44d5061fe2
Move the usb2_picophy1 and usb2_picophy2 nodes out of the soc section. Since they are controlled via syscfg, there is no reg property needed, which is required when having the node within the soc section. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
118 lines
3.2 KiB
Text
118 lines
3.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2014 STMicroelectronics Limited.
|
|
* Author: Peter Griffin <peter.griffin@linaro.org>
|
|
*/
|
|
#include "stih418-clock.dtsi"
|
|
#include "stih407-family.dtsi"
|
|
#include "stih410-pinctrl.dtsi"
|
|
/ {
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <2>;
|
|
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
|
|
cpu-release-addr = <0x94100A4>;
|
|
};
|
|
cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <3>;
|
|
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
|
|
cpu-release-addr = <0x94100A4>;
|
|
};
|
|
};
|
|
|
|
usb2_picophy1: phy2 {
|
|
compatible = "st,stih407-usb2-phy";
|
|
#phy-cells = <0>;
|
|
st,syscfg = <&syscfg_core 0xf8 0xf4>;
|
|
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
|
|
<&picophyreset STIH407_PICOPHY0_RESET>;
|
|
reset-names = "global", "port";
|
|
};
|
|
|
|
usb2_picophy2: phy3 {
|
|
compatible = "st,stih407-usb2-phy";
|
|
#phy-cells = <0>;
|
|
st,syscfg = <&syscfg_core 0xfc 0xf4>;
|
|
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
|
|
<&picophyreset STIH407_PICOPHY1_RESET>;
|
|
reset-names = "global", "port";
|
|
};
|
|
|
|
soc {
|
|
rng11: rng@8a8a000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@9a03c00 {
|
|
compatible = "st,st-ohci-300x";
|
|
reg = <0x9a03c00 0x100>;
|
|
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
|
|
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
|
|
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
|
|
reset-names = "power", "softreset";
|
|
phys = <&usb2_picophy1>;
|
|
phy-names = "usb";
|
|
};
|
|
|
|
ehci0: usb@9a03e00 {
|
|
compatible = "st,st-ehci-300x";
|
|
reg = <0x9a03e00 0x100>;
|
|
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb0>;
|
|
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
|
|
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
|
|
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
|
|
reset-names = "power", "softreset";
|
|
phys = <&usb2_picophy1>;
|
|
phy-names = "usb";
|
|
};
|
|
|
|
ohci1: usb@9a83c00 {
|
|
compatible = "st,st-ohci-300x";
|
|
reg = <0x9a83c00 0x100>;
|
|
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
|
|
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
|
|
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
|
|
reset-names = "power", "softreset";
|
|
phys = <&usb2_picophy2>;
|
|
phy-names = "usb";
|
|
};
|
|
|
|
ehci1: usb@9a83e00 {
|
|
compatible = "st,st-ehci-300x";
|
|
reg = <0x9a83e00 0x100>;
|
|
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb1>;
|
|
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
|
|
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
|
|
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
|
|
reset-names = "power", "softreset";
|
|
phys = <&usb2_picophy2>;
|
|
phy-names = "usb";
|
|
};
|
|
|
|
mmc0: sdhci@9060000 {
|
|
assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
|
|
assigned-clock-parents = <&clk_s_c0_pll1 0>;
|
|
assigned-clock-rates = <200000000>;
|
|
};
|
|
|
|
thermal@91a0000 {
|
|
compatible = "st,stih407-thermal";
|
|
reg = <0x91a0000 0x28>;
|
|
clock-names = "thermal";
|
|
clocks = <&clk_sysin>;
|
|
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|
|
};
|