Currently, clock configuration is spread throughout the driver and partially duplicated for the STM32MP1 and STM32 MCU variants. This makes it difficult to keep track of which clocks need to be enabled or disabled in various scenarios. This patch adds symmetric stm32_dwmac_clk_enable/disable() functions that handle all clock configuration, including quirks required while suspending or resuming. syscfg_clk and clk_eth_ck are not present on STM32 MCUs, but it is fine to try to configure them anyway since NULL clocks are ignored. Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Signed-off-by: David S. Miller <davem@davemloft.net>
515 lines
14 KiB
C
515 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* dwmac-stm32.c - DWMAC Specific Glue layer for STM32 MCU
|
|
*
|
|
* Copyright (C) STMicroelectronics SA 2017
|
|
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_wakeirq.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stmmac.h>
|
|
|
|
#include "stmmac_platform.h"
|
|
|
|
#define SYSCFG_MCU_ETH_MASK BIT(23)
|
|
#define SYSCFG_MP1_ETH_MASK GENMASK(23, 16)
|
|
#define SYSCFG_PMCCLRR_OFFSET 0x40
|
|
|
|
#define SYSCFG_PMCR_ETH_CLK_SEL BIT(16)
|
|
#define SYSCFG_PMCR_ETH_REF_CLK_SEL BIT(17)
|
|
|
|
/* CLOCK feed to PHY*/
|
|
#define ETH_CK_F_25M 25000000
|
|
#define ETH_CK_F_50M 50000000
|
|
#define ETH_CK_F_125M 125000000
|
|
|
|
/* Ethernet PHY interface selection in register SYSCFG Configuration
|
|
*------------------------------------------
|
|
* src |BIT(23)| BIT(22)| BIT(21)|BIT(20)|
|
|
*------------------------------------------
|
|
* MII | 0 | 0 | 0 | 1 |
|
|
*------------------------------------------
|
|
* GMII | 0 | 0 | 0 | 0 |
|
|
*------------------------------------------
|
|
* RGMII | 0 | 0 | 1 | n/a |
|
|
*------------------------------------------
|
|
* RMII | 1 | 0 | 0 | n/a |
|
|
*------------------------------------------
|
|
*/
|
|
#define SYSCFG_PMCR_ETH_SEL_MII BIT(20)
|
|
#define SYSCFG_PMCR_ETH_SEL_RGMII BIT(21)
|
|
#define SYSCFG_PMCR_ETH_SEL_RMII BIT(23)
|
|
#define SYSCFG_PMCR_ETH_SEL_GMII 0
|
|
#define SYSCFG_MCU_ETH_SEL_MII 0
|
|
#define SYSCFG_MCU_ETH_SEL_RMII 1
|
|
|
|
/* STM32MP1 register definitions
|
|
*
|
|
* Below table summarizes the clock requirement and clock sources for
|
|
* supported phy interface modes.
|
|
* __________________________________________________________________________
|
|
*|PHY_MODE | Normal | PHY wo crystal| PHY wo crystal |No 125Mhz from PHY|
|
|
*| | | 25MHz | 50MHz | |
|
|
* ---------------------------------------------------------------------------
|
|
*| MII | - | eth-ck | n/a | n/a |
|
|
*| | | st,ext-phyclk | | |
|
|
* ---------------------------------------------------------------------------
|
|
*| GMII | - | eth-ck | n/a | n/a |
|
|
*| | | st,ext-phyclk | | |
|
|
* ---------------------------------------------------------------------------
|
|
*| RGMII | - | eth-ck | n/a | eth-ck |
|
|
*| | | st,ext-phyclk | | st,eth-clk-sel or|
|
|
*| | | | | st,ext-phyclk |
|
|
* ---------------------------------------------------------------------------
|
|
*| RMII | - | eth-ck | eth-ck | n/a |
|
|
*| | | st,ext-phyclk | st,eth-ref-clk-sel | |
|
|
*| | | | or st,ext-phyclk | |
|
|
* ---------------------------------------------------------------------------
|
|
*
|
|
*/
|
|
|
|
struct stm32_dwmac {
|
|
struct clk *clk_tx;
|
|
struct clk *clk_rx;
|
|
struct clk *clk_eth_ck;
|
|
struct clk *clk_ethstp;
|
|
struct clk *syscfg_clk;
|
|
int ext_phyclk;
|
|
int enable_eth_ck;
|
