1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
linux/mm/zswap.c
Kanchana P Sridhar b7c0ccdfba mm: zswap: support large folios in zswap_store()
This series enables zswap_store() to accept and store large folios.  The
most significant contribution in this series is from the earlier RFC
submitted by Ryan Roberts [1].  Ryan's original RFC has been migrated to
mm-unstable as of 9-30-2024 in patch 6 of this series, and adapted based
on code review comments received for the current patch-series.

[1]: [RFC PATCH v1] mm: zswap: Store large folios without splitting
     https://lore.kernel.org/linux-mm/20231019110543.3284654-1-ryan.roberts@arm.com/T/#u

The first few patches do the prep work for supporting large folios in
zswap_store.  Patch 6 provides the main functionality to swap-out large
folios in zswap.  Patch 7 adds sysfs per-order hugepages "zswpout"
counters that get incremented upon successful zswap_store of large folios,
and also updates the documentation for this:

/sys/kernel/mm/transparent_hugepage/hugepages-*kB/stats/zswpout

This series is a pre-requisite for zswap compress batching of large folio
swap-out and decompress batching of swap-ins based on swapin_readahead(),
using Intel IAA hardware acceleration, which we would like to submit in
subsequent patch-series, with performance improvement data.

Thanks to Ying Huang for pre-posting review feedback and suggestions!

Thanks also to Nhat, Yosry, Johannes, Barry, Chengming, Usama, Ying and
Matthew for their helpful feedback, code/data reviews and suggestions!

I would like to thank Ryan Roberts for his original RFC [1].


System setup for testing:
=========================

Testing of this series was done with mm-unstable as of 9-27-2024, commit
de2fbaa6d9c3576ec7133ed02a370ec9376bf000 (without this patch-series) and
mm-unstable 9-30-2024 commit c121617e3606be6575cdacfdb63cc8d67b46a568
(with this patch-series).  Data was gathered on an Intel Sapphire Rapids
server, dual-socket 56 cores per socket, 4 IAA devices per socket, 503 GiB
RAM and 525G SSD disk partition swap.  Core frequency was fixed at
2500MHz.

The vm-scalability "usemem" test was run in a cgroup whose memory.high was
fixed at 150G.  The is no swap limit set for the cgroup.  30 usemem
processes were run, each allocating and writing 10G of memory, and
sleeping for 10 sec before exiting:

usemem --init-time -w -O -s 10 -n 30 10g

Other kernel configuration parameters:

    zswap compressors : zstd, deflate-iaa
    zswap allocator   : zsmalloc
    vm.page-cluster   : 2

In the experiments where "deflate-iaa" is used as the zswap compressor,
IAA "compression verification" is enabled by default (cat
/sys/bus/dsa/drivers/crypto/verify_compress).  Hence each IAA compression
will be decompressed internally by the "iaa_crypto" driver, the crc-s
returned by the hardware will be compared and errors reported in case of
mismatches.  Thus "deflate-iaa" helps ensure better data integrity as
compared to the software compressors, and the experimental data listed
below is with verify_compress set to "1".

Metrics reporting methodology:
==============================
Total and average throughput are derived from the individual 30 processes'
throughputs reported by usemem.  elapsed/sys times are measured with perf.

All percentage changes are "new" vs.  "old"; hence a positive value
denotes an increase in the metric, whether it is throughput or latency,
and a negative value denotes a reduction in the metric.  Positive
throughput change percentages and negative latency change percentages
denote improvements.

The vm stats and sysfs hugepages stats included with the performance data
provide details on the swapout activity to zswap/swap device.


Testing labels used in data summaries:
======================================
The data refers to these test configurations and the before/after
comparisons that they do:

 before-case1:
 -------------
 mm-unstable 9-27-2024, CONFIG_THP_SWAP=N (compares zswap 4K vs. zswap 64K)

 In this scenario, CONFIG_THP_SWAP=N results in 64K/2M folios to be split
 into 4K folios that get processed by zswap.

 before-case2:
 -------------
 mm-unstable 9-27-2024, CONFIG_THP_SWAP=Y (compares SSD swap large folios vs. zswap large folios)

 In this scenario, CONFIG_THP_SWAP=Y results in zswap rejecting large
 folios, which will then be stored by the SSD swap device.

 after:
 ------
 v10 of this patch-series, CONFIG_THP_SWAP=Y

 The "after" is CONFIG_THP_SWAP=Y and v10 of this patch-series, that results
 in 64K/2M folios to not be split, and to be processed by zswap_store.


Regression Testing:
===================
I ran vm-scalability usemem without large folios, i.e., only 4K folios with
mm-unstable and this patch-series. The main goal was to make sure that
there is no functional or performance regression wrt the earlier zswap
behavior for 4K folios, now that 4K folios will be processed by the new
zswap_store() code.

The data indicates there is no significant regression.

 -------------------------------------------------------------------------------
 4K folios:
 ==========

 zswap compressor                zstd          zstd        zstd       zstd v10
                         before-case1  before-case2       after      vs.     vs.
                                                                   case1   case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)    4,793,363     4,880,978   4,853,074       1%     -1%
 Average throughput (KB/s)    159,778       162,699     161,769       1%     -1%
 elapsed time (sec)            130.14        123.17      126.29      -3%      3%
 sys time (sec)              3,135.53      2,985.64    3,083.18      -2%      3%
 memcg_high                   446,826       444,626     452,930        
 memcg_swap_fail                    0             0           0              
 zswpout                   48,932,107    48,931,971  48,931,820             
 zswpin                           383           386         397            
 pswpout                            0             0           0              
 pswpin                             0             0           0              
 thp_swpout                         0             0           0              
 thp_swpout_fallback                0             0           0              
 64kB-mthp_swpout_fallback          0             0           0              
 pgmajfault                     3,063         3,077       3,479          
 swap_ra                           93            94          96             
 swap_ra_hit                       47            47          50             
 ZSWPOUT-64kB                     n/a           n/a           0              
 SWPOUT-64kB                        0             0           0
 -------------------------------------------------------------------------------


Performance Testing:
====================

We list the data for 64K folios with before/after data per-compressor,
followed by the same for 2M pmd-mappable folios.


 -------------------------------------------------------------------------------
 64K folios: zstd:
 =================

 zswap compressor                zstd          zstd         zstd      zstd v10
                         before-case1  before-case2        after     vs.    vs.
                                                                    case1  case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)    5,222,213     1,076,611    6,159,776      18%   472% 
 Average throughput (KB/s)    174,073        35,887      205,325      18%   472%
 elapsed time (sec)            120.50        347.16       108.33     -10%   -69%
 sys time (sec)              2,930.33        248.16     2,549.65     -13%   927%
 memcg_high                   416,773       552,200      465,874                   
 memcg_swap_fail            3,192,906         1,293        1,012                   
 zswpout                   48,931,583        20,903   48,931,218                  
 zswpin                           384           363          410                   
 pswpout                            0    40,778,448            0                   
 pswpin                             0            16            0                   
 thp_swpout                         0             0            0                   
 thp_swpout_fallback                0             0            0                   
 64kB-mthp_swpout_fallback  3,192,906         1,293        1,012                   
 pgmajfault                     3,452         3,072        3,061                   
 swap_ra                           90            87          107                   
 swap_ra_hit                       42            43           57                   
 ZSWPOUT-64kB                     n/a           n/a    3,057,173                   
 SWPOUT-64kB                        0     2,548,653            0                   
 -------------------------------------------------------------------------------


 -------------------------------------------------------------------------------
 64K folios: deflate-iaa:
 ========================

 zswap compressor         deflate-iaa   deflate-iaa  deflate-iaa deflate-iaa v10
                         before-case1  before-case2        after     vs.     vs.
                                                                   case1   case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)    5,652,608     1,089,180    7,189,778     27%    560% 
 Average throughput (KB/s)    188,420        36,306      239,659     27%    560%
 elapsed time (sec)            102.90        343.35        87.05    -15%    -75%
 sys time (sec)              2,246.86        213.53     1,864.16    -17%    773%
 memcg_high                   576,104       502,907      642,083                    
 memcg_swap_fail            4,016,117         1,407        1,478                    
 zswpout                   61,163,423        22,444   57,798,716                    
 zswpin                           401           368          454                    
 pswpout                            0    40,862,080            0                    
 pswpin                             0            20            0                    
 thp_swpout                         0             0            0                    
 thp_swpout_fallback                0             0            0                    
 64kB-mthp_swpout_fallback  4,016,117         1,407        1,478                    
 pgmajfault                     3,063         3,153        3,122                    
 swap_ra                           96            93          156                    
 swap_ra_hit                       46            45           83                    
 ZSWPOUT-64kB                     n/a           n/a    3,611,032                    
 SWPOUT-64kB                        0     2,553,880            0                  
 -------------------------------------------------------------------------------


