|
2022-12-31 15:33:19 +08:00 |
imx6q-apalis-ixora.dts
|
ARM: dts: apalis-imx6: Disable usb over-current
|
2022-12-31 15:33:19 +08:00 |
imx6q-apf6dev.dts
|
|
|
imx6q-arm2.dts
|
ARM: dts: imx6: delete interrupts property if interrupts-extended is set
|
2022-08-21 11:20:17 +08:00 |
imx6q-b450v3.dts
|
ARM: dts: imx: bx50v3: Define GPIO line names
|
2021-03-15 14:13:43 +08:00 |
imx6q-b650v3.dts
|
ARM: dts: imx: bx50v3: Define GPIO line names
|
2021-03-15 14:13:43 +08:00 |
imx6q-b850v3.dts
|
ARM: dts: imx: bx50v3: Define GPIO line names
|
2021-03-15 14:13:43 +08:00 |
imx6q-ba16.dtsi
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6q-bosch-acc.dts
|
ARM: dts: imx6q-bosch-acc: Replace 'enable-sdio-wakeup'
|
2022-06-27 15:43:47 +08:00 |
imx6q-bx50v3.dtsi
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6q-cm-fx6.dts
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6q-cubox-i-emmc-som-v15.dts
|
|
|
imx6q-cubox-i-som-v15.dts
|
|
|
imx6q-cubox-i.dts
|
|
|
imx6q-dfi-fs700-m60.dts
|
|
|
imx6q-dhcom-pdk2.dts
|
ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2
|
2021-08-09 15:36:08 +08:00 |
imx6q-display5-tianma-tm070-1280x768.dts
|
|
|
imx6q-display5.dtsi
|
|
|
imx6q-dmo-edmqmx6.dts
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6q-dms-ba16.dts
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6q-ds.dts
|
ARM: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board support
|
2021-05-23 10:22:44 +08:00 |
imx6q-emcon-avari.dts
|
|
|
imx6q-evi.dts
|
ARM: dts: imx6: delete interrupts property if interrupts-extended is set
|
2022-08-21 11:20:17 +08:00 |
imx6q-gk802.dts
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
imx6q-gw51xx.dts
|
|
|
imx6q-gw52xx.dts
|
|
|
imx6q-gw53xx.dts
|
|
|
imx6q-gw54xx.dts
|
|
|
imx6q-gw551x.dts
|
|
|
imx6q-gw552x.dts
|
|
|
imx6q-gw553x.dts
|
|
|
imx6q-gw560x.dts
|
|
|
imx6q-gw5400-a.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6q-gw5903.dts
|
|
|
imx6q-gw5904.dts
|
|
|
imx6q-gw5907.dts
|
|
|
imx6q-gw5910.dts
|
|
|
imx6q-gw5912.dts
|
|
|
imx6q-gw5913.dts
|
|
|
imx6q-h100.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6q-hummingboard-emmc-som-v15.dts
|
|
|
imx6q-hummingboard-som-v15.dts
|
|
|
imx6q-hummingboard.dts
|
|
|
imx6q-hummingboard2-emmc-som-v15.dts
|
|
|
imx6q-hummingboard2-som-v15.dts
|
|
|
imx6q-hummingboard2.dts
|
|
|
imx6q-icore-mipi.dts
|
|
|
imx6q-icore-ofcap10.dts
|
|
|
imx6q-icore-ofcap12.dts
|
|
|
imx6q-icore-rqs.dts
|
|
|
imx6q-icore.dts
|
|
|
imx6q-kontron-samx6i.dtsi
|
|
|
imx6q-kp-tpc.dts
|
|
|
imx6q-kp.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6q-logicpd.dts
|
|
|
imx6q-marsboard.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6q-mba6.dtsi
|
ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees
|
2021-12-06 08:51:14 +08:00 |
imx6q-mba6a.dts
|
ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees
|
2021-12-06 08:51:14 +08:00 |
imx6q-mba6b.dts
|
ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees
|
2021-12-06 08:51:14 +08:00 |
imx6q-mccmon6.dts
|
ARM: dts: imx6q-mccmon6: Add fsl,err006687-workaround-present property
|
2022-08-21 11:23:18 +08:00 |
imx6q-nitrogen6_max.dts
|
|
|
imx6q-nitrogen6_som2.dts
|
|
|
imx6q-nitrogen6x.dts
|
|
|
imx6q-novena.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx6q-phytec-mira-rdk-emmc.dts
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6q-phytec-mira-rdk-nand.dts
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6q-phytec-pbab01.dts
|
|
|
imx6q-phytec-pfla02.dtsi
|
|
|
imx6q-pico-dwarf.dts
|
|
|
imx6q-pico-hobbit.dts
|
|
|
imx6q-pico-nymph.dts
|
|
|
imx6q-pico-pi.dts
|
|
|
imx6q-pinfunc.h
|
|
|
imx6q-pistachio.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx6q-prti6q.dts
|
ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties
|
2022-11-19 11:20:15 +08:00 |
imx6q-prtwd2.dts
|
ARM: dts: imx6q-prtwd2: configure ethernet reference clock parent
|
2023-03-06 10:01:46 +08:00 |
imx6q-rex-pro.dts
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6q-sabreauto.dts
|
|
|
imx6q-sabrelite.dts
|
ARM: dts: imx6-sabrelite: change to use SPDX identifiers
|
2022-08-21 15:48:41 +08:00 |
imx6q-sabresd.dts
|
|
|
imx6q-savageboard.dts
|
|
|
imx6q-sbc6x.dts
|
|
|
imx6q-skov-revc-lt2.dts
|
ARM: dts: imx6: skov: provide panel support for lt2 variants
|
2021-10-05 14:12:40 +08:00 |
imx6q-skov-revc-lt6.dts
|
ARM: dts: add SKOV imx6q and imx6dl based boards
|
2021-08-14 13:26:33 +08:00 |
imx6q-skov-reve-mi1010ait-1cp1.dts
|
ARM: dts: imx6: skov: add pwm-regulator to control the panel's VCOM
|
2022-06-19 09:41:35 +08:00 |
imx6q-solidsense.dts
|
ARM: dts: add SolidRun SolidSense support
|
2021-07-15 19:00:49 +08:00 |
imx6q-tbs2910.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6q-tqma6a.dtsi
|
|
|
imx6q-tqma6b.dtsi
|
|
|
imx6q-ts4900.dts
|
|
|
imx6q-ts7970.dts
|
|
|
imx6q-tx6q-10x0-mb7.dts
|
|
|
imx6q-tx6q-11x0-mb7.dts
|
|
|
imx6q-tx6q-1010-comtft.dts
|
|
|
imx6q-tx6q-1010.dts
|
|
|
imx6q-tx6q-1020-comtft.dts
|
|
|
imx6q-tx6q-1020.dts
|
|
|
imx6q-tx6q-1036-mb7.dts
|
|
|
imx6q-tx6q-1036.dts
|
|
|
imx6q-tx6q-1110.dts
|
|
|
imx6q-udoo.dts
|
|
|
imx6q-utilite-pro.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx6q-var-dt6customboard.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx6q-vicut1.dts
|
ARM: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants
|
2022-04-24 21:23:16 +08:00 |
imx6q-wandboard-revb1.dts
|
|
|
imx6q-wandboard-revd1.dts
|
|
|
imx6q-wandboard.dts
|
|
|
imx6q-yapp4-crux.dts
|
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
|
2022-10-29 16:26:31 +08:00 |
imx6q-yapp4-pegasus.dts
|
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
|
2023-03-27 10:26:47 +08:00 |
imx6q-zii-rdu2.dts
|
|
|
imx6q.dtsi
|
ARM: dts: imx6q: add missing properties for sram
|
2022-09-05 09:27:19 +08:00 |
imx6qdl-apalis.dtsi
|
ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names
|
2023-01-26 08:27:12 +08:00 |
imx6qdl-apf6.dtsi
|
|
|
imx6qdl-apf6dev.dtsi
|
|
|
imx6qdl-aristainetos.dtsi
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6qdl-aristainetos2.dtsi
|
ARM: DT changes for 5.19, part 1
|
2022-05-26 10:28:12 -07:00 |
imx6qdl-colibri.dtsi
|
ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names
|
2023-01-26 08:27:12 +08:00 |
imx6qdl-cubox-i.dtsi
|
|
|
imx6qdl-dfi-fs700-m60.dtsi
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6qdl-dhcom-drc02.dtsi
|
ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layer
|
2021-12-16 17:30:21 +08:00 |
imx6qdl-dhcom-pdk2.dtsi
|
ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
|
2022-08-22 10:37:36 +08:00 |
imx6qdl-dhcom-picoitx.dtsi
|
ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board
|
2021-08-09 15:37:52 +08:00 |
imx6qdl-dhcom-som.dtsi
|
ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
|
2022-08-22 10:37:36 +08:00 |
imx6qdl-ds.dtsi
|
ARM: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board support
|
2021-05-23 10:22:44 +08:00 |
imx6qdl-emcon-avari.dtsi
|
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
|
2021-05-23 13:36:59 +08:00 |
imx6qdl-emcon.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw51xx.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw52xx.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw53xx.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw54xx.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw551x.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw552x.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw553x.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw560x.dtsi
|
SoC: DT changes for 6.3
|
2023-02-20 15:49:56 -08:00 |
imx6qdl-gw5903.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw5904.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw5907.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw5910.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw5912.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-gw5913.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-hummingboard.dtsi
|
|
|
imx6qdl-hummingboard2-emmc.dtsi
|
|
|
imx6qdl-hummingboard2.dtsi
|
|
|
imx6qdl-icore-1.5.dtsi
|
|
|
imx6qdl-icore-rqs.dtsi
|
|
|
imx6qdl-icore.dtsi
|
|
|
imx6qdl-kontron-samx6i.dtsi
|
ARM: devicetree updates for 6.1
|
2022-10-06 11:13:04 -07:00 |
imx6qdl-mba6.dtsi
|
ARM: dts: imx6qdl-mba6: don't use multiple blank lines
|
2022-08-21 15:49:09 +08:00 |
imx6qdl-mba6a.dtsi
|
ARM: dts: imx6qdl-mba6: Move rtc alias to common location
|
2022-02-13 10:30:39 +08:00 |
imx6qdl-mba6b.dtsi
|
ARM: dts: imx6qdl: tqma6: Add i2c bus recovery
|
2022-02-13 10:30:52 +08:00 |
imx6qdl-nit6xlite.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-nitrogen6_max.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-nitrogen6_som2.dtsi
|
ARM: dts: imx6: delete interrupts property if interrupts-extended is set
|
2022-08-21 11:20:17 +08:00 |
imx6qdl-nitrogen6x.dtsi
|
ARM: dts: imx6: delete interrupts property if interrupts-extended is set
|
2022-08-21 11:20:17 +08:00 |
imx6qdl-phytec-mira-peb-av-02.dtsi
|
ARM: dts: imx6qdl: phytec: no spaces at start of line, indent use tabs
|
2022-08-21 15:49:12 +08:00 |
imx6qdl-phytec-mira-peb-eval-01.dtsi
|
ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board
|
2021-12-16 18:09:21 +08:00 |
imx6qdl-phytec-mira-peb-wlbt-05.dtsi
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6qdl-phytec-mira.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-phytec-pbab01.dtsi
|
ARM: dts: imx6: pbab01: Set USB OTG port to peripheral
|
2021-03-30 16:33:16 +08:00 |
imx6qdl-phytec-pfla02.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-phytec-phycore-som.dtsi
|
ARM: dts: imx6qdl-phytec: handle unneeded MFD-subdevices correctly
|
2022-02-11 12:42:57 +08:00 |
imx6qdl-pico-dwarf.dtsi
|
|
|
imx6qdl-pico-hobbit.dtsi
|
|
|
imx6qdl-pico-nymph.dtsi
|
|
|
imx6qdl-pico-pi.dtsi
|
|
|
imx6qdl-pico.dtsi
|
media: ARM: dts: imx6qdl-pico: Drop clock-names property
|
2022-11-25 06:46:26 +00:00 |
imx6qdl-prti6q.dtsi
|
ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3
|
2022-06-27 15:47:12 +08:00 |
imx6qdl-rex.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-sabreauto.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-sabrelite.dtsi
|
ARM: dts: imx6qdl-sabre: Add mmc aliases
|
2022-11-14 16:25:59 +08:00 |
imx6qdl-sabresd.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-savageboard.dtsi
|
|
|
imx6qdl-skov-cpu-revc.dtsi
|
ARM: dts: imx6: skov: migrate to resistive-adc-touch
|
2022-09-05 10:12:42 +08:00 |
imx6qdl-skov-cpu.dtsi
|
ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent
|
2023-03-06 10:01:46 +08:00 |
imx6qdl-skov-revc-lt2.dtsi
|
ARM: dts: imx6: skov: provide panel support for lt2 variants
|
2021-10-05 14:12:40 +08:00 |
imx6qdl-solidsense.dtsi
|
ARM: dts: add SolidRun SolidSense support
|
2021-07-15 19:00:49 +08:00 |
imx6qdl-sr-som-brcm.dtsi
|
|
|
imx6qdl-sr-som-emmc.dtsi
|
|
|
imx6qdl-sr-som-ti.dtsi
|
|
|
imx6qdl-sr-som.dtsi
|
ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9
|
2022-05-18 19:58:30 -07:00 |
imx6qdl-tqma6.dtsi
|
ARM: dts: imx6qdl: tqma6: Add i2c bus recovery
|
2022-02-13 10:30:52 +08:00 |
imx6qdl-tqma6a.dtsi
|
ARM: dts: imx6qdl-tqma6x: add fixed power supplies
|
2022-08-22 09:11:59 +08:00 |
imx6qdl-tqma6b.dtsi
|
ARM: dts: imx6qdl-tqma6x: add fixed power supplies
|
2022-08-22 09:11:59 +08:00 |
imx6qdl-ts4900.dtsi
|
|
|
imx6qdl-ts7970.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-tx6-lcd.dtsi
|
|
|
imx6qdl-tx6-lvds.dtsi
|
|
|
imx6qdl-tx6-mb7.dtsi
|
ARM: dts: imx: Rename RTC device tree nodes
|
2022-01-28 12:03:34 +08:00 |
imx6qdl-tx6.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6qdl-udoo.dtsi
|
ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues
|
2022-05-05 13:40:16 +08:00 |
imx6qdl-var-dart.dtsi
|
|
|
imx6qdl-vicut1-12inch.dtsi
|
ARM: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants
|
2022-04-24 21:23:16 +08:00 |
imx6qdl-vicut1.dtsi
|
ARM: devicetree updates for 6.1
|
2022-10-06 11:13:04 -07:00 |
imx6qdl-wandboard-revb1.dtsi
|
|
|
imx6qdl-wandboard-revc1.dtsi
|
|
|
imx6qdl-wandboard-revd1.dtsi
|
ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_EIM_D22 from hog group
|
2021-05-11 09:36:34 +08:00 |
imx6qdl-wandboard.dtsi
|
media: ARM: dts: imx6qdl-wandboard: Drop clock-names property
|
2022-11-25 06:46:46 +00:00 |
imx6qdl-zii-rdu2.dtsi
|
ARM: dts: imx: use generic node name for rave-sp
|
2023-01-26 19:40:18 +08:00 |
imx6qdl.dtsi
|
ARM: dts: imx6qdl: use enet_clk_ref instead of enet_out for the FEC node
|
2023-03-06 10:01:45 +08:00 |
imx6qp-mba6b.dts
|
ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees
|
2021-12-06 08:51:14 +08:00 |
imx6qp-nitrogen6_max.dts
|
|
|
imx6qp-nitrogen6_som2.dts
|
|
|
imx6qp-phytec-mira-rdk-nand.dts
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6qp-prtwd3.dts
|
ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch
|
2021-11-21 10:37:05 +08:00 |
imx6qp-sabreauto.dts
|
|
|
imx6qp-sabresd.dts
|
ARM: dts: imx6qp-sabresd: Enable PCIe support
|
2022-02-22 14:57:30 +08:00 |
imx6qp-tqma6b.dtsi
|
|
|
imx6qp-tx6qp-8037-mb7.dts
|
|
|
imx6qp-tx6qp-8037.dts
|
|
|
imx6qp-tx6qp-8137-mb7.dts
|
|
|
imx6qp-tx6qp-8137.dts
|
|
|
imx6qp-vicutp.dts
|
ARM: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants
|
2022-04-24 21:23:16 +08:00 |
imx6qp-wandboard-revd1.dts
|
|
|
imx6qp-yapp4-crux-plus.dts
|
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
|
2022-10-29 16:26:31 +08:00 |
imx6qp-yapp4-pegasus-plus.dts
|
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
|
2023-03-27 10:26:47 +08:00 |
imx6qp-zii-rdu2.dts
|
|
|
imx6qp.dtsi
|
ARM: dts: imx6qp: add missing properties for sram
|
2022-09-05 09:27:36 +08:00 |
imx6s-dhcom-drc02.dts
|
ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board
|
2021-08-09 15:39:58 +08:00 |
imx6sl-evk.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6sl-kobo-aura2.dts
|
ARM: dts: imx: Add devicetree for Kobo Aura 2
|
2022-10-24 09:16:31 +08:00 |
imx6sl-pinfunc.h
|
|
|
imx6sl-tolino-shine2hd.dts
|
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
|
2023-03-14 11:43:43 +08:00 |
imx6sl-tolino-shine3.dts
|
ARM: dts: imx: e60k02: Add touchscreen
|
2022-11-14 16:33:04 +08:00 |
imx6sl-tolino-vision.dts
|
ARM: dts: imx: Add devicetree for Tolino Vison
|
2023-03-27 10:44:15 +08:00 |
imx6sl-tolino-vision5.dts
|
ARM: dts: imx: e70k02: Add touchscreen
|
2023-01-26 08:03:52 +08:00 |
imx6sl-warp.dts
|
|
|
imx6sl.dtsi
|
ARM: dts: imx: update sdma node name format
|
2022-09-12 17:21:25 +08:00 |
imx6sll-evk.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6sll-kobo-clarahd.dts
|
ARM: dts: imx: e60k02: Add touchscreen
|
2022-11-14 16:33:04 +08:00 |
imx6sll-kobo-librah2o.dts
|
ARM: dts: imx: e70k02: Add touchscreen
|
2023-01-26 08:03:52 +08:00 |
imx6sll-pinfunc.h
|
|
|
imx6sll.dtsi
|
ARM: dts: imx6sll: add missing properties for sram
|
2022-09-05 09:27:41 +08:00 |
imx6sx-nitrogen6sx.dts
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6sx-pinfunc.h
|
|
|
imx6sx-sabreauto.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6sx-sdb-mqs.dts
|
|
|
imx6sx-sdb-reva.dts
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6sx-sdb-sai.dts
|
|
|
imx6sx-sdb.dts
|
ARM: dts: imx: align SPI NOR node name with dtschema
|
2022-04-11 14:07:47 +08:00 |
imx6sx-sdb.dtsi
|
ARM: dts: imx6: add wakeup support via magic packet
|
2021-01-18 17:36:15 +08:00 |
imx6sx-softing-vining-2000.dts
|
|
|
imx6sx-udoo-neo-basic.dts
|
|
|
imx6sx-udoo-neo-extended.dts
|
|
|
imx6sx-udoo-neo-full.dts
|
|
|
imx6sx-udoo-neo.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6sx.dtsi
|
ARM: dts: imx6sx: Drop dma-apb interrupt-names
|
2023-01-01 11:32:56 +08:00 |
imx6ul-14x14-evk.dts
|
|
|
imx6ul-14x14-evk.dtsi
|
ARM: dts: freescale: Use new media bus type macros
|
2023-01-25 10:11:22 +08:00 |
imx6ul-ccimx6ulsbcexpress.dts
|
|
|
imx6ul-ccimx6ulsbcpro.dts
|
|
|
imx6ul-ccimx6ulsom.dtsi
|
|
|
imx6ul-geam.dts
|
|
|
imx6ul-imx6ull-opos6ul.dtsi
|
|
|
imx6ul-imx6ull-opos6uldev.dtsi
|
ARM: dts: Remove "spidev" nodes
|
2021-12-20 16:01:40 +01:00 |
imx6ul-isiot-emmc.dts
|
|
|
imx6ul-isiot-nand.dts
|
|
|
imx6ul-isiot.dtsi
|
|
|
imx6ul-kontron-bl-43.dts
|
ARM: dts: imx6ul-kontron: Simplify devicetree structure
|
2022-08-22 10:22:34 +08:00 |
imx6ul-kontron-bl-common.dtsi
|
ARM: dts: imx6ul-kontron: Simplify devicetree structure
|
2022-08-22 10:22:34 +08:00 |
imx6ul-kontron-bl.dts
|
ARM: dts: imx6ul-kontron: Simplify devicetree structure
|
2022-08-22 10:22:34 +08:00 |
imx6ul-kontron-sl-common.dtsi
|
