niansa-misc/linux
1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
Code Issues Projects Releases Packages Wiki Activity
linux/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
Rob Herring 724ba67515 ARM: dts: Move .dts files to vendor sub-directories 
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21 11:39:50 -06:00

466 lines
13 KiB
Text
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
* Copyright 2017-2018 NXP
* Dong Aisheng <aisheng.dong@nxp.com>
*/
#include <dt-bindings/clock/imx7ulp-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx7ulp-pinfunc.h"
/ {
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
aliases {
gpio0 = &gpio_ptc;
gpio1 = &gpio_ptd;
gpio2 = &gpio_pte;
gpio3 = &gpio_ptf;
i2c0 = &lpi2c6;
i2c1 = &lpi2c7;
mmc0 = &usdhc0;
mmc1 = &usdhc1;
serial0 = &lpuart4;
serial1 = &lpuart5;
serial2 = &lpuart6;
serial3 = &lpuart7;
usbphy0 = &usbphy1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf00>;
};
};
intc: interrupt-controller@40021000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x40021000 0x1000>,
<0x40022000 0x1000>;
};
rosc: clock-rosc {
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "rosc";
#clock-cells = <0>;
};
sosc: clock-sosc {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "sosc";
#clock-cells = <0>;
};
sirc: clock-sirc {
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-output-names = "sirc";
#clock-cells = <0>;
};
firc: clock-firc {
compatible = "fixed-clock";
clock-frequency = <48000000>;
clock-output-names = "firc";
#clock-cells = <0>;
};
upll: clock-upll {
compatible = "fixed-clock";
clock-frequency = <480000000>;
clock-output-names = "upll";
#clock-cells = <0>;
};
ahbbridge0: bus@40000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x800000>;
ranges;
edma1: dma-controller@40080000 {
#dma-cells = <2>;
compatible = "fsl,imx7ulp-edma";
reg = <0x40080000 0x2000>,
<0x40210000 0x1000>;
dma-channels = <32>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dma", "dmamux0";
clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
<&pcc2 IMX7ULP_CLK_DMA_MUX1>;
};
crypto: crypto@40240000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40240000 0x10000>;
ranges = <0 0x40240000 0x10000>;
clocks = <&pcc2 IMX7ULP_CLK_CAAM>,
<&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
clock-names = "aclk", "ipg";
sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
};
};
lpuart4: serial@402d0000 {
compatible = "fsl,imx7ulp-lpuart";
reg = <0x402d0000 0x1000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
clock-names = "ipg";
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
assigned-clock-rates = <24000000>;
status = "disabled";
};
lpuart5: serial@402e0000 {
compatible = "fsl,imx7ulp-lpuart";
reg = <0x402e0000 0x1000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
clock-names = "ipg";
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
tpm4: pwm@40250000 {
compatible = "fsl,imx7ulp-pwm";
reg = <0x40250000 0x1000>;
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
#pwm-cells = <3>;
status = "disabled";
};
tpm5: tpm@40260000 {
compatible = "fsl,imx7ulp-tpm";
reg = <0x40260000 0x1000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
<&pcc2 IMX7ULP_CLK_LPTPM5>;
clock-names = "ipg", "per";
};
usbotg1: usb@40330000 {
compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
reg = <0x40330000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc2 IMX7ULP_CLK_USB0>;
phys = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x8>;
rx-burst-size-dword = <0x8>;
status = "disabled";
};
usbmisc1: usbmisc@40330200 {
compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
"fsl,imx6q-usbmisc";
#index-cells = <1>;
reg = <0x40330200 0x200>;
};
usbphy1: usb-phy@40350000 {
compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
reg = <0x40350000 0x1000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
#phy-cells = <0>;
};
usdhc0: mmc@40370000 {
compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
reg = <0x40370000 0x10000>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
<&pcc2 IMX7ULP_CLK_USDHC0>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
status = "disabled";
};
usdhc1: mmc@40380000 {
compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
reg = <0x40380000 0x10000>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
<&pcc2 IMX7ULP_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
status = "disabled";
};
scg1: clock-controller@403e0000 {
compatible = "fsl,imx7ulp-scg1";
reg = <0x403e0000 0x10000>;
clocks = <&rosc>, <&sosc>, <&sirc>,