 -------------------------------------------------------------------------------
 2M folios: zstd:
 ================

 zswap compressor                zstd          zstd         zstd      zstd v10
                         before-case1  before-case2        after     vs.    vs.
                                                                   case1  case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)    5,895,500     1,109,694    6,484,224     10%    484%
 Average throughput (KB/s)    196,516        36,989      216,140     10%    484%
 elapsed time (sec)            108.77        334.28       106.33     -2%    -68%
 sys time (sec)              2,657.14         94.88     2,376.13    -11%   2404%
 memcg_high                    64,200        66,316       56,898                  
 memcg_swap_fail              101,182            70           27                  
 zswpout                   48,931,499        36,507   48,890,640                  
 zswpin                           380           379          377                  
 pswpout                            0    40,166,400            0                  
 pswpin                             0             0            0                  
 thp_swpout                         0        78,450            0                  
 thp_swpout_fallback          101,182            70           27                  
 2MB-mthp_swpout_fallback           0             0           27                  
 pgmajfault                     3,067         3,417        3,311                  
 swap_ra                           91            90          854                  
 swap_ra_hit                       45            45          810                  
 ZSWPOUT-2MB                      n/a           n/a       95,459                  
 SWPOUT-2MB                         0        78,450            0                 
 -------------------------------------------------------------------------------


 -------------------------------------------------------------------------------
 2M folios: deflate-iaa:
 =======================

 zswap compressor         deflate-iaa   deflate-iaa  deflate-iaa deflate-iaa v10
                         before-case1  before-case2        after     vs.     vs.
                                                                   case1   case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)   6,286,587      1,126,785    7,073,464     13%    528%
 Average throughput (KB/s)   209,552         37,559      235,782     13%    528%
 elapsed time (sec)            96.19         333.03        85.79    -11%    -74%
 sys time (sec)             2,141.44          99.96     1,826.67    -15%   1727%
 memcg_high                   99,253         64,666       79,718                    
 memcg_swap_fail             129,074             53          165                    
 zswpout                  61,312,794         28,321   56,045,120                    
 zswpin                          383            406          403                    
 pswpout                           0     40,048,128            0                    
 pswpin                            0              0            0                    
 thp_swpout                        0         78,219            0                    
 thp_swpout_fallback         129,074             53          165                    
 2MB-mthp_swpout_fallback          0              0          165                    
 pgmajfault                    3,430          3,077       31,468                    
 swap_ra                          91            103       84,373                    
 swap_ra_hit                      47             46       84,317                    
 ZSWPOUT-2MB                     n/a            n/a      109,229                    
 SWPOUT-2MB                        0         78,219            0                
 -------------------------------------------------------------------------------


And finally, this is a comparison of deflate-iaa vs. zstd with v10 of this
patch-series:

 ---------------------------------------------
                  zswap_store large folios v10
                  Impr w/ deflate-iaa vs. zstd

                       64K folios    2M folios
 ---------------------------------------------
 Throughput (KB/s)            17%           9%
 elapsed time (sec)          -20%         -19%
 sys time (sec)              -27%         -23%
 ---------------------------------------------


Conclusions based on the performance results:
=============================================

 v10 wrt before-case1:
 ---------------------
 We see significant improvements in throughput, elapsed and sys time for
 zstd and deflate-iaa, when comparing before-case1 (THP_SWAP=N) vs. after
 (THP_SWAP=Y) with zswap_store large folios.

 v10 wrt before-case2:
 ---------------------
 We see even more significant improvements in throughput and elapsed time
 for zstd and deflate-iaa, when comparing before-case2 (large-folio-SSD)
 vs. after (large-folio-zswap). The sys time increases with
 large-folio-zswap as expected, due to the CPU compression time
 vs. asynchronous disk write times, as pointed out by Ying and Yosry.
 
 In before-case2, when zswap does not store large folios, only allocations
 and cgroup charging due to 4K folio zswap stores count towards the cgroup
 memory limit. However, in the after scenario, with the introduction of
 zswap_store() of large folios, there is an added component of the zswap
 compressed pool usage from large folio stores from potentially all 30
 processes, that gets counted towards the memory limit. As a result, we see
 higher swapout activity in the "after" data.


Summary:
========
The v10 data presented above shows that zswap_store of large folios
demonstrates good throughput/performance improvements compared to
conventional SSD swap of large folios with a sufficiently large 525G SSD
swap device. Hence, it seems reasonable for zswap_store to support large
folios, so that further performance improvements can be implemented.

In the experimental setup used in this patchset, we have enabled IAA
compress verification to ensure additional hardware data integrity CRC
checks not currently done by the software compressors. We see good
throughput/latency improvements with deflate-iaa vs. zstd with zswap_store
of large folios.

Some of the ideas for further reducing latency that have shown promise in
our experiments, are:

1) IAA compress/decompress batching.
2) Distributing compress jobs across all IAA devices on the socket.

The tests run for this patchset are using only 1 IAA device per core, that
avails of 2 compress engines on the device. In our experiments with IAA
batching, we distribute compress jobs from all cores to the 8 compress
engines available per socket. We further compress the pages in each folio
in parallel in the accelerator. As a result, we improve compress latency
and reclaim throughput.

In decompress batching, we use swapin_readahead to generate a prefetch
batch of 4K folios that we decompress in parallel in IAA.

 ------------------------------------------------------------------------------
                          IAA compress/decompress batching
              Further improvements wrt v10 zswap_store Sequential
                          subpage store using "deflate-iaa":
                       
                      "deflate-iaa" Batching  "deflate-iaa-canned" [2] Batching
                          Additional Impr               Additional Impr   
                     64K folios    2M folios     64K folios    2M folios
 ------------------------------------------------------------------------------
 Throughput (KB/s)          19%          43%           26%           55%
 elapsed time (sec)         -5%         -14%          -10%          -21%
 sys time (sec)              4%          -7%           -4%          -18%
 ------------------------------------------------------------------------------


With zswap IAA compress/decompress batching, we are able to demonstrate
significant performance improvements and memory savings in server
scalability experiments in highly contended system scenarios under
significant memory pressure; as compared to software compressors.  We hope
to submit this work in subsequent patch series.  The current patch-series
is a prequisite for these future submissions.


This patch (of 7):

zswap_store() will store large folios by compressing them page by page.

This patch provides a sequential implementation of storing a large folio
in zswap_store() by iterating through each page in the folio to compress
and store it in the zswap zpool.

zswap_store() calls the newly added zswap_store_page() function for each
page in the folio.  zswap_store_page() handles compressing and storing
each page.

We check the global and per-cgroup limits once at the beginning of
zswap_store(), and only check that the limit is not reached yet.  This is
racy and inaccurate, but it should be sufficient for now.  We also obtain
initial references to the relevant objcg and pool to guarantee that
subsequent references can be acquired by zswap_store_page().  A new
function zswap_pool_get() is added to facilitate this.

If these one-time checks pass, we compress the pages of the folio, while
maintaining a running count of compressed bytes for all the folio's pages.
If all pages are successfully compressed and stored, we do the cgroup
zswap charging with the total compressed bytes, and batch update the
zswap_stored_pages atomic/zswpout event stats with folio_nr_pages() once,
before returning from zswap_store().

If an error is encountered during the store of any page in the folio, all
pages in that folio currently stored in zswap will be invalidated.  Thus,
a folio is either entirely stored in zswap, or entirely not stored in
zswap.

The most important value provided by this patch is it enables swapping out
large folios to zswap without splitting them.  Furthermore, it batches
some operations while doing so (cgroup charging, stats updates).

This patch also forms the basis for building compress batching of pages in
a large folio in zswap_store() by compressing up to say, 8 pages of the
folio in parallel in hardware using the Intel In-Memory Analytics
Accelerator (Intel IAA).

This change reuses and adapts the functionality in Ryan Roberts' RFC
patch [1]:

  "[RFC,v1] mm: zswap: Store large folios without splitting"

  [1] https://lore.kernel.org/linux-mm/20231019110543.3284654-1-ryan.roberts@arm.com/T/#u

Link: https://lkml.kernel.org/r/20241001053222.6944-1-kanchana.p.sridhar@intel.com
Link: https://lkml.kernel.org/r/20241001053222.6944-7-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Originally-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-11 00:26:43 -08:00