ARM: dts: imx6ul-kontron: Simplify devicetree structure
|
2022-08-22 10:22:34 +08:00 |
imx6ul-kontron-sl.dtsi
|
ARM: dts: imx6ul-kontron: Simplify devicetree structure
|
2022-08-22 10:22:34 +08:00 |
imx6ul-liteboard.dts
|
|
|
imx6ul-litesom.dtsi
|
|
|
imx6ul-opos6ul.dtsi
|
|
|
imx6ul-opos6uldev.dts
|
|
|
imx6ul-phytec-phycore-som.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6ul-phytec-segin-ff-rdk-emmc.dts
|
|
|
imx6ul-phytec-segin-ff-rdk-nand.dts
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6ul-phytec-segin-peb-av-02.dtsi
|
ARM: DT changes for 5.19, part 1
|
2022-05-26 10:28:12 -07:00 |
imx6ul-phytec-segin-peb-eval-01.dtsi
|
|
|
imx6ul-phytec-segin-peb-wlbt-05.dtsi
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6ul-phytec-segin.dtsi
|
ARM: imx6ul: drop the adc num-channels property
|
2022-06-12 11:27:31 +08:00 |
imx6ul-pico-dwarf.dts
|
ARM: dts: imx6ul-pico-dwarf: Use 'clock-frequency'
|
2022-12-31 15:13:47 +08:00 |
imx6ul-pico-hobbit.dts
|
|
|
imx6ul-pico-pi.dts
|
|
|
imx6ul-pico.dtsi
|
|
|
imx6ul-pinfunc.h
|
|
|
imx6ul-prti6g.dts
|
ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent
|
2023-03-06 10:01:47 +08:00 |
imx6ul-tqma6ul-common.dtsi
|
ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible
|
2023-01-09 16:03:59 +08:00 |
imx6ul-tqma6ul1-mba6ulx.dts
|
ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees
|
2022-04-06 21:01:09 +08:00 |
imx6ul-tqma6ul1.dtsi
|
ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees
|
2022-04-06 21:01:09 +08:00 |
imx6ul-tqma6ul2-mba6ulx.dts
|
ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees
|
2022-04-06 21:01:09 +08:00 |
imx6ul-tqma6ul2.dtsi
|
ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees
|
2022-04-06 21:01:09 +08:00 |
imx6ul-tqma6ul2l-mba6ulx.dts
|
ARM: dts: imx6ul: add TQ-Systems MBa6ULxL device trees
|
2022-04-06 21:01:20 +08:00 |
imx6ul-tqma6ul2l.dtsi
|
ARM: dts: fsl: adjust whitespace around '='
|
2022-06-12 11:01:44 +08:00 |
imx6ul-tqma6ulx-common.dtsi
|
ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees
|
2022-04-06 21:01:09 +08:00 |
imx6ul-tqma6ulxl-common.dtsi
|
ARM: dts: imx6ul: add TQ-Systems MBa6ULxL device trees
|
2022-04-06 21:01:20 +08:00 |
imx6ul-tx6ul-0010.dts
|
|
|
imx6ul-tx6ul-0011.dts
|
|
|
imx6ul-tx6ul-mainboard.dts
|
ARM: dts: imx: Rename RTC device tree nodes
|
2022-01-28 12:03:34 +08:00 |
imx6ul-tx6ul.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx6ul.dtsi
|
ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL
|
2023-03-06 10:01:46 +08:00 |
imx6ull-14x14-evk.dts
|
|
|
imx6ull-colibri-aster.dts
|
ARM: dts: colibri-imx6ull: enable default peripherals
|
2022-10-29 08:58:45 +08:00 |
imx6ull-colibri-aster.dtsi
|
ARM: dts: colibri-imx6ull: Disable usb over-current
|
2022-12-31 15:33:36 +08:00 |
imx6ull-colibri-emmc-aster.dts
|
ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards
|
2022-05-07 09:53:28 +08:00 |
imx6ull-colibri-emmc-eval-v3.dts
|
ARM: dts: colibri-imx6ull-emmc: add device tree
|
2021-10-05 11:27:01 +08:00 |
imx6ull-colibri-emmc-iris-v2.dts
|
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
|
2022-05-07 09:53:25 +08:00 |
imx6ull-colibri-emmc-iris.dts
|
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
|
2022-05-07 09:53:25 +08:00 |
imx6ull-colibri-emmc-nonwifi.dtsi
|
ARM: dts: imx6ull-colibri: add/update some comments
|
2022-05-07 09:53:32 +08:00 |
imx6ull-colibri-eval-v3.dts
|
ARM: dts: colibri-imx6ull: enable default peripherals
|
2022-10-29 08:58:45 +08:00 |
imx6ull-colibri-eval-v3.dtsi
|
ARM: dts: colibri-imx6ull: Disable usb over-current
|
2022-12-31 15:33:36 +08:00 |
imx6ull-colibri-iris-v2.dts
|
ARM: dts: colibri-imx6ull: add -hog to gpio hogs
|
2022-10-29 08:58:51 +08:00 |
imx6ull-colibri-iris-v2.dtsi
|
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
|
2022-05-07 09:53:25 +08:00 |
imx6ull-colibri-iris.dts
|
ARM: dts: colibri-imx6ull: enable default peripherals
|
2022-10-29 08:58:45 +08:00 |
imx6ull-colibri-iris.dtsi
|
ARM: dts: colibri-imx6ull: Disable usb over-current
|
2022-12-31 15:33:36 +08:00 |
imx6ull-colibri-nonwifi.dtsi
|
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
|
2022-05-07 09:53:25 +08:00 |
imx6ull-colibri-wifi-aster.dts
|
ARM: dts: colibri-imx6ull: enable default peripherals
|
2022-10-29 08:58:45 +08:00 |
imx6ull-colibri-wifi-eval-v3.dts
|
ARM: dts: colibri-imx6ull: enable default peripherals
|
2022-10-29 08:58:45 +08:00 |
imx6ull-colibri-wifi-iris-v2.dts
|
ARM: dts: colibri-imx6ull: add -hog to gpio hogs
|
2022-10-29 08:58:51 +08:00 |
imx6ull-colibri-wifi-iris.dts
|
ARM: dts: colibri-imx6ull: enable default peripherals
|
2022-10-29 08:58:45 +08:00 |
imx6ull-colibri-wifi.dtsi
|
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
|
2022-05-07 09:53:25 +08:00 |
imx6ull-colibri.dtsi
|
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
|
2023-04-05 22:31:31 +08:00 |
imx6ull-dhcom-drc02.dts
|
ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board
|
2023-01-30 09:57:12 +08:00 |
imx6ull-dhcom-pdk2.dts
|
ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board
|
2023-01-30 09:57:12 +08:00 |
imx6ull-dhcom-picoitx.dts
|
ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board
|
2023-01-30 09:57:12 +08:00 |
imx6ull-dhcom-som-cfg-sdcard.dtsi
|
ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board
|
2023-01-30 09:57:12 +08:00 |
imx6ull-dhcom-som.dtsi
|
ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board
|
2023-01-30 09:57:12 +08:00 |
imx6ull-dhcor-som.dtsi
|
ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board
|
2023-01-30 09:57:12 +08:00 |
imx6ull-jozacp.dts
|
ARM: dts: add JOZ Access Point
|
2021-12-06 08:49:51 +08:00 |
imx6ull-kontron-bl.dts
|
ARM: dts: imx6ul-kontron: Simplify devicetree structure
|
2022-08-22 10:22:34 +08:00 |
imx6ull-kontron-sl.dtsi
|
ARM: dts: imx6ul-kontron: Simplify devicetree structure
|
2022-08-22 10:22:34 +08:00 |
imx6ull-myir-mys-6ulx-eval.dts
|
ARM: dts: imx6ull: fix ubi filesystem mount failed
|
2021-03-18 12:06:28 +08:00 |
imx6ull-myir-mys-6ulx.dtsi
|
|
|
imx6ull-opos6ul.dtsi
|
|
|
imx6ull-opos6uldev.dts
|
|
|
imx6ull-phytec-phycore-som.dtsi
|
|
|
imx6ull-phytec-segin-ff-rdk-emmc.dts
|
|
|
imx6ull-phytec-segin-ff-rdk-nand.dts
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6ull-phytec-segin-lc-rdk-nand.dts
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6ull-phytec-segin-peb-av-02.dtsi
|
|
|
imx6ull-phytec-segin-peb-eval-01.dtsi
|
|
|
imx6ull-phytec-segin-peb-wlbt-05.dtsi
|
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
|
2021-12-17 10:43:55 +08:00 |
imx6ull-phytec-segin.dtsi
|
|
|
imx6ull-phytec-tauri-emmc.dts
|
ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULL
|
2022-04-06 21:07:04 +08:00 |
imx6ull-phytec-tauri-nand.dts
|
ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULL
|
2022-04-06 21:07:04 +08:00 |
imx6ull-phytec-tauri.dtsi
|
ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULL
|
2022-04-06 21:07:04 +08:00 |
imx6ull-pinfunc-snvs.h
|
|
|
imx6ull-pinfunc.h
|
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
|
2021-12-06 09:41:26 +08:00 |
imx6ull-tarragon-common.dtsi
|
ARM: dts: imx6ull: Add chargebyte Tarragon support
|
2023-04-06 09:45:27 +08:00 |
imx6ull-tarragon-master.dts
|
ARM: dts: imx6ull: Add chargebyte Tarragon support
|
2023-04-06 09:45:27 +08:00 |
imx6ull-tarragon-micro.dts
|
ARM: dts: imx6ull: Add chargebyte Tarragon support
|
2023-04-06 09:45:27 +08:00 |
imx6ull-tarragon-slave.dts
|
ARM: dts: imx6ull: Add chargebyte Tarragon support
|
2023-04-06 09:45:27 +08:00 |
imx6ull-tarragon-slavext.dts
|
ARM: dts: imx6ull: Add chargebyte Tarragon support
|
2023-04-06 09:45:27 +08:00 |
imx6ull-tqma6ull2-mba6ulx.dts
|
ARM: dts: imx6ull: add TQ-Systems MBa6ULLx device trees
|
2022-04-06 21:01:22 +08:00 |
imx6ull-tqma6ull2.dtsi
|
ARM: dts: fsl: adjust whitespace around '='
|
2022-06-12 11:01:44 +08:00 |
imx6ull-tqma6ull2l-mba6ulx.dts
|
ARM: dts: imx6ull: add TQ-Systems MBa6ULLxL device trees
|
2022-04-06 21:01:24 +08:00 |
imx6ull-tqma6ull2l.dtsi
|
ARM: dts: fsl: adjust whitespace around '='
|
2022-06-12 11:01:44 +08:00 |
imx6ull.dtsi
|
ARM: dts: imx: Pass a label to the soc node
|
2022-06-20 08:35:39 +08:00 |
imx6ulz-14x14-evk.dts
|
|
|
imx6ulz-bsh-smm-m2.dts
|
ARM: dts: imx6ulz-bsh-smm-m2: Support proper board power off
|
2022-06-11 20:57:55 +08:00 |
imx6ulz.dtsi
|
|
|
imx7-colibri-aster.dtsi
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7-colibri-eval-v3.dtsi
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7-colibri-iris-v2.dtsi
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7-colibri-iris.dtsi
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7-colibri.dtsi
|
ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names
|
2023-01-26 08:27:12 +08:00 |
imx7-mba7.dtsi
|
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
|
2022-02-11 11:55:41 +08:00 |
imx7-tqma7.dtsi
|
ARM: dts: imx7-tqma7: add SPI-NOR flash
|
2021-10-05 13:24:05 +08:00 |
imx7d-cl-som-imx7.dts
|
|
|
imx7d-colibri-aster.dts
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri-emmc-aster.dts
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri-emmc-eval-v3.dts
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri-emmc-iris-v2.dts
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri-emmc-iris.dts
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri-emmc.dtsi
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri-eval-v3.dts
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri-iris-v2.dts
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri-iris.dts
|
ARM: dts: colibri-imx7: Disable usb over-current
|
2022-12-31 15:33:39 +08:00 |
imx7d-colibri.dtsi
|
ARM: dts: imx7-colibri: add clarifying comments
|
2022-06-11 17:14:17 +08:00 |
imx7d-flex-concentrator-mfg.dts
|
|
|
imx7d-flex-concentrator.dts
|
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
|
2021-01-18 14:30:11 +08:00 |
imx7d-mba7.dts
|
ARM: dts: imx7-tqma7/mba7: correct spelling of "TQ-Systems"
|
2021-10-05 13:23:52 +08:00 |
imx7d-meerkat96.dts
|
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
|
2021-05-23 13:30:11 +08:00 |
imx7d-nitrogen7.dts
|
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
|
2022-02-11 11:55:41 +08:00 |
imx7d-pico-dwarf.dts
|
ARM: dts: imx7d-pico: Use 'clock-frequency'
|
2022-12-31 15:14:00 +08:00 |
imx7d-pico-hobbit.dts
|
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
|
2022-02-11 11:55:41 +08:00 |
imx7d-pico-nymph.dts
|
ARM: dts: imx7d-pico: Use 'clock-frequency'
|
2022-12-31 15:14:00 +08:00 |
imx7d-pico-pi.dts
|
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
|
2022-02-11 11:55:41 +08:00 |
imx7d-pico.dtsi
|
ARM: dts: imx7d-pico: indent use tabs, no spaces at start of line
|
2022-08-21 15:49:17 +08:00 |
imx7d-pinfunc.h
|
|
|
imx7d-remarkable2.dts
|
ARM: SoC devicetree changes for 6.4
|
2023-04-25 12:11:54 -07:00 |
imx7d-sbc-imx7.dts
|
|
|
imx7d-sdb-reva.dts
|
|
|
imx7d-sdb-sht11.dts
|
|
|
imx7d-sdb.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx7d-smegw01.dts
|
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
|
2023-01-26 15:38:05 +08:00 |
imx7d-tqma7.dtsi
|
ARM: dts: imx7-tqma7/mba7: correct spelling of "TQ-Systems"
|
2021-10-05 13:23:52 +08:00 |
imx7d-zii-rmu2.dts
|
ARM: dts: imx: use generic node name for rave-sp
|
2023-01-26 19:40:18 +08:00 |
imx7d-zii-rpu2.dts
|
ARM: dts: imx: use generic node name for rave-sp
|
2023-01-26 19:40:18 +08:00 |
imx7d.dtsi
|
ARM: dts: imx7d: add node for PXP
|
2023-03-06 10:01:28 +08:00 |
imx7s-colibri-aster.dts
|
ARM: dts: imx7-colibri: improve licensing and compatible strings
|
2022-06-11 17:13:14 +08:00 |
imx7s-colibri-eval-v3.dts
|
ARM: dts: imx7-colibri: add clarifying comments
|
2022-06-11 17:14:17 +08:00 |
imx7s-colibri-iris-v2.dts
|
ARM: dts: imx7-colibri: add support for Toradex Iris carrier boards
|
2022-06-11 17:14:33 +08:00 |
imx7s-colibri-iris.dts
|
ARM: dts: imx7-colibri: add support for Toradex Iris carrier boards
|
2022-06-11 17:14:33 +08:00 |
imx7s-colibri.dtsi
|
ARM: dts: imx7-colibri: add clarifying comments
|
2022-06-11 17:14:17 +08:00 |
imx7s-mba7.dts
|
ARM: dts: imx7-tqma7/mba7: correct spelling of "TQ-Systems"
|
2021-10-05 13:23:52 +08:00 |
imx7s-tqma7.dtsi
|
ARM: dts: imx7-tqma7/mba7: correct spelling of "TQ-Systems"
|
2021-10-05 13:23:52 +08:00 |
imx7s-warp.dts
|
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
|
2022-02-11 11:55:41 +08:00 |
imx7s.dtsi
|
ARM: dts: imx7s: correct iomuxc gpr mux controller cells
|
2023-01-30 08:47:49 +08:00 |
imx7ulp-com.dts
|
|
|
imx7ulp-evk.dts
|
|
|
imx7ulp-pinfunc.h
|
|
|
imx7ulp.dtsi
|
ARM64: dts: imx7ulp: update usb compatible
|
2023-03-29 10:25:40 +02:00 |
imx23-evk.dts
|
ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group
|
2022-01-28 13:59:21 +08:00 |
imx23-olinuxino.dts
|
|
|
imx23-pinfunc.h
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
|
2022-06-10 14:51:35 +02:00 |
imx23-sansa.dts
|
|
|
imx23-stmp378x_devb.dts
|
|
|
imx23-xfi3.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx23.dtsi
|
ARM: dts: mxs: Drop dma-apb interrupt-names
|
2023-01-01 11:32:41 +08:00 |
imx25-eukrea-cpuimx25.dtsi
|
|
|
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
|
|
|
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
|
|
|
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
|
|
|
imx25-eukrea-mbimxsd25-baseboard.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx25-karo-tx25.dts
|
|
|
imx25-pdk.dts
|
|
|
imx25-pinfunc.h
|
ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F]
|
2021-05-11 09:38:51 +08:00 |
imx25.dtsi
|
ARM: dts: imx: update sdma node name format
|
2022-09-12 17:21:25 +08:00 |
imx27-apf27.dts
|
|
|
imx27-apf27dev.dts
|
|
|
imx27-eukrea-cpuimx27.dtsi
|
|
|
imx27-eukrea-mbimxsd27-baseboard.dts
|
|
|
imx27-pdk.dts
|
|
|
imx27-phytec-phycard-s-rdk.dts
|
|
|
imx27-phytec-phycard-s-som.dtsi
|
|
|
imx27-phytec-phycore-rdk.dts
|
|
|
imx27-phytec-phycore-som.dtsi
|
|
|
imx27-pinfunc.h
|
ARM: dts: imx: Fix typo in pinfunc comments
|
2021-11-23 19:55:03 +08:00 |
imx27.dtsi
|
ARM: dts: imx: Pass a label to the AIPS nodes
|
2022-06-20 08:35:51 +08:00 |
imx28-apf28.dts
|
ARM: dts: imx28-apf28: Convert to use label references
|
2023-03-14 14:41:45 +08:00 |
imx28-apf28dev.dts
|
ARM: dts: imx28-apf28: Convert to use label references
|
2023-03-14 14:41:45 +08:00 |
imx28-apx4devkit.dts
|
ARM: dts: imx28-apx4devkit: Convert to use label references
|
2023-03-14 14:42:31 +08:00 |
imx28-cfa10036.dts
|
ARM: dts: imx28-cfa10036: Convert to use label references
|
2023-03-14 14:42:34 +08:00 |
imx28-cfa10037.dts
|
|
|
imx28-cfa10049.dts
|
ARM: dts: imx28-cfa10036: Convert to use label references
|
2023-03-14 14:42:34 +08:00 |
imx28-cfa10055.dts
|
ARM: dts: imx28-cfa10036: Convert to use label references
|
2023-03-14 14:42:34 +08:00 |
imx28-cfa10056.dts
|
ARM: dts: imx28-cfa10036: Convert to use label references
|
2023-03-14 14:42:34 +08:00 |
imx28-cfa10057.dts
|
ARM: dts: imx28-cfa10036: Convert to use label references
|
2023-03-14 14:42:34 +08:00 |
imx28-cfa10058.dts
|
ARM: dts: imx28-cfa10036: Convert to use label references
|
2023-03-14 14:42:34 +08:00 |
imx28-duckbill-2-485.dts
|
ARM: dts: imx28-duckbill-2: Include base board
|
2023-03-14 14:42:39 +08:00 |
imx28-duckbill-2-enocean.dts
|
ARM: dts: imx28-duckbill-2: Include base board
|
2023-03-14 14:42:39 +08:00 |
imx28-duckbill-2-spi.dts
|
ARM: dts: imx28-duckbill-2: Include base board
|
2023-03-14 14:42:39 +08:00 |
imx28-duckbill-2.dts
|
ARM: dts: imx28-duckbill: Convert to use label references
|
2023-03-14 14:42:37 +08:00 |
imx28-duckbill.dts
|
ARM: dts: imx28-duckbill: Convert to use label references
|
2023-03-14 14:42:37 +08:00 |
imx28-eukrea-mbmx28lc.dtsi
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx28-eukrea-mbmx283lc.dts
|
|
|
imx28-eukrea-mbmx287lc.dts
|
|
|
imx28-evk.dts
|
ARM: dts: imx28-evk: Convert to use label references
|
2023-03-14 14:42:42 +08:00 |
imx28-lwe.dtsi
|
ARM: dts: imx28: Add DTS description of imx28 based XEA board
|
2021-05-22 20:37:09 +08:00 |
imx28-m28.dtsi
|
ARM: dts: imx28-m28/sps1: Convert to use label references
|
2023-03-14 14:42:28 +08:00 |
imx28-m28cu3.dts
|
ARM: dts: imx28-m28/sps1: Convert to use label references
|
2023-03-14 14:42:28 +08:00 |
imx28-m28evk.dts
|
ARM: dts: imx28-m28/sps1: Convert to use label references
|
2023-03-14 14:42:28 +08:00 |
imx28-pinfunc.h
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
|
2022-06-10 14:51:35 +02:00 |
imx28-sps1.dts
