Use the newly introduced pcs_init() and pcs_exit() operations to create and destroy the PCS instance at a more appropriate moment during the driver lifecycle, thereby avoiding publishing a network device to userspace that has not yet finished its PCS initialisation. There are other similar issues with this driver which remain unaddressed, but these are out of scope for this patch. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> [rgantois: removed second parameters of new callbacks] Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240513-rzn1-gmac1-v7-5-6acf58b5440d@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
588 lines
16 KiB
C
588 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* Copyright Altera Corporation (C) 2014. All rights reserved.
|
|
*
|
|
* Adopted from dwmac-sti.c
|
|
*/
|
|
|
|
#include <linux/mfd/altera-sysmgr.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mdio/mdio-regmap.h>
|
|
#include <linux/pcs-lynx.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/stmmac.h>
|
|
|
|
#include "stmmac.h"
|
|
#include "stmmac_platform.h"
|
|
|
|
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
|
|
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
|
|
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
|
|
#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2
|
|
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
|
|
#define SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000010
|
|
#define SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000100
|
|
|
|
#define SYSMGR_FPGAGRP_MODULE_REG 0x00000028
|
|
#define SYSMGR_FPGAGRP_MODULE_EMAC 0x00000004
|
|
#define SYSMGR_FPGAINTF_EMAC_REG 0x00000070
|
|
#define SYSMGR_FPGAINTF_EMAC_BIT 0x1
|
|
|
|
#define EMAC_SPLITTER_CTRL_REG 0x0
|
|
#define EMAC_SPLITTER_CTRL_SPEED_MASK 0x3
|
|
#define EMAC_SPLITTER_CTRL_SPEED_10 0x2
|
|
#define EMAC_SPLITTER_CTRL_SPEED_100 0x3
|
|
#define EMAC_SPLITTER_CTRL_SPEED_1000 0x0
|
|
|
|
#define SGMII_ADAPTER_CTRL_REG 0x00
|
|
#define SGMII_ADAPTER_ENABLE 0x0000
|
|
#define SGMII_ADAPTER_DISABLE 0x0001
|
|
|
|
struct socfpga_dwmac;
|
|
struct socfpga_dwmac_ops {
|
|
int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv);
|
|
};
|
|
|
|
struct socfpga_dwmac {
|
|
u32 reg_offset;
|
|
u32 reg_shift;
|
|
struct device *dev;
|
|
struct regmap *sys_mgr_base_addr;
|
|
struct reset_control *stmmac_rst;
|
|
struct reset_control *stmmac_ocp_rst;
|
|
void __iomem *splitter_base;
|
|
void __iomem *tse_pcs_base;
|
|
void __iomem *sgmii_adapter_base;
|
|
bool f2h_ptp_ref_clk;
|
|
const struct socfpga_dwmac_ops *ops;
|
|
struct mdio_device *pcs_mdiodev;
|
|
};
|
|
|
|
static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed, unsigned int mode)
|
|
{
|
|
struct socfpga_dwmac *dwmac = (struct socfpga_dwmac *)priv;
|
|
void __iomem *splitter_base = dwmac->splitter_base;
|
|
void __iomem *sgmii_adapter_base = dwmac->sgmii_adapter_base;
|
|
struct device *dev = dwmac->dev;
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct phy_device *phy_dev = ndev->phydev;
|
|
u32 val;
|
|
|
|
if (sgmii_adapter_base)
|
|
writew(SGMII_ADAPTER_DISABLE,
|
|
sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
|
|
|
|
if (splitter_base) {
|
|
val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
|
|
val &= ~EMAC_SPLITTER_CTRL_SPEED_MASK;
|
|
|
|
switch (speed) {
|
|
case 1000:
|
|
val |= EMAC_SPLITTER_CTRL_SPEED_1000;
|
|
break;
|
|
case 100:
|
|
val |= EMAC_SPLITTER_CTRL_SPEED_100;
|
|
break;
|
|
case 10:
|
|
