db5d28c0bf
new drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmZEUU0ACgkQDHTzWXnE hr5qMBAAjUFF0w3YOQMsn0LEAm628kMRHpoVeSXmIfO9z9lTyad30EtiS4ggFgj7 Q/oQ6hHCd5jdsvGSJDgtTTAsTQX+aCkXrgf/18ENbqR5mM3MdefUAPR/zawZ7HR4 8+b2h6p7gHBw8wDjuIvQ5e9InHcnIkKWJc82qnJG5Urgxa05SDh3mu3cosPTJiBw a851vlWaYcxC0yAUwJlWaXDdN8yzdFaSQNboZBS/CMLXF/WE6Ht257uxJmaouc0Y Z0kBybok5x0TPQEXF9IV+kuSW3EYpYcwRi0BFFM9sJjkEBdH3rYRZwuYP1LR+7VZ HKsmIkie8YzCm2VwTquYzUvHgF+swZX4RRch9XJlGz7UvBLc0eBO/2n4X6fNd8Kl QGNNqEfsnUQrAHKvGsOUgoGjSCmEo8voGcMZ3JPIAdJ/GcnJwpMvNxtF6XB08hEu rDxuU6o7WkM4dJbtiaFEHNh0Fmjj6aXdBL23UD9pcqPT1fc9cT3xnUd5RJIRuRwV /tpb2WfkFAoxCkKFiunaC4rE8oG6ME6wr/trYjvoYuhCI5hCVaXRBGzJEtC30IP6 lG2YZ8r0jHjktbgjZ0Cz/hY424H4sxSN9SJAnXXFDzcfjBJ/nOgo5nMD1jKajAD5 SYfqWaD5Y+YygtyLJPMfZQI2XMOpCzteXD8uaNXXFJfpV7Apeyg= =ocVM -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ...
950 lines
30 KiB
Text
950 lines
30 KiB
Text
# SPDX-License-Identifier: GPL-2.0-only
|
||
config DRM_PANEL
|
||
bool
|
||
depends on DRM
|
||
help
|
||
Panel registration and lookup framework.
|
||
|
||
menu "Display Panels"
|
||
depends on DRM && DRM_PANEL
|
||
|
||
config DRM_PANEL_ABT_Y030XX067A
|
||
tristate "ABT Y030XX067A 320x480 LCD panel"
|
||
depends on OF && SPI
|
||
select REGMAP_SPI
|
||
help
|
||
Say Y here to enable support for the Asia Better Technology Ltd.
|
||
Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
|
||
and RG-99 handheld gaming consoles.
|
||
|
||
config DRM_PANEL_ARM_VERSATILE
|
||
tristate "ARM Versatile panel driver"
|
||
depends on OF
|
||
depends on MFD_SYSCON
|
||
select VIDEOMODE_HELPERS
|
||
help
|
||
This driver supports the ARM Versatile panels connected to ARM
|
||
reference designs. The panel is detected using special registers
|
||
in the Versatile family syscon registers.
|
||
|
||
config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
|
||
tristate "ASUS Z00T TM5P5 NT35596 panel"
|
||
depends on GPIOLIB && OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the ASUS TMP5P5
|
||
NT35596 1080x1920 video mode panel as found in some Asus
|
||
Zenfone 2 Laser Z00T devices.
|
||
|
||
config DRM_PANEL_AUO_A030JTN01
|
||
tristate "AUO A030JTN01"
|
||
depends on SPI
|
||
select REGMAP_SPI
|
||
help
|
||
Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
|
||
as found in the YLM RS-97 handheld gaming console.
|
||
|
||
config DRM_PANEL_BOE_BF060Y8M_AJ0
|
||
tristate "Boe BF060Y8M-AJ0 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Boe BF060Y8M-AJ0
|
||
5.99" AMOLED modules. The panel has a 1080x2160 resolution and
|
||
uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
|
||
the host and backlight is controlled through DSI commands.