1829 lines
51 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* zswap.c - zswap driver file
*
* zswap is a cache that takes pages that are in the process
* of being swapped out and attempts to compress and store them in a
* RAM-based memory pool. This can result in a significant I/O reduction on
* the swap device and, in the case where decompressing from RAM is faster
* than reading from the swap device, can also improve workload performance.
*
* Copyright (C) 2012 Seth Jennings <sjenning@linux.vnet.ibm.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/cpu.h>
#include <linux/highmem.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/atomic.h>
#include <linux/swap.h>
#include <linux/crypto.h>
#include <linux/scatterlist.h>
#include <linux/mempolicy.h>
#include <linux/mempool.h>
#include <linux/zpool.h>
#include <crypto/acompress.h>
#include <linux/zswap.h>
#include <linux/mm_types.h>
#include <linux/page-flags.h>
#include <linux/swapops.h>
#include <linux/writeback.h>
#include <linux/pagemap.h>
#include <linux/workqueue.h>
#include <linux/list_lru.h>
#include "swap.h"
#include "internal.h"
/*********************************
* statistics
**********************************/
/* The number of compressed pages currently stored in zswap */
atomic_long_t zswap_stored_pages = ATOMIC_INIT(0);
/*
* The statistics below are not protected from concurrent access for
* performance reasons so they may not be a 100% accurate. However,
* they do provide useful information on roughly how many times a
* certain event is occurring.
*/
/* Pool limit was hit (see zswap_max_pool_percent) */
static u64 zswap_pool_limit_hit;
/* Pages written back when pool limit was reached */
static u64 zswap_written_back_pages;
/* Store failed due to a reclaim failure after pool limit was reached */
static u64 zswap_reject_reclaim_fail;
/* Store failed due to compression algorithm failure */
static u64 zswap_reject_compress_fail;
/* Compressed page was too big for the allocator to (optimally) store */
static u64 zswap_reject_compress_poor;
/* Store failed because underlying allocator could not get memory */
static u64 zswap_reject_alloc_fail;
/* Store failed because the entry metadata could not be allocated (rare) */
static u64 zswap_reject_kmemcache_fail;
/* Shrinker work queue */
static struct workqueue_struct *shrink_wq;
/* Pool limit was hit, we need to calm down */
static bool zswap_pool_reached_full;
/*********************************
* tunables
**********************************/
#define ZSWAP_PARAM_UNSET ""
static int zswap_setup(void);
/* Enable/disable zswap */
static DEFINE_STATIC_KEY_MAYBE(CONFIG_ZSWAP_DEFAULT_ON, zswap_ever_enabled);
static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON);
static int zswap_enabled_param_set(const char *,
const struct kernel_param *);
static const struct kernel_param_ops zswap_enabled_param_ops = {
.set = zswap_enabled_param_set,
.get = param_get_bool,
};
module_param_cb(enabled, &zswap_enabled_param_ops, &zswap_enabled, 0644);
/* Crypto compressor to use */
static char *zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT;
static int zswap_compressor_param_set(const char *,
const struct kernel_param *);
static const struct kernel_param_ops zswap_compressor_param_ops = {
.set = zswap_compressor_param_set,
.get = param_get_charp,
.free = param_free_charp,
};
module_param_cb(compressor, &zswap_compressor_param_ops,
&zswap_compressor, 0644);
/* Compressed storage zpool to use */
static char *zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT;
static int zswap_zpool_param_set(const char *, const struct kernel_param *);
static const struct kernel_param_ops zswap_zpool_param_ops = {
.set = zswap_zpool_param_set,
.get = param_get_charp,
.free = param_free_charp,
};
module_param_cb(zpool, &zswap_zpool_param_ops, &zswap_zpool_type, 0644);
/* The maximum percentage of memory that the compressed pool can occupy */
static unsigned int zswap_max_pool_percent = 20;
module_param_named(max_pool_percent, zswap_max_pool_percent, uint, 0644);
/* The threshold for accepting new pages after the max_pool_percent was hit */
static unsigned int zswap_accept_thr_percent = 90; /* of max pool size */
module_param_named(accept_threshold_percent, zswap_accept_thr_percent,
uint, 0644);
/* Enable/disable memory pressure-based shrinker. */
static bool zswap_shrinker_enabled = IS_ENABLED(
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON);
module_param_named(shrinker_enabled, zswap_shrinker_enabled, bool, 0644);
bool zswap_is_enabled(void)
{
return zswap_enabled;
}
bool zswap_never_enabled(void)
{
return !static_branch_maybe(CONFIG_ZSWAP_DEFAULT_ON, &zswap_ever_enabled);
}
/*********************************
* data structures
**********************************/
struct crypto_acomp_ctx {
struct crypto_acomp *acomp;
struct acomp_req *req;
struct crypto_wait wait;
u8 *buffer;
struct mutex mutex;
bool is_sleepable;
};
/*
* The lock ordering is zswap_tree.lock -> zswap_pool.lru_lock.
* The only case where lru_lock is not acquired while holding tree.lock is
* when a zswap_entry is taken off the lru for writeback, in that case it
* needs to be verified that it's still valid in the tree.
*/
struct zswap_pool {
struct zpool *zpool;
struct crypto_acomp_ctx __percpu *acomp_ctx;
struct percpu_ref ref;
struct list_head list;
struct work_struct release_work;
struct hlist_node node;
char tfm_name[CRYPTO_MAX_ALG_NAME];
};
/* Global LRU lists shared by all zswap pools. */
static struct list_lru zswap_list_lru;
/* The lock protects zswap_next_shrink updates. */
static DEFINE_SPINLOCK(zswap_shrink_lock);
static struct mem_cgroup *zswap_next_shrink;
static struct work_struct zswap_shrink_work;
static struct shrinker *zswap_shrinker;
/*
* struct zswap_entry
*
* This structure contains the metadata for tracking a single compressed
* page within zswap.
*
* swpentry - associated swap entry, the offset indexes into the red-black tree
* length - the length in bytes of the compressed page data. Needed during
* decompression.
* referenced - true if the entry recently entered the zswap pool. Unset by the
* writeback logic. The entry is only reclaimed by the writeback
* logic if referenced is unset. See comments in the shrinker
* section for context.
* pool - the zswap_pool the entry's data is in
* handle - zpool allocation handle that stores the compressed page data
* objcg - the obj_cgroup that the compressed memory is charged to
* lru - handle to the pool's lru used to evict pages.
*/
struct zswap_entry {
swp_entry_t swpentry;
unsigned int length;
bool referenced;
struct zswap_pool *pool;
unsigned long handle;
struct obj_cgroup *objcg;
struct list_head lru;
};
static struct xarray *zswap_trees[MAX_SWAPFILES];
static unsigned int nr_zswap_trees[MAX_SWAPFILES];
/* RCU-protected iteration */
static LIST_HEAD(zswap_pools);
/* protects zswap_pools list modification */
static DEFINE_SPINLOCK(zswap_pools_lock);
/* pool counter to provide unique names to zpool */
static atomic_t zswap_pools_count = ATOMIC_INIT(0);
enum zswap_init_type {
ZSWAP_UNINIT,
ZSWAP_INIT_SUCCEED,
ZSWAP_INIT_FAILED
};
static enum zswap_init_type zswap_init_state;
/* used to ensure the integrity of initialization */
static DEFINE_MUTEX(zswap_init_lock);
/* init completed, but couldn't create the initial pool */
static bool zswap_has_pool;
/*********************************
* helpers and fwd declarations
**********************************/
static inline struct xarray *swap_zswap_tree(swp_entry_t swp)
{
return &zswap_trees[swp_type(swp)][swp_offset(swp)
>> SWAP_ADDRESS_SPACE_SHIFT];
}
#define zswap_pool_debug(msg, p) \
pr_debug("%s pool %s/%s\n", msg, (p)->tfm_name, \
zpool_get_type((p)->zpool))
/*********************************
* pool functions
**********************************/
static void __zswap_pool_empty(struct percpu_ref *ref);
static struct zswap_pool *zswap_pool_create(char *type, char *compressor)
{
struct zswap_pool *pool;
char name[38]; /* 'zswap' + 32 char (max) num + \0 */
gfp_t gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM;
int ret;
if (!zswap_has_pool) {
/* if either are unset, pool initialization failed, and we
* need both params to be set correctly before trying to
* create a pool.
*/
