1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
linux/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
Thomas Zimmermann 8ab59da26b drm/fb-helper: Move generic fbdev emulation into separate source file
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.

v3:
	* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
	* rebase onto vmwgfx changes
	* rebase onto xlnx changes
	* fix include statements in amdgpu

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
2022-11-05 17:12:04 +01:00

379 lines
9.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
// Copyright 2018 IBM Corporation
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_device.h>
#include <drm/drm_fbdev_generic.h>
#include <drm/drm_gem_dma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_module.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_simple_kms_helper.h>
#include <drm/drm_vblank.h>
#include <drm/drm_drv.h>
#include "aspeed_gfx.h"
/**
* DOC: ASPEED GFX Driver
*
* This driver is for the ASPEED BMC SoC's 'GFX' display hardware, also called
* the 'SOC Display Controller' in the datasheet. This driver runs on the ARM
* based BMC systems, unlike the ast driver which runs on a host CPU and is for
* a PCIe graphics device.
*
* The AST2500 supports a total of 3 output paths:
*
* 1. VGA output, the output target can choose either or both to the DAC
* or DVO interface.
*
* 2. Graphics CRT output, the output target can choose either or both to
* the DAC or DVO interface.
*
* 3. Video input from DVO, the video input can be used for video engine
* capture or DAC display output.
*
* Output options are selected in SCU2C.
*
* The "VGA mode" device is the PCI attached controller. The "Graphics CRT"
* is the ARM's internal display controller.
*
* The driver only supports a simple configuration consisting of a 40MHz
* pixel clock, fixed by hardware limitations, and the VGA output path.
*
* The driver was written with the 'AST2500 Software Programming Guide' v17,
* which is available under NDA from ASPEED.
*/
struct aspeed_gfx_config {
u32 dac_reg; /* DAC register in SCU */
u32 int_clear_reg; /* Interrupt clear register */
u32 vga_scratch_reg; /* VGA scratch register in SCU */
u32 throd_val; /* Default Threshold Seting */
u32 scan_line_max; /* Max memory size of one scan line */
};
static const struct aspeed_gfx_config ast2400_config = {
.dac_reg = 0x2c,
.int_clear_reg = 0x60,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
.scan_line_max = 64,
};
static const struct aspeed_gfx_config ast2500_config = {
.dac_reg = 0x2c,
.int_clear_reg = 0x60,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
.scan_line_max = 128,
};
static const struct aspeed_gfx_config ast2600_config = {
.dac_reg = 0xc0,
.int_clear_reg = 0x68,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
.scan_line_max = 128,
};
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
{ .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
.fb_create = drm_gem_fb_create,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
{
int ret;
ret = drmm_mode_config_init(drm);
if (ret)
return ret;
drm->mode_config.min_width = 0;
drm->mode_config.min_height = 0;
drm->mode_config.max_width = 800;
drm->mode_config.max_height = 600;
drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
return ret;
}
static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
{
struct drm_device *drm = data;
struct aspeed_gfx *priv = to_aspeed_gfx(drm);
u32 reg;
reg = readl(priv->base + CRT_CTRL1);
if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
drm_crtc_handle_vblank(&priv->pipe.crtc);
writel(reg, priv->base + priv->int_clr_reg);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static int aspeed_gfx_load(struct drm_device *drm)
{
struct platform_device *pdev = to_platform_device(drm->dev);
struct aspeed_gfx *priv = to_aspeed_gfx(drm);
struct device_node *np = pdev->dev.of_node;
const struct aspeed_gfx_config *config;
const struct of_device_id *match;
struct resource *res;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(drm->dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
match = of_match_device(aspeed_gfx_match, &pdev->dev);
if (!match)
return -EINVAL;
config = match->data;
priv->dac_reg = config->dac_reg;
priv->int_clr_reg = config->int_clear_reg;
priv->vga_scratch_reg = config->vga_scratch_reg;
priv->throd_val = config->throd_val;
priv->scan_line_max = config->scan_line_max;