<&firc>, <&upll>;
clock-names = "rosc", "sosc", "sirc",
"firc", "upll";
#clock-cells = <1>;
};
wdog1: watchdog@403d0000 {
compatible = "fsl,imx7ulp-wdt";
reg = <0x403d0000 0x10000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
timeout-sec = <40>;
};
pcc2: clock-controller@403f0000 {
compatible = "fsl,imx7ulp-pcc2";
reg = <0x403f0000 0x10000>;
#clock-cells = <1>;
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
<&scg1 IMX7ULP_CLK_DDR_DIV>,
<&scg1 IMX7ULP_CLK_APLL_PFD2>,
<&scg1 IMX7ULP_CLK_APLL_PFD1>,
<&scg1 IMX7ULP_CLK_APLL_PFD0>,
<&scg1 IMX7ULP_CLK_UPLL>,
<&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
<&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
<&scg1 IMX7ULP_CLK_ROSC>,
<&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
"apll_pfd2", "apll_pfd1", "apll_pfd0",
"upll", "sosc_bus_clk",
"firc_bus_clk", "rosc", "spll_bus_clk";
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
};
smc1: clock-controller@40410000 {
compatible = "fsl,imx7ulp-smc1";
reg = <0x40410000 0x1000>;
#clock-cells = <1>;
clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>,
<&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>;
clock-names = "divcore", "hsrun_divcore";
};
pcc3: clock-controller@40b30000 {
compatible = "fsl,imx7ulp-pcc3";
reg = <0x40b30000 0x10000>;
#clock-cells = <1>;
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
<&scg1 IMX7ULP_CLK_DDR_DIV>,
<&scg1 IMX7ULP_CLK_APLL_PFD2>,
<&scg1 IMX7ULP_CLK_APLL_PFD1>,
<&scg1 IMX7ULP_CLK_APLL_PFD0>,
<&scg1 IMX7ULP_CLK_UPLL>,
<&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
<&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
<&scg1 IMX7ULP_CLK_ROSC>,
<&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
"apll_pfd2", "apll_pfd1", "apll_pfd0",
"upll", "sosc_bus_clk",
"firc_bus_clk", "rosc", "spll_bus_clk";
};
};
ahbbridge1: bus@40800000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40800000 0x800000>;
ranges;
lpi2c6: i2c@40a40000 {
compatible = "fsl,imx7ulp-lpi2c";
reg = <0x40a40000 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>,
<&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
clock-names = "per", "ipg";
assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
lpi2c7: i2c@40a50000 {
compatible = "fsl,imx7ulp-lpi2c";
reg = <0x40a50000 0x10000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>,
<&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
clock-names = "per", "ipg";
assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
lpuart6: serial@40a60000 {
compatible = "fsl,imx7ulp-lpuart";
reg = <0x40a60000 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
clock-names = "ipg";
assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
lpuart7: serial@40a70000 {
compatible = "fsl,imx7ulp-lpuart";
reg = <0x40a70000 0x1000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX7ULP_CLK_LPUART7>;
clock-names = "ipg";
assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
memory-controller@40ab0000 {
compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
reg = <0x40ab0000 0x1000>;
clocks = <&pcc3 IMX7ULP_CLK_MMDC>;
};
iomuxc1: pinctrl@40ac0000 {
compatible = "fsl,imx7ulp-iomuxc1";
reg = <0x40ac0000 0x1000>;
};
gpio_ptc: gpio@40ae0000 {
compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
reg = <0x40ae0000 0x1000 0x400f0000 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLC>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 0 20>;
};
gpio_ptd: gpio@40af0000 {
compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
reg = <0x40af0000 0x1000 0x400f0040 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLD>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 32 12>;
};
gpio_pte: gpio@40b00000 {
compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
reg = <0x40b00000 0x1000 0x400f0080 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 64 16>;
};
gpio_ptf: gpio@40b10000 {
compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
reg = <0x40b10000 0x1000 0x400f00c0 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLF>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 96 20>;
};
};
m4aips1: bus@41080000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x41080000 0x80000>;
ranges;
sim: sim@410a3000 {
compatible = "fsl,imx7ulp-sim", "syscon";
reg = <0x410a3000 0x1000>;
};
ocotp: efuse@410a6000 {
compatible = "fsl,imx7ulp-ocotp", "syscon";
reg = <0x410a6000 0x4000>;
clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
#address-cells = <1>;
#size-cells = <1>;
};
};
};
Reference in a new issue View git blame Copy permalink