|
||
|
||
config DRM_PANEL_BOE_HIMAX8279D
|
||
tristate "Boe Himax8279d panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Boe Himax8279d
|
||
TFT-LCD modules. The panel has a 1200x1920 resolution and uses
|
||
24 bit RGB per pixel. It provides a MIPI DSI interface to
|
||
the host and has a built-in LED backlight.
|
||
|
||
config DRM_PANEL_BOE_TH101MB31UIG002_28A
|
||
tristate "Boe TH101MB31UIG002-28A panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Boe
|
||
TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
|
||
resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
|
||
interface to the host and has a built-in LED backlight.
|
||
|
||
config DRM_PANEL_BOE_TV101WUM_NL6
|
||
tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
|
||
45NA WUXGA PANEL DSI Video Mode panel
|
||
|
||
config DRM_PANEL_EBBG_FT8719
|
||
tristate "EBBG FT8719 panel driver"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the EBBG FT8719
|
||
video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
|
||
The panel has a resolution of 1080x2246. It provides a MIPI DSI
|
||
interface to the host.
|
||
|
||
config DRM_PANEL_ELIDA_KD35T133
|
||
tristate "Elida KD35T133 panel driver"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Elida
|
||
KD35T133 controller for 320x480 LCD panels with MIPI-DSI
|
||
system interfaces.
|
||
|
||
config DRM_PANEL_FEIXIN_K101_IM2BA02
|
||
tristate "Feixin K101 IM2BA02 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Feixin K101 IM2BA02
|
||
4-lane 800x1280 MIPI DSI panel.
|
||
|
||
config DRM_PANEL_FEIYANG_FY07024DI26A30D
|
||
tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y if you want to enable support for panels based on the
|
||
Feiyang FY07024DI26A30-D MIPI-DSI interface.
|
||
|
||
config DRM_PANEL_DSI_CM
|
||
tristate "Generic DSI command mode panels"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
DRM panel driver for DSI command mode panels with support for
|
||
embedded and external backlights.
|
||
|
||
config DRM_PANEL_LVDS
|
||
tristate "Generic LVDS panel driver"
|
||
depends on OF
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select VIDEOMODE_HELPERS
|
||
help
|
||
This driver supports LVDS panels that don't require device-specific
|
||
handling of power supplies or control signals. It implements automatic
|
||
backlight handling if the panel is attached to a backlight controller.
|
||
|
||
config DRM_PANEL_HIMAX_HX83112A
|
||
tristate "Himax HX83112A-based DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_KMS_HELPER
|
||
help
|
||
Say Y here if you want to enable support for Himax HX83112A-based
|
||
display panels, such as the one found in the Fairphone 4 smartphone.
|
||
|
||
config DRM_PANEL_HIMAX_HX8394
|
||
tristate "HIMAX HX8394 MIPI-DSI LCD panels"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y if you want to enable support for panels based on the
|
||
Himax HX8394 controller, such as the HannStar HSD060BHW4
|
||
720x1440 TFT LCD panel that uses a MIPI-DSI interface.
|
||
|
||
If M is selected the module will be called panel-himax-hx8394.
|
||
|
||
config DRM_PANEL_ILITEK_IL9322
|
||
tristate "Ilitek ILI9322 320x240 QVGA panels"
|
||
depends on OF && SPI
|
||
select REGMAP
|
||
help
|
||
Say Y here if you want to enable support for Ilitek IL9322
|
||
QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
|
||
|
||
config DRM_PANEL_ILITEK_ILI9341
|
||
tristate "Ilitek ILI9341 240x320 QVGA panels"
|
||
depends on SPI
|
||
select DRM_KMS_HELPER
|
||
select DRM_GEM_DMA_HELPER
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_MIPI_DBI
|
||
help
|
||
Say Y here if you want to enable support for Ilitek IL9341
|
||
QVGA (240x320) RGB panels. support serial & parallel rgb
|
||
interface.
|
||
|
||
config DRM_PANEL_ILITEK_ILI9805
|
||
tristate "Ilitek ILI9805-based panels"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y if you want to enable support for panels based on the
|
||
Ilitek ILI9805 controller.