if (!strcmp(type, ZSWAP_PARAM_UNSET))
return NULL;
if (!strcmp(compressor, ZSWAP_PARAM_UNSET))
return NULL;
}
pool = kzalloc(sizeof(*pool), GFP_KERNEL);
if (!pool)
return NULL;
/* unique name for each pool specifically required by zsmalloc */
snprintf(name, 38, "zswap%x", atomic_inc_return(&zswap_pools_count));
pool->zpool = zpool_create_pool(type, name, gfp);
if (!pool->zpool) {
pr_err("%s zpool not available\n", type);
goto error;
}
pr_debug("using %s zpool\n", zpool_get_type(pool->zpool));
strscpy(pool->tfm_name, compressor, sizeof(pool->tfm_name));
pool->acomp_ctx = alloc_percpu(*pool->acomp_ctx);
if (!pool->acomp_ctx) {
pr_err("percpu alloc failed\n");
goto error;
}
ret = cpuhp_state_add_instance(CPUHP_MM_ZSWP_POOL_PREPARE,
&pool->node);
if (ret)
goto error;
/* being the current pool takes 1 ref; this func expects the
* caller to always add the new pool as the current pool
*/
ret = percpu_ref_init(&pool->ref, __zswap_pool_empty,
PERCPU_REF_ALLOW_REINIT, GFP_KERNEL);
if (ret)
goto ref_fail;
INIT_LIST_HEAD(&pool->list);
zswap_pool_debug("created", pool);
return pool;
ref_fail:
cpuhp_state_remove_instance(CPUHP_MM_ZSWP_POOL_PREPARE, &pool->node);
error:
if (pool->acomp_ctx)
free_percpu(pool->acomp_ctx);
if (pool->zpool)
zpool_destroy_pool(pool->zpool);
kfree(pool);
return NULL;
}
static struct zswap_pool *__zswap_pool_create_fallback(void)
{
bool has_comp, has_zpool;
has_comp = crypto_has_acomp(zswap_compressor, 0, 0);
if (!has_comp && strcmp(zswap_compressor,
CONFIG_ZSWAP_COMPRESSOR_DEFAULT)) {
pr_err("compressor %s not available, using default %s\n",
zswap_compressor, CONFIG_ZSWAP_COMPRESSOR_DEFAULT);
param_free_charp(&zswap_compressor);
zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT;
has_comp = crypto_has_acomp(zswap_compressor, 0, 0);
}
if (!has_comp) {
pr_err("default compressor %s not available\n",
zswap_compressor);
param_free_charp(&zswap_compressor);
zswap_compressor = ZSWAP_PARAM_UNSET;
}
has_zpool = zpool_has_pool(zswap_zpool_type);
if (!has_zpool && strcmp(zswap_zpool_type,
CONFIG_ZSWAP_ZPOOL_DEFAULT)) {
pr_err("zpool %s not available, using default %s\n",
zswap_zpool_type, CONFIG_ZSWAP_ZPOOL_DEFAULT);
param_free_charp(&zswap_zpool_type);
zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT;
has_zpool = zpool_has_pool(zswap_zpool_type);
}
if (!has_zpool) {
pr_err("default zpool %s not available\n",
zswap_zpool_type);
param_free_charp(&zswap_zpool_type);
zswap_zpool_type = ZSWAP_PARAM_UNSET;
}
if (!has_comp || !has_zpool)
return NULL;
return zswap_pool_create(zswap_zpool_type, zswap_compressor);
}
static void zswap_pool_destroy(struct zswap_pool *pool)
{
zswap_pool_debug("destroying", pool);
cpuhp_state_remove_instance(CPUHP_MM_ZSWP_POOL_PREPARE, &pool->node);
free_percpu(pool->acomp_ctx);
zpool_destroy_pool(pool->zpool);
kfree(pool);
}
static void __zswap_pool_release(struct work_struct *work)
{
struct zswap_pool *pool = container_of(work, typeof(*pool),
release_work);
synchronize_rcu();
/* nobody should have been able to get a ref... */
WARN_ON(!percpu_ref_is_zero(&pool->ref));
percpu_ref_exit(&pool->ref);
/* pool is now off zswap_pools list and has no references. */
zswap_pool_destroy(pool);
}
static struct zswap_pool *zswap_pool_current(void);
static void __zswap_pool_empty(struct percpu_ref *ref)
{
struct zswap_pool *pool;
pool = container_of(ref, typeof(*pool), ref);
spin_lock_bh(&zswap_pools_lock);
WARN_ON(pool == zswap_pool_current());
list_del_rcu(&pool->list);
INIT_WORK(&pool->release_work, __zswap_pool_release);
schedule_work(&pool->release_work);
spin_unlock_bh(&zswap_pools_lock);
}
static int __must_check zswap_pool_tryget(struct zswap_pool *pool)
{
if (!pool)
return 0;
return percpu_ref_tryget(&pool->ref);
}
/* The caller must already have a reference. */
static void zswap_pool_get(struct zswap_pool *pool)
{
percpu_ref_get(&pool->ref);
}
static void zswap_pool_put(struct zswap_pool *pool)
{
percpu_ref_put(&pool->ref);
}
static struct zswap_pool *__zswap_pool_current(void)
{
struct zswap_pool *pool;
pool = list_first_or_null_rcu(&zswap_pools, typeof(*pool), list);
WARN_ONCE(!pool && zswap_has_pool,
"%s: no page storage pool!\n", __func__);
return pool;
}
static struct zswap_pool *zswap_pool_current(void)
{
assert_spin_locked(&zswap_pools_lock);
return __zswap_pool_current();
}
static struct zswap_pool *zswap_pool_current_get(void)
{
struct zswap_pool *pool;
rcu_read_lock();
pool = __zswap_pool_current();
if (!zswap_pool_tryget(pool))
pool = NULL;
rcu_read_unlock();
return pool;
}
/* type and compressor must be null-terminated */
static struct zswap_pool *zswap_pool_find_get(char *type, char *compressor)
{
struct zswap_pool *pool;
assert_spin_locked(&zswap_pools_lock);
list_for_each_entry_rcu(pool, &zswap_pools, list) {
if (strcmp(pool->tfm_name, compressor))
continue;
if (strcmp(zpool_get_type(pool->zpool), type))
continue;
/* if we can't get it, it's about to be destroyed */
if (!zswap_pool_tryget(pool))
continue;
return pool;
}
return NULL;
}
static unsigned long zswap_max_pages(void)
{
return totalram_pages() * zswap_max_pool_percent / 100;
}
static unsigned long zswap_accept_thr_pages(void)
{
return zswap_max_pages() * zswap_accept_thr_percent / 100;
}
unsigned long zswap_total_pages(void)
{
struct zswap_pool *pool;
unsigned long total = 0;
rcu_read_lock();
list_for_each_entry_rcu(pool, &zswap_pools, list)
total += zpool_get_total_pages(pool->zpool);
rcu_read_unlock();
return total;
}
static bool zswap_check_limits(void)
{
unsigned long cur_pages = zswap_total_pages();
unsigned long max_pages = zswap_max_pages();
if (cur_pages >= max_pages) {
zswap_pool_limit_hit++;
zswap_pool_reached_full = true;
} else if (zswap_pool_reached_full &&
cur_pages <= zswap_accept_thr_pages()) {
zswap_pool_reached_full = false;
}
return zswap_pool_reached_full;
}
/*********************************
* param callbacks
**********************************/
static bool zswap_pool_changed(const char *s, const struct kernel_param *kp)
{
/* no change required */
if (!strcmp(s, *(char **)kp->arg) && zswap_has_pool)
return false;
return true;
}
/* val must be a null-terminated string */
static int __zswap_param_set(const char *val, const struct kernel_param *kp,
char *type, char *compressor)
{
struct zswap_pool *pool, *put_pool = NULL;
char *s = strstrip((char *)val);
int ret = 0;
bool new_pool = false;
mutex_lock(&zswap_init_lock);
switch (zswap_init_state) {
case ZSWAP_UNINIT:
/* if this is load-time (pre-init) param setting,
* don't create a pool; that's done during init.
*/
ret = param_set_charp(s, kp);
break;
case ZSWAP_INIT_SUCCEED:
new_pool = zswap_pool_changed(s, kp);
break;
case ZSWAP_INIT_FAILED:
pr_err("can't set param, initialization failed\n");
ret = -ENODEV;
}
mutex_unlock(&zswap_init_lock);
/* no need to create a new pool, return directly */
if (!new_pool)
return ret;
if (!type) {
if (!zpool_has_pool(s)) {
pr_err("zpool %s not available\n", s);
return -ENOENT;
}
type = s;
} else if (!compressor) {
if (!crypto_has_acomp(s, 0, 0)) {
pr_err("compressor %s not available\n", s);
return -ENOENT;
}
compressor = s;
} else {
WARN_ON(1);
return -EINVAL;
}
spin_lock_bh(&zswap_pools_lock);
pool = zswap_pool_find_get(type, compressor);
if (pool) {
zswap_pool_debug("using existing", pool);
WARN_ON(pool == zswap_pool_current());
list_del_rcu(&pool->list);
}
spin_unlock_bh(&zswap_pools_lock);
if (!pool)
pool = zswap_pool_create(type, compressor);
else {
/*
* Restore the initial ref dropped by percpu_ref_kill()
* when the pool was decommissioned and switch it again
* to percpu mode.
*/
percpu_ref_resurrect(&pool->ref);
/* Drop the ref from zswap_pool_find_get(). */
zswap_pool_put(pool);
}
if (pool)
ret = param_set_charp(s, kp);
else
ret = -EINVAL;
spin_lock_bh(&zswap_pools_lock);
if (!ret) {
put_pool = zswap_pool_current();
list_add_rcu(&pool->list, &zswap_pools);
zswap_has_pool = true;
} else if (pool) {
/* add the possibly pre-existing pool to the end of the pools
* list; if it's new (and empty) then it'll be removed and
* destroyed by the put after we drop the lock
*/
list_add_tail_rcu(&pool->list, &zswap_pools);
put_pool = pool;
}
spin_unlock_bh(&zswap_pools_lock);
if (!zswap_has_pool && !pool) {
/* if initial pool creation failed, and this pool creation also
