1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
linux/drivers/net/wireless/intel/iwlwifi/fw/api/datapath.h
Johannes Berg c48e93a654 iwlwifi: mvm: support RLC configuration command
There's an RLC configuration command in the firmware that's
going to replace the chain information in the PHY context.
Add support for this command, while leaving the PHY context
fields unset when we know the RLC command will be used.

Also add support to send only the RLC configuration command
if only the # of chains used on the PHY context changes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.55faa3782bb0.I3f9d0071e680cab513c59b093d0827af99d41c51@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07 20:06:35 +02:00

260 lines
6.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright (C) 2012-2014, 2018-2020 Intel Corporation
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH
* Copyright (C) 2016-2017 Intel Deutschland GmbH
*/
#ifndef __iwl_fw_api_datapath_h__
#define __iwl_fw_api_datapath_h__
/**
* enum iwl_data_path_subcmd_ids - data path group commands
*/
enum iwl_data_path_subcmd_ids {
/**
* @DQA_ENABLE_CMD: &struct iwl_dqa_enable_cmd
*/
DQA_ENABLE_CMD = 0x0,
/**
* @UPDATE_MU_GROUPS_CMD: &struct iwl_mu_group_mgmt_cmd
*/
UPDATE_MU_GROUPS_CMD = 0x1,
/**
* @TRIGGER_RX_QUEUES_NOTIF_CMD: &struct iwl_rxq_sync_cmd
*/
TRIGGER_RX_QUEUES_NOTIF_CMD = 0x2,
/**
* @STA_HE_CTXT_CMD: &struct iwl_he_sta_context_cmd
*/
STA_HE_CTXT_CMD = 0x7,
/**
* @RLC_CONFIG_CMD: &struct iwl_rlc_config_cmd
*/
RLC_CONFIG_CMD = 0x8,
/**
* @RFH_QUEUE_CONFIG_CMD: &struct iwl_rfh_queue_config
*/
RFH_QUEUE_CONFIG_CMD = 0xD,
/**
* @TLC_MNG_CONFIG_CMD: &struct iwl_tlc_config_cmd
*/
TLC_MNG_CONFIG_CMD = 0xF,
/**
* @HE_AIR_SNIFFER_CONFIG_CMD: &struct iwl_he_monitor_cmd
*/
HE_AIR_SNIFFER_CONFIG_CMD = 0x13,
/**
* @CHEST_COLLECTOR_FILTER_CONFIG_CMD: Configure the CSI
* matrix collection, uses &struct iwl_channel_estimation_cfg
*/
CHEST_COLLECTOR_FILTER_CONFIG_CMD = 0x14,
/**
* @MONITOR_NOTIF: Datapath monitoring notification, using
* &struct iwl_datapath_monitor_notif
*/
MONITOR_NOTIF = 0xF4,
/**
* @RX_NO_DATA_NOTIF: &struct iwl_rx_no_data
*/
RX_NO_DATA_NOTIF = 0xF5,
/**
* @THERMAL_DUAL_CHAIN_DISABLE_REQ: firmware request for SMPS mode,
* &struct iwl_thermal_dual_chain_request
*/
THERMAL_DUAL_CHAIN_REQUEST = 0xF6,
/**
* @TLC_MNG_UPDATE_NOTIF: &struct iwl_tlc_update_notif
*/
TLC_MNG_UPDATE_NOTIF = 0xF7,
/**
* @STA_PM_NOTIF: &struct iwl_mvm_pm_state_notification
*/
STA_PM_NOTIF = 0xFD,
/**
* @MU_GROUP_MGMT_NOTIF: &struct iwl_mu_group_mgmt_notif
*/
MU_GROUP_MGMT_NOTIF = 0xFE,
/**
* @RX_QUEUES_NOTIFICATION: &struct iwl_rxq_sync_notification
*/
RX_QUEUES_NOTIFICATION = 0xFF,
};
/**
* struct iwl_mu_group_mgmt_cmd - VHT MU-MIMO group configuration
*
* @reserved: reserved
* @membership_status: a bitmap of MU groups
* @user_position:the position of station in a group. If the station is in the
* group then bits (group * 2) is the position -1
*/
struct iwl_mu_group_mgmt_cmd {
__le32 reserved;
__le32 membership_status[2];
__le32 user_position[4];
} __packed; /* MU_GROUP_ID_MNG_TABLE_API_S_VER_1 */
/**
* struct iwl_mu_group_mgmt_notif - VHT MU-MIMO group id notification
*
* @membership_status: a bitmap of MU groups
* @user_position: the position of station in a group. If the station is in the
* group then bits (group * 2) is the position -1
*/
struct iwl_mu_group_mgmt_notif {
__le32 membership_status[2];
__le32 user_position[4];
} __packed; /* MU_GROUP_MNG_NTFY_API_S_VER_1 */
enum iwl_channel_estimation_flags {
IWL_CHANNEL_ESTIMATION_ENABLE = BIT(0),
IWL_CHANNEL_ESTIMATION_TIMER = BIT(1),
IWL_CHANNEL_ESTIMATION_COUNTER = BIT(2),
};
/**
* struct iwl_channel_estimation_cfg - channel estimation reporting config
*/
struct iwl_channel_estimation_cfg {
/**
* @flags: flags, see &enum iwl_channel_estimation_flags
*/
__le32 flags;
/**
* @timer: if enabled via flags, automatically disable after this many
* microseconds
*/
__le32 timer;
/**
* @count: if enabled via flags, automatically disable after this many
* frames with channel estimation matrix were captured
*/
__le32 count;
/**
* @rate_n_flags_mask: only try to record the channel estimation matrix
* if the rate_n_flags value for the received frame (let's call
* that rx_rnf) matches the mask/value given here like this:
* (rx_rnf & rate_n_flags_mask) == rate_n_flags_val.