|
int eth_clk_sel_reg;
|
|
int eth_ref_clk_sel_reg;
|
|
int irq_pwr_wakeup;
|
|
u32 mode_reg; /* MAC glue-logic mode register */
|
|
struct regmap *regmap;
|
|
u32 speed;
|
|
const struct stm32_ops *ops;
|
|
struct device *dev;
|
|
};
|
|
|
|
struct stm32_ops {
|
|
int (*set_mode)(struct plat_stmmacenet_data *plat_dat);
|
|
int (*suspend)(struct stm32_dwmac *dwmac);
|
|
void (*resume)(struct stm32_dwmac *dwmac);
|
|
int (*parse_data)(struct stm32_dwmac *dwmac,
|
|
struct device *dev);
|
|
u32 syscfg_eth_mask;
|
|
bool clk_rx_enable_in_suspend;
|
|
};
|
|
|
|
static int stm32_dwmac_clk_enable(struct stm32_dwmac *dwmac, bool resume)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(dwmac->clk_tx);
|
|
if (ret)
|
|
goto err_clk_tx;
|
|
|
|
if (!dwmac->ops->clk_rx_enable_in_suspend || !resume) {
|
|
ret = clk_prepare_enable(dwmac->clk_rx);
|
|
if (ret)
|
|
goto err_clk_rx;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dwmac->syscfg_clk);
|
|
if (ret)
|
|
goto err_syscfg_clk;
|
|
|
|
if (dwmac->enable_eth_ck) {
|
|
ret = clk_prepare_enable(dwmac->clk_eth_ck);
|
|
if (ret)
|
|
goto err_clk_eth_ck;
|
|
}
|
|
|
|
return ret;
|
|
|
|
err_clk_eth_ck:
|
|
clk_disable_unprepare(dwmac->syscfg_clk);
|
|
err_syscfg_clk:
|
|
if (!dwmac->ops->clk_rx_enable_in_suspend || !resume)
|
|
clk_disable_unprepare(dwmac->clk_rx);
|
|
err_clk_rx:
|
|
clk_disable_unprepare(dwmac->clk_tx);
|
|
err_clk_tx:
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat, bool resume)
|
|
{
|
|
struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
|
|
int ret;
|
|
|
|
if (dwmac->ops->set_mode) {
|
|
ret = dwmac->ops->set_mode(plat_dat);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return stm32_dwmac_clk_enable(dwmac, resume);
|
|
}
|
|
|
|
static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
|
|
{
|
|
struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
|
|
u32 reg = dwmac->mode_reg, clk_rate;
|
|
int val;
|
|
|
|
clk_rate = clk_get_rate(dwmac->clk_eth_ck);
|
|
dwmac->enable_eth_ck = false;
|
|
switch (plat_dat->mac_interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk)
|
|
dwmac->enable_eth_ck = true;
|
|
val = SYSCFG_PMCR_ETH_SEL_MII;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
|
|
break;
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
val = SYSCFG_PMCR_ETH_SEL_GMII;
|
|
if (clk_rate == ETH_CK_F_25M &&
|
|
(dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
|
|
dwmac->enable_eth_ck = true;
|
|
val |= SYSCFG_PMCR_ETH_CLK_SEL;
|
|
}
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
val = SYSCFG_PMCR_ETH_SEL_RMII;
|
|
if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) &&
|
|
(dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) {
|
|
dwmac->enable_eth_ck = true;
|
|
val |= SYSCFG_PMCR_ETH_REF_CLK_SEL;
|
|
}
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
val = SYSCFG_PMCR_ETH_SEL_RGMII;
|
|
if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) &&
|
|
(dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
|
|
dwmac->enable_eth_ck = true;
|
|
val |= SYSCFG_PMCR_ETH_CLK_SEL;
|
|
}
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RGMII\n");
|
|
break;
|
|
default:
|
|
pr_debug("SYSCFG init : Do not manage %d interface\n",
|
|
plat_dat->mac_interface);
|
|
/* Do not manage others interfaces */
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Need to update PMCCLRR (clear register) */
|
|
regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
|
|
dwmac->ops->syscfg_eth_mask);
|
|
|
|