* failed, maybe both compressor and zpool params were bad.
* Allow changing this param, so pool creation will succeed
* when the other param is changed. We already verified this
* param is ok in the zpool_has_pool() or crypto_has_acomp()
* checks above.
*/
ret = param_set_charp(s, kp);
}
/* drop the ref from either the old current pool,
* or the new pool we failed to add
*/
if (put_pool)
percpu_ref_kill(&put_pool->ref);
return ret;
}
static int zswap_compressor_param_set(const char *val,
const struct kernel_param *kp)
{
return __zswap_param_set(val, kp, zswap_zpool_type, NULL);
}
static int zswap_zpool_param_set(const char *val,
const struct kernel_param *kp)
{
return __zswap_param_set(val, kp, NULL, zswap_compressor);
}
static int zswap_enabled_param_set(const char *val,
const struct kernel_param *kp)
{
int ret = -ENODEV;
/* if this is load-time (pre-init) param setting, only set param. */
if (system_state != SYSTEM_RUNNING)
return param_set_bool(val, kp);
mutex_lock(&zswap_init_lock);
switch (zswap_init_state) {
case ZSWAP_UNINIT:
if (zswap_setup())
break;
fallthrough;
case ZSWAP_INIT_SUCCEED:
if (!zswap_has_pool)
pr_err("can't enable, no pool configured\n");
else
ret = param_set_bool(val, kp);
break;
case ZSWAP_INIT_FAILED:
pr_err("can't enable, initialization failed\n");
}
mutex_unlock(&zswap_init_lock);
return ret;
}
/*********************************
* lru functions
**********************************/
/* should be called under RCU */
#ifdef CONFIG_MEMCG
static inline struct mem_cgroup *mem_cgroup_from_entry(struct zswap_entry *entry)
{
return entry->objcg ? obj_cgroup_memcg(entry->objcg) : NULL;
}
#else
static inline struct mem_cgroup *mem_cgroup_from_entry(struct zswap_entry *entry)
{
return NULL;
}
#endif
static inline int entry_to_nid(struct zswap_entry *entry)
{
return page_to_nid(virt_to_page(entry));
}
static void zswap_lru_add(struct list_lru *list_lru, struct zswap_entry *entry)
{
int nid = entry_to_nid(entry);
struct mem_cgroup *memcg;
/*
* Note that it is safe to use rcu_read_lock() here, even in the face of
* concurrent memcg offlining. Thanks to the memcg->kmemcg_id indirection
* used in list_lru lookup, only two scenarios are possible:
*
* 1. list_lru_add() is called before memcg->kmemcg_id is updated. The
* new entry will be reparented to memcg's parent's list_lru.
* 2. list_lru_add() is called after memcg->kmemcg_id is updated. The
* new entry will be added directly to memcg's parent's list_lru.
*
* Similar reasoning holds for list_lru_del().
*/
rcu_read_lock();
memcg = mem_cgroup_from_entry(entry);
/* will always succeed */
list_lru_add(list_lru, &entry->lru, nid, memcg);
rcu_read_unlock();
}
static void zswap_lru_del(struct list_lru *list_lru, struct zswap_entry *entry)
{
int nid = entry_to_nid(entry);
struct mem_cgroup *memcg;
rcu_read_lock();
memcg = mem_cgroup_from_entry(entry);
/* will always succeed */
list_lru_del(list_lru, &entry->lru, nid, memcg);
rcu_read_unlock();
}
void zswap_lruvec_state_init(struct lruvec *lruvec)
{
atomic_long_set(&lruvec->zswap_lruvec_state.nr_disk_swapins, 0);
}
void zswap_folio_swapin(struct folio *folio)
{
struct lruvec *lruvec;
if (folio) {
lruvec = folio_lruvec(folio);
atomic_long_inc(&lruvec->zswap_lruvec_state.nr_disk_swapins);
}
}
/*
* This function should be called when a memcg is being offlined.
*
* Since the global shrinker shrink_worker() may hold a reference
* of the memcg, we must check and release the reference in
* zswap_next_shrink.
*
* shrink_worker() must handle the case where this function releases
* the reference of memcg being shrunk.
*/
void zswap_memcg_offline_cleanup(struct mem_cgroup *memcg)
{
/* lock out zswap shrinker walking memcg tree */
spin_lock(&zswap_shrink_lock);
if (zswap_next_shrink == memcg) {
do {
zswap_next_shrink = mem_cgroup_iter(NULL, zswap_next_shrink, NULL);
} while (zswap_next_shrink && !mem_cgroup_online(zswap_next_shrink));
}
spin_unlock(&zswap_shrink_lock);
}
/*********************************
* zswap entry functions
**********************************/
static struct kmem_cache *zswap_entry_cache;
static struct zswap_entry *zswap_entry_cache_alloc(gfp_t gfp, int nid)
{
struct zswap_entry *entry;
entry = kmem_cache_alloc_node(zswap_entry_cache, gfp, nid);
if (!entry)
return NULL;
return entry;
}
static void zswap_entry_cache_free(struct zswap_entry *entry)
{
kmem_cache_free(zswap_entry_cache, entry);
}
/*
* Carries out the common pattern of freeing and entry's zpool allocation,
* freeing the entry itself, and decrementing the number of stored pages.
*/
static void zswap_entry_free(struct zswap_entry *entry)
{
zswap_lru_del(&zswap_list_lru, entry);
zpool_free(entry->pool->zpool, entry->handle);
zswap_pool_put(entry->pool);
if (entry->objcg) {
obj_cgroup_uncharge_zswap(entry->objcg, entry->length);
obj_cgroup_put(entry->objcg);
}
zswap_entry_cache_free(entry);
atomic_long_dec(&zswap_stored_pages);
}
/*********************************
* compressed storage functions
**********************************/
static int zswap_cpu_comp_prepare(unsigned int cpu, struct hlist_node *node)
{
struct zswap_pool *pool = hlist_entry(node, struct zswap_pool, node);
struct crypto_acomp_ctx *acomp_ctx = per_cpu_ptr(pool->acomp_ctx, cpu);
struct crypto_acomp *acomp;
struct acomp_req *req;
int ret;
mutex_init(&acomp_ctx->mutex);
acomp_ctx->buffer = kmalloc_node(PAGE_SIZE * 2, GFP_KERNEL, cpu_to_node(cpu));
if (!acomp_ctx->buffer)
return -ENOMEM;
acomp = crypto_alloc_acomp_node(pool->tfm_name, 0, 0, cpu_to_node(cpu));
if (IS_ERR(acomp)) {
pr_err("could not alloc crypto acomp %s : %ld\n",
pool->tfm_name, PTR_ERR(acomp));
ret = PTR_ERR(acomp);
goto acomp_fail;
}
acomp_ctx->acomp = acomp;
acomp_ctx->is_sleepable = acomp_is_async(acomp);
req = acomp_request_alloc(acomp_ctx->acomp);
if (!req) {
pr_err("could not alloc crypto acomp_request %s\n",
pool->tfm_name);
ret = -ENOMEM;
goto req_fail;
}
acomp_ctx->req = req;
crypto_init_wait(&acomp_ctx->wait);
/*
* if the backend of acomp is async zip, crypto_req_done() will wakeup
* crypto_wait_req(); if the backend of acomp is scomp, the callback
* won't be called, crypto_wait_req() will return without blocking.
*/
acomp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &acomp_ctx->wait);
return 0;
req_fail:
crypto_free_acomp(acomp_ctx->acomp);
acomp_fail:
kfree(acomp_ctx->buffer);
return ret;
}
static int zswap_cpu_comp_dead(unsigned int cpu, struct hlist_node *node)
{
struct zswap_pool *pool = hlist_entry(node, struct zswap_pool, node);
struct crypto_acomp_ctx *acomp_ctx = per_cpu_ptr(pool->acomp_ctx, cpu);
if (!IS_ERR_OR_NULL(acomp_ctx)) {
if (!IS_ERR_OR_NULL(acomp_ctx->req))
acomp_request_free(acomp_ctx->req);
if (!IS_ERR_OR_NULL(acomp_ctx->acomp))
crypto_free_acomp(acomp_ctx->acomp);
kfree(acomp_ctx->buffer);
}
return 0;
}
static bool zswap_compress(struct page *page, struct zswap_entry *entry)
{
struct crypto_acomp_ctx *acomp_ctx;
struct scatterlist input, output;
int comp_ret = 0, alloc_ret = 0;
unsigned int dlen = PAGE_SIZE;
unsigned long handle;
struct zpool *zpool;
char *buf;
gfp_t gfp;
u8 *dst;
acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx);
mutex_lock(&acomp_ctx->mutex);
dst = acomp_ctx->buffer;
sg_init_table(&input, 1);
sg_set_page(&input, page, PAGE_SIZE, 0);
/*
* We need PAGE_SIZE * 2 here since there maybe over-compression case,
* and hardware-accelerators may won't check the dst buffer size, so
* giving the dst buffer with enough length to avoid buffer overflow.
*/
sg_init_one(&output, dst, PAGE_SIZE * 2);
acomp_request_set_params(acomp_ctx->req, &input, &output, PAGE_SIZE, dlen);
/*
* it maybe looks a little bit silly that we send an asynchronous request,
* then wait for its completion synchronously. This makes the process look
* synchronous in fact.
* Theoretically, acomp supports users send multiple acomp requests in one
* acomp instance, then get those requests done simultaneously. but in this
* case, zswap actually does store and load page by page, there is no
* existing method to send the second page before the first page is done
* in one thread doing zwap.
* but in different threads running on different cpu, we have different
* acomp instance, so multiple threads can do (de)compression in parallel.
*/
