Highlights:
- asus-wmi: Support for screenpad and solve brightness key
press duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- Remove void function return
amd/hsmp:
- add support for metrics tbl
- create plat specific struct
- Fix iomem handling
- improve the error log
amd/pmc:
- Add dump_custom_stb module parameter
- Add PMFW command id to support S2D force flush
- Handle overflow cases where the num_samples range is higher
- Use flex array when calling amd_pmc_stb_debugfs_open_v2()
asus-wireless:
- Replace open coded acpi_match_acpi_device()
asus-wmi:
- add support for ASUS screenpad
- Do not report brightness up/down keys when also reported by acpi_video
gpiolib: acpi:
- Add a ignore interrupt quirk for Peaq C1010
- Check if a GPIO is listed in ignore_interrupt earlier
hp-bioscfg:
- Annotate struct bios_args with __counted_by
inspur-platform-profile:
- Add platform profile support
int3472:
- Add new skl_int3472_fill_gpiod_lookup() helper
- Add new skl_int3472_gpiod_get_from_temp_lookup() helper
- Stop using gpiod_toggle_active_low()
- Switch to devm_get_gpiod()
intel: bytcrc_pwrsrc:
- Convert to platform remove callback returning void
intel/ifs:
- Add new CPU support
- Add new error code
- ARRAY BIST for Sierra Forest
- Gen2 scan image loading
- Gen2 Scan test support
- Metadata validation for start_chunk
- Refactor image loading code
- Store IFS generation number
- Validate image size
intel_speed_select_if:
- Remove hardcoded map size
- Use devm_ioremap_resource
intel/tpmi:
- Add debugfs support for read/write blocked
- Add defines to get version information
intel-uncore-freq:
- Ignore minor version change
ISST:
- Allow level 0 to be not present
- Ignore minor version change
- Use fuse enabled mask instead of allowed levels
mellanox:
- Fix misspelling error in routine name
- Rename some init()/exit() functions for consistent naming
mlxbf-bootctl:
- Convert to platform remove callback returning void
mlxbf-pmc:
- Add support for BlueField-3
mlxbf-tmfifo:
- Convert to platform remove callback returning void
mlx-Convert to platform remove callback returning void:
- mlx-Convert to platform remove callback returning void
mlxreg-hotplug:
- Convert to platform remove callback returning void
mlxreg-io:
- Convert to platform remove callback returning void
mlxreg-lc:
- Convert to platform remove callback returning void
msi-ec:
- Add more EC configs
- rename fn_super_swap
nvsw-sn2201:
- Convert to platform remove callback returning void
sel3350-Convert to platform remove callback returning void:
- sel3350-Convert to platform remove callback returning void
siemens: simatic-ipc-batt-apollolake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-elkhartlake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-f7188x:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Simplify simatic_ipc_batt_remove()
surface: acpi-notify:
- Convert to platform remove callback returning void
surface: aggregator:
- Annotate struct ssam_event with __counted_by
surface: aggregator-cdev:
- Convert to platform remove callback returning void
surface: aggregator-registry:
- Convert to platform remove callback returning void
surface: dtx:
- Convert to platform remove callback returning void
surface: gpe:
- Convert to platform remove callback returning void
surface: hotplug:
- Convert to platform remove callback returning void
surface: surface3-wmi:
- Convert to platform remove callback returning void
think-lmi:
- Add bulk save feature
- Replace kstrdup() + strreplace() with kstrdup_and_replace()
- Use strreplace() to replace a character by nul
thinkpad_acpi:
- Add battery quirk for Thinkpad X120e
- replace deprecated strncpy with memcpy
- sysfs interface to auxmac
tools/power/x86/intel-speed-select:
- Display error for core-power support
- Increase max CPUs in one request
- No TRL for non compute domains
- Sanitize integer arguments
- turbo-mode enable disable swapped
- Update help for TRL
- Use cgroup isolate for CPU 0
- v1.18 release
wmi:
- Decouple probe deferring from wmi_block_list
- Decouple WMI device removal from wmi_block_list
- Fix opening of char device
- Fix probe failure when failing to register WMI devices
- Fix refcounting of WMI devices in legacy functions
x86-android-tablets:
- Add a comment about x86_android_tablet_get_gpiod()
- Create a platform_device from module_init()
- Drop "linux,power-supply-name" from lenovo_yt3_bq25892_0_props[]
- Fix Lenovo Yoga Tablet 2 830F/L vs 1050F/L detection
- Remove invalid_aei_gpiochip from Peaq C1010
- Remove invalid_aei_gpiochip support
- Stop using gpiolib private APIs
- Use platform-device as gpio-keys parent
xo15-ebook:
- Replace open coded acpi_match_acpi_device()
Merges:
- Merge branch 'pdx86/platform-drivers-x86-int3472' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-mellanox-init' into review-ilpo
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-android-tablets' into review-hans
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZT+lBwAKCRBZrE9hU+XO
Mck0AQCFU7dYLCF4d1CXtHf1eZhSXLpYdhcO+C08JGGoM+MqSgD+Jyb9KJHk4pxE
FvKG51I9neyAne9lvNrLodHRzxCYgAo=
=duM8
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- asus-wmi: Support for screenpad and solve brightness key press
duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: inspur-platform-profile: Add platform profile support
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
platform/x86: wmi: Decouple WMI device removal from wmi_block_list
platform/x86: wmi: Fix opening of char device
platform/x86: wmi: Fix probe failure when failing to register WMI devices
platform/x86: wmi: Fix refcounting of WMI devices in legacy functions
platform/x86: wmi: Decouple probe deferring from wmi_block_list
platform/x86/amd/hsmp: Fix iomem handling
platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video
platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy
tools/power/x86/intel-speed-select: v1.18 release
tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0
tools/power/x86/intel-speed-select: Increase max CPUs in one request
tools/power/x86/intel-speed-select: Display error for core-power support
tools/power/x86/intel-speed-select: No TRL for non compute domains
tools/power/x86/intel-speed-select: turbo-mode enable disable swapped
tools/power/x86/intel-speed-select: Update help for TRL
tools/power/x86/intel-speed-select: Sanitize integer arguments
platform/x86: acer-wmi: Remove void function return
platform/x86/amd/pmc: Add dump_custom_stb module parameter
...