val |= EMAC_SPLITTER_CTRL_SPEED_10;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
|
|
}
|
|
|
|
if (phy_dev && sgmii_adapter_base)
|
|
writew(SGMII_ADAPTER_ENABLE,
|
|
sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
|
|
}
|
|
|
|
static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
struct regmap *sys_mgr_base_addr;
|
|
u32 reg_offset, reg_shift;
|
|
int ret, index;
|
|
struct device_node *np_splitter = NULL;
|
|
struct device_node *np_sgmii_adapter = NULL;
|
|
struct resource res_splitter;
|
|
struct resource res_tse_pcs;
|
|
struct resource res_sgmii_adapter;
|
|
|
|
sys_mgr_base_addr =
|
|
altr_sysmgr_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
|
|
if (IS_ERR(sys_mgr_base_addr)) {
|
|
dev_info(dev, "No sysmgr-syscon node found\n");
|
|
return PTR_ERR(sys_mgr_base_addr);
|
|
}
|
|
|
|
ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 1, ®_offset);
|
|
if (ret) {
|
|
dev_info(dev, "Could not read reg_offset from sysmgr-syscon!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 2, ®_shift);
|
|
if (ret) {
|
|
dev_info(dev, "Could not read reg_shift from sysmgr-syscon!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dwmac->f2h_ptp_ref_clk = of_property_read_bool(np, "altr,f2h_ptp_ref_clk");
|
|
|
|
np_splitter = of_parse_phandle(np, "altr,emac-splitter", 0);
|
|
if (np_splitter) {
|
|
ret = of_address_to_resource(np_splitter, 0, &res_splitter);
|
|
of_node_put(np_splitter);
|
|
if (ret) {
|
|
dev_info(dev, "Missing emac splitter address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dwmac->splitter_base = devm_ioremap_resource(dev, &res_splitter);
|
|
if (IS_ERR(dwmac->splitter_base)) {
|
|
dev_info(dev, "Failed to mapping emac splitter\n");
|
|
return PTR_ERR(dwmac->splitter_base);
|
|
}
|
|
}
|
|
|
|
np_sgmii_adapter = of_parse_phandle(np,
|
|
"altr,gmii-to-sgmii-converter", 0);
|
|
if (np_sgmii_adapter) {
|
|
index = of_property_match_string(np_sgmii_adapter, "reg-names",
|
|
"hps_emac_interface_splitter_avalon_slave");
|
|
|
|
if (index >= 0) {
|
|
if (of_address_to_resource(np_sgmii_adapter, index,
|
|
&res_splitter)) {
|
|
dev_err(dev,
|
|
"%s: ERROR: missing emac splitter address\n",
|
|
__func__);
|
|
ret = -EINVAL;
|
|
goto err_node_put;
|
|
}
|
|
|
|
dwmac->splitter_base =
|
|
devm_ioremap_resource(dev, &res_splitter);
|
|
|
|
if (IS_ERR(dwmac->splitter_base)) {
|
|
ret = PTR_ERR(dwmac->splitter_base);
|
|
goto err_node_put;
|
|
}
|
|
}
|
|
|
|
index = of_property_match_string(np_sgmii_adapter, "reg-names",
|
|
"gmii_to_sgmii_adapter_avalon_slave");
|
|
|
|
if (index >= 0) {
|
|
if (of_address_to_resource(np_sgmii_adapter, index,
|
|
&res_sgmii_adapter)) {
|
|
dev_err(dev,
|
|
"%s: ERROR: failed mapping adapter\n",
|
|
__func__);
|
|
ret = -EINVAL;
|
|
goto err_node_put;
|
|
}
|
|
|
|
dwmac->sgmii_adapter_base =
|
|
devm_ioremap_resource(dev, &res_sgmii_adapter);
|
|
|
|
if (IS_ERR(dwmac->sgmii_adapter_base)) {
|
|
ret = PTR_ERR(dwmac->sgmii_adapter_base);
|
|
goto err_node_put;
|
|
}
|
|
}
|
|
|
|
index = of_property_match_string(np_sgmii_adapter, "reg-names",
|
|
"eth_tse_control_port");
|
|
|
|
if (index >= 0) {
|
|
if (of_address_to_resource(np_sgmii_adapter, index,
|
|
&res_tse_pcs)) {
|
|
dev_err(dev,
|
|
"%s: ERROR: failed mapping tse control port\n",
|
|
__func__);
|
|
ret = -EINVAL;
|
|
goto err_node_put;
|
|
}
|
|
|
|
dwmac->tse_pcs_base =
|
|
devm_ioremap_resource(dev, &res_tse_pcs);
|
|
|
|
if (IS_ERR(dwmac->tse_pcs_base)) {
|
|
ret = PTR_ERR(dwmac->tse_pcs_base);
|
|