|
||
|
||
config DRM_PANEL_ILITEK_ILI9881C
|
||
tristate "Ilitek ILI9881C-based panels"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y if you want to enable support for panels based on the
|
||
Ilitek ILI9881c controller.
|
||
|
||
config DRM_PANEL_ILITEK_ILI9882T
|
||
tristate "Ilitek ILI9882t-based panels"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y if you want to enable support for panels based on the
|
||
Ilitek ILI9882t controller.
|
||
|
||
config DRM_PANEL_INNOLUX_EJ030NA
|
||
tristate "Innolux EJ030NA 320x480 LCD panel"
|
||
depends on OF && SPI
|
||
select REGMAP_SPI
|
||
help
|
||
Say Y here to enable support for the Innolux/Chimei EJ030NA
|
||
320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
|
||
and LDK handheld gaming consoles.
|
||
|
||
config DRM_PANEL_INNOLUX_P079ZCA
|
||
tristate "Innolux P079ZCA panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Innolux P079ZCA
|
||
TFT-LCD modules. The panel has a 1024x768 resolution and uses
|
||
24 bit RGB per pixel. It provides a MIPI DSI interface to
|
||
the host and has a built-in LED backlight.
|
||
|
||
config DRM_PANEL_JADARD_JD9365DA_H3
|
||
tristate "Jadard JD9365DA-H3 WXGA DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Jadard JD9365DA-H3
|
||
WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
|
||
800RGBx1280 dots at maximum.
|
||
|
||
config DRM_PANEL_JDI_LPM102A188A
|
||
tristate "JDI LPM102A188A DSI panel"
|
||
depends on OF && GPIOLIB
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for JDI LPM102A188A DSI
|
||
command mode panel as found in Google Pixel C devices.
|
||
The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
|
||
to the host.
|
||
|
||
config DRM_PANEL_JDI_LT070ME05000
|
||
tristate "JDI LT070ME05000 WUXGA DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for JDI DSI video mode
|
||
panel as found in Google Nexus 7 (2013) devices.
|
||
The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
|
||
24 bit per pixel.
|
||
|
||
config DRM_PANEL_JDI_R63452
|
||
tristate "JDI R63452 Full HD DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the JDI R63452
|
||
DSI command mode panel as found in Xiaomi Mi 5 Devices.
|
||
|
||
config DRM_PANEL_KHADAS_TS050
|
||
tristate "Khadas TS050 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Khadas TS050 TFT-LCD
|
||
panel module. The panel has a 1080x1920 resolution and uses
|
||
24 bit RGB per pixel. It provides a MIPI DSI interface to
|
||
the host, a built-in LED backlight and touch controller.
|
||
|
||
config DRM_PANEL_KINGDISPLAY_KD097D04
|
||
tristate "Kingdisplay kd097d04 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Kingdisplay kd097d04
|
||
TFT-LCD modules. The panel has a 1536x2048 resolution and uses
|
||
24 bit RGB per pixel. It provides a MIPI DSI interface to
|
||
the host and has a built-in LED backlight.
|
||
|
||
config DRM_PANEL_LEADTEK_LTK050H3146W
|
||
tristate "Leadtek LTK050H3146W panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Leadtek LTK050H3146W
|
||
TFT-LCD modules. The panel has a 720x1280 resolution and uses
|
||
24 bit RGB per pixel. It provides a MIPI DSI interface to
|
||
the host and has a built-in LED backlight.
|
||
|
||
config DRM_PANEL_LEADTEK_LTK500HD1829
|
||
tristate "Leadtek LTK500HD1829 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Kingdisplay kd097d04
|
||
TFT-LCD modules. The panel has a 1536x2048 resolution and uses
|
||
24 bit RGB per pixel. It provides a MIPI DSI interface to
|
||
the host and has a built-in LED backlight.
