c834963932
Ethernet frames can be extracted or injected to or from the device's DDR memory. There is one channel for injection and one channel for extraction. Each of these channels contain a linked list of DCBs which contains DB. The DCB contains only 1 DB for both the injection and extraction. Each DB contains a frame. Every time when a frame is received or transmitted an interrupt is generated. It is not possible to use both the FDMA and the manual injection/extraction of the frames. Therefore the FDMA has priority over the manual because of better performance values. FDMA: iperf -c 192.168.1.1 [ 5] 0.00-10.02 sec 420 MBytes 352 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 420 MBytes 351 Mbits/sec receiver iperf -c 192.168.1.1 -R [ 5] 0.00-10.01 sec 528 MBytes 442 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 524 MBytes 440 Mbits/sec receiver Manual: iperf -c 192.168.1.1 [ 5] 0.00-10.02 sec 93.8 MBytes 78.5 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 93.8 MBytes 78.4 Mbits/sec receiver ipers -c 192.168.1.1 -R [ 5] 0.00-10.03 sec 121 MBytes 101 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 118 MBytes 99.0 Mbits/sec receiver Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
11 lines
367 B
Makefile
11 lines
367 B
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Makefile for the Microchip Lan966x network device drivers.
|
|
#
|
|
|
|
obj-$(CONFIG_LAN966X_SWITCH) += lan966x-switch.o
|
|
|
|
lan966x-switch-objs := lan966x_main.o lan966x_phylink.o lan966x_port.o \
|
|
lan966x_mac.o lan966x_ethtool.o lan966x_switchdev.o \
|
|
lan966x_vlan.o lan966x_fdb.o lan966x_mdb.o \
|
|
lan966x_ptp.o lan966x_fdma.o
|