priv->scu = syscon_regmap_lookup_by_phandle(np, "syscon");
if (IS_ERR(priv->scu)) {
priv->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2500-scu");
if (IS_ERR(priv->scu)) {
dev_err(&pdev->dev, "failed to find SCU regmap\n");
return PTR_ERR(priv->scu);
}
}
ret = of_reserved_mem_device_init(drm->dev);
if (ret) {
dev_err(&pdev->dev,
"failed to initialize reserved mem: %d\n", ret);
return ret;
}
ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(&pdev->dev, "failed to set DMA mask: %d\n", ret);
return ret;
}
priv->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (IS_ERR(priv->rst)) {
dev_err(&pdev->dev,
"missing or invalid reset controller device tree entry");
return PTR_ERR(priv->rst);
}
reset_control_deassert(priv->rst);
priv->clk = devm_clk_get(drm->dev, NULL);
if (IS_ERR(priv->clk)) {
dev_err(&pdev->dev,
"missing or invalid clk device tree entry");
return PTR_ERR(priv->clk);
}
clk_prepare_enable(priv->clk);
/* Sanitize control registers */
writel(0, priv->base + CRT_CTRL1);
writel(0, priv->base + CRT_CTRL2);
ret = aspeed_gfx_setup_mode_config(drm);
if (ret < 0)
return ret;
ret = drm_vblank_init(drm, 1);
if (ret < 0) {
dev_err(drm->dev, "Failed to initialise vblank\n");
return ret;
}
ret = aspeed_gfx_create_output(drm);
if (ret < 0) {
dev_err(drm->dev, "Failed to create outputs\n");
return ret;
}
ret = aspeed_gfx_create_pipe(drm);
if (ret < 0) {
dev_err(drm->dev, "Cannot setup simple display pipe\n");
return ret;
}
ret = devm_request_irq(drm->dev, platform_get_irq(pdev, 0),
aspeed_gfx_irq_handler, 0, "aspeed gfx", drm);
if (ret < 0) {
dev_err(drm->dev, "Failed to install IRQ handler\n");
return ret;
}
drm_mode_config_reset(drm);
return 0;
}
static void aspeed_gfx_unload(struct drm_device *drm)
{
drm_kms_helper_poll_fini(drm);
}
DEFINE_DRM_GEM_DMA_FOPS(fops);
static const struct drm_driver aspeed_gfx_driver = {
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
DRM_GEM_DMA_DRIVER_OPS,
.fops = &fops,
.name = "aspeed-gfx-drm",
.desc = "ASPEED GFX DRM",
.date = "20180319",
.major = 1,
.minor = 0,
};
static ssize_t dac_mux_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct aspeed_gfx *priv = dev_get_drvdata(dev);
u32 val;
int rc;
rc = kstrtou32(buf, 0, &val);
if (rc)
return rc;
if (val > 3)
return -EINVAL;
rc = regmap_update_bits(priv->scu, priv->dac_reg, 0x30000, val << 16);
if (rc < 0)
return 0;
return count;
}
static ssize_t dac_mux_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aspeed_gfx *priv = dev_get_drvdata(dev);
u32 reg;
int rc;
rc = regmap_read(priv->scu, priv->dac_reg, &reg);
if (rc)
return rc;
return sprintf(buf, "%u\n", (reg >> 16) & 0x3);
}
static DEVICE_ATTR_RW(dac_mux);
static ssize_t
vga_pw_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aspeed_gfx *priv = dev_get_drvdata(dev);
u32 reg;
int rc;
rc = regmap_read(priv->scu, priv->vga_scratch_reg, &reg);
if (rc)
return rc;
return sprintf(buf, "%u\n", reg);
}
static DEVICE_ATTR_RO(vga_pw);
static struct attribute *aspeed_sysfs_entries[] = {
&dev_attr_vga_pw.attr,
&dev_attr_dac_mux.attr,
NULL,
};
static struct attribute_group aspeed_sysfs_attr_group = {
.attrs = aspeed_sysfs_entries,
};
static int aspeed_gfx_probe(struct platform_device *pdev)
{
struct aspeed_gfx *priv;
int ret;
priv = devm_drm_dev_alloc(&pdev->dev, &aspeed_gfx_driver,
struct aspeed_gfx, drm);
if (IS_ERR(priv))
return PTR_ERR(priv);
ret = aspeed_gfx_load(&priv->drm);
if (ret)
return ret;
platform_set_drvdata(pdev, priv);
ret = sysfs_create_group(&pdev->dev.kobj, &aspeed_sysfs_attr_group);
if (ret)
return ret;
ret = drm_dev_register(&priv->drm, 0);
if (ret)
goto err_unload;
drm_fbdev_generic_setup(&priv->drm, 32);
return 0;
err_unload:
sysfs_remove_group(&pdev->dev.kobj, &aspeed_sysfs_attr_group);
aspeed_gfx_unload(&priv->drm);
return ret;
}
static int aspeed_gfx_remove(struct platform_device *pdev)
{
struct drm_device *drm = platform_get_drvdata(pdev);
sysfs_remove_group(&pdev->dev.kobj, &aspeed_sysfs_attr_group);
drm_dev_unregister(drm);
aspeed_gfx_unload(drm);
return 0;
}
static struct platform_driver aspeed_gfx_platform_driver = {
.probe = aspeed_gfx_probe,
.remove = aspeed_gfx_remove,
.driver = {
.name = "aspeed_gfx",
.of_match_table = aspeed_gfx_match,
},
};
drm_module_platform_driver(aspeed_gfx_platform_driver);
MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>");
MODULE_DESCRIPTION("ASPEED BMC DRM/KMS driver");
MODULE_LICENSE("GPL");