|
||
|
||
config DRM_PANEL_LG_LB035Q02
|
||
tristate "LG LB035Q024573 RGB panel"
|
||
depends on GPIOLIB && OF && SPI
|
||
help
|
||
Say Y here if you want to enable support for the LB035Q02 RGB panel
|
||
(found on the Gumstix Overo Palo35 board). To compile this driver as
|
||
a module, choose M here.
|
||
|
||
config DRM_PANEL_LG_LG4573
|
||
tristate "LG4573 RGB/SPI panel"
|
||
depends on OF && SPI
|
||
select VIDEOMODE_HELPERS
|
||
help
|
||
Say Y here if you want to enable support for LG4573 RGB panel.
|
||
To compile this driver as a module, choose M here.
|
||
|
||
config DRM_PANEL_LG_SW43408
|
||
tristate "LG SW43408 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for LG sw43408 panel.
|
||
The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
|
||
pixel. It provides a MIPI DSI interface to the host and has a
|
||
built-in LED backlight.
|
||
|
||
config DRM_PANEL_MAGNACHIP_D53E6EA8966
|
||
tristate "Magnachip D53E6EA8966 DSI panel"
|
||
depends on OF && SPI
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_MIPI_DBI
|
||
help
|
||
DRM panel driver for the Samsung AMS495QA01 panel controlled
|
||
with the Magnachip D53E6EA8966 panel IC. This panel receives
|
||
video data via DSI but commands via 9-bit SPI using DBI.
|
||
|
||
config DRM_PANEL_MANTIX_MLAF057WE51
|
||
tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Mantix
|
||
MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
|
||
has a resolution of 720x1440 pixels, a built in backlight and touch
|
||
controller.
|
||
|
||
config DRM_PANEL_NEC_NL8048HL11
|
||
tristate "NEC NL8048HL11 RGB panel"
|
||
depends on GPIOLIB && OF && SPI
|
||
help
|
||
Say Y here if you want to enable support for the NEC NL8048HL11 RGB
|
||
panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
|
||
as a module, choose M here.
|
||
|
||
config DRM_PANEL_NEWVISION_NV3051D
|
||
tristate "NewVision NV3051D DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
This driver supports the NV3051D based panel found on the Anbernic
|
||
RG353P and RG353V.
|
||
|
||
config DRM_PANEL_NEWVISION_NV3052C
|
||
tristate "NewVision NV3052C RGB/SPI panel"
|
||
depends on OF && SPI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_MIPI_DBI
|
||
help
|
||
Say Y here if you want to enable support for the panels built
|
||
around the NewVision NV3052C display controller.
|
||
|
||
config DRM_PANEL_NOVATEK_NT35510
|
||
tristate "Novatek NT35510 RGB panel driver"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the panels built
|
||
around the Novatek NT35510 display controller, such as some
|
||
Hydis panels.
|
||
|
||
config DRM_PANEL_NOVATEK_NT35560
|
||
tristate "Novatek NT35560 DSI command mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select VIDEOMODE_HELPERS
|
||
help
|
||
Say Y here if you want to enable the Novatek NT35560 display
|
||
controller. This panel supports DSI in both command and video
|
||
mode. This supports several panels such as Sony ACX424AKM and
|
||
ACX424AKP.
|
||
|
||
config DRM_PANEL_NOVATEK_NT35950
|
||
tristate "Novatek NT35950 DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the panels built
|
||
around the Novatek NT35950 display controller, such as some
|
||
Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
|
||
mobile phones.
|
||
|
||
config DRM_PANEL_NOVATEK_NT36523
|
||
tristate "Novatek NT36523 panel driver"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the panels built
|
||
around the Novatek NT36523 display controller, such as some
|
||
Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
|
||
|
||
config DRM_PANEL_NOVATEK_NT36672A
|
||
tristate "Novatek NT36672A DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the panels built
|
||
around the Novatek NT36672A display controller, such as some
|
||
Tianma panels used in a few Xiaomi Poco F1 mobile phones.
|
||
|
||
config DRM_PANEL_NOVATEK_NT36672E
|
||
tristate "Novatek NT36672E DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
|
||
LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
|
||
RGB per pixel.