goto err_node_put;
|
|
}
|
|
}
|
|
}
|
|
dwmac->reg_offset = reg_offset;
|
|
dwmac->reg_shift = reg_shift;
|
|
dwmac->sys_mgr_base_addr = sys_mgr_base_addr;
|
|
dwmac->dev = dev;
|
|
of_node_put(np_sgmii_adapter);
|
|
|
|
return 0;
|
|
|
|
err_node_put:
|
|
of_node_put(np_sgmii_adapter);
|
|
return ret;
|
|
}
|
|
|
|
static int socfpga_get_plat_phymode(struct socfpga_dwmac *dwmac)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dwmac->dev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
|
|
return priv->plat->mac_interface;
|
|
}
|
|
|
|
static void socfpga_sgmii_config(struct socfpga_dwmac *dwmac, bool enable)
|
|
{
|
|
u16 val = enable ? SGMII_ADAPTER_ENABLE : SGMII_ADAPTER_DISABLE;
|
|
|
|
writew(val, dwmac->sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
|
|
}
|
|
|
|
static int socfpga_set_phy_mode_common(int phymode, u32 *val)
|
|
{
|
|
switch (phymode) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
|
|
break;
|
|
case PHY_INTERFACE_MODE_MII:
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
|
|
{
|
|
struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
|
|
int phymode = socfpga_get_plat_phymode(dwmac);
|
|
u32 reg_offset = dwmac->reg_offset;
|
|
u32 reg_shift = dwmac->reg_shift;
|
|
u32 ctrl, val, module;
|
|
|
|
if (socfpga_set_phy_mode_common(phymode, &val)) {
|
|
dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Overwrite val to GMII if splitter core is enabled. The phymode here
|
|
* is the actual phy mode on phy hardware, but phy interface from
|
|
* EMAC core is GMII.
|
|
*/
|
|
if (dwmac->splitter_base)
|
|
val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
|
|
|
|
/* Assert reset to the enet controller before changing the phy mode */
|
|
reset_control_assert(dwmac->stmmac_ocp_rst);
|
|
reset_control_assert(dwmac->stmmac_rst);
|
|
|
|
regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
|
|
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
|
|
ctrl |= val << reg_shift;
|
|
|
|
if (dwmac->f2h_ptp_ref_clk ||
|
|
phymode == PHY_INTERFACE_MODE_MII ||
|
|
phymode == PHY_INTERFACE_MODE_GMII ||
|
|
phymode == PHY_INTERFACE_MODE_SGMII) {
|
|
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
|
|
&module);
|
|
module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
|
|
regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
|
|
module);
|
|
}
|
|
|
|
if (dwmac->f2h_ptp_ref_clk)
|
|
ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
|
|
else
|
|
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
|
|
(reg_shift / 2));
|
|
|
|
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
|
|
|
|
/* Deassert reset for the phy configuration to be sampled by
|
|
* the enet controller, and operation to start in requested mode
|
|
*/
|
|
reset_control_deassert(dwmac->stmmac_ocp_rst);
|
|
reset_control_deassert(dwmac->stmmac_rst);
|
|
if (phymode == PHY_INTERFACE_MODE_SGMII)
|
|
socfpga_sgmii_config(dwmac, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int socfpga_gen10_set_phy_mode(struct socfpga_dwmac *dwmac)
|
|
{
|
|
struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
|
|
int phymode = socfpga_get_plat_phymode(dwmac);
|
|
u32 reg_offset = dwmac->reg_offset;
|
|
u32 reg_shift = dwmac->reg_shift;
|
|
u32 ctrl, val, module;
|
|
|
|
if (socfpga_set_phy_mode_common(phymode, &val))
|
|
return -EINVAL;
|
|
|
|
/* Overwrite val to GMII if splitter core is enabled. The phymode here
|
|
* is the actual phy mode on phy hardware, but phy interface from
|
|
* EMAC core is GMII.
