Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer High Flow USB flow sensor, which communicates through a
proprietary USB HID protocol. This commit also adds support for the sensors
of the MPS Flow devices, as they have the same USB product ID and sensor
layouts. Implemented by Leonard Anderweit [1].
Internal and external temp sensor readings are available, along with
the flow sensor.
Additionally, serial number and firmware version are exposed through
debugfs.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/90
Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231016083559.139341-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for LTC2991 Octal I2C Voltage, Current, and Temperature
Monitor.
The LTC2991 is used to monitor system temperatures, voltages and
currents. Through the I2C serial interface, the eight monitors can
individually measure supply voltages and can be paired for
differential measurements of current sense resistors or temperature
sensing transistors. Additional measurements include internal
temperature and internal VCC.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231026103413.27800-2-antoniu.miclaus@analog.com
[groeck: Fixed up documentation warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the specific fault code when 10 bit addresses cannot be
supported. It is used for years, only the documentation slipped through
the cracks.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This property configures the Aspeed watchdog timer's reset mask, which
controls which peripherals are reset when the watchdog timer expires.
Some platforms require that certain devices be left untouched across a
reboot; aspeed,reset-mask can now be used to express such constraints.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230922104231.1434-5-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add compatibles for the MSM8226 and MSM8974 platforms to the Qualcomm
watchdog binding.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231011-msm8226-msm8974-watchdog-v1-1-2c472818fbce@z3ntu.xyz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The wdog may generate wdog_any external reset if the int_en bit is
configured, so add a property for this purpose in dt-binding doc.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231010081909.2899101-2-ping.bai@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The SCU Key controller can be used as a system wakeup source.
Document the 'wakeup-source' property.
This fixes the following schema warning:
system-controller: keys: 'wakeup-source' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230926122957.341094-1-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Move Xilinx IRQ definitions to a common header shared by pcie-xilinx-cpm
and xilinx-xdma (Thippeswamy Havalige)
- Add Xilinx XDMA driver and DT schema (Thippeswamy Havalige)
* pci/controller/xilinx-xdma:
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
- Drop xilinx-nwl updates of bridge bus number fields, since PCI core
already does that (Thippeswamy Havalige)
- Update xilinx-nwl driver and ECAM size in devicetree example to allow up
to 256 buses (Thippeswamy Havalige)
* pci/controller/xilinx-ecam:
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
Here are some very small driver fixes for 6.6-final that have shown up
in the past 2 weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZTy13A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykHzACdHeaGvszwWwcjHX0SmZBRNbHoj80AnRaM0RP0
SpAvYj7k79XtxOH0KTe0
=y5Zi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
Add ti,ina237 binding to ti,ina2xx as they are very similar and may
share the same properties.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231026-ina237-v2-2-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Only the temp sensors that I can verify are present.
T_Sensor is the temperature reading of a 10kΩ β=3435K NTC thermistor
optionally connected to the T_SENSOR header.
The other sensors are as found on the X670E Hero.
Signed-off-by: Ellie Hermaszewska <kernel@monoid.al>
Link: https://lore.kernel.org/r/20231026104332.906357-1-kernel@monoid.al
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA3221 has a critical alert pin that can be controlled by the
summation control function. This function adds the single
shunt-voltage conversions for the desired channels in order to
compare the combined sum to the programmed limit. The Shunt-Voltage
Sum Limit register contains the programmed value that is compared
to the value in the Shunt-Voltage Sum register in order to
determine if the total summed limit is exceeded. If the
shunt-voltage sum limit value is exceeded, the critical alert pin
pulls low.
For the summation limit to have a meaningful value, it is necessary
to use the same shunt-resistor value on all included channels. Add a new
vendor specific property, 'ti,summation-disable', to allow specific
channels to be excluded from the summation control function if the shunt
resistor is different to other channels or the channel should not be
considered for triggering the critical alert pin.
Note that the ina3221 has always supported summing the various input
channels and summation is enabled by default if the shunt-resistor
values are the same. This change simply provides a way to exclude
inputs from the summation. If this property is not populated, then the
functionality of the driver does not change.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929103650.86074-3-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the TI INA3221 bindings from the free-form text format to
json-schema.
Note that the INA3221 input channels default to enabled in the chip.
Unless channels are explicitly disabled in device-tree, input
channels will be enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929103650.86074-2-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
These modify the corresponding bits in the configuration register.
adi,comp-int is a hardware property, because it affects the behavior
of the interrupt signal and whatever it is connected to.
adi,timeout-enable is a hardware property, because it affects i2c
bus operation.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230919093456.10592-3-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There is nothing in the datasheet indicating that the 1ms error is
needed and I didn't encounter any error during testing with 140ms wait
time.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-2-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rename the default helper for encoding FILEID_INO32_GEN* file handles to
generic_encode_ino32_fh() and convert the filesystems that used the
default implementation to use the generic helper explicitly.