|
||
|
||
config DRM_PANEL_NOVATEK_NT39016
|
||
tristate "Novatek NT39016 RGB/SPI panel"
|
||
depends on OF && SPI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select REGMAP_SPI
|
||
help
|
||
Say Y here if you want to enable support for the panels built
|
||
around the Novatek NT39016 display controller.
|
||
|
||
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
|
||
tristate "Olimex LCD-OLinuXino panel"
|
||
depends on OF
|
||
depends on I2C
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select CRC32
|
||
help
|
||
The panel is used with different sizes LCDs, from 480x272 to
|
||
1280x800, and 24 bit per pixel.
|
||
|
||
Say Y here if you want to enable support for Olimex Ltd.
|
||
LCD-OLinuXino panel.
|
||
|
||
config DRM_PANEL_ORISETECH_OTA5601A
|
||
tristate "Orise Technology ota5601a RGB/SPI panel"
|
||
depends on SPI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select REGMAP_SPI
|
||
help
|
||
Say Y here if you want to enable support for the panels built
|
||
around the Orise Technology OTA9601A display controller.
|
||
|
||
config DRM_PANEL_ORISETECH_OTM8009A
|
||
tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Orise Technology
|
||
otm8009a 480x800 dsi 2dl panel.
|
||
|
||
config DRM_PANEL_OSD_OSD101T2587_53TS
|
||
tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for One Stop Displays
|
||
OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
|
||
|
||
config DRM_PANEL_PANASONIC_VVX10F034N00
|
||
tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Panasonic VVX10F034N00
|
||
WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
|
||
Xperia Z2 tablets
|
||
|
||
config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
|
||
tristate "Raspberry Pi 7-inch touchscreen panel"
|
||
depends on DRM_MIPI_DSI
|
||
help
|
||
Say Y here if you want to enable support for the Raspberry
|
||
Pi 7" Touchscreen. To compile this driver as a module,
|
||
choose M here.
|
||
|
||
config DRM_PANEL_RAYDIUM_RM67191
|
||
tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Raydium RM67191 FHD
|
||
(1080x1920) DSI panel.
|
||
|
||
config DRM_PANEL_RAYDIUM_RM68200
|
||
tristate "Raydium RM68200 720x1280 DSI video mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Raydium RM68200
|
||
720x1280 DSI video mode panel.
|
||
|
||
config DRM_PANEL_RAYDIUM_RM692E5
|
||
tristate "Raydium RM692E5-based DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_DISPLAY_DP_HELPER
|
||
select DRM_DISPLAY_HELPER
|
||
help
|
||
Say Y here if you want to enable support for Raydium RM692E5-based
|
||
display panels, such as the one found in the Fairphone 5 smartphone.
|
||
|
||
config DRM_PANEL_RAYDIUM_RM69380
|
||
tristate "Raydium RM69380-based DSI panel"
|
||
depends on OF && GPIOLIB
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Raydium RM69380-based
|
||
display panels.
|
||
|
||
This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
|
||
in combination with an EDO OLED panel.
|
||
|
||
config DRM_PANEL_RONBO_RB070D30
|
||
tristate "Ronbo Electronics RB070D30 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Ronbo Electronics
|
||
RB070D30 1024x600 DSI panel.
|
||
|
||
config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
|
||
tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
|
||
depends on OF
|
||
select DRM_MIPI_DSI
|
||
select VIDEOMODE_HELPERS
|
||
|
||
config DRM_PANEL_SAMSUNG_ATNA33XC20
|
||
tristate "Samsung ATNA33XC20 eDP panel"
|
||
depends on OF
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
depends on PM
|
||
select DRM_DISPLAY_DP_HELPER
|
||
select DRM_DISPLAY_HELPER
|
||
select DRM_DISPLAY_DP_AUX_BUS
|
||
help
|
||
DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
|
||
be handled by the DRM_PANEL_SIMPLE driver because its power
|
||
sequencing is non-standard.