|
ARM: dts: imx28-m28/sps1: Convert to use label references
|
2023-03-14 14:42:28 +08:00 |
imx28-ts4600.dts
|
ARM: dts: imx28-ts4600: Convert to use label references
|
2023-03-14 14:42:45 +08:00 |
imx28-tx28.dts
|
ARM: dts: imx28-tx28: add SPDX-License-Identifier
|
2023-03-14 14:42:47 +08:00 |
imx28-xea.dts
|
ARM: dts: imx28: Add DTS description of imx28 based XEA board
|
2021-05-22 20:37:09 +08:00 |
imx28.dtsi
|
ARM: dts: mxs: Drop dma-apb interrupt-names
|
2023-01-01 11:32:41 +08:00 |
imx31-bug.dts
|
|
|
imx31-lite.dts
|
|
|
imx31.dtsi
|
ARM: dts: imx: update sdma node name format
|
2022-09-12 17:21:25 +08:00 |
imx35-eukrea-cpuimx35.dtsi
|
|
|
imx35-eukrea-mbimxsd35-baseboard.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx35-pdk.dts
|
|
|
imx35-pinfunc.h
|
|
|
imx35.dtsi
|
ARM: dts: imx: update sdma node name format
|
2022-09-12 17:21:25 +08:00 |
imx50-evk.dts
|
|
|
imx50-kobo-aura.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx50-pinfunc.h
|
|
|
imx50.dtsi
|
ARM: dts: imx: update sdma node name format
|
2022-09-12 17:21:25 +08:00 |
imx51-apf51.dts
|
|
|
imx51-apf51dev.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-08-22 09:17:31 +08:00 |
imx51-babbage.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx51-digi-connectcore-jsk.dts
|
ARM: dts: i.MX51: digi-connectcore-jsk: Use usb-nop-xceiv usbphy for USB1
|
2022-04-26 09:16:56 +08:00 |
imx51-digi-connectcore-som.dtsi
|
ARM: dts: i.MX51: digi-connectcore-som: Setup usbotg vbus-supply
|
2022-04-26 09:16:56 +08:00 |
imx51-eukrea-cpuimx51.dtsi
|
|
|
imx51-eukrea-mbimxsd51-baseboard.dts
|
|
|
imx51-pinfunc.h
|
|
|
imx51-ts4800.dts
|
ARM: dts: fsl: adjust whitespace around '='
|
2022-06-12 11:01:44 +08:00 |
imx51-zii-rdu1.dts
|
ARM: dts: imx: use generic node name for rave-sp
|
2023-01-26 19:40:18 +08:00 |
imx51-zii-scu2-mezz.dts
|
ARM: dts: imx: use generic node name for rave-sp
|
2023-01-26 19:40:18 +08:00 |
imx51-zii-scu3-esb.dts
|
ARM: dts: imx: use generic node name for rave-sp
|
2023-01-26 19:40:18 +08:00 |
imx51.dtsi
|
ARM: dts: imx51: Fix sram.yaml warnings
|
2022-12-31 15:00:13 +08:00 |
imx53-ard.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx53-cx9020.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx53-kp-ddc.dts
|
|
|
imx53-kp-hsc.dts
|
|
|
imx53-kp.dtsi
|
|
|
imx53-m53.dtsi
|
|
|
imx53-m53evk.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx53-m53menlo.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx53-mba53.dts
|
|
|
imx53-pinfunc.h
|
|
|
imx53-ppd.dts
|
ARM: dts: imx: Fix pca9547 i2c-mux node name
|
2022-12-31 20:38:09 +08:00 |
imx53-qsb-common.dtsi
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx53-qsb.dts
|
|
|
imx53-qsrb.dts
|
|
|
imx53-sk-imx53.dts
|
ARM: dts: imx: Add support for SK-iMX53 board
|
2023-01-09 16:01:03 +08:00 |
imx53-smd.dts
|
ARM: dts: imx: align gpio-keys node names with dtschema
|
2022-08-22 09:17:33 +08:00 |
imx53-tqma53.dtsi
|
|
|
imx53-tx53-x03x.dts
|
|
|
imx53-tx53-x13x.dts
|
|
|
imx53-tx53.dtsi
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx53-usbarmory.dts
|
ARM: dts: imx: align LED node names with dtschema
|
2022-12-31 19:42:54 +08:00 |
imx53-voipac-bsb.dts
|
|
|
imx53-voipac-dmm-668.dtsi
|
|
|
imx53.dtsi
|
ARM: dts: imx53: Fix sram.yaml warnings
|
2022-12-31 15:00:02 +08:00 |
imxrt1050-evk.dts
|
ARM: dts: imx: Add i.MXRT1050-EVK support
|
2022-05-06 20:26:43 +08:00 |
imxrt1050-pinfunc.h
|
ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header
|
2022-01-28 17:48:50 +08:00 |
imxrt1050.dtsi
|
ARM: dts: imxrt1050: increase mmc max-frequency property
|
2022-12-31 21:24:39 +08:00 |
imxrt1170-pinfunc.h
|
ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header
|
2022-07-26 10:06:41 +02:00 |
integrator.dtsi
|
ARM: dts: arm: align UART node name with bindings
|
2023-01-26 11:19:57 +01:00 |
integratorap-im-pd1.dts
|
ARM: dts: arm: align UART node name with bindings
|
2023-01-26 11:19:57 +01:00 |
integratorap.dts
|
ARM: dts: arm: align UART node name with bindings
|
2023-01-26 11:19:57 +01:00 |
integratorcp.dts
|
ARM: dts: arm: align UART node name with bindings
|
2023-01-26 11:19:57 +01:00 |
intel-ixp4xx-reference-design.dtsi
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp4xx.dtsi
|
ARM: dts: Add Goramo MultiLink device tree
|
2021-12-06 02:16:42 +01:00 |
intel-ixp42x-adi-coyote.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-arcom-vulcan.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-dlink-dsm-g600.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-freecom-fsg-3.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-gateway-7001.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-gateworks-gw2348.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-goramo-multilink.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-iomega-nas100d.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-ixdp425.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-ixdpg425.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-linksys-nslu2.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-linksys-wrv54g.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-netgear-wg302v1.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x-welltech-epbx100.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp42x.dtsi
|
ARM: dts: ixp42x: Expand syscon register range
|
2022-02-12 21:54:00 +01:00 |
intel-ixp43x-gateworks-gw2358.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp43x-kixrp435.dts
|
ARM: dts: ixp4xx: use "okay" for status
|
2023-03-17 15:43:52 +01:00 |
intel-ixp43x.dtsi
|
ARM: dts: ixp4xx: Use the expansion bus
|
2021-08-09 01:55:10 +02:00 |
intel-ixp45x-ixp46x.dtsi
|
ARM: dts: Add PTP timesource to the IXP456x
|
2021-09-08 16:41:12 +02:00 |
intel-ixp46x-ixdp465.dts
|
ARM: dts: ixp4xx: Add Intel IXDP425 etc reference designs
|
2021-08-09 01:55:42 +02:00 |
iwg20d-q7-common.dtsi
|
ARM: dts: renesas: Align GPIO hog names with dtschema
|
2022-02-24 13:51:48 +01:00 |
iwg20d-q7-dbcm-ca.dtsi
|
|
|
keystone-clocks.dtsi
|
|
|
keystone-k2e-clocks.dtsi
|
|
|
keystone-k2e-evm.dts
|
ARM: dts: ti: use "okay" for status
|
2023-03-12 18:00:43 +01:00 |
keystone-k2e-netcp.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
keystone-k2e.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
keystone-k2g-evm.dts
|
ARM: dts: ti: use "okay" for status
|
2023-03-12 18:00:43 +01:00 |
keystone-k2g-ice.dts
|
ARM: dts: keystone: Align SPI NOR node name with dtschema
|
2022-04-22 13:48:18 -05:00 |
keystone-k2g-netcp.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
keystone-k2g.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
keystone-k2hk-clocks.dtsi
|
|
|
keystone-k2hk-evm.dts
|
ARM: dts: ti: use "okay" for status
|
2023-03-12 18:00:43 +01:00 |
keystone-k2hk-netcp.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
keystone-k2hk.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
keystone-k2l-clocks.dtsi
|
|
|
keystone-k2l-evm.dts
|
ARM: dts: ti: use "okay" for status
|
2023-03-12 18:00:43 +01:00 |
keystone-k2l-netcp.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
keystone-k2l.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
keystone.dtsi
|
ARM: dts: keystone: Adjust whitespace around '='
|
2022-06-17 20:24:35 -05:00 |
kirkwood-98dx4122.dtsi
|
ARM: dts: kirkwood: Add definitions for PCIe error interrupts
|
2022-09-02 16:53:46 +02:00 |
kirkwood-6192.dtsi
|
ARM: dts: kirkwood: Add definitions for PCIe error interrupts
|
2022-09-02 16:53:46 +02:00 |
kirkwood-6281.dtsi
|
ARM: dts: kirkwood: Add definitions for PCIe error interrupts
|
2022-09-02 16:53:46 +02:00 |
kirkwood-6282.dtsi
|
ARM: dts: kirkwood: Add definitions for PCIe error interrupts
|
2022-09-02 16:53:46 +02:00 |
kirkwood-b3.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-blackarmor-nas220.dts
|
|
|
kirkwood-c200-v1.dts
|
ARM: dts: kirkwood: Add Ctera C-200 V1 board
|
2022-02-28 17:23:18 +01:00 |
kirkwood-cloudbox.dts
|
|
|
kirkwood-d2net.dts
|
|
|
kirkwood-db-88f6281.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-db-88f6282.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-db.dtsi
|
|
|
kirkwood-dir665.dts
|
ARM: dts: kirkwood: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
kirkwood-dns320.dts
|
|
|
kirkwood-dns325.dts
|
|
|
kirkwood-dnskw.dtsi
|
|
|
kirkwood-dockstar.dts
|
|
|
kirkwood-dreamplug.dts
|
|
|
kirkwood-ds109.dts
|
|
|
kirkwood-ds110jv10.dts
|
|
|
kirkwood-ds111.dts
|
|
|
kirkwood-ds112.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-ds209.dts
|
|
|
kirkwood-ds210.dts
|
|
|
kirkwood-ds212.dts
|
|
|
kirkwood-ds212j.dts
|
|
|
kirkwood-ds409.dts
|
|
|
kirkwood-ds409slim.dts
|
|
|
kirkwood-ds411.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-ds411j.dts
|
|
|
kirkwood-ds411slim.dts
|
|
|
kirkwood-goflexnet.dts
|
|
|
kirkwood-guruplug-server-plus.dts
|
|
|
kirkwood-ib62x0.dts
|
|
|
kirkwood-iconnect.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-iomega_ix2_200.dts
|
|
|
kirkwood-is2.dts
|
|
|
kirkwood-km_common.dtsi
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-km_fixedeth.dts
|
|
|
kirkwood-km_kirkwood.dts
|
|
|
kirkwood-l-50.dts
|
ARM: dts: kirkwood: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
kirkwood-laplug.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-linkstation-6282.dtsi
|
|
|
kirkwood-linkstation-duo-6281.dtsi
|
|
|
kirkwood-linkstation-lsqvl.dts
|
|
|
kirkwood-linkstation-lsvl.dts
|
|
|
kirkwood-linkstation-lswsxl.dts
|
|
|
kirkwood-linkstation-lswvl.dts
|
|
|
kirkwood-linkstation-lswxl.dts
|
|
|
kirkwood-linkstation.dtsi
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-linksys-viper.dts
|
ARM: dts: kirkwood: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
kirkwood-lschlv2.dts
|
|
|
kirkwood-lsxhl.dts
|
|
|
kirkwood-lsxl.dtsi
|
ARM: dts: kirkwood: lsxl: remove first ethernet port
|
2022-09-02 16:13:41 +02:00 |
kirkwood-mplcec4.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-mv88f6281gtw-ge.dts
|
ARM: dts: kirkwood: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
kirkwood-nas2big.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-net2big.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-net5big.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-netgear_readynas_duo_v2.dts
|
|
|
kirkwood-netgear_readynas_nv+_v2.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-netxbig.dtsi
|
|
|
kirkwood-ns2-common.dtsi
|
|
|
kirkwood-ns2.dts
|
|
|
kirkwood-ns2lite.dts
|
|
|
kirkwood-ns2max.dts
|
|
|
kirkwood-ns2mini.dts
|
|
|
kirkwood-nsa3x0-common.dtsi
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-nsa310.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-nsa310a.dts
|
|
|
kirkwood-nsa310s.dts
|
ARM: dts: kirkwood: Add Zyxel NSA310S board
|
2022-11-28 00:52:29 +01:00 |
kirkwood-nsa320.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-nsa325.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-openblocks_a6.dts
|
|
|
kirkwood-openblocks_a7.dts
|
|
|
kirkwood-openrd-base.dts
|
|
|
kirkwood-openrd-client.dts
|
|
|
kirkwood-openrd-ultimate.dts
|
|
|
kirkwood-openrd.dtsi
|
|
|
kirkwood-pogo_e02.dts
|
|
|
kirkwood-pogoplug-series-4.dts
|
|
|
kirkwood-rd88f6192.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-rd88f6281-a.dts
|
|
|
kirkwood-rd88f6281-z0.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-rd88f6281.dtsi
|
ARM: dts: kirkwood: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
kirkwood-rs212.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-rs409.dts
|
|
|
kirkwood-rs411.dts
|
|
|
kirkwood-sheevaplug-common.dtsi
|
|
|
kirkwood-sheevaplug-esata.dts
|
|
|
kirkwood-sheevaplug.dts
|
|
|
kirkwood-synology.dtsi
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-t5325.dts
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-topkick.dts
|
|
|
kirkwood-ts219-6281.dts
|
|
|
kirkwood-ts219-6282.dts
|
|
|
kirkwood-ts219.dtsi
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
kirkwood-ts419-6281.dts
|
|
|
kirkwood-ts419-6282.dts
|
|
|
kirkwood-ts419.dtsi
|
|
|
kirkwood.dtsi
|
ARM: dts: kirkwood: correct indentation
|
2022-10-26 12:52:50 -04:00 |
lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
|
ARM: dts: kswitch-d10: enable networking
|
2022-05-13 16:42:43 +03:00 |
lan966x-kontron-kswitch-d10-mmt-8g.dts
|
ARM: dts: kswitch-d10: enable networking
|
2022-05-13 16:42:43 +03:00 |
lan966x-kontron-kswitch-d10-mmt.dtsi
|
ARM: DT changes for 6.0
|
2022-08-02 08:15:25 -07:00 |
lan966x-pcb8290.dts
|
ARM: dts: lan966x: Add interrupt support for PHYs on pcb8290
|
2022-10-24 19:18:38 +03:00 |
lan966x-pcb8291.dts
|
ARM: dts: lan966x: Enable sgpio on pcb8291
|
2022-10-31 10:35:14 +02:00 |
lan966x-pcb8309.dts
|
ARM: dts: lan966x: disable aes
|
2022-09-14 10:23:42 +03:00 |
lan966x.dtsi
|
ARM: dts: lan966x: Add otp support
|
2022-11-25 11:11:50 +02:00 |
logicpd-som-lv-35xx-devkit.dts
|
ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
|
2022-04-14 11:38:44 +03:00 |
logicpd-som-lv-37xx-devkit.dts
|
ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
|
2022-04-14 11:38:44 +03:00 |
logicpd-som-lv-baseboard.dtsi
|
|
|
logicpd-som-lv.dtsi
|
ARM: DT changes for 5.19, part 1
|
2022-05-26 10:28:12 -07:00 |
logicpd-torpedo-35xx-devkit.dts
|
ARM: dts: logicpd-torpedo: Add isp1763 support to baseboard
|
2022-02-18 10:30:02 +02:00 |
logicpd-torpedo-37xx-devkit-28.dts
|
|
|
logicpd-torpedo-37xx-devkit.dts
|
ARM: dts: logicpd-torpedo: Add isp1763 support to baseboard
|
2022-02-18 10:30:02 +02:00 |
logicpd-torpedo-baseboard.dtsi
|
ARM: dts: Unify pwm-omap-dmtimer node names
|
2022-11-22 14:15:09 +02:00 |
logicpd-torpedo-som.dtsi
|
ARM: dts: logicpd: align LED node names with dtschema
|
2022-12-01 18:02:23 +01:00 |
lpc18xx.dtsi
|
ARM: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
|
2022-06-24 19:15:32 +02:00 |
lpc32xx.dtsi
|
ARM: dts: lpc32xx: trim addresses to 8 digits
|
2022-11-18 09:58:17 +01:00 |
lpc3250-ea3250.dts
|
|
|
lpc3250-phy3250.dts
|
|
|
lpc4337-ciaa.dts
|
|
|
lpc4350-hitex-eval.dts
|
|
|
lpc4350.dtsi
|
|
|
lpc4357-ea4357-devkit.dts
|
|
|
lpc4357-myd-lpc4357.dts
|
|
|
lpc4357.dtsi
|
|
|
ls1021a-iot.dts
|
ARM: dts: fsl: adjust whitespace around '='
|
2022-06-12 11:01:44 +08:00 |
ls1021a-moxa-uc-8410a.dts
|
ARM: dts: ls1021: correct indentation
|
2022-10-24 10:18:09 +08:00 |
ls1021a-qds.dts
|
ARM: dts: ls1021a-qds: change fpga to simple-mfd device
|
2021-10-15 11:16:49 +08:00 |
ls1021a-tsn.dts
|
ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch
|
2021-11-21 10:37:12 +08:00 |
ls1021a-twr.dts
|
ARM: dts: ls1021a: remove regulators simple-bus
|
2021-10-15 11:16:39 +08:00 |
ls1021a.dtsi
|
ARM: dts: ls1021a: Disable CAN nodes by default
|
2023-01-26 15:36:31 +08:00 |
Makefile
|
- added D1 crypto node
|
2023-04-14 17:42:28 +02:00 |
mba6ulx.dtsi
|
ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible
|
2023-01-09 16:03:59 +08:00 |
meson.dtsi
|
ARM: dts: meson: adjust whitespace around '='
|
2022-06-10 08:34:15 +02:00 |
meson6-atv1200.dts
|
|
|
meson6.dtsi
|
|
|
meson8-minix-neo-x8.dts
|
ARM: dts: meson: align LED node names with dtschema
|
2023-01-02 10:45:14 +01:00 |
meson8.dtsi
|
ARM: dts: meson8: add the SDXC_A pins
|
2023-03-22 11:35:32 +01:00 |
meson8b-ec100.dts
|
ARM: dts: meson: align LED node names with dtschema
|
2023-01-02 10:45:14 +01:00 |
meson8b-mxq.dts
|
ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties
|
2021-07-26 10:05:36 +02:00 |
meson8b-odroidc1.dts
|
USB / Thunderbolt driver changes for 6.3-rc1
|
2023-02-24 12:07:00 -08:00 |
meson8b.dtsi
|
arm: dts: meson: adjust order of some compatibles
|
2023-03-06 10:20:33 +01:00 |
meson8m2-mxiii-plus.dts
|
ARM: dts: meson8m2: mxiii-plus: Enable Bluetooth and WiFi support
|
2023-03-22 11:35:32 +01:00 |
meson8m2.dtsi
|
|
|
milbeaut-m10v-evb.dts
|
|
|
milbeaut-m10v.dtsi
|
ARM: dts: milbeaut: set clock phandle to uart node
|
2021-11-22 13:50:47 +01:00 |
mmp2-brownstone.dts
|
|
|
mmp2-olpc-xo-1-75.dts
|
ARM: dts: mmp2-olpc-xo-1-75: Use symbolic names for audio clocks
|
2021-02-02 18:14:00 +01:00 |
mmp2.dtsi
|
ARM: dts: pxa: use new 'dma-channels/requests' properties
|
2022-05-27 16:07:34 +02:00 |
mmp3-dell-ariel.dts
|
ARM: dts: mmp3-dell-ariel: Replace SSP2 with spi-gpio
|
2021-02-02 18:14:00 +01:00 |
mmp3.dtsi
|
ARM: dts: mmp3: Fix the CCIC interrupts
|
2021-02-02 18:14:01 +01:00 |
motorola-cpcap-mapphone.dtsi
|
ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing
|
2021-03-24 18:31:09 +02:00 |
motorola-mapphone-common.dtsi
|
ARM: dts: Unify pwm-omap-dmtimer node names