|
|
*/
|
|
if (dwmac->splitter_base)
|
|
val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
|
|
|
|
/* Assert reset to the enet controller before changing the phy mode */
|
|
reset_control_assert(dwmac->stmmac_ocp_rst);
|
|
reset_control_assert(dwmac->stmmac_rst);
|
|
|
|
regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
|
|
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK);
|
|
ctrl |= val;
|
|
|
|
if (dwmac->f2h_ptp_ref_clk ||
|
|
phymode == PHY_INTERFACE_MODE_MII ||
|
|
phymode == PHY_INTERFACE_MODE_GMII ||
|
|
phymode == PHY_INTERFACE_MODE_SGMII) {
|
|
ctrl |= SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK;
|
|
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAINTF_EMAC_REG,
|
|
&module);
|
|
module |= (SYSMGR_FPGAINTF_EMAC_BIT << reg_shift);
|
|
regmap_write(sys_mgr_base_addr, SYSMGR_FPGAINTF_EMAC_REG,
|
|
module);
|
|
} else {
|
|
ctrl &= ~SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK;
|
|
}
|
|
|
|
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
|
|
|
|
/* Deassert reset for the phy configuration to be sampled by
|
|
* the enet controller, and operation to start in requested mode
|
|
*/
|
|
reset_control_deassert(dwmac->stmmac_ocp_rst);
|
|
reset_control_deassert(dwmac->stmmac_rst);
|
|
if (phymode == PHY_INTERFACE_MODE_SGMII)
|
|
socfpga_sgmii_config(dwmac, true);
|
|
return 0;
|
|
}
|
|
|
|
static int socfpga_dwmac_pcs_init(struct stmmac_priv *priv)
|
|
{
|
|
struct socfpga_dwmac *dwmac = priv->plat->bsp_priv;
|
|
struct regmap_config pcs_regmap_cfg = {
|
|
.reg_bits = 16,
|
|
.val_bits = 16,
|
|
.reg_shift = REGMAP_UPSHIFT(1),
|
|
};
|
|
struct mdio_regmap_config mrc;
|
|
struct regmap *pcs_regmap;
|
|
struct phylink_pcs *pcs;
|
|
struct mii_bus *pcs_bus;
|
|
|
|
if (!dwmac->tse_pcs_base)
|
|
return 0;
|
|
|
|
pcs_regmap = devm_regmap_init_mmio(priv->device, dwmac->tse_pcs_base,
|
|
&pcs_regmap_cfg);
|
|
if (IS_ERR(pcs_regmap))
|
|
return PTR_ERR(pcs_regmap);
|
|
|
|
memset(&mrc, 0, sizeof(mrc));
|
|
mrc.regmap = pcs_regmap;
|
|
mrc.parent = priv->device;
|
|
mrc.valid_addr = 0x0;
|
|
mrc.autoscan = false;
|
|
|
|
/* Can't use ndev->name here because it will not have been initialised,
|
|
* and in any case, the user can rename network interfaces at runtime.
|
|
*/
|
|
snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii",
|
|
dev_name(priv->device));
|
|
pcs_bus = devm_mdio_regmap_register(priv->device, &mrc);
|
|
if (IS_ERR(pcs_bus))
|
|
return PTR_ERR(pcs_bus);
|
|
|
|
pcs = lynx_pcs_create_mdiodev(pcs_bus, 0);
|
|
if (IS_ERR(pcs))
|
|
return PTR_ERR(pcs);
|
|
|
|
priv->hw->phylink_pcs = pcs;
|
|
return 0;
|
|
}
|
|
|
|
static void socfpga_dwmac_pcs_exit(struct stmmac_priv *priv)
|
|
{
|
|
if (priv->hw->phylink_pcs)
|
|
lynx_pcs_destroy(priv->hw->phylink_pcs);
|
|
}
|
|
|
|
static int socfpga_dwmac_probe(struct platform_device *pdev)
|
|
{
|
|
struct plat_stmmacenet_data *plat_dat;
|
|
struct stmmac_resources stmmac_res;
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
struct socfpga_dwmac *dwmac;
|
|
struct net_device *ndev;
|
|
struct stmmac_priv *stpriv;
|
|
const struct socfpga_dwmac_ops *ops;
|
|
|
|
ops = device_get_match_data(&pdev->dev);
|
|
if (!ops) {
|
|
dev_err(&pdev->dev, "no of match data provided\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
|
|
if (ret)
|
|
return ret;
|
|
|
|
plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
|
|
if (IS_ERR(plat_dat))
|
|
return PTR_ERR(plat_dat);
|
|
|
|
dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
|
|
if (!dwmac)
|
|
return -ENOMEM;
|
|
|
|
dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp");
|
|
if (IS_ERR(dwmac->stmmac_ocp_rst)) {
|
|
ret = PTR_ERR(dwmac->stmmac_ocp_rst);
|
|
dev_err(dev, "error getting reset control of ocp %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
reset_control_deassert(dwmac->stmmac_ocp_rst);
|
|
|
|
ret = socfpga_dwmac_parse_data(dwmac, dev);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to parse OF data\n");
|
|
return ret;
|
|
}
|
|
|
|
dwmac->ops = ops;
|
|
plat_dat->bsp_priv = dwmac;
|
|
plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
|
|
plat_dat->pcs_init = socfpga_dwmac_pcs_init;
|
|
plat_dat->pcs_exit = socfpga_dwmac_pcs_exit;
|
|
|
|
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ndev = platform_get_drvdata(pdev);
|
|
stpriv = netdev_priv(ndev);
|
|
|
|
/* The socfpga driver needs to control the stmmac reset to set the phy
|
|
* mode. Create a copy of the core reset handle so it can be used by
|
|
* the driver later.