|
||
|
||
config DRM_PANEL_SAMSUNG_DB7430
|
||
tristate "Samsung DB7430-based DPI panels"
|
||
depends on OF && SPI && GPIOLIB
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_MIPI_DBI
|
||
help
|
||
Say Y here if you want to enable support for the Samsung
|
||
DB7430 DPI display controller used in such devices as the
|
||
LMS397KF04 480x800 DPI panel.
|
||
|
||
config DRM_PANEL_SAMSUNG_LD9040
|
||
tristate "Samsung LD9040 RGB/SPI panel"
|
||
depends on OF && SPI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select VIDEOMODE_HELPERS
|
||
|
||
config DRM_PANEL_SAMSUNG_S6E3FA7
|
||
tristate "Samsung S6E3FA7 panel driver"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Samsung S6E3FA7
|
||
1920x2220 panel.
|
||
|
||
config DRM_PANEL_SAMSUNG_S6D16D0
|
||
tristate "Samsung S6D16D0 DSI video mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
select VIDEOMODE_HELPERS
|
||
|
||
config DRM_PANEL_SAMSUNG_S6D27A1
|
||
tristate "Samsung S6D27A1 DPI panel driver"
|
||
depends on OF && SPI && GPIOLIB
|
||
select DRM_MIPI_DBI
|
||
help
|
||
Say Y here if you want to enable support for the Samsung
|
||
S6D27A1 DPI 480x800 panel.
|
||
|
||
This panel can be found in Samsung Galaxy Ace 2
|
||
GT-I8160 mobile phone.
|
||
|
||
config DRM_PANEL_SAMSUNG_S6D7AA0
|
||
tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
|
||
depends on OF
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_MIPI_DSI
|
||
select VIDEOMODE_HELPERS
|
||
|
||
config DRM_PANEL_SAMSUNG_S6E3HA2
|
||
tristate "Samsung S6E3HA2 DSI video mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select VIDEOMODE_HELPERS
|
||
|
||
config DRM_PANEL_SAMSUNG_S6E63J0X03
|
||
tristate "Samsung S6E63J0X03 DSI command mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select VIDEOMODE_HELPERS
|
||
|
||
config DRM_PANEL_SAMSUNG_S6E63M0
|
||
tristate "Samsung S6E63M0 RGB panel"
|
||
depends on OF
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Samsung S6E63M0
|
||
AMOLED LCD panel. This panel can be accessed using SPI or
|
||
DSI.
|
||
|
||
config DRM_PANEL_SAMSUNG_S6E63M0_SPI
|
||
tristate "Samsung S6E63M0 RGB SPI interface"
|
||
depends on SPI
|
||
depends on DRM_PANEL_SAMSUNG_S6E63M0
|
||
default DRM_PANEL_SAMSUNG_S6E63M0
|
||
select DRM_MIPI_DBI
|
||
help
|
||
Say Y here if you want to be able to access the Samsung
|
||
S6E63M0 panel using SPI.
|
||
|
||
config DRM_PANEL_SAMSUNG_S6E63M0_DSI
|
||
tristate "Samsung S6E63M0 RGB DSI interface"
|
||
depends on DRM_MIPI_DSI
|
||
depends on DRM_PANEL_SAMSUNG_S6E63M0
|
||
help
|
||
Say Y here if you want to be able to access the Samsung
|
||
S6E63M0 panel using DSI.
|
||
|
||
config DRM_PANEL_SAMSUNG_S6E8AA0
|
||
tristate "Samsung S6E8AA0 DSI video mode panel"
|
||
depends on OF
|
||
select DRM_MIPI_DSI
|
||
select VIDEOMODE_HELPERS
|
||
|
||
config DRM_PANEL_SAMSUNG_SOFEF00
|
||
tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select VIDEOMODE_HELPERS
|
||
help
|
||
Say Y or M here if you want to enable support for the Samsung AMOLED
|
||
command mode panels found in the OnePlus 6/6T smartphones.