comp_ret = crypto_wait_req(crypto_acomp_compress(acomp_ctx->req), &acomp_ctx->wait);
dlen = acomp_ctx->req->dlen;
if (comp_ret)
goto unlock;
zpool = entry->pool->zpool;
gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM;
if (zpool_malloc_support_movable(zpool))
gfp |= __GFP_HIGHMEM | __GFP_MOVABLE;
alloc_ret = zpool_malloc(zpool, dlen, gfp, &handle);
if (alloc_ret)
goto unlock;
buf = zpool_map_handle(zpool, handle, ZPOOL_MM_WO);
memcpy(buf, dst, dlen);
zpool_unmap_handle(zpool, handle);
entry->handle = handle;
entry->length = dlen;
unlock:
if (comp_ret == -ENOSPC || alloc_ret == -ENOSPC)
zswap_reject_compress_poor++;
else if (comp_ret)
zswap_reject_compress_fail++;
else if (alloc_ret)
zswap_reject_alloc_fail++;
mutex_unlock(&acomp_ctx->mutex);
return comp_ret == 0 && alloc_ret == 0;
}
static void zswap_decompress(struct zswap_entry *entry, struct folio *folio)
{
struct zpool *zpool = entry->pool->zpool;
struct scatterlist input, output;
struct crypto_acomp_ctx *acomp_ctx;
u8 *src;
acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx);
mutex_lock(&acomp_ctx->mutex);
src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);
/*
* If zpool_map_handle is atomic, we cannot reliably utilize its mapped buffer
* to do crypto_acomp_decompress() which might sleep. In such cases, we must
* resort to copying the buffer to a temporary one.
* Meanwhile, zpool_map_handle() might return a non-linearly mapped buffer,
* such as a kmap address of high memory or even ever a vmap address.
* However, sg_init_one is only equipped to handle linearly mapped low memory.
* In such cases, we also must copy the buffer to a temporary and lowmem one.
*/
if ((acomp_ctx->is_sleepable && !zpool_can_sleep_mapped(zpool)) ||
!virt_addr_valid(src)) {
memcpy(acomp_ctx->buffer, src, entry->length);
src = acomp_ctx->buffer;
zpool_unmap_handle(zpool, entry->handle);
}
sg_init_one(&input, src, entry->length);
sg_init_table(&output, 1);
sg_set_folio(&output, folio, PAGE_SIZE, 0);
acomp_request_set_params(acomp_ctx->req, &input, &output, entry->length, PAGE_SIZE);
BUG_ON(crypto_wait_req(crypto_acomp_decompress(acomp_ctx->req), &acomp_ctx->wait));
BUG_ON(acomp_ctx->req->dlen != PAGE_SIZE);
mutex_unlock(&acomp_ctx->mutex);
if (src != acomp_ctx->buffer)
zpool_unmap_handle(zpool, entry->handle);
}
/*********************************
* writeback code
**********************************/
/*
* Attempts to free an entry by adding a folio to the swap cache,
* decompressing the entry data into the folio, and issuing a
* bio write to write the folio back to the swap device.
*
* This can be thought of as a "resumed writeback" of the folio
* to the swap device. We are basically resuming the same swap
* writeback path that was intercepted with the zswap_store()
* in the first place. After the folio has been decompressed into
* the swap cache, the compressed version stored by zswap can be
* freed.
*/
static int zswap_writeback_entry(struct zswap_entry *entry,
swp_entry_t swpentry)
{
struct xarray *tree;
pgoff_t offset = swp_offset(swpentry);
struct folio *folio;
struct mempolicy *mpol;
bool folio_was_allocated;
struct writeback_control wbc = {
.sync_mode = WB_SYNC_NONE,
};
/* try to allocate swap cache folio */
mpol = get_task_policy(current);
folio = __read_swap_cache_async(swpentry, GFP_KERNEL, mpol,
NO_INTERLEAVE_INDEX, &folio_was_allocated, true);
if (!folio)
return -ENOMEM;
/*
* Found an existing folio, we raced with swapin or concurrent
* shrinker. We generally writeback cold folios from zswap, and
* swapin means the folio just became hot, so skip this folio.
* For unlikely concurrent shrinker case, it will be unlinked
* and freed when invalidated by the concurrent shrinker anyway.
*/
if (!folio_was_allocated) {
folio_put(folio);
return -EEXIST;
}
/*
* folio is locked, and the swapcache is now secured against
* concurrent swapping to and from the slot, and concurrent
* swapoff so we can safely dereference the zswap tree here.
* Verify that the swap entry hasn't been invalidated and recycled
* behind our backs, to avoid overwriting a new swap folio with
* old compressed data. Only when this is successful can the entry
* be dereferenced.
*/
tree = swap_zswap_tree(swpentry);
if (entry != xa_cmpxchg(tree, offset, entry, NULL, GFP_KERNEL)) {
delete_from_swap_cache(folio);
folio_unlock(folio);
folio_put(folio);
return -ENOMEM;
}
zswap_decompress(entry, folio);
count_vm_event(ZSWPWB);
if (entry->objcg)
count_objcg_events(entry->objcg, ZSWPWB, 1);
zswap_entry_free(entry);
/* folio is up to date */
folio_mark_uptodate(folio);
/* move it to the tail of the inactive list after end_writeback */
folio_set_reclaim(folio);
/* start writeback */
__swap_writepage(folio, &wbc);
folio_put(folio);
return 0;
}
/*********************************
* shrinker functions
**********************************/
/*
* The dynamic shrinker is modulated by the following factors:
*
* 1. Each zswap entry has a referenced bit, which the shrinker unsets (giving
* the entry a second chance) before rotating it in the LRU list. If the
* entry is considered again by the shrinker, with its referenced bit unset,
* it is written back. The writeback rate as a result is dynamically
* adjusted by the pool activities - if the pool is dominated by new entries
* (i.e lots of recent zswapouts), these entries will be protected and
* the writeback rate will slow down. On the other hand, if the pool has a
* lot of stagnant entries, these entries will be reclaimed immediately,
* effectively increasing the writeback rate.
*
* 2. Swapins counter: If we observe swapins, it is a sign that we are
* overshrinking and should slow down. We maintain a swapins counter, which
* is consumed and subtract from the number of eligible objects on the LRU
* in zswap_shrinker_count().
*
* 3. Compression ratio. The better the workload compresses, the less gains we
* can expect from writeback. We scale down the number of objects available
* for reclaim by this ratio.
*/
static enum lru_status shrink_memcg_cb(struct list_head *item, struct list_lru_one *l,
spinlock_t *lock, void *arg)
{
struct zswap_entry *entry = container_of(item, struct zswap_entry, lru);
bool *encountered_page_in_swapcache = (bool *)arg;
swp_entry_t swpentry;
enum lru_status ret = LRU_REMOVED_RETRY;
int writeback_result;
/*
* Second chance algorithm: if the entry has its referenced bit set, give it
* a second chance. Only clear the referenced bit and rotate it in the
* zswap's LRU list.
*/
if (entry->referenced) {
entry->referenced = false;
return LRU_ROTATE;
}
/*
* As soon as we drop the LRU lock, the entry can be freed by
* a concurrent invalidation. This means the following:
*
* 1. We extract the swp_entry_t to the stack, allowing
* zswap_writeback_entry() to pin the swap entry and
* then validate the zwap entry against that swap entry's
* tree using pointer value comparison. Only when that
* is successful can the entry be dereferenced.
*
* 2. Usually, objects are taken off the LRU for reclaim. In
* this case this isn't possible, because if reclaim fails
* for whatever reason, we have no means of knowing if the
* entry is alive to put it back on the LRU.
*
* So rotate it before dropping the lock. If the entry is
* written back or invalidated, the free path will unlink
* it. For failures, rotation is the right thing as well.
*
* Temporary failures, where the same entry should be tried
* again immediately, almost never happen for this shrinker.
* We don't do any trylocking; -ENOMEM comes closest,
* but that's extremely rare and doesn't happen spuriously
* either. Don't bother distinguishing this case.
*/
list_move_tail(item, &l->list);
/*
* Once the lru lock is dropped, the entry might get freed. The
* swpentry is copied to the stack, and entry isn't deref'd again
* until the entry is verified to still be alive in the tree.
*/
swpentry = entry->swpentry;
/*
* It's safe to drop the lock here because we return either
* LRU_REMOVED_RETRY or LRU_RETRY.
*/
spin_unlock(lock);
writeback_result = zswap_writeback_entry(entry, swpentry);
if (writeback_result) {
zswap_reject_reclaim_fail++;
ret = LRU_RETRY;
/*
* Encountering a page already in swap cache is a sign that we are shrinking
* into the warmer region. We should terminate shrinking (if we're in the dynamic