After this change, exportfs_encode_inode_fh() no longer has a default
implementation to encode FILEID_INO32_GEN* file handles.
This is a step towards allowing filesystems to encode non-decodeable
file handles for fanotify without having to implement any
export_operations.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-3-amir73il@gmail.com
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert the pinctrl-based I2C bus demultiplexer Device Tree binding
documentation to json-schema.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Export the QoS Throttling Group ID from the CXL Fixed Memory Window
Structure (CFMWS) under the root decoder sysfs attributes as qos_class.
CXL rev3.0 9.17.1.3 CXL Fixed Memory Window Structure (CFMWS)
cxl cli will use this id to match with the _DSM retrieved id for a
hot-plugged CXL memory device DPA memory range to make sure that the
DPA range is under the right CFMWS window.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169713681699.2205276.14475306324720093079.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This attribute allows cxl-cli to determine whether there are decoders
committed to a memdev. This is only a snapshot of the state, and
doesn't offer any protection or serialization against a concurrent
disable-region operation.
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169747907439.272156.10261062080830155662.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The Samsung touchscreen controllers are often used with external pull-up
for the interrupt line and the I2C lines, so we might need to enable
a regulator to bring the lines into usable state. Otherwise, this might
cause spurious interrupts and reading from I2C will fail.
Document support for a "vddio-supply" that is enabled by the cyttsp5
driver so that the regulator gets enabled when needed.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20221117190507.87535-2-linmengbo0689@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
allow specifying cmd-cnt-name and cmd-max-name in netlink specs, in
accordance with Documentation/userspace-api/netlink/c-code-gen.rst.
Use cmd-cnt-name and attr-cnt-name in the mptcp yaml spec and in the
corresponding uAPI headers, to preserve the #defines we had in the past
and avoid adding new ones.
v2:
- squash modification in mptcp.yaml and MPTCP uAPI headers
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/12d4ed0116d8883cf4b533b856f3125a34e56749.1698415310.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the ADT7490's Imon voltage readout. It is handled
largely the same way as the existing Vtt readout.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Co-developed-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Link: https://lore.kernel.org/r/20230914223947.829025-1-tpearson@raptorengineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The values of the limit registers affect the fan speed in a
particular way. Document this behaviour so that future users
can exploit it if required.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-6-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the DT property 'infineon,en-pin-fixed-level' to
indicated that the chip EN pin is at fixed level
or left unconnected(has internal pull-down).
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230831190731.265099-1-Naresh.Solanki@9elements.com
[groeck: Dropped empty line at end]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
POWER-Z is a series of devices to monitor power characteristics of
USB-C connections and display those on a on-device display.
Some of the devices, notably KM002C and KM003C, contain an additional
port which exposes the measurements via USB.
This is a driver for this monitor port.
It was developed and tested with the KM003C.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230902-powerz-v4-1-7ec2c1440687@weissschuh.net
[groeck:
Release urb after hwmon registration error;
Move priv->status initialization to correct place before reinit_completion
]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
CDX controller provides subsystem vendor, subsystem device, class and
revision info of the device along with vendor and device ID in native
endian format. CDX Bus system uses this information to bind the cdx
device to the cdx device driver.
Co-developed-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-8-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CDX bus needs to be disabled before updating/writing devices
in the FPGA. Once the devices are written, the bus shall be
rescanned. This change provides sysfs entry to enable/disable the
CDX bus.
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-6-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add DT bindings for Texas Instruments Simplelink CC1352P7 wireless MCU
BeaglePlay has CC1352P7 co-processor connected to the main AM62 (running
Linux) over UART. In the BeagleConnect Technology, CC1352 is responsible
for handling 6LoWPAN communication with beagleconnect freedom nodes as
well as their discovery.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20231017101116.178041-2-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This binding supported NVMEM cells as subnodes and that syntax is used
by few in-kenel DTS files. Modify binding to allow it.
Reported-by: Rob Herring <robh@kernel.org>
Fixes: c5330723d5 ("dt-bindings: nvmem: move deprecated cells binding to its own file")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20231024171253.19976-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This binding supported NVMEM cells as subnodes and that syntax is used
by few in-kenel DTS files. Modify binding to allow it.