/* Update PMCSETR (set register) */
|
|
return regmap_update_bits(dwmac->regmap, reg,
|
|
dwmac->ops->syscfg_eth_mask, val);
|
|
}
|
|
|
|
static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
|
|
{
|
|
struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
|
|
u32 reg = dwmac->mode_reg;
|
|
int val;
|
|
|
|
switch (plat_dat->mac_interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
val = SYSCFG_MCU_ETH_SEL_MII;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
val = SYSCFG_MCU_ETH_SEL_RMII;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
|
|
break;
|
|
default:
|
|
pr_debug("SYSCFG init : Do not manage %d interface\n",
|
|
plat_dat->mac_interface);
|
|
/* Do not manage others interfaces */
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(dwmac->regmap, reg,
|
|
dwmac->ops->syscfg_eth_mask, val << 23);
|
|
}
|
|
|
|
static void stm32_dwmac_clk_disable(struct stm32_dwmac *dwmac, bool suspend)
|
|
{
|
|
clk_disable_unprepare(dwmac->clk_tx);
|
|
if (!dwmac->ops->clk_rx_enable_in_suspend || !suspend)
|
|
clk_disable_unprepare(dwmac->clk_rx);
|
|
|
|
clk_disable_unprepare(dwmac->syscfg_clk);
|
|
if (dwmac->enable_eth_ck)
|
|
clk_disable_unprepare(dwmac->clk_eth_ck);
|
|
}
|
|
|
|
static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
|
|
struct device *dev)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
int err;
|
|
|
|
/* Get TX/RX clocks */
|
|
dwmac->clk_tx = devm_clk_get(dev, "mac-clk-tx");
|
|
if (IS_ERR(dwmac->clk_tx)) {
|
|
dev_err(dev, "No ETH Tx clock provided...\n");
|
|
return PTR_ERR(dwmac->clk_tx);
|
|
}
|
|
|
|
dwmac->clk_rx = devm_clk_get(dev, "mac-clk-rx");
|
|
if (IS_ERR(dwmac->clk_rx)) {
|
|
dev_err(dev, "No ETH Rx clock provided...\n");
|
|
return PTR_ERR(dwmac->clk_rx);
|
|
}
|
|
|
|
if (dwmac->ops->parse_data) {
|
|
err = dwmac->ops->parse_data(dwmac, dev);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* Get mode register */
|
|
dwmac->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon");
|
|
if (IS_ERR(dwmac->regmap))
|
|
return PTR_ERR(dwmac->regmap);
|
|
|
|
err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->mode_reg);
|
|
if (err)
|
|
dev_err(dev, "Can't get sysconfig mode offset (%d)\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
|
|
struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct device_node *np = dev->of_node;
|
|
int err = 0;
|
|
|
|
/* Ethernet PHY have no crystal */
|
|
dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk");
|
|
|
|
/* Gigabit Ethernet 125MHz clock selection. */
|
|
dwmac->eth_clk_sel_reg = of_property_read_bool(np, "st,eth-clk-sel");
|
|
|
|
/* Ethernet 50Mhz RMII clock selection */
|
|
dwmac->eth_ref_clk_sel_reg =
|
|
of_property_read_bool(np, "st,eth-ref-clk-sel");
|
|
|
|
/* Get ETH_CLK clocks */
|
|
dwmac->clk_eth_ck = devm_clk_get(dev, "eth-ck");
|
|
if (IS_ERR(dwmac->clk_eth_ck)) {
|
|
dev_info(dev, "No phy clock provided...\n");
|
|
dwmac->clk_eth_ck = NULL;
|
|
}
|
|
|
|
/* Clock used for low power mode */
|
|
dwmac->clk_ethstp = devm_clk_get(dev, "ethstp");
|
|
if (IS_ERR(dwmac->clk_ethstp)) {
|
|
dev_err(dev,
|
|
"No ETH peripheral clock provided for CStop mode ...\n");
|
|
return PTR_ERR(dwmac->clk_ethstp);
|
|
}
|
|
|
|
/* Optional Clock for sysconfig */
|
|
dwmac->syscfg_clk = devm_clk_get(dev, "syscfg-clk");
|
|
if (IS_ERR(dwmac->syscfg_clk))
|
|
dwmac->syscfg_clk = NULL;
|
|
|
|
/* Get IRQ information early to have an ability to ask for deferred
|
|
* probe if needed before we went too far with resource allocation.