* shrinker context).
*/
if (writeback_result == -EEXIST && encountered_page_in_swapcache) {
ret = LRU_STOP;
*encountered_page_in_swapcache = true;
}
} else {
zswap_written_back_pages++;
}
spin_lock(lock);
return ret;
}
static unsigned long zswap_shrinker_scan(struct shrinker *shrinker,
struct shrink_control *sc)
{
unsigned long shrink_ret;
bool encountered_page_in_swapcache = false;
if (!zswap_shrinker_enabled ||
!mem_cgroup_zswap_writeback_enabled(sc->memcg)) {
sc->nr_scanned = 0;
return SHRINK_STOP;
}
shrink_ret = list_lru_shrink_walk(&zswap_list_lru, sc, &shrink_memcg_cb,
&encountered_page_in_swapcache);
if (encountered_page_in_swapcache)
return SHRINK_STOP;
return shrink_ret ? shrink_ret : SHRINK_STOP;
}
static unsigned long zswap_shrinker_count(struct shrinker *shrinker,
struct shrink_control *sc)
{
struct mem_cgroup *memcg = sc->memcg;
struct lruvec *lruvec = mem_cgroup_lruvec(memcg, NODE_DATA(sc->nid));
atomic_long_t *nr_disk_swapins =
&lruvec->zswap_lruvec_state.nr_disk_swapins;
unsigned long nr_backing, nr_stored, nr_freeable, nr_disk_swapins_cur,
nr_remain;
if (!zswap_shrinker_enabled || !mem_cgroup_zswap_writeback_enabled(memcg))
return 0;
/*
* The shrinker resumes swap writeback, which will enter block
* and may enter fs. XXX: Harmonize with vmscan.c __GFP_FS
* rules (may_enter_fs()), which apply on a per-folio basis.
*/
if (!gfp_has_io_fs(sc->gfp_mask))
return 0;
/*
* For memcg, use the cgroup-wide ZSWAP stats since we don't
* have them per-node and thus per-lruvec. Careful if memcg is
* runtime-disabled: we can get sc->memcg == NULL, which is ok
* for the lruvec, but not for memcg_page_state().
*
* Without memcg, use the zswap pool-wide metrics.
*/
if (!mem_cgroup_disabled()) {
mem_cgroup_flush_stats(memcg);
nr_backing = memcg_page_state(memcg, MEMCG_ZSWAP_B) >> PAGE_SHIFT;
nr_stored = memcg_page_state(memcg, MEMCG_ZSWAPPED);
} else {
nr_backing = zswap_total_pages();
nr_stored = atomic_long_read(&zswap_stored_pages);
}
if (!nr_stored)
return 0;
nr_freeable = list_lru_shrink_count(&zswap_list_lru, sc);
if (!nr_freeable)
return 0;
/*
* Subtract from the lru size the number of pages that are recently swapped
* in from disk. The idea is that had we protect the zswap's LRU by this
* amount of pages, these disk swapins would not have happened.
*/
nr_disk_swapins_cur = atomic_long_read(nr_disk_swapins);
do {
if (nr_freeable >= nr_disk_swapins_cur)
nr_remain = 0;
else
nr_remain = nr_disk_swapins_cur - nr_freeable;
} while (!atomic_long_try_cmpxchg(
nr_disk_swapins, &nr_disk_swapins_cur, nr_remain));
nr_freeable -= nr_disk_swapins_cur - nr_remain;
if (!nr_freeable)
return 0;
/*
* Scale the number of freeable pages by the memory saving factor.
* This ensures that the better zswap compresses memory, the fewer
* pages we will evict to swap (as it will otherwise incur IO for
* relatively small memory saving).
*/
return mult_frac(nr_freeable, nr_backing, nr_stored);
}
static struct shrinker *zswap_alloc_shrinker(void)
{
struct shrinker *shrinker;
shrinker =
shrinker_alloc(SHRINKER_NUMA_AWARE | SHRINKER_MEMCG_AWARE, "mm-zswap");
if (!shrinker)
return NULL;
shrinker->scan_objects = zswap_shrinker_scan;
shrinker->count_objects = zswap_shrinker_count;
shrinker->batch = 0;
shrinker->seeks = DEFAULT_SEEKS;
return shrinker;
}
static int shrink_memcg(struct mem_cgroup *memcg)
{
int nid, shrunk = 0, scanned = 0;
if (!mem_cgroup_zswap_writeback_enabled(memcg))
return -ENOENT;
/*
* Skip zombies because their LRUs are reparented and we would be
* reclaiming from the parent instead of the dead memcg.
*/
if (memcg && !mem_cgroup_online(memcg))
return -ENOENT;
for_each_node_state(nid, N_NORMAL_MEMORY) {
unsigned long nr_to_walk = 1;
shrunk += list_lru_walk_one(&zswap_list_lru, nid, memcg,
&shrink_memcg_cb, NULL, &nr_to_walk);
scanned += 1 - nr_to_walk;
}
if (!scanned)
return -ENOENT;
return shrunk ? 0 : -EAGAIN;
}
static void shrink_worker(struct work_struct *w)
{
struct mem_cgroup *memcg;
int ret, failures = 0, attempts = 0;
unsigned long thr;
/* Reclaim down to the accept threshold */
thr = zswap_accept_thr_pages();
/*
* Global reclaim will select cgroup in a round-robin fashion from all
* online memcgs, but memcgs that have no pages in zswap and
* writeback-disabled memcgs (memory.zswap.writeback=0) are not
* candidates for shrinking.
*
* Shrinking will be aborted if we encounter the following
* MAX_RECLAIM_RETRIES times:
* - No writeback-candidate memcgs found in a memcg tree walk.
* - Shrinking a writeback-candidate memcg failed.
*
* We save iteration cursor memcg into zswap_next_shrink,
* which can be modified by the offline memcg cleaner
* zswap_memcg_offline_cleanup().
*
* Since the offline cleaner is called only once, we cannot leave an
* offline memcg reference in zswap_next_shrink.
* We can rely on the cleaner only if we get online memcg under lock.
*
* If we get an offline memcg, we cannot determine if the cleaner has
* already been called or will be called later. We must put back the
* reference before returning from this function. Otherwise, the
* offline memcg left in zswap_next_shrink will hold the reference
* until the next run of shrink_worker().
*/
do {
/*
* Start shrinking from the next memcg after zswap_next_shrink.
* When the offline cleaner has already advanced the cursor,
* advancing the cursor here overlooks one memcg, but this
* should be negligibly rare.
*
* If we get an online memcg, keep the extra reference in case
* the original one obtained by mem_cgroup_iter() is dropped by
* zswap_memcg_offline_cleanup() while we are shrinking the
* memcg.
*/
spin_lock(&zswap_shrink_lock);
do {
memcg = mem_cgroup_iter(NULL, zswap_next_shrink, NULL);
zswap_next_shrink = memcg;
} while (memcg && !mem_cgroup_tryget_online(memcg));
spin_unlock(&zswap_shrink_lock);
if (!memcg) {
/*
* Continue shrinking without incrementing failures if
* we found candidate memcgs in the last tree walk.
*/
if (!attempts && ++failures == MAX_RECLAIM_RETRIES)
break;
attempts = 0;
goto resched;
}
ret = shrink_memcg(memcg);
/* drop the extra reference */
mem_cgroup_put(memcg);
/*
* There are no writeback-candidate pages in the memcg.
* This is not an issue as long as we can find another memcg
* with pages in zswap. Skip this without incrementing attempts
* and failures.
*/
if (ret == -ENOENT)
continue;
++attempts;
if (ret && ++failures == MAX_RECLAIM_RETRIES)
break;
resched:
cond_resched();
} while (zswap_total_pages() > thr);
}
/*********************************
* main API
**********************************/
static ssize_t zswap_store_page(struct page *page,
struct obj_cgroup *objcg,
struct zswap_pool *pool)
{
struct zswap_entry *entry, *old;
/* allocate entry */
entry = zswap_entry_cache_alloc(GFP_KERNEL, page_to_nid(page));
if (!entry) {
zswap_reject_kmemcache_fail++;
goto reject;
}
/* zswap_store() already holds a ref on 'objcg' and 'pool' */
if (objcg)
obj_cgroup_get(objcg);
zswap_pool_get(pool);
/* if entry is successfully added, it keeps the reference */
entry->pool = pool;
if (!zswap_compress(page, entry))
goto put_pool_objcg;
entry->swpentry = page_swap_entry(page);
entry->objcg = objcg;
entry->referenced = true;
old = xa_store(swap_zswap_tree(entry->swpentry),
swp_offset(entry->swpentry),
entry, GFP_KERNEL);
if (xa_is_err(old)) {
int err = xa_err(old);
WARN_ONCE(err != -ENOMEM, "unexpected xarray error: %d\n", err);
zswap_reject_alloc_fail++;
goto store_failed;
}
/*
* We may have had an existing entry that became stale when
* the folio was redirtied and now the new version is being
* swapped out. Get rid of the old.
*/
if (old)
zswap_entry_free(old);
/*
* We finish initializing the entry while it's already in xarray.
* This is safe because:
*
* 1. Concurrent stores and invalidations are excluded by folio lock.
*
* 2. Writeback is excluded by the entry not being on the LRU yet.
* The publishing order matters to prevent writeback from seeing
* an incoherent entry.
*/
if (entry->length) {
INIT_LIST_HEAD(&entry->lru);
zswap_lru_add(&zswap_list_lru, entry);
}
/*
* We shouldn't have any possibility of failure after the entry is
* added in the xarray. The pool/objcg refs obtained here will only
* be dropped if/when zswap_entry_free() gets called.
*/
return entry->length;
store_failed:
zpool_free(entry->pool->zpool, entry->handle);
put_pool_objcg:
zswap_pool_put(pool);
obj_cgroup_put(objcg);
zswap_entry_cache_free(entry);
reject:
return -EINVAL;
}
bool zswap_store(struct folio *folio)
{
long nr_pages = folio_nr_pages(folio);
swp_entry_t swp = folio->swap;
struct obj_cgroup *objcg = NULL;
struct mem_cgroup *memcg = NULL;
struct zswap_pool *pool;
size_t compressed_bytes = 0;
bool ret = false;
long index;
VM_WARN_ON_ONCE(!folio_test_locked(folio));
VM_WARN_ON_ONCE(!folio_test_swapcache(folio));
if (!zswap_enabled)
goto check_old;
objcg = get_obj_cgroup_from_folio(folio);
if (objcg && !obj_cgroup_may_zswap(objcg)) {
memcg = get_mem_cgroup_from_objcg(objcg);
if (shrink_memcg(memcg)) {
mem_cgroup_put(memcg);
goto put_objcg;
}
mem_cgroup_put(memcg);
}
if (zswap_check_limits())
goto put_objcg;
pool = zswap_pool_current_get();
if (!pool)
goto put_objcg;
if (objcg) {
memcg = get_mem_cgroup_from_objcg(objcg);
if (memcg_list_lru_alloc(memcg, &zswap_list_lru, GFP_KERNEL)) {
mem_cgroup_put(memcg);
goto put_pool;
}
mem_cgroup_put(memcg);
}
for (index = 0; index < nr_pages; ++index) {
struct page *page = folio_page(folio, index);
ssize_t bytes;
bytes = zswap_store_page(page, objcg, pool);
if (bytes < 0)
goto put_pool;
compressed_bytes += bytes;
}
if (objcg) {
obj_cgroup_charge_zswap(objcg, compressed_bytes);
count_objcg_events(objcg, ZSWPOUT, nr_pages);
}
atomic_long_add(nr_pages, &zswap_stored_pages);
count_vm_events(ZSWPOUT, nr_pages);
ret = true;
put_pool:
zswap_pool_put(pool);
put_objcg:
obj_cgroup_put(objcg);
if (!ret && zswap_pool_reached_full)
queue_work(shrink_wq, &zswap_shrink_work);
check_old:
/*
* If the zswap store fails or zswap is disabled, we must invalidate
* the possibly stale entries which were previously stored at the
* offsets corresponding to each page of the folio. Otherwise,
* writeback could overwrite the new data in the swapfile.
*/
if (!ret) {
unsigned type = swp_type(swp);
pgoff_t offset = swp_offset(swp);
struct zswap_entry *entry;
struct xarray *tree;
for (index = 0; index < nr_pages; ++index) {
tree = swap_zswap_tree(swp_entry(type, offset + index));
entry = xa_erase(tree, offset + index);
if (entry)
zswap_entry_free(entry);
}
}
return ret;
}
bool zswap_load(struct folio *folio)
{
swp_entry_t swp = folio->swap;
pgoff_t offset = swp_offset(swp);
bool swapcache = folio_test_swapcache(folio);
struct xarray *tree = swap_zswap_tree(swp);
struct zswap_entry *entry;
VM_WARN_ON_ONCE(!folio_test_locked(folio));
if (zswap_never_enabled())
return false;
/*
* Large folios should not be swapped in while zswap is being used, as
* they are not properly handled. Zswap does not properly load large
* folios, and a large folio may only be partially in zswap.
*
* Return true without marking the folio uptodate so that an IO error is
* emitted (e.g. do_swap_page() will sigbus).
*/
if (WARN_ON_ONCE(folio_test_large(folio)))
return true;
/*
* When reading into the swapcache, invalidate our entry. The
* swapcache can be the authoritative owner of the page and
* its mappings, and the pressure that results from having two
* in-memory copies outweighs any benefits of caching the
* compression work.
*
* (Most swapins go through the swapcache. The notable
* exception is the singleton fault on SWP_SYNCHRONOUS_IO
* files, which reads into a private page and may free it if
* the fault fails. We remain the primary owner of the entry.)
*/
if (swapcache)
entry = xa_erase(tree, offset);
else
entry = xa_load(tree, offset);
if (!entry)
return false;
zswap_decompress(entry, folio);
count_vm_event(ZSWPIN);
if (entry->objcg)
count_objcg_events(entry->objcg, ZSWPIN, 1);
if (swapcache) {
zswap_entry_free(entry);
folio_mark_dirty(folio);
}
folio_mark_uptodate(folio);
return true;
}
void zswap_invalidate(swp_entry_t swp)
{
pgoff_t offset = swp_offset(swp);
struct xarray *tree = swap_zswap_tree(swp);
struct zswap_entry *entry;
if (xa_empty(tree))
return;
entry = xa_erase(tree, offset);
if (entry)
zswap_entry_free(entry);
}
int zswap_swapon(int type, unsigned long nr_pages)
{
struct xarray *trees, *tree;
unsigned int nr, i;
nr = DIV_ROUND_UP(nr_pages, SWAP_ADDRESS_SPACE_PAGES);
trees = kvcalloc(nr, sizeof(*tree), GFP_KERNEL);
if (!trees) {
pr_err("alloc failed, zswap disabled for swap type %d\n", type);
return -ENOMEM;
}
for (i = 0; i < nr; i++)
xa_init(trees + i);
nr_zswap_trees[type] = nr;
zswap_trees[type] = trees;
return 0;
}
void zswap_swapoff(int type)
{
struct xarray *trees = zswap_trees[type];
unsigned int i;
if (!trees)
return;
/* try_to_unuse() invalidated all the entries already */
for (i = 0; i < nr_zswap_trees[type]; i++)
WARN_ON_ONCE(!xa_empty(trees + i));
kvfree(trees);
nr_zswap_trees[type] = 0;
zswap_trees[type] = NULL;
}
/*********************************
* debugfs functions
**********************************/
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
static struct dentry *zswap_debugfs_root;
static int debugfs_get_total_size(void *data, u64 *val)
{
*val = zswap_total_pages() * PAGE_SIZE;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(total_size_fops, debugfs_get_total_size, NULL, "%llu\n");
static int debugfs_get_stored_pages(void *data, u64 *val)
{
*val = atomic_long_read(&zswap_stored_pages);
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(stored_pages_fops, debugfs_get_stored_pages, NULL, "%llu\n");
static int zswap_debugfs_init(void)
{
if (!debugfs_initialized())
return -ENODEV;
zswap_debugfs_root = debugfs_create_dir("zswap", NULL);
debugfs_create_u64("pool_limit_hit", 0444,
zswap_debugfs_root, &zswap_pool_limit_hit);
debugfs_create_u64("reject_reclaim_fail", 0444,
zswap_debugfs_root, &zswap_reject_reclaim_fail);
debugfs_create_u64("reject_alloc_fail", 0444,
zswap_debugfs_root, &zswap_reject_alloc_fail);
debugfs_create_u64("reject_kmemcache_fail", 0444,
zswap_debugfs_root, &zswap_reject_kmemcache_fail);
debugfs_create_u64("reject_compress_fail", 0444,
zswap_debugfs_root, &zswap_reject_compress_fail);
debugfs_create_u64("reject_compress_poor", 0444,
zswap_debugfs_root, &zswap_reject_compress_poor);
debugfs_create_u64("written_back_pages", 0444,
zswap_debugfs_root, &zswap_written_back_pages);
debugfs_create_file("pool_total_size", 0444,
zswap_debugfs_root, NULL, &total_size_fops);
debugfs_create_file("stored_pages", 0444,
zswap_debugfs_root, NULL, &stored_pages_fops);
return 0;
}
#else
static int zswap_debugfs_init(void)
{
return 0;
}
#endif
/*********************************
* module init and exit
**********************************/
static int zswap_setup(void)
{
struct zswap_pool *pool;
int ret;
zswap_entry_cache = KMEM_CACHE(zswap_entry, 0);
if (!zswap_entry_cache) {
pr_err("entry cache creation failed\n");
goto cache_fail;
}
ret = cpuhp_setup_state_multi(CPUHP_MM_ZSWP_POOL_PREPARE,
"mm/zswap_pool:prepare",
zswap_cpu_comp_prepare,
zswap_cpu_comp_dead);
if (ret)
goto hp_fail;
shrink_wq = alloc_workqueue("zswap-shrink",
WQ_UNBOUND|WQ_MEM_RECLAIM, 1);
if (!shrink_wq)
goto shrink_wq_fail;
zswap_shrinker = zswap_alloc_shrinker();
if (!zswap_shrinker)
goto shrinker_fail;
if (list_lru_init_memcg(&zswap_list_lru, zswap_shrinker))
goto lru_fail;
shrinker_register(zswap_shrinker);
INIT_WORK(&zswap_shrink_work, shrink_worker);
pool = __zswap_pool_create_fallback();
if (pool) {
pr_info("loaded using pool %s/%s\n", pool->tfm_name,
zpool_get_type(pool->zpool));
list_add(&pool->list, &zswap_pools);
zswap_has_pool = true;
static_branch_enable(&zswap_ever_enabled);
} else {
pr_err("pool creation failed\n");
zswap_enabled = false;
}
if (zswap_debugfs_init())
pr_warn("debugfs initialization failed\n");
zswap_init_state = ZSWAP_INIT_SUCCEED;
return 0;
lru_fail:
shrinker_free(zswap_shrinker);
shrinker_fail:
destroy_workqueue(shrink_wq);
shrink_wq_fail:
cpuhp_remove_multi_state(CPUHP_MM_ZSWP_POOL_PREPARE);
hp_fail:
kmem_cache_destroy(zswap_entry_cache);
cache_fail:
/* if built-in, we aren't unloaded on failure; don't allow use */
zswap_init_state = ZSWAP_INIT_FAILED;
zswap_enabled = false;
return -ENOMEM;
}
static int __init zswap_init(void)
{
if (!zswap_enabled)
return 0;
return zswap_setup();
}
/* must be late so crypto has time to come up */
late_initcall(zswap_init);
MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
MODULE_DESCRIPTION("Compressed cache for swap pages");