|
|
*/
|
|
dwmac->stmmac_rst = stpriv->plat->stmmac_rst;
|
|
|
|
ret = ops->set_phy_mode(dwmac);
|
|
if (ret)
|
|
goto err_dvr_remove;
|
|
|
|
return 0;
|
|
|
|
err_dvr_remove:
|
|
stmmac_dvr_remove(&pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int socfpga_dwmac_resume(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
struct socfpga_dwmac *dwmac_priv = get_stmmac_bsp_priv(dev);
|
|
|
|
dwmac_priv->ops->set_phy_mode(priv->plat->bsp_priv);
|
|
|
|
/* Before the enet controller is suspended, the phy is suspended.
|
|
* This causes the phy clock to be gated. The enet controller is
|
|
* resumed before the phy, so the clock is still gated "off" when
|
|
* the enet controller is resumed. This code makes sure the phy
|
|
* is "resumed" before reinitializing the enet controller since
|
|
* the enet controller depends on an active phy clock to complete
|
|
* a DMA reset. A DMA reset will "time out" if executed
|
|
* with no phy clock input on the Synopsys enet controller.
|
|
* Verified through Synopsys Case #8000711656.
|
|
*
|
|
* Note that the phy clock is also gated when the phy is isolated.
|
|
* Phy "suspend" and "isolate" controls are located in phy basic
|
|
* control register 0, and can be modified by the phy driver
|
|
* framework.
|
|
*/
|
|
if (ndev->phydev)
|
|
phy_resume(ndev->phydev);
|
|
|
|
return stmmac_resume(dev);
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static int __maybe_unused socfpga_dwmac_runtime_suspend(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
|
|
stmmac_bus_clks_config(priv, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused socfpga_dwmac_runtime_resume(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
|
|
return stmmac_bus_clks_config(priv, true);
|
|
}
|
|
|
|
static const struct dev_pm_ops socfpga_dwmac_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(stmmac_suspend, socfpga_dwmac_resume)
|
|
SET_RUNTIME_PM_OPS(socfpga_dwmac_runtime_suspend, socfpga_dwmac_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct socfpga_dwmac_ops socfpga_gen5_ops = {
|
|
.set_phy_mode = socfpga_gen5_set_phy_mode,
|
|
};
|
|
|
|
static const struct socfpga_dwmac_ops socfpga_gen10_ops = {
|
|
.set_phy_mode = socfpga_gen10_set_phy_mode,
|
|
};
|
|
|
|
static const struct of_device_id socfpga_dwmac_match[] = {
|
|
{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gen5_ops },
|
|
{ .compatible = "altr,socfpga-stmmac-a10-s10", .data = &socfpga_gen10_ops },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
|
|
|
|
static struct platform_driver socfpga_dwmac_driver = {
|
|
.probe = socfpga_dwmac_probe,
|
|
.remove_new = stmmac_pltfr_remove,
|
|
.driver = {
|
|
.name = "socfpga-dwmac",
|
|
.pm = &socfpga_dwmac_pm_ops,
|
|
.of_match_table = socfpga_dwmac_match,
|
|
},
|
|
};
|
|
module_platform_driver(socfpga_dwmac_driver);
|
|
|
|
MODULE_DESCRIPTION("Altera SOC DWMAC Specific Glue layer");
|
|
MODULE_LICENSE("GPL v2");
|