|
|
*/
|
|
dwmac->irq_pwr_wakeup = platform_get_irq_byname_optional(pdev,
|
|
"stm32_pwr_wakeup");
|
|
if (dwmac->irq_pwr_wakeup == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
if (!dwmac->clk_eth_ck && dwmac->irq_pwr_wakeup >= 0) {
|
|
err = device_init_wakeup(&pdev->dev, true);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to init wake up irq\n");
|
|
return err;
|
|
}
|
|
err = dev_pm_set_dedicated_wake_irq(&pdev->dev,
|
|
dwmac->irq_pwr_wakeup);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to set wake up irq\n");
|
|
device_init_wakeup(&pdev->dev, false);
|
|
}
|
|
device_set_wakeup_enable(&pdev->dev, false);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int stm32_dwmac_probe(struct platform_device *pdev)
|
|
{
|
|
struct plat_stmmacenet_data *plat_dat;
|
|
struct stmmac_resources stmmac_res;
|
|
struct stm32_dwmac *dwmac;
|
|
const struct stm32_ops *data;
|
|
int ret;
|
|
|
|
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
|
|
if (ret)
|
|
return ret;
|
|
|
|
plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
|
|
if (IS_ERR(plat_dat))
|
|
return PTR_ERR(plat_dat);
|
|
|
|
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
|
|
if (!dwmac)
|
|
return -ENOMEM;
|
|
|
|
data = of_device_get_match_data(&pdev->dev);
|
|
if (!data) {
|
|
dev_err(&pdev->dev, "no of match data provided\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dwmac->ops = data;
|
|
dwmac->dev = &pdev->dev;
|
|
|
|
ret = stm32_dwmac_parse_data(dwmac, &pdev->dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to parse OF data\n");
|
|
return ret;
|
|
}
|
|
|
|
plat_dat->bsp_priv = dwmac;
|
|
|
|
ret = stm32_dwmac_init(plat_dat, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
|
|
if (ret)
|
|
goto err_clk_disable;
|
|
|
|
return 0;
|
|
|
|
err_clk_disable:
|
|
stm32_dwmac_clk_disable(dwmac, false);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void stm32_dwmac_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
struct stm32_dwmac *dwmac = priv->plat->bsp_priv;
|
|
|
|
stmmac_dvr_remove(&pdev->dev);
|
|
|
|
stm32_dwmac_clk_disable(dwmac, false);
|
|
|
|
if (dwmac->irq_pwr_wakeup >= 0) {
|
|
dev_pm_clear_wake_irq(&pdev->dev);
|
|
device_init_wakeup(&pdev->dev, false);
|
|
}
|
|
}
|
|
|
|
static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
|
|
{
|
|
return clk_prepare_enable(dwmac->clk_ethstp);
|
|
}
|
|
|
|
static void stm32mp1_resume(struct stm32_dwmac *dwmac)
|
|
{
|
|
clk_disable_unprepare(dwmac->clk_ethstp);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int stm32_dwmac_suspend(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
struct stm32_dwmac *dwmac = priv->plat->bsp_priv;
|
|
|
|
int ret;
|
|
|
|
ret = stmmac_suspend(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
stm32_dwmac_clk_disable(dwmac, true);
|
|
|
|
if (dwmac->ops->suspend)
|
|
ret = dwmac->ops->suspend(dwmac);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_dwmac_resume(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
struct stm32_dwmac *dwmac = priv->plat->bsp_priv;
|
|
int ret;
|
|
|
|
if (dwmac->ops->resume)
|
|
dwmac->ops->resume(dwmac);
|
|
|
|
ret = stm32_dwmac_init(priv->plat, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = stmmac_resume(dev);
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(stm32_dwmac_pm_ops,
|
|
stm32_dwmac_suspend, stm32_dwmac_resume);
|
|
|
|
static struct stm32_ops stm32mcu_dwmac_data = {
|
|
.set_mode = stm32mcu_set_mode,
|
|
.syscfg_eth_mask = SYSCFG_MCU_ETH_MASK
|
|
};
|
|
|
|
static struct stm32_ops stm32mp1_dwmac_data = {
|
|
.set_mode = stm32mp1_set_mode,
|
|
.suspend = stm32mp1_suspend,
|
|
.resume = stm32mp1_resume,
|
|
.parse_data = stm32mp1_parse_data,
|
|
.syscfg_eth_mask = SYSCFG_MP1_ETH_MASK,
|
|
.clk_rx_enable_in_suspend = true
|
|
};
|
|
|
|
static const struct of_device_id stm32_dwmac_match[] = {
|
|
{ .compatible = "st,stm32-dwmac", .data = &stm32mcu_dwmac_data},
|
|
{ .compatible = "st,stm32mp1-dwmac", .data = &stm32mp1_dwmac_data},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_dwmac_match);
|
|
|
|
static struct platform_driver stm32_dwmac_driver = {
|
|
.probe = stm32_dwmac_probe,
|
|
.remove_new = stm32_dwmac_remove,
|
|
.driver = {
|
|
.name = "stm32-dwmac",
|
|
.pm = &stm32_dwmac_pm_ops,
|
|
.of_match_table = stm32_dwmac_match,
|
|
},
|
|
};
|
|
module_platform_driver(stm32_dwmac_driver);
|
|
|
|
MODULE_AUTHOR("Alexandre Torgue <alexandre.torgue@gmail.com>");
|
|
MODULE_AUTHOR("Christophe Roullier <christophe.roullier@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics STM32 DWMAC Specific Glue layer");
|
|
MODULE_LICENSE("GPL v2");
|