Reported-by: Rob Herring <robh@kernel.org>
Fixes: c5330723d5 ("dt-bindings: nvmem: move deprecated cells binding to its own file")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231024171253.19976-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Orient-Chip OCP96011 is generally compatible with the FSA4480, add a
compatible for it with the fallback on fsa4480.
However the AUX/SBU connections are expected to be swapped compared to
FSA4480, so document this in the data-lanes description.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231020-fsa4480-swap-v2-3-9a7f9bb59873@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow specifying data-lanes to reverse the muxing orientation between
AUX+/- and SBU1/2 where necessary by the hardware design.
In the mux there's a switch that needs to be controlled from the OS, and
it either connects AUX+ -> SBU1 and AUX- -> SBU2, or the reverse: AUX+
-> SBU2 and AUX- -> SBU1, depending on the orientation of how the USB-C
connector is plugged in.
With this data-lanes property we can now specify that AUX+ and AUX-
connections are swapped between the SoC and the mux, therefore the OS
needs to consider this and reverse the direction of this switch in the
mux.
_______ _______
| | |
|-- HP --| |
|-- MIC --| |or
SoC | | MUX |-- SBU1 ---> To the USB-C
Codec |-- AUX+ --| |-- SBU2 ---> connected
|-- AUX- --| |
______| |_____|
(thanks to Neil Armstrong for this ASCII art)
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231020-fsa4480-swap-v2-1-9a7f9bb59873@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the documentation to mention that ECC NIST P-384 automatic
keypair generation is available to use ECDSA signature type, in
addition to the RSA.
Drop mentions of the now removed SHA-1 and SHA-224 options.
Add the just added FIPS 202 SHA-3 module signature hashes.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the ahash API checks the alignment of all key and result
buffers against the algorithm's declared alignmask, and for any
unaligned buffers it falls back to manually aligned temporary buffers.
This is virtually useless, however. First, since it does not apply to
the message, its effect is much more limited than e.g. is the case for
the alignmask for "skcipher". Second, the key and result buffers are
given as virtual addresses and cannot (in general) be DMA'ed into, so
drivers end up having to copy to/from them in software anyway. As a
result it's easy to use memcpy() or the unaligned access helpers.
The crypto_hash_walk_*() helper functions do use the alignmask to align
the message. But with one exception those are only used for shash
algorithms being exposed via the ahash API, not for native ahashes, and
aligning the message is not required in this case, especially now that
alignmask support has been removed from shash. The exception is the
n2_core driver, which doesn't set an alignmask.
In any case, no ahash algorithms actually set a nonzero alignmask
anymore. Therefore, remove support for it from ahash. The benefit is
that all the code to handle "misaligned" buffers in the ahash API goes
away, reducing the overhead of the ahash API.
This follows the same change that was made to shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the attribute `num_rps` to the `qat` attribute group. This returns
the number of ring pairs that a single device has. This allows to know
the maximum value that can be set to the attribute `rp2svc`.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the attribute `rp2svc` to the `qat` attribute group. This provides a
way for a user to query a specific ring pair for the type of service
that is currently configured for.
When read, the service will be returned for the defined ring pair.
When written to this value will be stored as the ring pair to return
the service of.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an interface for the rate limiting feature which allows to add,
remove and modify a QAT SLA (Service Level Agreement).
This adds a new sysfs attribute group, `qat_rl`, which can be accessed
from /sys/bus/pci/devices/<BUS:DEV:FUNCTION> with the following
hierarchy:
|-+ qat_rl
|---- id (RW) # SLA identifier
|---- cir (RW) # Committed Information Rate
|---- pir (RW) # Peak Information Rate
|---- srv (RW) # Service to be rate limited
|---- rp (RW) (HEX) # Ring pairs to be rate limited
|---- cap_rem (RW) # Remaining capability for a service
|---- sla_op (WO) # Allows to perform an operation on an SLA
The API works by setting the appropriate RW attributes and then
issuing a command through the `sla_op`. For example, to create an SLA, a
user needs to input the necessary data into the attributes cir, pir, srv
and rp and then write into `sla_op` the command `add` to execute the
operation.
The API also provides `cap_rem` attribute to get information about
the remaining device capability within a certain service which is
required when setting an SLA.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce ras counters interface for counting QAT specific device
errors and expose them through the newly created qat_ras sysfs
group attribute.
This adds the following attributes:
- errors_correctable: number of correctable errors
- errors_nonfatal: number of uncorrectable non fatal errors
- errors_fatal: number of uncorrectable fatal errors
- reset_error_counters: resets all counters
These counters are initialized during device bring up and cleared
during device shutdown and are applicable only to QAT GEN4 devices.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document SA8775P and SC7280 compatible for the True Random Number
Generator.
Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