*/
__le32 rate_n_flags_mask;
/**
* @rate_n_flags_val: see @rate_n_flags_mask
*/
__le32 rate_n_flags_val;
/**
* @reserved: reserved (for alignment)
*/
__le32 reserved;
/**
* @frame_types: bitmap of frame types to capture, the received frame's
* subtype|type takes 6 bits in the frame and the corresponding bit
* in this field must be set to 1 to capture channel estimation for
* that frame type. Set to all-ones to enable capturing for all
* frame types.
*/
__le64 frame_types;
} __packed; /* CHEST_COLLECTOR_FILTER_CMD_API_S_VER_1 */
enum iwl_datapath_monitor_notif_type {
IWL_DP_MON_NOTIF_TYPE_EXT_CCA,
};
struct iwl_datapath_monitor_notif {
__le32 type;
u8 mac_id;
u8 reserved[3];
} __packed; /* MONITOR_NTF_API_S_VER_1 */
/**
* enum iwl_thermal_dual_chain_req_events - firmware SMPS request event
* @THERMAL_DUAL_CHAIN_REQ_ENABLE: (re-)enable dual-chain operation
* (subject to other constraints)
* @THERMAL_DUAL_CHAIN_REQ_DISABLE: disable dual-chain operation
* (static SMPS)
*/
enum iwl_thermal_dual_chain_req_events {
THERMAL_DUAL_CHAIN_REQ_ENABLE,
THERMAL_DUAL_CHAIN_REQ_DISABLE,
}; /* THERMAL_DUAL_CHAIN_DISABLE_STATE_API_E_VER_1 */
/**
* struct iwl_thermal_dual_chain_request - SMPS request
* @event: the type of request, see &enum iwl_thermal_dual_chain_req_events
*/
struct iwl_thermal_dual_chain_request {
__le32 event;
} __packed; /* THERMAL_DUAL_CHAIN_DISABLE_REQ_NTFY_API_S_VER_1 */
enum iwl_rlc_chain_info {
IWL_RLC_CHAIN_INFO_DRIVER_FORCE = BIT(0),
IWL_RLC_CHAIN_INFO_VALID = 0x000e,
IWL_RLC_CHAIN_INFO_FORCE = 0x0070,
IWL_RLC_CHAIN_INFO_FORCE_MIMO = 0x0380,
IWL_RLC_CHAIN_INFO_COUNT = 0x0c00,
IWL_RLC_CHAIN_INFO_MIMO_COUNT = 0x3000,
};
/**
* struct iwl_rlc_properties - RLC properties
* @rx_chain_info: RX chain info, &enum iwl_rlc_chain_info
* @reserved: reserved
*/
struct iwl_rlc_properties {
__le32 rx_chain_info;
__le32 reserved;
} __packed; /* RLC_PROPERTIES_S_VER_1 */
enum iwl_sad_mode {
IWL_SAD_MODE_ENABLED = BIT(0),
IWL_SAD_MODE_DEFAULT_ANT_MSK = 0x6,
IWL_SAD_MODE_DEFAULT_ANT_FW = 0x0,
IWL_SAD_MODE_DEFAULT_ANT_A = 0x2,
IWL_SAD_MODE_DEFAULT_ANT_B = 0x4,
};
/**
* struct iwl_sad_properties - SAD properties
* @chain_a_sad_mode: chain A SAD mode, &enum iwl_sad_mode
* @chain_b_sad_mode: chain B SAD mode, &enum iwl_sad_mode
* @mac_id: MAC index
* @reserved: reserved
*/
struct iwl_sad_properties {
__le32 chain_a_sad_mode;
__le32 chain_b_sad_mode;
__le32 mac_id;
__le32 reserved;
} __packed;
/**
* struct iwl_rlc_config_cmd - RLC configuration
* @phy_id: PHY index
* @rlc: RLC properties, &struct iwl_rlc_properties
* @sad: SAD (single antenna diversity) options, &struct iwl_sad_properties
* @flags: flags, &enum iwl_rlc_flags
* @reserved: reserved
*/
struct iwl_rlc_config_cmd {
__le32 phy_id;
struct iwl_rlc_properties rlc;
struct iwl_sad_properties sad;
u8 flags;
u8 reserved[3];
} __packed; /* RLC_CONFIG_CMD_API_S_VER_2 */
#endif /* __iwl_fw_api_datapath_h__ */