|
2022-11-22 14:15:09 +02:00 |
moxart-uc7112lx.dts
|
ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
|
2022-09-08 16:13:44 +02:00 |
moxart.dtsi
|
ARM: dts: moxart: align UART node name with bindings
|
2023-01-26 11:21:58 +01:00 |
mpa1600.dts
|
|
|
mps2-an385.dts
|
|
|
mps2-an399.dts
|
|
|
mps2.dtsi
|
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
|
2021-10-26 17:20:41 +02:00 |
mstar-infinity-breadbee-common.dtsi
|
ARM: mstar: Unify common parts of BreadBee boards into a dtsi
|
2021-01-22 17:40:48 +01:00 |
mstar-infinity-msc313-breadbee_crust.dts
|
ARM: mstar: Unify common parts of BreadBee boards into a dtsi
|
2021-01-22 17:40:48 +01:00 |
mstar-infinity-msc313.dtsi
|
|
|
mstar-infinity.dtsi
|
ARM: mstar: Add OPP table for infinity
|
2022-02-16 19:27:48 +01:00 |
mstar-infinity2m-ssd20xd.dtsi
|
ARM: dts: mstar: Set gpio compatible for ssd20xd
|
2022-02-11 23:00:23 +09:00 |
mstar-infinity2m-ssd201-som2d01.dtsi
|
ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W
|
2022-02-11 23:00:24 +09:00 |
mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
|
ARM: dts: mstar: Add board for 100ask DongShanPiOne
|
2022-02-11 23:00:25 +09:00 |
mstar-infinity2m-ssd202d-miyoo-mini.dts
|
ARM: dts: mstar: Add a dts for Miyoo Mini
|
2022-02-11 23:00:24 +09:00 |
mstar-infinity2m-ssd202d-ssd201htv2.dts
|
|
|
mstar-infinity2m-ssd202d-unitv2.dts
|
ARM: dts: mstar: Add a dts for M5Stack UnitV2
|
2021-04-19 17:02:23 +02:00 |
mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
|
ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W
|
2022-02-11 23:00:24 +09:00 |
mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
|
ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W
|
2022-02-11 23:00:24 +09:00 |
mstar-infinity2m-ssd202d.dtsi
|
|
|
mstar-infinity2m.dtsi
|
ARM: mstar: Extend opp_table for infinity2m
|
2022-02-16 19:27:48 +01:00 |
mstar-infinity3-msc313e-breadbee.dts
|
ARM: mstar: Unify common parts of BreadBee boards into a dtsi
|
2021-01-22 17:40:48 +01:00 |
mstar-infinity3-msc313e.dtsi
|
|
|
mstar-infinity3.dtsi
|
ARM: mstar: Add OPP table for infinity3
|
2022-02-16 19:27:48 +01:00 |
mstar-mercury5-ssc8336n-midrived08.dts
|
|
|
mstar-mercury5-ssc8336n.dtsi
|
|
|
mstar-mercury5.dtsi
|
|
|
mstar-v7.dtsi
|
ARM: dts: mstar: align UART node name with bindings
|
2023-01-25 11:38:03 +01:00 |
mt2701-evb.dts
|
|
|
mt2701-pinfunc.h
|
|
|
mt2701.dtsi
|
arm: dts: mediatek: Fix existing NAND controller node name
|
2023-03-06 14:35:17 +01:00 |
mt6323.dtsi
|
|
|
mt6580-evbp1.dts
|
|
|
mt6580.dtsi
|
|
|
mt6582-prestigio-pmt5008-3g.dts
|
ARM: dts: Add initial support for Prestigio PMT5008 3G tablet
|
2022-01-24 18:09:02 +01:00 |
mt6582.dtsi
|
ARM: dts: Add initial support for Mediatek mt6582
|
2022-01-24 18:09:02 +01:00 |
mt6589-aquaris5.dts
|
|
|
mt6589-fairphone-fp1.dts
|
arm: dts: mt6589: Add device tree for Fairphone 1
|
2021-11-15 17:41:21 +01:00 |
mt6589.dtsi
|
arm: dts: mt6589: Add device tree for Fairphone 1
|
2021-11-15 17:41:21 +01:00 |
mt6592-evb.dts
|
|
|
mt6592.dtsi
|
|
|
mt7623.dtsi
|
ARM: dts: mediatek: Remove pins-are-numbered property
|
2023-01-09 17:17:19 +01:00 |
mt7623a-rfb-emmc.dts
|
ARM: dts: mediatek: align gpio-key node names with dtschema
|
2022-06-17 12:44:05 +02:00 |
mt7623a-rfb-nand.dts
|
ARM: dts: mediatek: align gpio-key node names with dtschema
|
2022-06-17 12:44:05 +02:00 |
mt7623a.dtsi
|
arm: dts: mt7623: add musb device nodes
|
2021-09-20 14:00:24 +02:00 |
mt7623n-bananapi-bpi-r2.dts
|
arm: dts: mt7623: disable home key on Bananapi BPI-R2
|
2023-03-06 14:35:17 +01:00 |
mt7623n-rfb-emmc.dts
|
ARM: dts: mediatek: align gpio-key node names with dtschema
|
2022-06-17 12:44:05 +02:00 |
mt7623n.dtsi
|
arm: dts: mediatek: Get rid of mediatek, larb for MM nodes
|
2022-04-22 15:49:12 +02:00 |
mt7629-rfb.dts
|
ARM: dts: mediatek: align gpio-key node names with dtschema
|
2022-06-17 12:44:05 +02:00 |
mt7629.dtsi
|
arm: dts: mt7629: Remove extra interrupt from timer node
|
2023-01-09 17:17:19 +01:00 |
mt8127-moose.dts
|
|
|
mt8127.dtsi
|
|
|
mt8135-evbp1.dts
|
|
|
mt8135.dtsi
|
ARM: dts: mediatek: Remove pins-are-numbered property
|
2023-01-09 17:17:19 +01:00 |
mvebu-linkstation-fan.dtsi
|
|
|
mvebu-linkstation-gpio-simple.dtsi
|
|
|
mxs-pinfunc.h
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
|
2022-06-10 14:51:35 +02:00 |
nspire-classic.dtsi
|
ARM: dts: nspire: use lower case hex addresses in node unit addresses
|
2022-04-07 21:29:38 +02:00 |
nspire-clp.dts
|
|
|
nspire-cx.dts
|
ARM: dts: nspire: use lower case hex addresses in node unit addresses
|
2022-04-07 21:29:38 +02:00 |
nspire-tp.dts
|
|
|
nspire.dtsi
|
ARM: dts: nspire: use lower case hex addresses in node unit addresses
|
2022-04-07 21:29:38 +02:00 |
nuvoton-common-npcm7xx.dtsi
|
ARM: new SoC support for 6.0
|
2022-08-02 08:29:18 -07:00 |
nuvoton-npcm730-gbs.dts
|
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
|
2022-11-20 20:49:09 +10:30 |
nuvoton-npcm730-gsj-gpio.dtsi
|
|
|
nuvoton-npcm730-gsj.dts
|
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
|
2022-11-20 20:49:09 +10:30 |
nuvoton-npcm730-kudo.dts
|
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
|
2022-11-20 20:49:09 +10:30 |
nuvoton-npcm730.dtsi
|
|
|
nuvoton-npcm750-evb.dts
|
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
|
2022-11-20 20:49:09 +10:30 |
nuvoton-npcm750-pincfg-evb.dtsi
|
|
|
nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
|
|
|
nuvoton-npcm750-runbmc-olympus.dts
|
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
|
2022-11-20 20:49:09 +10:30 |
nuvoton-npcm750.dtsi
|
ARM: dts: nuvoton: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
|
ARM: dts: nuvoton: wpcm450: Add missing aliases for serial0/serial1
|
2022-11-22 12:07:20 +10:30 |
nuvoton-wpcm450.dtsi
|
ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
|
2023-02-01 17:10:45 +01:00 |
omap-gpmc-smsc911x.dtsi
|
ARM: dts: omap: correct indentation
|
2022-10-26 12:53:16 -04:00 |
omap-gpmc-smsc9221.dtsi
|
ARM: dts: omap: correct indentation
|
2022-10-26 12:53:16 -04:00 |
omap-zoom-common.dtsi
|
ARM: dts: omap: align UART node name with bindings
|
2023-03-12 17:58:43 +01:00 |
omap2.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
omap3-beagle-ab4.dts
|
ARM: dts: Fix timer regression for beagleboard revision c
|
2021-12-17 14:15:43 +02:00 |
omap3-beagle-xm-ab.dts
|
|
|
omap3-beagle-xm.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-beagle.dts
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-cm-t3x.dtsi
|
|
|
omap3-cm-t3x30.dtsi
|
|
|
omap3-cm-t3517.dts
|
ARM: dts: omap: correct indentation
|
2022-10-26 12:53:16 -04:00 |
omap3-cm-t3530.dts
|
|
|
omap3-cm-t3730.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-cpu-thermal.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
omap3-devkit8000-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-devkit8000-lcd-common.dtsi
|
|
|
omap3-devkit8000-lcd43.dts
|
|
|
omap3-devkit8000-lcd70.dts
|
|
|
omap3-devkit8000.dts
|
ARM: dts: switch timer config to common devkit8000 devicetree
|
2022-02-18 10:07:14 +02:00 |
omap3-echo.dts
|
ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED
|
2022-12-01 18:02:48 +01:00 |
omap3-evm-37xx.dts
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap3-evm-common.dtsi
|
|
|
omap3-evm-processor-common.dtsi
|
ARM: dts: omap3: align gpio hog names with dt-schema
|
2021-05-27 15:06:57 +03:00 |
omap3-evm.dts
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap3-gta04.dtsi
|
ARM: dts: omap3-gta04: fix compatible record for GTA04 board
|
2023-03-27 11:16:20 +03:00 |
omap3-gta04a3.dts
|
|
|
omap3-gta04a4.dts
|
|
|
omap3-gta04a5.dts
|
ARM: dts: omap: gta04a5: cleanup i2c node names
|
2023-01-19 10:34:39 +02:00 |
omap3-gta04a5one.dts
|
|
|
omap3-ha-common.dtsi
|
|
|
omap3-ha-lcd.dts
|
|
|
omap3-ha.dts
|
|
|
omap3-igep.dtsi
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap3-igep0020-common.dtsi
|
ARM: dts: omap3-igep: Change email address in copyright notice
|
2021-01-26 13:20:52 +02:00 |
omap3-igep0020-rev-f.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-igep0020.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-igep0030-common.dtsi
|
ARM: dts: omap3-igep: Change email address in copyright notice
|
2021-01-26 13:20:52 +02:00 |
omap3-igep0030-rev-g.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-igep0030.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-ldp.dts
|
ARM: dts: omap: correct indentation
|
2022-10-26 12:53:16 -04:00 |
omap3-lilly-a83x.dtsi
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap3-lilly-dbb056.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-n9.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-n900.dts
|
ARM: dts: n900: use iio driver for accelerometer
|
2023-01-19 10:33:25 +02:00 |
omap3-n950-n9.dtsi
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap3-n950.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-alto35-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-overo-alto35.dts
|
|
|
omap3-overo-base.dtsi
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap3-overo-chestnut43-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-overo-chestnut43.dts
|
|
|
omap3-overo-common-dvi.dtsi
|
|
|
omap3-overo-common-lcd35.dtsi
|
|
|
omap3-overo-common-lcd43.dtsi
|
|
|
omap3-overo-common-peripherals.dtsi
|
|
|
omap3-overo-gallop43-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-overo-gallop43.dts
|
|
|
omap3-overo-palo35-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-overo-palo35.dts
|
|
|
omap3-overo-palo43-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-overo-palo43.dts
|
|
|
omap3-overo-storm-alto35.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-storm-chestnut43.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-storm-gallop43.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-storm-palo35.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-storm-palo43.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-storm-summit.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-storm-tobi.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-storm-tobiduo.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-overo-storm.dtsi
|
|
|
omap3-overo-summit-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-overo-summit.dts
|
|
|
omap3-overo-tobi-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap3-overo-tobi.dts
|
|
|
omap3-overo-tobiduo-common.dtsi
|
ARM: dts: omap: fix gpmc,mux-add-data type
|
2021-10-11 12:31:54 +03:00 |
omap3-overo-tobiduo.dts
|
|
|
omap3-overo.dtsi
|
|
|
omap3-pandora-1ghz.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-pandora-600mhz.dts
|
|
|
omap3-pandora-common.dtsi
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap3-panel-sharp-ls037v7dw01.dtsi
|
|
|
omap3-sb-t35.dtsi
|
ARM: dts: omap: Fix boolean properties gpmc,cycle2cycle-{same|diff}csen
|
2021-10-11 12:31:53 +03:00 |
omap3-sbc-t3517.dts
|
|
|
omap3-sbc-t3530.dts
|
|
|
omap3-sbc-t3730.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-sniper.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3-tao3530.dtsi
|
ARM: dts: Remove "spidev" nodes
|
2021-12-20 16:01:40 +01:00 |
omap3-thunder.dts
|
|
|
omap3-zoom3.dts
|
ARM: dts: omap: Drop ti,omap36xx compatible
|
2023-03-28 10:20:42 +03:00 |
omap3.dtsi
|
ARM: dts: Update omap3 musb to probe with ti-sysc
|
2022-11-22 13:25:18 +02:00 |
omap3xxx-clocks.dtsi
|
ARM: dts: Group omap3 CM_CLKSEL1_EMU clocks
|
2022-05-03 09:15:44 +03:00 |
omap4-cpu-thermal.dtsi
|
ARM: dts: omap: correct indentation
|
2022-10-26 12:53:16 -04:00 |
omap4-droid-bionic-xt875.dts
|
|
|
omap4-droid4-xt894.dts
|
ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
|
2021-01-25 10:24:26 +02:00 |
omap4-duovero-parlor.dts
|
|
|
omap4-duovero.dtsi
|
|
|
omap4-kc1.dts
|
|
|
omap4-l4-abe.dtsi
|
ARM: dts: omap4-l4-abe: Add McASP configuration
|
2021-07-27 11:47:42 +03:00 |
omap4-l4.dtsi
|
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
|
2021-05-27 15:12:33 +03:00 |
omap4-mcpdm.dtsi
|
|
|
omap4-panda-a4.dts
|
|
|
omap4-panda-common.dtsi
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap4-panda-es.dts
|
ARM: dts: omap: align LED node names with dtschema
|
2022-12-01 18:02:48 +01:00 |
omap4-panda.dts
|
|
|
omap4-sdp-es23plus.dts
|
|
|
omap4-sdp.dts
|
|
|
omap4-var-dvk-om44.dts
|
|
|
omap4-var-om44customboard.dtsi
|
|
|
omap4-var-som-om44-wlan.dtsi
|
|
|
omap4-var-som-om44.dtsi
|
|
|
omap4-var-stk-om44.dts
|
|
|
omap4.dtsi
|
ARM: OMAP2+: Drop legacy platform data for omap4 l3
|
2021-03-10 14:04:37 +02:00 |
omap5-board-common.dtsi
|
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
|
2021-07-27 11:14:55 +03:00 |
omap5-cm-t54.dts
|
ARM: dts: omap: correct indentation
|
2022-10-26 12:53:16 -04:00 |
omap5-core-thermal.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
omap5-gpu-thermal.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
omap5-igep0050.dts
|
ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards
|
2022-04-21 14:02:57 +03:00 |
omap5-l4-abe.dtsi
|
|
|
omap5-l4.dtsi
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap5-sbc-t54.dts
|
|
|
omap5-uevm.dts
|
ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards
|
2022-04-21 14:02:57 +03:00 |
omap5.dtsi
|
ARM: OMAP2+: Drop legacy platform data for omap5 l3
|
2021-03-10 14:05:02 +02:00 |
omap24xx-clocks.dtsi
|
|
|
omap34xx-omap36xx-clocks.dtsi
|
ARM: dts: Group omap3 CM_FCLKEN_CAM clocks
|
2022-05-03 09:15:44 +03:00 |
omap34xx.dtsi
|
ARM: dts: Update omap3 musb to probe with ti-sysc
|
2022-11-22 13:25:18 +02:00 |
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: Group omap3 CM_FCLKEN_DSS clocks
|
2022-05-03 09:15:43 +03:00 |
omap36xx-clocks.dtsi
|
ARM: dts: Group omap3 CM_FCLKEN_PER clocks
|
2022-05-03 09:15:44 +03:00 |
omap36xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: Group omap3 CM_CLKSEL_WKUP clocks
|
2022-05-03 09:15:43 +03:00 |
omap36xx.dtsi
|
ARM: dts: Update omap3 musb to probe with ti-sysc
|
2022-11-22 13:25:18 +02:00 |
omap44xx-clocks.dtsi
|
ARM: dts: Drop custom clkctrl compatible and update omap4 l4per
|
2022-04-11 16:03:34 +03:00 |
omap54xx-clocks.dtsi
|
ARM: dts: Drop custom clkctrl compatible and update omap5 l4per
|
2022-04-11 16:03:35 +03:00 |
omap443x-clocks.dtsi
|
ARM: dts: Add clock-output-names for omap4
|
2022-04-11 16:03:34 +03:00 |
omap443x.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
omap446x-clocks.dtsi
|
ARM: dts: Add clock-output-names for omap4
|
2022-04-11 16:03:34 +03:00 |
omap2420-clocks.dtsi
|
|
|
omap2420-h4.dts
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap2420-n8x0-common.dtsi
|
|
|
omap2420-n800.dts
|
|
|
omap2420-n810-wimax.dts
|
|
|
omap2420-n810.dts
|
|
|
omap2420.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
omap2430-clocks.dtsi
|
|
|
omap2430-sdp.dts
|
ARM: dts: omap: Fix boolean properties gpmc,cycle2cycle-{same|diff}csen
|
2021-10-11 12:31:53 +03:00 |
omap2430.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
omap3430-sdp.dts
|
ARM: dts: omap: adjust whitespace around '='
|
2022-06-27 10:41:59 +02:00 |
omap3430es1-clocks.dtsi
|
ARM: dts: Group omap3 CM_FCLKEN_DSS clocks
|
2022-05-03 09:15:43 +03:00 |
omap4460.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
openbmc-flash-layout-64-alt.dtsi
|
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
|
2021-12-21 15:02:27 +10:30 |
openbmc-flash-layout-64.dtsi
|
ARM: dts: Fix OpenBMC flash layout label addresses
|
2022-01-31 17:17:06 +10:30 |
openbmc-flash-layout-128.dtsi
|
|
|
openbmc-flash-layout.dtsi
|
ARM: dts: Fix OpenBMC flash layout label addresses
|
2022-01-31 17:17:06 +10:30 |
orion5x-kuroboxpro.dts
|
|
|
orion5x-lacie-d2-network.dts
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
orion5x-lacie-ethernet-disk-mini-v2.dts
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
orion5x-linkstation-lschl.dts
|
|
|
orion5x-linkstation-lsgl.dts
|
|
|
orion5x-linkstation-lswtgl.dts
|
|
|
orion5x-linkstation.dtsi
|
|
|
orion5x-lswsgl.dts
|
|
|
orion5x-maxtor-shared-storage-2.dts
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
orion5x-mv88f5181.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
orion5x-mv88f5182.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
orion5x-netgear-wnr854t.dts
|
ARM: dts: orion5: Add missing phy-mode and fixed links
|
2023-04-07 17:28:24 +02:00 |
orion5x-rd88f5182-nas.dts
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
orion5x.dtsi