|
||
|
||
The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
|
||
|
||
config DRM_PANEL_SEIKO_43WVF1G
|
||
tristate "Seiko 43WVF1G panel"
|
||
depends on OF
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select VIDEOMODE_HELPERS
|
||
help
|
||
Say Y here if you want to enable support for the Seiko
|
||
43WVF1G controller for 800x480 LCD panels
|
||
|
||
config DRM_PANEL_SHARP_LQ101R1SX01
|
||
tristate "Sharp LQ101R1SX01 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Sharp LQ101R1SX01
|
||
TFT-LCD modules. The panel has a 2560x1600 resolution and uses
|
||
24 bit RGB per pixel. It provides a dual MIPI DSI interface to
|
||
the host and has a built-in LED backlight.
|
||
|
||
To compile this driver as a module, choose M here: the module
|
||
will be called panel-sharp-lq101r1sx01.
|
||
|
||
config DRM_PANEL_SHARP_LS037V7DW01
|
||
tristate "Sharp LS037V7DW01 VGA LCD panel"
|
||
depends on GPIOLIB && OF && REGULATOR
|
||
help
|
||
Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
|
||
(480x640) LCD panel (found on the TI SDP3430 board).
|
||
|
||
config DRM_PANEL_SHARP_LS043T1LE01
|
||
tristate "Sharp LS043T1LE01 qHD video mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
|
||
(540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
|
||
|
||
config DRM_PANEL_SHARP_LS060T1SX01
|
||
tristate "Sharp LS060T1SX01 FullHD video mode panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
|
||
FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
|
||
Bundle.
|
||
|
||
config DRM_PANEL_SITRONIX_ST7701
|
||
tristate "Sitronix ST7701 panel driver"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Sitronix
|
||
ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
|
||
system interfaces.
|
||
|
||
config DRM_PANEL_SITRONIX_ST7703
|
||
tristate "Sitronix ST7703 based MIPI touchscreen panels"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Sitronix ST7703 based
|
||
panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
|
||
the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
|
||
in backlight and touch controller.
|
||
Touch input support is provided by the goodix driver and needs to be
|
||
selected separately.
|
||
|
||
config DRM_PANEL_SITRONIX_ST7789V
|
||
tristate "Sitronix ST7789V panel"
|
||
depends on OF && SPI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Sitronix
|
||
ST7789V controller for 240x320 LCD panels
|
||
|
||
config DRM_PANEL_SONY_ACX565AKM
|
||
tristate "Sony ACX565AKM panel"
|
||
depends on GPIOLIB && OF && SPI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Sony ACX565AKM
|
||
800x600 3.5" panel (found on the Nokia N900).
|
||
|
||
config DRM_PANEL_SONY_TD4353_JDI
|
||
tristate "Sony TD4353 JDI panel"
|
||
depends on GPIOLIB && OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Sony Tama
|
||
TD4353 JDI command mode panel as found on some Sony Xperia
|
||
XZ2 and XZ2 Compact smartphones.
|
||
|
||
config DRM_PANEL_SONY_TULIP_TRULY_NT35521
|
||
tristate "Sony Tulip Truly NT35521 panel"
|
||
depends on GPIOLIB && OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Sony Tulip
|
||
NT35521 1280x720 video mode panel as found on Sony Xperia M4
|
||
Aqua phone.
|
||
|
||
config DRM_PANEL_STARTEK_KD070FHFID015
|
||
tristate "STARTEK KD070FHFID015 panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
|
||
based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
|
||
with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
|
||
the host, a built-in LED backlight and touch controller.
|
||
|
||
config DRM_PANEL_EDP
|
||
tristate "support for simple Embedded DisplayPort panels"
|
||
depends on OF
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
depends on PM
|
||
select VIDEOMODE_HELPERS
|
||
select DRM_DISPLAY_DP_HELPER
|
||
select DRM_DISPLAY_HELPER
|
||
select DRM_DISPLAY_DP_AUX_BUS
|
||
select DRM_KMS_HELPER
|
||
help
|
||
DRM panel driver for dumb eDP panels that need at most a regulator and
|
||
a GPIO to be powered up. Optionally a backlight can be attached so
|
||
that it can be automatically turned off when the panel goes into a
|
||
low power state.