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE (part 1)
|
2022-06-10 14:51:35 +02:00 |
owl-s500-cubieboard6.dts
|
arm: dts: owl-s500: Set CMU clocks for UARTs
|
2020-12-31 13:05:06 +05:30 |
owl-s500-guitar-bb-rev-b.dts
|
arm: dts: owl-s500: Set CMU clocks for UARTs
|
2020-12-31 13:05:06 +05:30 |
owl-s500-guitar.dtsi
|
|
|
owl-s500-labrador-base-m.dts
|
arm: dts: owl-s500: Set CMU clocks for UARTs
|
2020-12-31 13:05:06 +05:30 |
owl-s500-labrador-v2.dtsi
|
|
|
owl-s500-roseapplepi.dts
|
ARM: dts: owl-s500-roseapplepi: Add ethernet support
|
2021-08-02 15:22:55 +02:00 |
owl-s500-sparky.dts
|
arm: dts: owl-s500: Set CMU clocks for UARTs
|
2020-12-31 13:05:06 +05:30 |
owl-s500.dtsi
|
ARM: dts: owl-s500: Add ethernet support
|
2021-08-02 15:22:55 +02:00 |
pm9g45.dts
|
|
|
pxa2xx.dtsi
|
|
|
pxa3xx.dtsi
|
ARM: dts: pxa: use new 'dma-channels/requests' properties
|
2022-05-27 16:07:34 +02:00 |
pxa25x.dtsi
|
ARM: dts: pxa: use new 'dma-channels/requests' properties
|
2022-05-27 16:07:34 +02:00 |
pxa27x.dtsi
|
ARM: dts: pxa: use new 'dma-channels/requests' properties
|
2022-05-27 16:07:34 +02:00 |
pxa168-aspenite.dts
|
|
|
pxa168.dtsi
|
ARM: dts: pxa168: add timer reset and clock
|
2022-12-04 13:03:48 +01:00 |
pxa300-raumfeld-common.dtsi
|
ARM: dts: pxa: adjust whitespace around '='
|
2022-06-16 13:44:43 -07:00 |
pxa300-raumfeld-connector.dts
|
|
|
pxa300-raumfeld-controller.dts
|
|
|
pxa300-raumfeld-speaker-l.dts
|
|
|
pxa300-raumfeld-speaker-m.dts
|
|
|
pxa300-raumfeld-speaker-one.dts
|
|
|
pxa300-raumfeld-speaker-s.dts
|
|
|
pxa300-raumfeld-tuneable-clock.dtsi
|
|
|
pxa910-dkb.dts
|
|
|
pxa910.dtsi
|
|
|
qcom-apq8016-sbc.dts
|
ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32
|
2021-12-13 16:51:46 -06:00 |
qcom-apq8026-asus-sparrow.dts
|
ARM: dts: qcom: align RPM regulators node name with bindings
|
2022-10-17 13:19:59 -05:00 |
qcom-apq8026-huawei-sturgeon.dts
|
ARM: dts: qcom: Add support for Huawei Watch
|
2022-11-05 21:42:42 -05:00 |
qcom-apq8026-lg-lenok.dts
|
ARM: dts: qcom: apq8026-lg-lenok: add missing reserved memory
|
2023-03-09 12:12:16 -08:00 |
qcom-apq8026-samsung-matisse-wifi.dts
|
ARM: dts: qcom: apq8026-samsung-matisse-wifi: Add display backlight
|
2023-01-11 13:15:14 -06:00 |
qcom-apq8060-dragonboard.dts
|
ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema
|
2023-02-08 17:34:19 -08:00 |
qcom-apq8064-asus-nexus7-flo.dts
|
ARM: dts: qcom: add missing space before {
|
2023-01-10 22:49:00 -06:00 |
qcom-apq8064-cm-qs600.dts
|
ARM: dts: qcom: apq8064-cm-qs600: pull SDCC pwrseq node up one level
|
2022-10-17 13:20:00 -05:00 |
qcom-apq8064-ifc6410.dts
|
ARM: dts: qcom: apq8064-ifc6410: pull SDCC pwrseq node up one level
|
2022-10-17 13:20:00 -05:00 |
qcom-apq8064-pins.dtsi
|
arm/arm64: dts: qcom: Fix boolean properties with values
|
2022-04-07 14:04:36 +02:00 |
qcom-apq8064-sony-xperia-lagan-yuga.dts
|
ARM: dts: qcom: add 'chassis-type' property
|
2022-10-17 17:22:10 -05:00 |
qcom-apq8064-v2.0.dtsi
|
|
|
qcom-apq8064.dtsi
|
ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges
|
2023-03-15 17:24:47 -07:00 |
qcom-apq8074-dragonboard.dts
|
ARM: dts: qcom: msm8974: clean up USB nodes
|
2022-12-05 16:35:46 -06:00 |
qcom-apq8084-ifc6540.dts
|
ARM: dts: qcom: apq8084-ifc6540: fix overriding SDHCI
|
2022-12-28 10:46:34 -06:00 |
qcom-apq8084-mtp.dts
|
|
|
qcom-apq8084.dtsi
|
ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes
|
2023-03-15 16:41:10 -07:00 |
qcom-ipq4018-ap120c-ac-bit.dts
|
ARM: dts: qcom: align LED node names with dtschema
|
2022-12-05 16:29:09 -06:00 |
qcom-ipq4018-ap120c-ac.dts
|
ARM: dts: qcom: align LED node names with dtschema
|
2022-12-05 16:29:09 -06:00 |
qcom-ipq4018-ap120c-ac.dtsi
|
ARM: dts: qcom: ipq4018-ap120c-ac: use NVMEM for ath10k caldata
|
2023-03-13 17:13:37 -07:00 |
qcom-ipq4018-jalapeno.dts
|
ARM: dts: qcom: ipq4018-jalapeno: Add SoC compatible
|
2022-11-05 22:24:25 -05:00 |
qcom-ipq4019-ap.dk01.1-c1.dts
|
ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts
|
2021-10-23 23:15:43 -05:00 |
qcom-ipq4019-ap.dk01.1.dtsi
|
ARM: dts: qcom: use GPIO flags for tlmm
|
2022-08-29 17:17:26 -05:00 |
qcom-ipq4019-ap.dk04.1-c1.dts
|
ARM: dts: qcom: ipq4019: User generic node name for DMA
|
2022-04-12 19:36:17 -05:00 |
qcom-ipq4019-ap.dk04.1-c3.dts
|
ARM: dts: qcom: fill secondary compatible for multiple boards
|
2021-09-19 23:17:25 -05:00 |
qcom-ipq4019-ap.dk04.1.dtsi
|
ARM: dts: qcom: use GPIO flags for tlmm
|
2022-08-29 17:17:26 -05:00 |
qcom-ipq4019-ap.dk07.1-c1.dts
|
ARM: dts: qcom: use GPIO flags for tlmm
|
2022-08-29 17:17:26 -05:00 |
qcom-ipq4019-ap.dk07.1-c2.dts
|
ARM: dts: qcom: fill secondary compatible for multiple boards
|
2021-09-19 23:17:25 -05:00 |
qcom-ipq4019-ap.dk07.1.dtsi
|
ARM: dts: qcom: ipq4019: User generic node name for DMA
|
2022-04-12 19:36:17 -05:00 |
qcom-ipq4019.dtsi
|
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
|
2023-03-15 17:24:47 -07:00 |
qcom-ipq8062-smb208.dtsi
|
ARM: dts: qcom: ipq8064: add ipq8062 variant
|
2022-08-29 16:16:18 -05:00 |
qcom-ipq8062.dtsi
|
ARM: dts: qcom: ipq8064: add ipq8062 variant
|
2022-08-29 16:16:18 -05:00 |
qcom-ipq8064-ap148.dts
|
ARM: dts: qcom: ipq8064: add multiple missing pin definition
|
2022-07-16 21:43:37 -05:00 |
qcom-ipq8064-rb3011.dts
|
ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port
|
2023-04-19 12:59:16 +01:00 |
qcom-ipq8064-smb208.dtsi
|
ARM: dts: qcom: ipq8064: add specific dtsi with smb208 rpm regulators
|
2022-07-16 21:43:51 -05:00 |
qcom-ipq8064-v1.0.dtsi
|
ARM: dts: qcom: ipq8064: add function to LED nodes
|
2022-06-30 22:18:25 -05:00 |
qcom-ipq8064-v2.0-smb208.dtsi
|
ARM: dts: qcom: ipq8064: add v2 dtsi variant
|
2022-08-29 16:16:18 -05:00 |
qcom-ipq8064-v2.0.dtsi
|
ARM: dts: qcom: ipq8064: add v2 dtsi variant
|
2022-08-29 16:16:18 -05:00 |
qcom-ipq8064.dtsi
|
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
|
2023-03-15 17:24:47 -07:00 |
qcom-ipq8065-smb208.dtsi
|
ARM: dts: qcom: ipq8064: add ipq8065 variant
|
2022-08-29 16:16:18 -05:00 |
qcom-ipq8065.dtsi
|
ARM: dts: qcom: ipq8064: add ipq8065 variant
|
2022-08-29 16:16:18 -05:00 |
qcom-mdm9615-wp8548-mangoh-green.dts
|
ARM: dts: qcom: mdm9615: wp8548-mangoh-green: fix sx150xq node names and probe-reset property
|
2022-11-06 21:08:53 -06:00 |
qcom-mdm9615-wp8548.dtsi
|
ARM: dts: qcom: mdm9615: align pinctrl subnodes with dt-schema bindings
|
2022-11-06 21:08:50 -06:00 |
qcom-mdm9615.dtsi
|
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
|
2023-03-15 16:41:09 -07:00 |
qcom-msm8226-samsung-s3ve3g.dts
|
ARM: dts: qcom: use "okay" for status
|
2023-02-08 14:53:54 -08:00 |
qcom-msm8226.dtsi
|
ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
|
2023-03-15 16:44:28 -07:00 |
qcom-msm8660-surf.dts
|
ARM: dts: qcom: msm8660-surf: move fixed regulator out of soc
|
2022-08-29 16:46:45 -05:00 |
qcom-msm8660.dtsi
|
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
|
2023-03-15 16:41:09 -07:00 |
qcom-msm8916-samsung-e5.dts
|
ARM: dts: qcom-msm8916-samsung-e2015: Include dts from arm64
|
2022-08-29 16:13:32 -05:00 |
qcom-msm8916-samsung-e7.dts
|
ARM: dts: qcom-msm8916-samsung-e2015: Include dts from arm64
|
2022-08-29 16:13:32 -05:00 |
qcom-msm8916-samsung-grandmax.dts
|
ARM: dts: qcom-msm8916-samsung-e2015: Include dts from arm64
|
2022-08-29 16:13:32 -05:00 |
qcom-msm8916-samsung-serranove.dts
|
ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64
|
2021-10-23 22:35:38 -05:00 |
qcom-msm8916-smp.dtsi
|
ARM: dts: qcom: msm8916: Add include for SMP without PSCI on ARM32
|
2021-10-23 22:35:38 -05:00 |
qcom-msm8960-cdp.dts
|
ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema
|
2022-11-09 21:34:44 -06:00 |
qcom-msm8960.dtsi
|
ARM: dts: qcom: add missing clock configuration for kpss-acc-v1
|
2023-03-15 16:41:10 -07:00 |
qcom-msm8974-lge-nexus5-hammerhead.dts
|
ARM: dts: qcom: msm8974-*: re-add remoteproc supplies
|
2022-12-27 20:57:27 -06:00 |
qcom-msm8974-sony-xperia-rhine-amami.dts
|
ARM: dts: qcom: add 'chassis-type' property
|
2022-10-17 17:22:10 -05:00 |
qcom-msm8974-sony-xperia-rhine-honami.dts
|
ARM: dts: qcom: add 'chassis-type' property
|
2022-10-17 17:22:10 -05:00 |
qcom-msm8974-sony-xperia-rhine.dtsi
|
ARM: dts: qcom: msm8974-*: re-add remoteproc supplies
|
2022-12-27 20:57:27 -06:00 |
qcom-msm8974.dtsi
|
ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
|
2023-03-15 16:44:28 -07:00 |
qcom-msm8974pro-fairphone-fp2.dts
|
ARM: dts: qcom: msm8974: clean up USB nodes
|
2022-12-05 16:35:46 -06:00 |
qcom-msm8974pro-oneplus-bacon.dts
|
ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED
|
2023-02-08 19:30:53 -08:00 |
qcom-msm8974pro-samsung-klte.dts
|
ARM: dts: qcom: msm8974: clean up USB nodes
|
2022-12-05 16:35:46 -06:00 |
qcom-msm8974pro-sony-xperia-shinano-castor.dts
|
ARM: dts: qcom: msm8974-castor: Enable charging over USB
|
2022-12-27 20:58:32 -06:00 |
qcom-msm8974pro.dtsi
|
ARM: dts: qcom: align SDHCI clocks with DT schema
|
2022-09-13 22:11:30 -05:00 |
qcom-pm8226.dtsi
|
ARM: dts: qcom: pm8226: add IADC node
|
2022-12-28 21:34:49 -06:00 |
qcom-pm8841.dtsi
|
ARM: dts: qcom: pm8841: add required thermal-sensor-cells
|
2022-06-30 22:25:04 -05:00 |
qcom-pm8941.dtsi
|
ARM: dts: qcom: pm8941: Add vibrator node
|
2023-02-08 19:30:53 -08:00 |
qcom-pma8084.dtsi
|
ARM: dts: qcom: pma8084: fix vadc channel node names
|
2022-11-07 17:21:59 -06:00 |
qcom-pmx55.dtsi
|
ARM: dts: qcom: pmx55: align SPMI PMIC Power-on node name with dtschema
|
2022-08-29 21:59:45 -05:00 |
qcom-pmx65.dtsi
|
ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio
|
2022-10-17 17:27:50 -05:00 |
qcom-sdx55-mtp.dts
|
ARM: dts: qcom-sdx55: align RPMh regulator nodes with bindings
|
2023-02-08 14:55:14 -08:00 |
qcom-sdx55-t55.dts
|
ARM: dts: qcom: sdx55-t55: Move "status" property down
|
2023-03-15 19:38:50 -07:00 |
qcom-sdx55-telit-fn980-tlb.dts
|
ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node
|
2023-04-07 16:31:44 -07:00 |
qcom-sdx55.dtsi
|
ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts
|
2023-04-07 16:30:47 -07:00 |
qcom-sdx65-mtp.dts
|
ARM: dts: qcom: sdx65: move status properties to end of nodes
|
2023-04-06 09:58:40 -07:00 |
qcom-sdx65.dtsi
|
ARM: dts: qcom: sdx65: move status properties to end of nodes
|
2023-04-06 09:58:40 -07:00 |
r7s9210-rza2mevb.dts
|
ARM: dts: rza2mevb: Fix LED node names
|
2022-06-17 09:46:20 +02:00 |
r7s9210.dtsi
|
ARM: dts: rza: Add I2C interrupt-names
|
2021-08-12 12:43:41 +02:00 |
r7s72100-genmai.dts
|
ARM: dts: renesas: Add compatible properties to uPD6061x Ethernet PHYs
|
2021-09-28 09:44:16 +02:00 |
r7s72100-gr-peach.dts
|
ARM: dts: renesas: Add compatible properties to LAN8710A Ethernet PHYs
|
2021-09-28 09:44:15 +02:00 |
r7s72100-rskrza1.dts
|
ARM: dts: renesas: Add compatible properties to uPD6061x Ethernet PHYs
|
2021-09-28 09:44:16 +02:00 |
r7s72100.dtsi
|
ARM: dts: rza: Add I2C interrupt-names
|
2021-08-12 12:43:41 +02:00 |
r8a73a4-ape6evm.dts
|
ARM: dts: r-mobile: Add missing Ethernet PHY resets
|
2021-09-28 09:45:22 +02:00 |
r8a73a4.dtsi
|
ARM: dts: r8a73a4: Remove non-functional DMA support
|
2021-07-19 10:51:34 +02:00 |
r8a77xx-aa121td01-panel.dtsi
|
|
|
r8a7740-armadillo800eva.dts
|
ARM: dts: armadillo800eva: Add I2C EEPROM for MAC address
|
2023-03-16 17:00:49 +01:00 |
r8a7740.dtsi
|
|
|
r8a7742-iwg21d-q7-dbcm-ca.dts
|
ARM: dts: renesas: Use new media bus type macros
|
2023-01-23 09:40:58 +01:00 |
r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
|
ARM: dts: renesas: Use new media bus type macros
|
2023-01-23 09:40:58 +01:00 |
r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
|
ARM: dts: renesas: Use new media bus type macros
|
2023-01-23 09:40:58 +01:00 |
r8a7742-iwg21d-q7.dts
|
ARM: dts: renesas: Align GPIO hog names with dtschema
|
2022-02-24 13:51:48 +01:00 |
r8a7742-iwg21m.dtsi
|
ARM: dts: renesas: Align GPIO hog names with dtschema
|
2022-02-24 13:51:48 +01:00 |
r8a7742.dtsi
|
ARM: dts: renesas: #sound-dai-cells is used when simple-card
|
2023-01-26 16:03:04 +01:00 |
r8a7743-iwg20d-q7-dbcm-ca.dts
|
|
|
r8a7743-iwg20d-q7.dts
|
|
|
r8a7743-iwg20m.dtsi
|
|
|
r8a7743-sk-rzg1m.dts
|
ARM: dts: rzg1: Add missing Ethernet PHY resets
|
2021-09-28 09:45:22 +02:00 |
r8a7743.dtsi
|
ARM: dts: renesas: #sound-dai-cells is used when simple-card
|
2023-01-26 16:03:04 +01:00 |
r8a7744-iwg20d-q7-dbcm-ca.dts
|
|
|
r8a7744-iwg20d-q7.dts
|
|
|
r8a7744-iwg20m.dtsi
|
|
|
r8a7744.dtsi
|
ARM: dts: renesas: #sound-dai-cells is used when simple-card
|
2023-01-26 16:03:04 +01:00 |
r8a7745-iwg22d-sodimm-dbhd-ca.dts
|
|
|
r8a7745-iwg22d-sodimm.dts
|
ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
|
2021-09-28 09:44:15 +02:00 |
r8a7745-iwg22m.dtsi
|
|
|
r8a7745-sk-rzg1e.dts
|
ARM: dts: rzg1: Add missing Ethernet PHY resets
|
2021-09-28 09:45:22 +02:00 |
r8a7745.dtsi
|
ARM: dts: renesas: #sound-dai-cells is used when simple-card
|
2023-01-26 16:03:04 +01:00 |
r8a7778-bockw.dts
|
ARM: dts: renesas: Fix SMSC Ethernet compatible values
|
2021-09-28 09:44:10 +02:00 |
r8a7778.dtsi
|
ARM: dts: renesas: #sound-dai-cells is used when simple-card
|
2023-01-26 16:03:04 +01:00 |
r8a7779-marzen.dts
|
ARM: dts: marzen: Enable I2C support
|
2023-03-30 15:56:27 +02:00 |
r8a7779.dtsi
|
ARM: dts: r8a7779: Add PWM support
|
2023-03-30 15:56:26 +02:00 |
r8a7790-lager.dts
|
ARM: dts: renesas: Fix DA9063 watchdog subnode names
|
2022-06-29 15:17:46 +02:00 |
r8a7790-stout.dts
|
ARM: dts: renesas: Fix DA9063 watchdog subnode names
|
2022-06-29 15:17:46 +02:00 |
r8a7790.dtsi
|
ARM: dts: r8a7790: Add PWM device nodes
|
2023-03-30 15:56:27 +02:00 |
r8a7791-koelsch.dts
|
ARM: dts: renesas: Fix DA9063 watchdog subnode names
|
2022-06-29 15:17:46 +02:00 |
r8a7791-porter.dts
|
ARM: dts: renesas: Fix DA9063 watchdog subnode names
|
2022-06-29 15:17:46 +02:00 |
r8a7791.dtsi
|
ARM: dts: renesas: #sound-dai-cells is used when simple-card
|
2023-01-26 16:03:04 +01:00 |
r8a7792-blanche.dts
|
ARM: dts: renesas: Fix DA9063 watchdog subnode names
|
2022-06-29 15:17:46 +02:00 |
r8a7792-wheat.dts
|
ARM: dts: renesas: Group tuples in pin control properties
|
2021-03-08 10:22:38 +01:00 |
r8a7792.dtsi
|
ARM: dts: rcar-gen2: Add interrupt properties to watchdog nodes
|
2022-04-13 13:43:03 +02:00 |
r8a7793-gose.dts
|
ARM: dts: renesas: Fix DA9063 watchdog subnode names
|
2022-06-29 15:17:46 +02:00 |
r8a7793.dtsi
|
ARM: dts: renesas: #sound-dai-cells is used when simple-card
|
2023-01-26 16:03:04 +01:00 |
r8a7794-alt.dts
|
ARM: dts: renesas: Fix DA9063 watchdog subnode names
|
2022-06-29 15:17:46 +02:00 |
r8a7794-silk.dts
|
ARM: dts: renesas: Fix DA9063 watchdog subnode names
|
2022-06-29 15:17:46 +02:00 |
r8a7794.dtsi
|
ARM: dts: renesas: #sound-dai-cells is used when simple-card
|
2023-01-26 16:03:04 +01:00 |
r8a77470-iwg23s-sbc.dts
|
ARM: dts: renesas: Align GPIO hog names with dtschema
|
2022-02-24 13:51:48 +01:00 |
r8a77470.dtsi
|
ARM: dts: renesas: Fix USB PHY device and child node names
|
2022-09-19 13:53:47 +02:00 |
r9a06g032-rzn1d400-db.dts
|
ARM: dts: r9a06g032-rzn1d400-db: Enable CAN1
|
2022-09-09 12:17:13 +02:00 |
r9a06g032.dtsi
|
ARM: dts: r9a06g032: Add the USBF controller node
|
2023-01-26 16:03:04 +01:00 |
rda8810pl-orangepi-2g-iot.dts
|
|
|
rda8810pl-orangepi-i96.dts
|
|
|
rda8810pl.dtsi
|
|
|
rk3xxx.dtsi
|
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
|
2022-11-15 12:02:38 +01:00 |
rk322x.dtsi
|
ARM: dts: rockchip: add clocks property to cru node rk3228
|
2022-05-27 19:27:00 +02:00 |
rk3036-evb.dts
|
arm: dts: rockchip: remove clock-frequency from rtc
|
2022-10-30 21:05:43 +01:00 |
rk3036-kylin.dts
|
ARM: dts: rockchip: restyle emac nodes
|
2022-09-10 00:58:36 +02:00 |
rk3036.dtsi
|
ARM: dts: rockchip: restyle emac nodes
|
2022-09-10 00:58:36 +02:00 |
rk3066a-bqcurie2.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3066a-marsboard.dts
|
ARM: dts: rockchip: restyle emac nodes
|
2022-09-10 00:58:36 +02:00 |
rk3066a-mk808.dts
|
ARM: dts: rockchip: add brcmf node to rk3066a-mk808
|
2023-01-10 16:30:52 +01:00 |
rk3066a-rayeager.dts
|
ARM: dts: rockchip: restyle emac nodes
|
2022-09-10 00:58:36 +02:00 |
rk3066a.dtsi
|
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
|
2022-05-27 19:27:00 +02:00 |
rk3128-evb.dts
|
ARM: dts: rockchip: add rk3128-evb
|
2022-12-26 23:38:10 +01:00 |
rk3128.dtsi
|
ARM: dts: rockchip: add space between label and nodename nfc pinctrl on rk3128
|
2023-01-10 16:29:11 +01:00 |