|
||
|
||
config DRM_PANEL_SIMPLE
|
||
tristate "support for simple panels (other than eDP ones)"
|
||
depends on OF
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
depends on PM
|
||
select VIDEOMODE_HELPERS
|
||
help
|
||
DRM panel driver for dumb non-eDP panels that need at most a regulator
|
||
and a GPIO to be powered up. Optionally a backlight can be attached so
|
||
that it can be automatically turned off when the panel goes into a
|
||
low power state.
|
||
|
||
config DRM_PANEL_SYNAPTICS_R63353
|
||
tristate "Synaptics R63353-based panels"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y if you want to enable support for panels based on the
|
||
Synaptics R63353 controller.
|
||
|
||
config DRM_PANEL_TDO_TL070WSH30
|
||
tristate "TDO TL070WSH30 DSI panel"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
|
||
panel module. The panel has a 1024×600 resolution and uses
|
||
24 bit RGB per pixel. It provides a MIPI DSI interface to
|
||
the host, a built-in LED backlight and touch controller.
|
||
|
||
config DRM_PANEL_TPO_TD028TTEC1
|
||
tristate "Toppoly (TPO) TD028TTEC1 panel driver"
|
||
depends on OF && SPI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for TPO TD028TTEC1 480x640
|
||
2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
|
||
|
||
config DRM_PANEL_TPO_TD043MTEA1
|
||
tristate "Toppoly (TPO) TD043MTEA1 panel driver"
|
||
depends on GPIOLIB && OF && REGULATOR && SPI
|
||
help
|
||
Say Y here if you want to enable support for TPO TD043MTEA1 800x480
|
||
4.3" panel (found on the OMAP3 Pandora board).
|
||
|
||
config DRM_PANEL_TPO_TPG110
|
||
tristate "TPO TPG 800x400 panel"
|
||
depends on OF && SPI && GPIOLIB
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for TPO TPG110
|
||
400CH LTPS TFT LCD Single Chip Digital Driver for up to
|
||
800x400 LCD panels.
|
||
|
||
config DRM_PANEL_TRULY_NT35597_WQXGA
|
||
tristate "Truly WQXGA"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
help
|
||
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
|
||
Video Mode panel
|
||
|
||
config DRM_PANEL_VISIONOX_R66451
|
||
tristate "Visionox R66451"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_DISPLAY_DP_HELPER
|
||
select DRM_DISPLAY_HELPER
|
||
help
|
||
Say Y here if you want to enable support for Visionox
|
||
R66451 1080x2340 AMOLED DSI panel.
|
||
|
||
config DRM_PANEL_VISIONOX_RM69299
|
||
tristate "Visionox RM69299"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
help
|
||
Say Y here if you want to enable support for Visionox
|
||
RM69299 DSI Video Mode panel.
|
||
|
||
config DRM_PANEL_VISIONOX_VTDR6130
|
||
tristate "Visionox VTDR6130"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for Visionox
|
||
VTDR6130 1080x2400 AMOLED DSI panel.
|
||
|
||
config DRM_PANEL_WIDECHIPS_WS2401
|
||
tristate "Widechips WS2401 DPI panel driver"
|
||
depends on SPI && GPIOLIB
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
select DRM_MIPI_DBI
|
||
help
|
||
Say Y here if you want to enable support for the Widechips WS2401 DPI
|
||
480x800 display controller used in panels such as Samsung LMS380KF01.
|
||
This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
|
||
|
||
config DRM_PANEL_XINPENG_XPP055C272
|
||
tristate "Xinpeng XPP055C272 panel driver"
|
||
depends on OF
|
||
depends on DRM_MIPI_DSI
|
||
depends on BACKLIGHT_CLASS_DEVICE
|
||
help
|
||
Say Y here if you want to enable support for the Xinpeng
|
||
XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
|
||
system interfaces.
|
||
endmenu
|