rk3188-bqedison2qc.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3188-px3-evb.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3188-radxarock.dts
|
ARM: dts: rockchip: fix ir-receiver node names
|
2022-10-30 21:19:36 +01:00 |
rk3188.dtsi
|
Disabling of the unreliable arm-global-timer on earliest
|
2022-11-24 15:36:13 +01:00 |
rk3228-evb.dts
|
ARM: dts: rockchip: move rk322x mmcx aliases to board dts files
|
2021-04-11 11:11:42 +02:00 |
rk3229-evb.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3229-xms6.dts
|
ARM: dts: rockchip: move rk322x mmcx aliases to board dts files
|
2021-04-11 11:11:42 +02:00 |
rk3229.dtsi
|
ARM: dts: rockchip: rename opp-table node names
|
2021-09-20 15:22:37 +02:00 |
rk3288-evb-act8846.dts
|
arm: dts: rockchip: fix node name for hym8563 rtc
|
2022-10-30 21:05:42 +01:00 |
rk3288-evb-rk808.dts
|
|
|
rk3288-evb.dtsi
|
ARM: dts: rockchip: fix adc-keys sub node names
|
2022-10-30 21:19:31 +01:00 |
rk3288-firefly-beta.dts
|
|
|
rk3288-firefly-reload-core.dtsi
|
|
|
rk3288-firefly-reload.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3288-firefly.dts
|
|
|
rk3288-firefly.dtsi
|
arm: dts: rockchip: remove clock-frequency from rtc
|
2022-10-30 21:05:43 +01:00 |
rk3288-miqi.dts
|
arm: dts: rockchip: remove clock-frequency from rtc
|
2022-10-30 21:05:43 +01:00 |
rk3288-phycore-rdk.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3288-phycore-som.dtsi
|
|
|
rk3288-popmetal.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3288-r89.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3288-rock-pi-n8.dts
|
|
|
rk3288-rock2-som.dtsi
|
ARM: dts: rockchip: fix supply properties in io-domains nodes
|
2021-06-10 09:48:49 +02:00 |
rk3288-rock2-square.dts
|
arm: dts: rockchip: remove clock-frequency from rtc
|
2022-10-30 21:05:43 +01:00 |
rk3288-tinker-s.dts
|
|
|
rk3288-tinker.dts
|
|
|
rk3288-tinker.dtsi
|
ARM: dts: rockchip: correct gpio-keys properties on rk3288-tinker
|
2022-06-22 21:04:38 +02:00 |
rk3288-veyron-analog-audio.dtsi
|
|
|
rk3288-veyron-brain.dts
|
|
|
rk3288-veyron-broadcom-bluetooth.dtsi
|
ARM: dts: rockchip: adjust whitespace around '='
|
2022-06-10 18:43:48 +02:00 |
rk3288-veyron-chromebook.dtsi
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3288-veyron-edp.dtsi
|
|
|
rk3288-veyron-fievel.dts
|
|
|
rk3288-veyron-jaq.dts
|
|
|
rk3288-veyron-jerry.dts
|
|
|
rk3288-veyron-mickey.dts
|
|
|
rk3288-veyron-mighty.dts
|
|
|
rk3288-veyron-minnie.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3288-veyron-pinky.dts
|
ARM: dts: rockchip: align gpio-key node names with dtschema
|
2022-06-22 21:04:38 +02:00 |
rk3288-veyron-sdmmc.dtsi
|
ARM: dts: rockchip: Add mmc aliases for rk3288-veyron devices
|
2023-03-15 08:44:57 +01:00 |
rk3288-veyron-speedy.dts
|
|
|
rk3288-veyron-tiger.dts
|
|
|
rk3288-veyron.dtsi
|
ARM: dts: rockchip: Add mmc aliases for rk3288-veyron devices
|
2023-03-15 08:44:57 +01:00 |
rk3288-vmarc-som.dtsi
|
arm: dts: rockchip: remove clock-frequency from rtc
|
2022-10-30 21:05:43 +01:00 |
rk3288-vyasa.dts
|
ARM: dts: rockchip: fix supply properties in io-domains nodes
|
2021-06-10 09:48:49 +02:00 |
rk3288.dtsi
|
ARM: SoC devicetree changes for 6.4
|
2023-04-25 12:11:54 -07:00 |
rockchip-radxa-dalang-carrier.dtsi
|
|
|
rtd1195-horseradish.dts
|
|
|
rtd1195-mele-x1000.dts
|
|
|
rtd1195.dtsi
|
|
|
rv1108-elgin-r1.dts
|
ARM: dts: rockchip: adjust whitespace around '='
|
2022-06-10 18:43:48 +02:00 |
rv1108-evb.dts
|
ARM: dts: rockchip: adjust whitespace around '='
|
2022-06-10 18:43:48 +02:00 |
rv1108.dtsi
|
ARM: dts: rockchip: adjust whitespace around '='
|
2022-06-10 18:43:48 +02:00 |
rv1126-edgeble-neu2-io.dts
|
ARM: dts: rockchip: Enable Ethernet on rv1126 Neu2-IO
|
2023-01-15 15:28:59 +01:00 |
rv1126-edgeble-neu2.dtsi
|
ARM: dts: rockchip: Add Edgeble RV1126 Neural Compute Module 2(Neu2)
|
2022-12-26 23:38:09 +01:00 |
rv1126-pinctrl.dtsi
|
ARM: dts: rockchip: Add ethernet rgmiim1 pin-control for rv1126
|
2023-01-15 15:28:59 +01:00 |
rv1126.dtsi
|
ARM: dts: rockchip: Add Ethernet GMAC node for RV1126
|
2023-01-15 15:28:59 +01:00 |
s3c64xx-pinctrl.dtsi
|
ARM: dts: s3c64xx: use local header for pinctrl register values
|
2022-06-07 08:41:06 +02:00 |
s3c64xx-pinctrl.h
|
ARM: dts: s3c64xx: use local header for pinctrl register values
|
2022-06-07 08:41:06 +02:00 |
s3c64xx.dtsi
|
ARM: dts: s3c64xx: align SDHCI node name with dtschema
|
2022-06-27 10:55:45 +02:00 |
s3c6400.dtsi
|
|
|
s3c6410-mini6410.dts
|
ARM: dts: s3c64xx: align pinctrl with dtschema
|
2022-01-23 17:54:57 +01:00 |
s3c6410-smdk6410.dts
|
|
|
s3c6410.dtsi
|
|
|
s5pv210-aquila.dts
|
ARM: dts: s5pv210: use local header for pinctrl register values
|
2022-06-07 08:41:09 +02:00 |
s5pv210-aries.dtsi
|
ARM: dts: s5pv210: add "gpios" suffix to wlf,ldo1ena on Aries
|
2023-02-09 12:05:16 +01:00 |
s5pv210-fascinate4g.dts
|
ARM: dts: s5pv210: align gpio-key node names with dtschema
|
2022-06-15 17:47:29 -07:00 |
s5pv210-galaxys.dts
|
ARM: dts: s5pv210: correct double "pins" in pinmux node
|
2022-09-30 17:14:24 +02:00 |
s5pv210-goni.dts
|
ARM: dts: s5pv210: Adjust memory reg entries to match spec
|
2022-04-09 18:50:05 +02:00 |
s5pv210-pinctrl.dtsi
|
ARM: dts: s5pv210: use local header for pinctrl register values
|
2022-06-07 08:41:09 +02:00 |
s5pv210-pinctrl.h
|
ARM: dts: s5pv210: use local header for pinctrl register values
|
2022-06-07 08:41:09 +02:00 |
s5pv210-smdkc110.dts
|
|
|
s5pv210-smdkv210.dts
|
|
|
s5pv210-torbreck.dts
|
|
|
s5pv210.dtsi
|
ARM: dts: s5pv210: correct MIPI CSIS clock name
|
2023-03-06 10:31:32 +01:00 |
sam9x60.dtsi
|
SoC: DT changes for 6.3
|
2023-02-20 15:49:56 -08:00 |
sama5d2-pinfunc.h
|
|
|
sama5d2.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
sama5d3.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
sama5d3_can.dtsi
|
|
|
sama5d3_emac.dtsi
|
|
|
sama5d3_gmac.dtsi
|
|
|
sama5d3_lcd.dtsi
|
|
|
sama5d3_mci2.dtsi
|
|
|
sama5d3_tcb1.dtsi
|
|
|
sama5d3_uart.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
sama5d3xcm.dtsi
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
sama5d3xcm_cmp.dtsi
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
sama5d3xdm.dtsi
|
|
|
sama5d3xmb.dtsi
|
ARM: dts: at91: align SPI NOR node name with dtschema
|
2022-04-13 18:42:50 +02:00 |
sama5d3xmb_cmp.dtsi
|
ARM: dts: at91: align SPI NOR node name with dtschema
|
2022-04-13 18:42:50 +02:00 |
sama5d3xmb_emac.dtsi
|
|
|
sama5d3xmb_gmac.dtsi
|
|
|
sama5d4.dtsi
|
ARM: dts: at91: Add atmel,usart-mode required property to serial nodes
|
2022-09-16 10:41:36 +03:00 |
sama5d29.dtsi
|
ARM: at91: dts: sama5d29: Add dtsi file for sama5d29
|
2021-09-21 12:37:07 +02:00 |
sama5d31.dtsi
|
|
|
sama5d31ek.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
sama5d33.dtsi
|
|
|
sama5d33ek.dts
|
|
|
sama5d34.dtsi
|
|
|
sama5d34ek.dts
|
ARM: dts: at91: align LED node names with dtschema
|
2023-01-13 11:38:33 +01:00 |
sama5d35.dtsi
|
|
|
sama5d35ek.dts
|
|
|
sama5d36.dtsi
|
|
|
sama5d36ek.dts
|
|
|
sama5d36ek_cmp.dts
|
|
|
sama7g5-pinfunc.h
|
SoC: DT changes for 6.2
|
2022-12-12 10:21:03 -08:00 |
sama7g5.dtsi
|
ARM: dts: at91: sama7g5: add nodes for video capture
|
2023-01-09 14:02:08 +02:00 |
sd5203.dts
|
ARM: dts: sd: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
sh73a0-kzm9g.dts
|
ARM: dts: renesas: Fix SMSC Ethernet compatible values
|
2021-09-28 09:44:10 +02:00 |
sh73a0.dtsi
|
|
|
socfpga.dtsi
|
SoCFPGA dts updates for v6.3
|
2023-02-06 20:48:41 +01:00 |
socfpga_arria5.dtsi
|
arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
|
2022-11-18 11:13:49 -06:00 |
socfpga_arria5_socdk.dts
|
ARM: dts: socfpga: align LED node names with dtschema
|
2022-11-29 10:21:13 -06:00 |
socfpga_arria10.dtsi
|
ARM: dts: socfpga: align UART node name with bindings
|
2023-01-23 13:22:19 -06:00 |
socfpga_arria10_chameleonv3.dts
|
ARM: dts: socfpga: Add Google Chameleon v3 devicetree
|
2022-06-14 10:45:33 -05:00 |
socfpga_arria10_mercury_aa1.dtsi
|
arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
|
2022-11-18 11:13:49 -06:00 |
socfpga_arria10_mercury_pe1.dts
|
ARM: dts: socfpga: Add enclustra PE1 devicetree
|
2023-02-16 09:18:06 -06:00 |
socfpga_arria10_socdk.dtsi
|
ARM: dts: arria10: add board compatible for SoCFPGA DK
|
2022-02-09 10:43:03 -06:00 |
socfpga_arria10_socdk_nand.dts
|
ARM: dts: socfpga: arria10: Increase NAND boot partition size
|
2022-10-24 11:48:28 -05:00 |
socfpga_arria10_socdk_qspi.dts
|
ARM: dts: socfpga: align SPI NOR node name with dtschema
|
2022-05-12 09:23:30 -05:00 |
socfpga_arria10_socdk_sdmmc.dts
|
arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
|
2022-11-18 11:13:49 -06:00 |
socfpga_cyclone5.dtsi
|
arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
|
2022-11-18 11:13:49 -06:00 |
socfpga_cyclone5_chameleon96.dts
|
ARM: dts: socfpga: cyclone5: align regulator node with dtschema
|
2022-02-09 20:58:10 -06:00 |
socfpga_cyclone5_de0_nano_soc.dts
|
ARM: dts: socfpga: align LED node names with dtschema
|
2022-11-29 10:21:13 -06:00 |
socfpga_cyclone5_mcv.dtsi
|
arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
|
2022-11-18 11:13:49 -06:00 |
socfpga_cyclone5_mcvevk.dts
|
|
|
socfpga_cyclone5_socdk.dts
|
ARM: dts: socfpga: align LED node names with dtschema
|
2022-11-29 10:21:13 -06:00 |
socfpga_cyclone5_sockit.dts
|
ARM: dts: socfpga: cyclone5: align regulator node with dtschema
|
2022-02-09 20:58:10 -06:00 |
socfpga_cyclone5_socrates.dts
|
ARM: socfpga: dts: fix qspi node compatible
|
2021-12-03 11:44:36 -06:00 |
socfpga_cyclone5_sodia.dts
|
ARM: dts: socfpga: align SPI NOR node name with dtschema
|
2022-05-12 09:23:30 -05:00 |
socfpga_cyclone5_vining_fpga.dts
|
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
|
2022-12-06 14:55:51 -06:00 |
socfpga_vt.dts
|
ARM: dts: socfpga: align UART node name with bindings
|
2023-01-23 13:22:19 -06:00 |
spear3xx.dtsi
|
ARM: dts: spear3xx: Fix gmac node
|
2021-10-08 16:22:39 +01:00 |
spear13xx.dtsi
|
ARM: dts: spear13xx: Update SPI dma properties
|
2022-04-01 00:01:23 +02:00 |
spear300-evb.dts
|
ARM: dts: spear: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
spear300.dtsi
|
ARM: dts: spear: drop 0x from unit address
|
2022-12-19 16:45:45 +01:00 |
spear310-evb.dts
|
ARM: dts: spear: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
spear310.dtsi
|
ARM: dts: spear: drop 0x from unit address
|
2022-12-19 16:45:45 +01:00 |
spear320-evb.dts
|
ARM: dts: spear: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
spear320-hmi.dts
|
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
|
2023-02-27 14:46:30 +01:00 |
spear320.dtsi
|
ARM: dts: spear: drop 0x from unit address
|
2022-12-19 16:45:45 +01:00 |
spear320s.dtsi
|
ARM: dts: spear3xx: Add spear320s dtsi
|
2021-12-13 17:13:54 +01:00 |
spear600-evb.dts
|
|
|
spear600.dtsi
|
arm: dts: spear600: Add ssp controller nodes
|
2022-11-14 16:10:12 +01:00 |
spear1310-evb.dts
|
ARM: dts: spear: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
spear1310.dtsi
|
ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes
|
2021-10-22 17:26:39 +02:00 |
spear1340-evb.dts
|
ARM: dts: spear: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
spear1340.dtsi
|
ARM: dts: spear: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
st-pincfg.h
|
|
|
ste-ab8500.dtsi
|
ARM: dts: ste: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
ste-ab8505.dtsi
|
ARM: dts: ux500: Update AB850[05] nodes
|
2022-02-11 22:49:22 +01:00 |
ste-db8500.dtsi
|
arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
|
2021-08-26 13:46:29 +02:00 |
ste-db8520.dtsi
|
arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
|
2021-08-26 13:46:29 +02:00 |
ste-db9500.dtsi
|
ARM: dts: ux500: Adjust operating points to reality
|
2021-08-02 01:41:59 +02:00 |
ste-dbx5x0-pinctrl.dtsi
|
ARM: dts: ux500: Add device tree for Samsung Gavini
|
2021-07-30 11:17:59 +02:00 |
ste-dbx5x0.dtsi
|
ARM: dts: ux500: Add clkout-clock node
|
2023-01-25 23:15:27 +01:00 |
ste-href-ab8500.dtsi
|
ARM: dts: ux500: Update AB850[05] nodes
|
2022-02-11 22:49:22 +01:00 |
ste-href-family-pinctrl.dtsi
|
|
|
ste-href-stuib.dtsi
|
|
|
ste-href-tvk1281618-r2.dtsi
|
ARM: dts: href: Mount matrices for TVK R2
|
2021-05-18 16:18:20 +02:00 |
ste-href-tvk1281618-r3.dtsi
|
ARM: dts: ux500: Drop drdy pin assignment from magnetometer
|
2021-05-18 02:17:35 +02:00 |
ste-href.dtsi
|
ARM: dts: ste: align LED node names with dtschema
|
2023-01-25 23:15:27 +01:00 |
ste-href520-tvk.dts
|
ARM: dts: ux500: Clarify UIB version per board
|
2021-03-27 00:37:28 +01:00 |
ste-hrefprev60-stuib.dts
|
ARM: dts: ux500: Push VMMCI down to each tree
|
2021-01-13 13:12:20 +01:00 |
ste-hrefprev60-tvk.dts
|
ARM: dts: ux500: Clarify UIB version per board
|
2021-03-27 00:37:28 +01:00 |
ste-hrefprev60.dtsi
|
ARM: dts: Fix up MMC host node names
|
2021-01-22 21:45:43 +01:00 |
ste-hrefv60plus-stuib.dts
|
ARM: dts: ux500: Push VMMCI down to each tree
|
2021-01-13 13:12:20 +01:00 |
ste-hrefv60plus-tvk.dts
|
ARM: dts: ux500: Clarify UIB version per board
|
2021-03-27 00:37:28 +01:00 |
ste-hrefv60plus.dtsi
|
ARM: dts: ste: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
ste-nomadik-nhk15.dts
|
ARM: dts: nomadik: Replace deprecated spi-gpio properties
|
2023-04-14 17:57:34 +02:00 |
ste-nomadik-pinctrl.dtsi
|
|
|
ste-nomadik-s8815.dts
|
ARM: dts: nomadik: Fix up MMC node names
|
2021-01-22 23:38:33 +01:00 |
ste-nomadik-stn8815.dtsi
|
ARM: dts: nomadik: Fix up interrupt controller node names
|
2021-08-02 14:23:02 +02:00 |
ste-snowball.dts
|
ARM: dts: ux500: Add trips to battery thermal zones
|
2022-11-01 12:21:17 +01:00 |
ste-ux500-samsung-codina-tmo.dts
|
SoC: DT changes for 6.2
|
2022-12-12 10:21:03 -08:00 |
ste-ux500-samsung-codina.dts
|
SoC: DT changes for 6.2
|
2022-12-12 10:21:03 -08:00 |
ste-ux500-samsung-gavini.dts
|
SoC: DT changes for 6.2
|
2022-12-12 10:21:03 -08:00 |
ste-ux500-samsung-golden.dts
|
ARM: dts: ux500: Add trips to battery thermal zones
|
2022-11-01 12:21:17 +01:00 |
ste-ux500-samsung-janice.dts
|
SoC: DT changes for 6.2
|
2022-12-12 10:21:03 -08:00 |
ste-ux500-samsung-kyle.dts
|
SoC: DT changes for 6.2
|
2022-12-12 10:21:03 -08:00 |
ste-ux500-samsung-skomer.dts
|
ARM: dts: ux500: Add trips to battery thermal zones
|
2022-11-01 12:21:17 +01:00 |
stih407-b2120.dts
|
ARM: dts: sti: remove clk_ignore_unused from bootargs for stih407-b2120
|
2021-08-06 09:30:02 +02:00 |
stih407-clock.dtsi
|
ARM: dts: sti: ensure unique unit-address in stih407-clock
|
2022-02-15 18:06:19 +01:00 |
stih407-family.dtsi
|
ARM: dts: stih407-family: Harmonize DWC USB3 DT nodes name
|
2022-06-27 10:19:49 +02:00 |
stih407-pinctrl.dtsi
|
|
|
stih407.dtsi
|
ARM: dts: sti: adjust whitespace around '='
|
2022-06-16 13:44:58 -07:00 |
stih410-b2120.dts
|
ARM: dts: sti: move usb picophy nodes out of soc in stih410.dtsi
|
2022-02-15 18:08:28 +01:00 |
stih410-b2260.dts
|
ARM: dts: sti: align LED node names with dtschema
|
2022-12-01 18:04:47 +01:00 |
stih410-clock.dtsi
|
ARM: dts: sti: ensure unique unit-address in stih410-clock
|
2022-02-15 18:06:53 +01:00 |
stih410-pinctrl.dtsi
|
|
|
stih410.dtsi
|
ARM: dts: stih410: align HDMI CEC node names with dtschema
|
2023-01-13 11:37:21 +01:00 |
stih418-b2199.dts
|
ARM: dts: sti: align LED node names with dtschema
|
2022-12-01 18:04:47 +01:00 |
stih418-b2264.dts
|
ARM: dts: stih418: align OPP table names with DT schema
|
2023-01-26 11:23:07 +01:00 |
stih418-clock.dtsi
|
ARM: dts: sti: ensure unique unit-address in stih418-clock
|
2022-02-15 18:07:16 +01:00 |
stih418.dtsi
|
ARM: dts: sti: move usb picophy nodes out of soc in stih418.dtsi
|
2022-02-15 18:08:55 +01:00 |
stihxxx-b2120.dtsi
|
ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
|
2023-02-03 14:41:50 +01:00 |
stm32f4-pinctrl.dtsi
|
ARM: dts: stm32: add pin map for CAN controller on stm32f4
|
2023-03-28 11:43:36 +02:00 |
stm32f7-pinctrl.dtsi
|
ARM: dts: stm32: add pin map for CAN controller on stm32f7
|
2023-05-15 22:26:17 +02:00 |
stm32f429-disco.dts
|
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f4 series
|
2022-02-07 09:52:57 +01:00 |
stm32f429-pinctrl.dtsi
|
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
|
2021-06-10 14:11:24 +02:00 |
stm32f429.dtsi
|
ARM: dts: stm32f429: put can2 in secondary mode
|
2023-05-15 22:26:17 +02:00 |
stm32f469-disco.dts
|
ARM: dts: stm32: Enable DMA2D on STM32F469-DISCO board
|
2022-02-07 11:46:13 +01:00 |
stm32f469-pinctrl.dtsi
|
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
|
2021-06-10 14:11:24 +02:00 |
stm32f469.dtsi
|
|
|
stm32f746-disco.dts
|
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series
|
2022-02-25 10:53:15 +01:00 |
stm32f746-pinctrl.dtsi
|
|
|
stm32f746.dtsi
|
Revert "ARM: dts: stm32: add CAN support on stm32f746"
|
2023-05-17 20:20:12 +02:00 |
stm32f769-disco.dts
|
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series
|
2022-02-25 10:53:15 +01:00 |
stm32f769-pinctrl.dtsi
|
|
|
stm32h7-pinctrl.dtsi
|
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
|
2021-04-01 09:51:41 +02:00 |
stm32h743.dtsi
|
ARM: dts: stm32: Remove the pins-are-numbered property
|
2023-01-17 14:52:08 +01:00 |
stm32h743i-disco.dts
|
ARM: dts: stm32: adjust whitespace around '=' on MCU boards
|
2022-07-05 09:26:36 +02:00 |
stm32h743i-eval.dts
|
ARM: dts: stm32: adjust whitespace around '=' on MCU boards
|
2022-07-05 09:26:36 +02:00 |
stm32h750.dtsi
|
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
|
2021-04-01 09:51:41 +02:00 |
stm32h750i-art-pi.dts
|
ARM: dts: stm32: adjust whitespace around '=' on MCU boards
|
2022-07-05 09:26:36 +02:00 |
stm32mp13-pinctrl.dtsi
|
ARM: dts: stm32: add pins for usart2/1/4/8 in stm32mp13-pinctrl
|
2023-03-28 17:50:24 +02:00 |
stm32mp13xc.dtsi
|
ARM: dts: stm32: add RCC on STM32MP13x SoC family
|
2022-07-05 09:26:36 +02:00 |
stm32mp13xf.dtsi
|
ARM: dts: stm32: add RCC on STM32MP13x SoC family
|
2022-07-05 09:26:36 +02:00 |
stm32mp15-pinctrl.dtsi
|
ARM: dts: stm32: fix slew-rate of USART2 on stm32mp15xx-dkx
|
2023-03-28 17:50:23 +02:00 |
stm32mp15-scmi.dtsi
|
ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
|
2022-07-04 09:10:24 +02:00 |
stm32mp15xc.dtsi
|
|
|
stm32mp15xx-dhcom-drc02.dtsi
|
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-drc02
|
2022-02-25 10:53:15 +01:00 |
stm32mp15xx-dhcom-pdk2.dtsi
|
ARM: dts: stm32: Replace SAI format with dai-format DT property
|
2022-10-21 11:17:25 +02:00 |
stm32mp15xx-dhcom-picoitx.dtsi
|
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-picoitx
|
2022-02-25 10:53:15 +01:00 |
stm32mp15xx-dhcom-som.dtsi
|
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
|
2023-01-17 14:48:44 +01:00 |
stm32mp15xx-dhcor-avenger96.dtsi
|
ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
|
2022-10-24 11:18:09 +02:00 |
stm32mp15xx-dhcor-drc-compact.dtsi
|
ARM: dts: stm32: Rename mdio0 to mdio
|
2022-10-21 11:17:25 +02:00 |
stm32mp15xx-dhcor-io1v8.dtsi
|
ARM: dts: stm32: Move DHCOR BUCK3 VDD 2V9 adjustment to 1V8 DTSI
|
2022-07-05 09:26:36 +02:00 |
stm32mp15xx-dhcor-som.dtsi
|
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
|
2023-01-17 14:48:44 +01:00 |
stm32mp15xx-dhcor-testbench.dtsi
|
ARM: dts: stm32: Rename mdio0 to mdio on DHCOR Testbench board
|
2022-11-17 11:16:05 +01:00 |
stm32mp15xx-dkx.dtsi
|
ARM: dts: stm32: YAML validation fails for STM32MP15 ST Boards
|
2023-04-03 09:55:01 +02:00 |
stm32mp15xx-osd32.dtsi
|
ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15xx-osd32 SoM
|
2023-03-20 17:11:58 +01:00 |
stm32mp15xxaa-pinctrl.dtsi
|
|
|
stm32mp15xxab-pinctrl.dtsi
|
|
|
stm32mp15xxac-pinctrl.dtsi
|
|
|
stm32mp15xxad-pinctrl.dtsi
|
|
|
stm32mp131.dtsi
|
ARM: dts: stm32: Add QSPI support on STM32MP13x SoC family
|
2023-04-03 11:19:03 +02:00 |
stm32mp133.dtsi
|
ARM: dts: stm32: add adc support to stm32mp13
|
2022-10-24 11:11:38 +02:00 |
stm32mp135.dtsi
|
ARM: dts: stm32: add STM32MP13 SoCs support
|
2021-10-15 16:51:09 +02:00 |
stm32mp135f-dk.dts
|
ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk
|
2023-03-28 17:50:24 +02:00 |
stm32mp151.dtsi
|
ARM: dts: stm32: add USB OTG UTMI clock on stm32mp151
|
2023-04-20 10:17:06 +02:00 |
stm32mp151a-dhcor-testbench.dts
|
ARM: dts: stm32: Add DHCOR based Testbench board
|
2022-10-21 11:17:25 +02:00 |
stm32mp151a-prtt1a.dts
|
ARM: dts: stm32: add support for Protonic PRTT1x boards
|
2022-05-02 10:36:10 +02:00 |
stm32mp151a-prtt1c.dts
|
ARM: dts: stm32: add support for Protonic PRTT1x boards
|
2022-05-02 10:36:10 +02:00 |
stm32mp151a-prtt1l.dtsi
|
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
|
2023-01-17 14:48:44 +01:00 |
stm32mp151a-prtt1s.dts
|
ARM: dts: stm32: add support for Protonic PRTT1x boards
|
2022-05-02 10:36:10 +02:00 |
stm32mp153.dtsi
|
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15
|
2022-02-25 10:53:15 +01:00 |
stm32mp153c-dhcom-drc02.dts
|
ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM
|
2021-04-01 11:30:01 +02:00 |
stm32mp153c-dhcor-drc-compact.dts
|
ARM: dts: stm32: Add DHCOR based DRC Compact board
|
2022-07-05 11:42:11 +02:00 |
stm32mp157.dtsi
|
|
|
stm32mp157a-avenger96.dts
|
|
|
stm32mp157a-dhcor-avenger96.dts
|
ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96
|
2022-10-21 11:17:26 +02:00 |
stm32mp157a-dk1-scmi.dts
|
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
|
2022-07-04 09:10:24 +02:00 |
stm32mp157a-dk1.dts
|
ARM: dts: stm32: clean uart aliases on stm32mp15xx-dkx boards
|
2023-03-28 17:50:23 +02:00 |
stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
|
ARM: dts: stm32: Fix typo in license text for Engicam boards
|
2022-09-12 15:19:12 +02:00 |
stm32mp157a-icore-stm32mp1-ctouch2.dts
|
ARM: dts: stm32: Fix typo in license text for Engicam boards
|
2022-09-12 15:19:12 +02:00 |
stm32mp157a-icore-stm32mp1-edimm2.2.dts
|
ARM: dts: stm32: Fix typo in license text for Engicam boards
|
2022-09-12 15:19:12 +02:00 |
stm32mp157a-icore-stm32mp1.dtsi
|
ARM: dts: stm32: Fix typo in license text for Engicam boards
|
2022-09-12 15:19:12 +02:00 |
stm32mp157a-iot-box.dts
|
ARM: dts: stm32: keep uart4 behavior on stm32mp157a-iot-box
|
2022-02-25 10:53:15 +01:00 |
stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
|
ARM: dts: stm32: Fix typo in license text for Engicam boards
|
2022-09-12 15:19:12 +02:00 |
stm32mp157a-microgea-stm32mp1-microdev2.0.dts
|
ARM: dts: stm32: Fix typo in license text for Engicam boards
|
2022-09-12 15:19:12 +02:00 |
stm32mp157a-microgea-stm32mp1.dtsi
|
ARM: dts: stm32: Fix typo in license text for Engicam boards
|
2022-09-12 15:19:12 +02:00 |
stm32mp157a-stinger96.dts
|
|
|
stm32mp157a-stinger96.dtsi
|
ARM: dts: stm32: keep uart nodes behavior on stm32mp157a-stinger96
|
2022-02-25 10:53:15 +01:00 |
stm32mp157c-dhcom-pdk2.dts
|
ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM
|
2021-04-01 11:30:01 +02:00 |
stm32mp157c-dhcom-picoitx.dts
|
ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM
|
2021-04-01 11:30:01 +02:00 |
stm32mp157c-dk2-scmi.dts
|
ARM: dts: stm32: fix pwr regulators references to use scmi
|
2022-07-04 09:10:24 +02:00 |
stm32mp157c-dk2.dts
|
ARM: dts: stm32: clean uart aliases on stm32mp15xx-dkx boards
|
2023-03-28 17:50:23 +02:00 |
stm32mp157c-ed1-scmi.dts
|
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
|
2022-07-04 09:10:24 +02:00 |
stm32mp157c-ed1.dts
|
ARM: dts: stm32: YAML validation fails for STM32MP15 ST Boards
|
2023-04-03 09:55:01 +02:00 |
stm32mp157c-emsbc-argon.dts
|
ARM: dts: stm32: Add support for the emtrion emSBC-Argon
|
2022-02-07 10:31:19 +01:00 |
stm32mp157c-emstamp-argon.dtsi
|
ARM: dts: stm32: YAML validation fails for Argon Boards
|
2023-04-03 10:01:11 +02:00 |
stm32mp157c-ev1-scmi.dts
|
ARM: dts: stm32: fix pwr regulators references to use scmi
|
2022-07-04 09:10:24 +02:00 |
stm32mp157c-ev1.dts
|
ARM: dts: stm32: clean uart aliases on stm32mp15xx-exx boards
|
2023-03-28 17:50:23 +02:00 |
stm32mp157c-lxa-mc1.dts
|
ARM: dts: stm32: drop invalid simple-panel compatible on stm32mp157c-lxa
|
2023-03-28 10:37:47 +02:00 |
stm32mp157c-odyssey-som.dtsi
|
ARM: dts: stm32: YAML validation fails for Odyssey Boards
|
2023-04-03 09:58:43 +02:00 |
stm32mp157c-odyssey.dts
|
ARM: dts: stm32: Rename mdio0 to mdio
|
2022-10-21 11:17:25 +02:00 |
stm32429i-eval.dts
|
ARM: dts: stm32: Use new media bus type macros
|
2023-01-17 14:52:51 +01:00 |
stm32746g-eval.dts
|
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series
|
2022-02-25 10:53:15 +01:00 |
sun4i-a10-a1000.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun4i-a10-ba10-tvbox.dts
|
|
|
sun4i-a10-chuwi-v7-cw0825.dts
|
|
|
sun4i-a10-cubieboard.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun4i-a10-dserve-dsrv9703c.dts
|
ARM: dts: sunxi: Add missing backlight supply
|
2021-01-18 10:13:16 +01:00 |
sun4i-a10-gemei-g9.dts
|
|
|
sun4i-a10-hackberry.dts
|
|
|
sun4i-a10-hyundai-a7hd.dts
|
|
|
sun4i-a10-inet1.dts
|
ARM: dts: sunxi: Add missing backlight supply
|
2021-01-18 10:13:16 +01:00 |
sun4i-a10-inet9f-rev03.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun4i-a10-inet97fv2.dts
|
|
|
sun4i-a10-itead-iteaduino-plus.dts
|
|
|
sun4i-a10-jesurun-q5.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun4i-a10-marsboard.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun4i-a10-mini-xplus.dts
|
|
|
sun4i-a10-mk802.dts
|
|
|
sun4i-a10-mk802ii.dts
|
|
|
sun4i-a10-olinuxino-lime.dts
|
ARM: dts: sunxi: Fix OPP arrays
|
2021-09-13 09:04:30 +02:00 |
sun4i-a10-pcduino.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun4i-a10-pcduino2.dts
|
|
|
sun4i-a10-pov-protab2-ips9.dts
|
ARM: dts: sunxi: Add missing backlight supply
|
2021-01-18 10:13:16 +01:00 |
sun4i-a10-topwise-a721.dts
|
ARM: dts: sun4i: Add support for Topwise A721 tablet
|
2021-03-06 15:40:28 +08:00 |
sun4i-a10.dtsi
|
ARM: dts: sunxi: Fix OPP arrays
|
2021-09-13 09:04:30 +02:00 |
sun5i-a10s-auxtek-t003.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun5i-a10s-auxtek-t004.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun5i-a10s-mk802.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun5i-a10s-olinuxino-micro.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun5i-a10s-r7-tv-dongle.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun5i-a10s-wobo-i5.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun5i-a10s.dtsi
|
|
|
sun5i-a13-difrnce-dit4350.dts
|
|
|
sun5i-a13-empire-electronix-d709.dts
|
ARM: dts: sunxi: Add missing backlight supply
|
2021-01-18 10:13:16 +01:00 |
sun5i-a13-empire-electronix-m712.dts
|
|
|
sun5i-a13-hsg-h702.dts
|
|
|
sun5i-a13-inet-98v-rev2.dts
|
|
|
sun5i-a13-licheepi-one.dts
|
ARM: dts: sun5i: adjust whitespace around '='
|
2022-06-06 23:16:58 +02:00 |
sun5i-a13-olinuxino-micro.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun5i-a13-olinuxino.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun5i-a13-pocketbook-touch-lux-3.dts
|
ARM: dts: sunxi: Add missing backlight supply
|
2021-01-18 10:13:16 +01:00 |
sun5i-a13-q8-tablet.dts
|
|
|
sun5i-a13-utoo-p66.dts
|
|
|
sun5i-a13.dtsi
|
ARM: dts: sunxi: Fix OPP arrays
|
2021-09-13 09:04:30 +02:00 |
sun5i-gr8-chip-pro.dts
|
ARM: dts: sunxi: Fix GPIO LED node names
|
2023-01-27 22:34:32 +01:00 |
sun5i-gr8-evb.dts
|
ARM: dts: sunxi: Add missing backlight supply
|
2021-01-18 10:13:16 +01:00 |
sun5i-gr8.dtsi
|
|
|
sun5i-r8-chip.dts
|
ARM: dts: sunxi: Fix GPIO LED node names
|
2023-01-27 22:34:32 +01:00 |
sun5i-r8.dtsi
|
|
|
sun5i-reference-design-tablet.dtsi
|
ARM: dts: sunxi: Add missing backlight supply
|
2021-01-18 10:13:16 +01:00 |
sun5i.dtsi
|
ARM: dts: sun5i: add A10s/A13 mali gpu support fallback
|
2021-01-13 09:18:56 +01:00 |
sun6i-a31-app4-evb1.dts
|
|
|
sun6i-a31-colombus.dts
|
|
|
sun6i-a31-hummingbird.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun6i-a31-i7.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun6i-a31-m9.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun6i-a31-mele-a1000g-quad.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun6i-a31.dtsi
|
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
|
2023-04-08 14:33:10 +02:00 |
sun6i-a31s-colorfly-e708-q1.dts
|
|
|
sun6i-a31s-cs908.dts
|
|
|
sun6i-a31s-inet-q972.dts
|
|
|
sun6i-a31s-primo81.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun6i-a31s-sina31s-core.dtsi
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun6i-a31s-sina31s.dts
|
ARM: dts: sunxi: Fix GPIO LED node names
|
2023-01-27 22:34:32 +01:00 |
sun6i-a31s-sinovoip-bpi-m2.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun6i-a31s-yones-toptech-bs1078-v2.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun6i-a31s.dtsi
|
|
|
sun6i-reference-design-tablet.dtsi
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun7i-a20-bananapi-m1-plus.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-bananapi.dts
|
ARM: dts: sunxi: Fix OPP arrays
|
2021-09-13 09:04:30 +02:00 |
sun7i-a20-bananapro.dts
|
ARM: SoC devicetree updates for v5.12
|
2021-02-20 18:34:53 -08:00 |
sun7i-a20-cubieboard2.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-cubietruck.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-haoyu-marsboard.dts
|
ARM: dts: sun7i: Add A20-Marsboard
|
2022-01-24 09:11:26 +01:00 |
sun7i-a20-hummingbird.dts
|
|
|
sun7i-a20-i12-tvbox.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-icnova-swac.dts
|
|
|
sun7i-a20-itead-ibox.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-lamobo-r1.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-linutronix-testbox-v2.dts
|
|
|
sun7i-a20-m3.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-mk808c.dts
|
|
|
sun7i-a20-olimex-som-evb-emmc.dts
|
|
|
sun7i-a20-olimex-som-evb.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-olimex-som204-evb-emmc.dts
|
|
|
sun7i-a20-olimex-som204-evb.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-olinuxino-lime-emmc.dts
|
|
|
sun7i-a20-olinuxino-lime.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-olinuxino-lime2-emmc.dts
|
|
|
sun7i-a20-olinuxino-lime2.dts
|
ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
|
2021-09-24 09:29:00 +02:00 |
sun7i-a20-olinuxino-micro-emmc.dts
|
|
|
sun7i-a20-olinuxino-micro.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-orangepi-mini.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-orangepi.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-pcduino3-nano.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-pcduino3.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun7i-a20-wexler-tab7200.dts
|
ARM: dts: sunxi: Add missing backlight supply
|
2021-01-18 10:13:16 +01:00 |
sun7i-a20-wits-pro-a20-dkt.dts
|
|
|
sun7i-a20.dtsi
|
ARM: dts: sunxi: Fix OPP arrays
|
2021-09-13 09:04:30 +02:00 |
sun8i-a23-a33.dtsi
|
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
|
2023-04-08 14:33:45 +02:00 |
sun8i-a23-evb.dts
|
|
|
sun8i-a23-gt90h-v4.dts
|
|
|
sun8i-a23-inet86dz.dts
|
|
|
sun8i-a23-ippo-q8h-v1.2.dts
|
|
|
sun8i-a23-ippo-q8h-v5.dts
|
|
|
sun8i-a23-polaroid-mid2407pxe03.dts
|
|
|
sun8i-a23-polaroid-mid2809pxe04.dts
|
|
|
sun8i-a23-q8-tablet.dts
|
|
|
sun8i-a23.dtsi
|
|
|
sun8i-a33-et-q8-v1.6.dts
|
|
|
sun8i-a33-ga10h-v1.1.dts
|
|
|
sun8i-a33-inet-d978-rev2.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun8i-a33-ippo-q8h-v1.2.dts
|
|
|
sun8i-a33-olinuxino.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun8i-a33-q8-tablet.dts
|
|
|
sun8i-a33-sinlinx-sina33.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun8i-a33.dtsi
|
ARM: dts: sun8i: a33: Add DPHY interrupt
|
2023-01-27 22:34:32 +01:00 |
sun8i-a83t-allwinner-h8homlet-v2.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun8i-a83t-bananapi-m3.dts
|
ARM: dts: sun8i: a83t: bananapi-m3: describe SATA disk regulator
|
2023-01-27 22:34:32 +01:00 |
sun8i-a83t-cubietruck-plus.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun8i-a83t-tbs-a711.dts
|
ARM: dts: tbs711: Fix touchscreen compatible
|
2021-09-13 09:04:31 +02:00 |
sun8i-a83t.dtsi
|
ARM: dts: sunxi: Fix OPPs node name
|
2021-09-13 09:04:30 +02:00 |
sun8i-h2-plus-bananapi-m2-zero.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun8i-h2-plus-libretech-all-h3-cc.dts
|
|
|
sun8i-h2-plus-orangepi-r1.dts
|
|
|
sun8i-h2-plus-orangepi-zero.dts
|
ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
|
2022-07-08 20:30:43 +02:00 |
sun8i-h3-bananapi-m2-plus-v1.2.dts
|
|
|
sun8i-h3-bananapi-m2-plus.dts
|
|
|
sun8i-h3-beelink-x2.dts
|
ARM: dts: sun8i: h3-beelink-x2: align HDMI CEC node names with dtschema
|
2023-01-27 22:34:32 +01:00 |
sun8i-h3-emlid-neutis-n5h3-devboard.dts
|
|
|
sun8i-h3-emlid-neutis-n5h3.dtsi
|
|
|
sun8i-h3-libretech-all-h3-cc.dts
|
|
|
sun8i-h3-mapleboard-mp130.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun8i-h3-nanopi-duo2.dts
|
ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
|
2023-01-27 22:34:32 +01:00 |
sun8i-h3-nanopi-m1-plus.dts
|
|
|
sun8i-h3-nanopi-m1.dts
|
|
|
sun8i-h3-nanopi-neo-air.dts
|
ARM: dts: sunxi: Use constants for RTC clock indexes
|
2022-06-13 22:51:50 +02:00 |
sun8i-h3-nanopi-neo.dts
|
ARM: dts: sun8i: Add ethernet0 alias in Nanopi NEO's device tree
|
2022-01-31 10:21:50 +01:00 |
sun8i-h3-nanopi-r1.dts
|
ARM: dts: sunxi: Use constants for RTC clock indexes
|
2022-06-13 22:51:50 +02:00 |
sun8i-h3-nanopi.dtsi
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun8i-h3-orangepi-2.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun8i-h3-orangepi-lite.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun8i-h3-orangepi-one.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun8i-h3-orangepi-pc-plus.dts
|
|
|
sun8i-h3-orangepi-pc.dts
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sun8i-h3-orangepi-plus.dts
|
ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-mode
|
2021-05-24 14:34:50 +02:00 |
sun8i-h3-orangepi-plus2e.dts
|
|
|
sun8i-h3-orangepi-zero-plus2.dts
|
ARM: dts: sunxi: Fix the LED node names
|
2021-01-18 10:13:16 +01:00 |
sun8i-h3-rervision-dvk.dts
|
|
|
sun8i-h3-zeropi.dts
|
|
|
sun8i-h3.dtsi
|
ARM: dts: sun8i-h3: Drop args in 'thermal-sensors'
|
2022-02-07 10:16:10 +01:00 |
sun8i-q8-common.dtsi
|
|
|
sun8i-r16-bananapi-m2m.dts
|
ARM: dts: sunxi: Use constants for RTC clock indexes
|
2022-06-13 22:51:50 +02:00 |
sun8i-r16-nintendo-nes-classic.dts
|
|
|
sun8i-r16-nintendo-super-nes-classic.dts
|
|
|
sun8i-r16-parrot.dts
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun8i-r40-bananapi-m2-ultra.dts
|
ARM: dts: sun8i-r40: add opp table for cpu
|
2022-07-05 21:40:13 +02:00 |
sun8i-r40-cpu-opp.dtsi
|
ARM: dts: sun8i-r40: add opp table for cpu
|
2022-07-05 21:40:13 +02:00 |
sun8i-r40-feta40i.dtsi
|
ARM: dts: sun8i-r40: add opp table for cpu
|
2022-07-05 21:40:13 +02:00 |
sun8i-r40-oka40i-c.dts
|
ARM: dts: sun8i: r40: add devicetree for Forlinx FETA40i-C & OKA40i-C
|
2021-05-10 09:14:43 +02:00 |
sun8i-r40.dtsi
|
ARM: dts: sun8i-r40: Add thermal trip points/cooling maps
|
2022-07-05 21:40:18 +02:00 |
sun8i-reference-design-tablet.dtsi
|
ARM: dts: sunxi: Use the new r_intc binding
|
2021-03-06 15:39:17 +08:00 |
sun8i-s3-elimo-impetus.dtsi
|
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
|
2021-01-31 19:49:19 +01:00 |
sun8i-s3-elimo-initium.dts
|
|
|
sun8i-s3-lichee-zero-plus.dts
|
|
|
sun8i-s3-pinecube.dts
|
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
|
2021-01-31 19:49:19 +01:00 |
sun8i-t3-cqa3t-bv3.dts
|
ARM: dts: sun8i-r40: add opp table for cpu
|
2022-07-05 21:40:13 +02:00 |
sun8i-t113s-mangopi-mq-r-t113.dts
|
ARM: dts: sunxi: add MangoPi MQ-R-T113 board
|
2023-03-27 22:45:22 +02:00 |
sun8i-t113s.dtsi
|
ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi
|
2023-03-27 22:45:22 +02:00 |
sun8i-v3-sl631-imx179.dts
|
ARM: dts: sun8i-v3: Add support for the SL631 Action Camera with IMX179
|
2021-01-06 17:49:58 +01:00 |
sun8i-v3-sl631.dtsi
|
ARM: dts: sunxi: Fix the SPI NOR node names
|
2021-09-13 09:04:31 +02:00 |
sun8i-v3.dtsi
|
ARM: dts: sun8i: V3: add I2S interface to V3 dts
|
2021-05-18 17:19:17 +02:00 |
sun8i-v3s-licheepi-zero-dock.dts
|
ARM: dts: sun8i: v3s: enable emac for zero Dock
|
2021-05-31 11:43:03 +02:00 |
sun8i-v3s-licheepi-zero.dts
|
|
|
sun8i-v3s.dtsi
|
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
|
2023-04-08 14:33:52 +02:00 |
sun8i-v40-bananapi-m2-berry.dts
|
ARM: dts: sun8i-r40: add opp table for cpu
|
2022-07-05 21:40:13 +02:00 |
sun9i-a80-cubieboard4.dts
|
ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible
|
2021-09-13 09:04:32 +02:00 |
sun9i-a80-optimus.dts
|
|
|
sun9i-a80.dtsi
|
ARM: dts: sunxi: Drop resets from r_pio nodes
|
2022-06-15 15:54:37 +02:00 |
suniv-f1c100s-licheepi-nano.dts
|
ARM: dts: suniv: licheepi-nano: enable USB
|
2023-03-23 21:57:33 +01:00 |
suniv-f1c100s.dtsi
|
ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
|
2023-03-23 21:57:34 +01:00 |
suniv-f1c200s-lctech-pi.dts
|
ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
|
2023-03-23 21:57:34 +01:00 |
suniv-f1c200s-popstick-v1.1.dts
|
ARM: dts: suniv: add device tree for PopStick v1.1
|
2023-03-23 21:57:33 +01:00 |
sunplus-sp7021-achip.dtsi
|
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
|
2022-07-08 14:24:16 +02:00 |
sunplus-sp7021-demo-v3.dts
|
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
|
2022-07-08 14:24:16 +02:00 |
sunplus-sp7021.dtsi
|
ARM: dts: sunplus: sp7021: drop incorrect spi-max-frequency
|
2022-10-17 17:46:57 -04:00 |
sunxi-bananapi-m2-plus-v1.2.dtsi
|
|
|
sunxi-bananapi-m2-plus.dtsi
|
ARM: dts: sunxi: correct indentation
|
2022-10-26 12:53:52 -04:00 |
sunxi-common-regulators.dtsi
|
|
|
sunxi-d1s-t113-mangopi-mq-r.dtsi
|
ARM: dts: sunxi: add MangoPi MQ-R-T113 board
|
2023-03-27 22:45:22 +02:00 |
sunxi-h3-h5-emlid-neutis.dtsi
|
ARM: dts: sunxi: Use constants for RTC clock indexes
|
2022-06-13 22:51:50 +02:00 |
sunxi-h3-h5.dtsi
|
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
|
2023-04-08 14:34:15 +02:00 |
sunxi-itead-core-common.dtsi
|
|
|
sunxi-libretech-all-h3-cc.dtsi
|
ARM: dts: allwinner: align gpio-key node names with dtschema
|
2022-06-14 22:24:38 +02:00 |
sunxi-libretech-all-h3-it.dtsi
|
ARM: dts: sunxi: Fix the SPI NOR node names
|
2021-09-13 09:04:31 +02:00 |
sunxi-reference-design-tablet.dtsi
|
|
|
tegra20-acer-a500-picasso.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-asus-tf101.dts
|
ARM: tegra: asus-tf101: Fix accelerometer mount matrix
|
2023-04-04 14:32:07 +02:00 |
tegra20-colibri-eval-v3.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-colibri-iris.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-colibri.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-cpu-opp-microvolt.dtsi
|
ARM: tegra: Rename CPU and EMC OPP table device-tree nodes
|
2021-12-14 16:07:42 +01:00 |
tegra20-cpu-opp.dtsi
|
ARM: tegra: Rename CPU and EMC OPP table device-tree nodes
|
2021-12-14 16:07:42 +01:00 |
tegra20-harmony.dts
|
ARM: tegra: Align gpio-keys node names with dtschema
|
2022-06-24 18:15:53 +02:00 |
tegra20-medcom-wide.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-paz00.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-peripherals-opp.dtsi
|
ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees
|
2021-12-16 14:23:17 +01:00 |
tegra20-plutux.dts
|
ARM: tegra: Rename top-level regulators
|
2021-12-14 16:05:25 +01:00 |
tegra20-seaboard.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-tamonten.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-tec.dts
|
ARM: tegra: Rename top-level regulators
|
2021-12-14 16:05:25 +01:00 |
tegra20-trimslice.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20-ventana.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra20.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-apalis-eval.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-apalis-v1.1-eval.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-apalis-v1.1.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-apalis.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-asus-lvds-display.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-asus-nexus7-grouper-common.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-asus-nexus7-grouper-E1565.dts
|
|
|
tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-asus-nexus7-grouper-memory-timings.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-asus-nexus7-grouper-PM269.dts
|
|
|
tegra30-asus-nexus7-grouper-ti-pmic.dtsi
|
ARM: tegra: Rename top-level regulators
|
2021-12-14 16:05:25 +01:00 |
tegra30-asus-nexus7-grouper.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-asus-nexus7-tilapia-E1565.dts
|
|
|
tegra30-asus-nexus7-tilapia-memory-timings.dtsi
|
|
|
tegra30-asus-nexus7-tilapia.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-asus-tf201.dts
|
ARM: tegra: transformers: Bind RT5631 sound nodes
|
2023-03-28 13:18:42 +02:00 |
tegra30-asus-tf300t.dts
|
ARM: tegra: transformers: Update WM8903 sound nodes
|
2023-03-28 13:17:43 +02:00 |
tegra30-asus-tf300tg.dts
|
ARM: tegra: transformers: Bind RT5631 sound nodes
|
2023-03-28 13:18:42 +02:00 |
tegra30-asus-tf700t.dts
|
ARM: tegra: transformers: Bind RT5631 sound nodes
|
2023-03-28 13:18:42 +02:00 |
tegra30-asus-transformer-common.dtsi
|
ARM: tegra: transformers: Update WM8903 sound nodes
|
2023-03-28 13:17:43 +02:00 |
tegra30-beaver.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-cardhu-a02.dts
|
ARM: tegra: Rename top-level regulators
|
2021-12-14 16:05:25 +01:00 |
tegra30-cardhu-a04.dts
|
ARM: tegra: Rename top-level regulators
|
2021-12-14 16:05:25 +01:00 |
tegra30-cardhu.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-colibri-eval-v3.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-colibri.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-cpu-opp-microvolt.dtsi
|
ARM: tegra: Rename CPU and EMC OPP table device-tree nodes
|
2021-12-14 16:07:42 +01:00 |
tegra30-cpu-opp.dtsi
|
ARM: tegra: Rename CPU and EMC OPP table device-tree nodes
|
2021-12-14 16:07:42 +01:00 |
tegra30-ouya.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-pegatron-chagall.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra30-peripherals-opp.dtsi
|
ARM: tegra30: peripherals: Add 266.5MHz nodes
|
2023-04-04 14:32:21 +02:00 |
tegra30.dtsi
|
ARM: tegra30: Use cpu* labels
|
2023-04-04 14:32:48 +02:00 |
tegra114-asus-tf701t.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra114-dalmore.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra114-roth.dts
|
ARM: tegra: Align gpio-keys node names with dtschema
|
2022-06-24 18:15:53 +02:00 |
tegra114-tn7.dts
|
ARM: tegra: Align gpio-keys node names with dtschema
|
2022-06-24 18:15:53 +02:00 |
tegra114.dtsi
|
ARM: tegra: Add memory client hotflush resets on Tegra114
|
2021-12-17 14:55:32 +01:00 |
tegra124-apalis-emc.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-apalis-eval.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-apalis-v1.2-eval.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-apalis-v1.2.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-apalis.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-jetson-tk1-emc.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-jetson-tk1.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-nyan-big-emc.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-nyan-big-fhd.dts
|
ARM: tegra: Move Nyan FHD panels to AUX bus
|
2022-03-07 19:02:39 +01:00 |
tegra124-nyan-big.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-nyan-blaze-emc.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-nyan-blaze.dts
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-nyan.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tegra124-peripherals-opp.dtsi
|
ARM: tegra: Rename CPU and EMC OPP table device-tree nodes
|
2021-12-14 16:07:42 +01:00 |
tegra124-venice2.dts
|
ARM: tegra: Add missing power-supply for panels
|
2022-11-18 00:21:41 +01:00 |
tegra124.dtsi
|
ARM: tegra: Sort nodes by unit-address, then alphabetically
|
2023-01-23 12:07:15 +01:00 |
tny_a9g20.dts
|
|
|
tny_a9260.dts
|
|
|
tny_a9260_common.dtsi
|
|
|
tny_a9263.dts
|
|
|
tps6507x.dtsi
|
|
|
tps65217.dtsi
|
|
|
tps65910.dtsi
|
|
|
twl4030.dtsi
|
|
|
twl4030_omap3.dtsi
|
|
|
twl6030.dtsi
|
|
|
twl6030_omap4.dtsi
|
|
|
uniphier-ld4-ref.dts
|
ARM: dts: uniphier: Use GIC interrupt definitions
|
2022-09-28 22:41:35 +02:00 |
uniphier-ld4.dtsi
|
ARM: dts: uniphier: Add syscon compatible string to soc-glue-debug
|
2023-02-09 13:58:44 +01:00 |
uniphier-ld6b-ref.dts
|
ARM: dts: uniphier: Use GIC interrupt definitions
|
2022-09-28 22:41:35 +02:00 |
uniphier-ld6b.dtsi
|
|
|
uniphier-pinctrl.dtsi
|
arm64: dts: uniphier: Add USB-device support for PXs3 reference board
|
2022-09-28 22:41:47 +02:00 |
uniphier-pro4-ace.dts
|
ARM: dts: uniphier: Add ahci controller nodes for Pro4
|
2022-09-28 22:41:35 +02:00 |
uniphier-pro4-ref.dts
|
ARM: dts: uniphier: Add ahci controller nodes for Pro4
|
2022-09-28 22:41:35 +02:00 |
uniphier-pro4-sanji.dts
|
|
|
uniphier-pro4.dtsi
|
ARM: dts: uniphier: Add syscon-uhs-mode to SD node
|
2023-02-09 13:58:44 +01:00 |
uniphier-pro5-epcore.dts
|
ARM: dts: uniphier: Add Pro5 board support
|
2022-11-21 10:56:10 +01:00 |
uniphier-pro5-proex.dts
|
ARM: dts: uniphier: Add Pro5 board support
|
2022-11-21 10:56:10 +01:00 |
uniphier-pro5.dtsi
|
ARM: dts: uniphier: Add syscon-uhs-mode to SD node
|
2023-02-09 13:58:44 +01:00 |
uniphier-pxs2-gentil.dts
|
ARM: dts: uniphier: Add ahci controller nodes for PXs2
|
2022-09-28 22:41:35 +02:00 |
uniphier-pxs2-vodka.dts
|
|
|
uniphier-pxs2.dtsi
|
ARM: dts: uniphier: Add syscon-uhs-mode to SD node
|
2023-02-09 13:58:44 +01:00 |
uniphier-ref-daughter.dtsi
|
|
|
uniphier-sld8-ref.dts
|
ARM: dts: uniphier: Use GIC interrupt definitions
|
2022-09-28 22:41:35 +02:00 |
uniphier-sld8.dtsi
|
ARM: dts: uniphier: Add syscon-uhs-mode to SD node
|
2023-02-09 13:58:44 +01:00 |
uniphier-support-card.dtsi
|
ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card
|
2022-09-28 22:41:35 +02:00 |
usb_a9g20-dab-mmx.dtsi
|
|
|
usb_a9g20.dts
|
|
|
usb_a9g20_common.dtsi
|
|
|
usb_a9g20_lpw.dts
|
|
|
usb_a9260.dts
|
|
|
usb_a9260_common.dtsi
|
|
|
usb_a9263.dts
|
ARM: dts: at91: use generic node name for dataflash
|
2022-05-13 16:25:25 +03:00 |
versatile-ab-ib2.dts
|
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
|
2021-10-26 17:20:41 +02:00 |
versatile-ab.dts
|
ARM: dts: arm: align UART node name with bindings
|
2023-01-26 11:19:57 +01:00 |
versatile-pb.dts
|
ARM: dts: arm: align UART node name with bindings
|
2023-01-26 11:19:57 +01:00 |
vexpress-v2m-rs1.dtsi
|
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
|
2021-09-26 15:33:30 +01:00 |
vexpress-v2m.dtsi
|
ARM: dts: arm: align UART node name with bindings
|
2023-01-26 11:19:57 +01:00 |
vexpress-v2p-ca5s.dts
|
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
|
2021-09-26 15:33:30 +01:00 |
vexpress-v2p-ca9.dts
|
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
|
2021-09-26 15:33:30 +01:00 |
vexpress-v2p-ca15-tc1.dts
|
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
|
2021-09-26 15:33:30 +01:00 |
vexpress-v2p-ca15_a7.dts
|
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
|
2021-09-26 15:33:30 +01:00 |
vf-colibri-eval-v3.dtsi
|
ARM: dts: imx: Rename RTC device tree nodes
|
2022-01-28 12:03:34 +08:00 |
vf-colibri.dtsi
|
|
|
vf500-colibri-eval-v3.dts
|
|
|
vf500-colibri.dtsi
|
|
|
vf500.dtsi
|
|
|
vf610-bk4.dts
|
ARM: dts: vf610: align LED node names with dtschema
|
2022-12-31 19:43:05 +08:00 |
vf610-colibri-eval-v3.dts
|
|
|
vf610-colibri.dtsi
|
|
|
vf610-cosmic.dts
|
|
|
vf610-pinfunc.h
|
ARM: dts: vf610: ddr pinmux
|
2022-09-03 09:47:43 +08:00 |
vf610-twr.dts
|
ARM: dts: vf610-twr: indent use tabs, no spaces at start of line
|
2022-08-21 15:49:22 +08:00 |
vf610-zii-cfu1.dts
|
|
|
vf610-zii-dev-rev-b.dts
|
ARM: dts: vf610: Fix pca9548 i2c-mux node names
|
2022-12-31 20:38:39 +08:00 |
vf610-zii-dev-rev-c.dts
|
ARM: dts: vf610: Fix pca9548 i2c-mux node names
|
2022-12-31 20:38:39 +08:00 |
vf610-zii-dev.dtsi
|
ARM: dts: vf610: align LED node names with dtschema
|
2022-12-31 19:43:05 +08:00 |
vf610-zii-scu4-aib.dts
|
ARM: dts: vf610: align LED node names with dtschema
|
2022-12-31 19:43:05 +08:00 |
vf610-zii-spb4.dts
|
ARM: dts: imx: use generic node name for rave-sp
|
2023-01-26 19:40:18 +08:00 |
vf610-zii-ssmb-dtu.dts
|
|
|
vf610-zii-ssmb-spu3.dts
|
ARM: dts: imx: use generic node name for rave-sp
|
2023-01-26 19:40:18 +08:00 |
vf610.dtsi
|
ARM: dts: vf610: don't use multiple blank lines
|
2022-08-21 15:49:25 +08:00 |
vf610m4-colibri.dts
|
|
|
vf610m4-cosmic.dts
|
|
|
vf610m4.dtsi
|
|
|
vfxxx.dtsi
|
ARM: dts: vfxxx: Swap SAI DMA order
|
2023-01-26 07:57:06 +08:00 |
vt8500-bv07.dts
|
|
|
vt8500.dtsi
|
|
|
wm8505-ref.dts
|
|
|
wm8505.dtsi
|
|
|
wm8650-mid.dts
|
|
|
wm8650.dtsi
|
|
|
wm8750-apc8750.dts
|
|
|
wm8750.dtsi
|
|
|
wm8850-w70v2.dts
|
|
|
wm8850.dtsi
|
|
|
xenvm-4.2.dts
|
|
|
zynq-7000.dtsi
|
ARM: zynq: Use recommended dma-controller name instead of dmac
|
2023-01-19 14:02:13 +01:00 |
zynq-cc108.dts
|
|
|
zynq-ebaz4205.dts
|
ARM: dts: ebaz4205: enable NAND support
|
2021-08-06 12:22:40 +02:00 |
zynq-microzed.dts
|
|
|
zynq-parallella.dts
|
|
|
zynq-zc702.dts
|
ARM: dts: xilinx: align gpio-key node names with dtschema
|
2022-06-23 10:11:41 +02:00 |
zynq-zc706.dts
|
|
|
zynq-zc770-xm010.dts
|
|
|
zynq-zc770-xm011.dts
|
|
|
zynq-zc770-xm012.dts
|
|
|
zynq-zc770-xm013.dts
|
|
|
zynq-zed.dts
|
|
|
zynq-zturn-common.dtsi
|
ARM: dts: xilinx: align gpio-key node names with dtschema
|
2022-06-23 10:11:41 +02:00 |
zynq-zturn-v5.dts
|
|
|
zynq-zturn.dts
|
|
|
zynq-zybo-z7.dts
|
|
|
zynq-zybo.dts
|
|
|