* New drivers
- Driver for LTC2991
- Driver for POWER-Z
* Added chip / system support to existing drivers
- The ina238 driver now also supports INA237
- The asus-ec-sensors driver now supports ROG Crosshair X670E Gene
- The aquacomputer_d5next now supports Aquacomputer High Flow USB and MPS Flow
- The pmbus/mpq7932 driver now also supports MPQ2286
- The nct6683 now also supports ASRock X670E Taichi
* Various other minor improvements and fixes
- One patch series to call out is the conversion of hwmon platform
drivers to use the platform remove callback returning void
-----BEGIN PGP SIGNATURE-----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=8mxv
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for LTC2991
- Driver for POWER-Z
Added chip / system support to existing drivers:
- The ina238 driver now also supports INA237
- The asus-ec-sensors driver now supports ROG Crosshair X670E Gene
- The aquacomputer_d5next now supports Aquacomputer High Flow USB and
MPS Flow
- The pmbus/mpq7932 driver now also supports MPQ2286
- The nct6683 now also supports ASRock X670E Taichi
Various other minor improvements and fixes:
- One patch series to call out is the conversion of hwmon platform
drivers to use the platform remove callback returning void"
* tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (69 commits)
hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected
hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow
dt-bindings: hwmon: npcm: Add npcm845 compatible string
hwmon: Add driver for ltc2991
dt-bindings: hwmon: ltc2991: add bindings
hwmon: (pmbus/max31785) Add delay between bus accesses
hwmon: (ina238) add ina237 support
dt-bindings: hwmon: ti,ina2xx: add ti,ina237
hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene.
hwmon: (max31827) handle vref regulator
hwmon: (ina3221) Add support for channel summation disable
dt-bindings: hwmon: ina3221: Add ti,summation-disable
dt-bindings: hwmon: ina3221: Convert to json-schema
hwmon: (pmbus/mpq7932) Add a support for mpq2286 Power Management IC
hwmon: (pmbus/core) Add helper macro to define single pmbus regulator
regulator: dt-bindings: Add mps,mpq2286 power-management IC
hwmon: (pmbus/mpq7932) Get page count based on chip info
dt-bindings: hwmon: Add possible new properties to max31827 bindings
hwmon: (max31827) Modify conversion wait time
hwmon: (max31827) Make code cleaner
...
This is a very quiet release for SPI, we've got cleanups and minor fixes
but only a few new driver specific features. The bulk of the changes in
terms of diffstat are the cleanups, plus one bit of performance work for
McSPI.
- Conversions to use devm_clk_get_enabled() and to remove outdated
terms for controller and device.
- Device mode support for the Renesas CSI.
- Cleanups and improvements to the device tree bindings aimed at making
validation better.
- PIO FIFO usage for the OMAP2 McSPI, improving performance.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/r8kACgkQJNaLcl1U
h9B+/Qf8C+skBk4ugBT/6YvJcA+SD9MiAezhJ+ap2noUVpqWI4sJnCHl5uXAt1s5
1nSZyi1T6XDcYkMtddboGrBL6Ht7nw1gJRnOi0lGrJWq09wAhiv5syxSjo5lDBX+
bbXayj7UD7WQqAPID57mM+CQF/DhDypx3B+qudG3doH0Mge3Iw+9BmAVCu+Z+LOE
zq8wAPwxED1zwyL5zeNui3KmyATg0cxxYghocE+1SQY4MFq+94zYr3KaQCRg4PpC
6MLXwHRp4wwrwJ8va+RlIdIDUjKPTRyXSLJDEhjbNbjjf5SsD/JYV71pBqkA0O6i
RbLcn6PwkbPmw5HMCY7qUi1CxJyybg==
=NdkA
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is a very quiet release for SPI, we've got cleanups and minor
fixes but only a few new driver specific features. The bulk of the
changes in terms of diffstat are the cleanups, plus one bit of
performance work for McSPI.
- Conversions to use devm_clk_get_enabled() and to remove outdated
terms for controller and device
- Device mode support for the Renesas CSI
- Cleanups and improvements to the device tree bindings aimed at
making validation better
- PIO FIFO usage for the OMAP2 McSPI, improving performance"
* tag 'spi-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits)
spi: omap2-mcspi: Add FIFO support without DMA
spi: stm32: Explicitly include correct DT includes
spi: Export acpi_spi_find_controller_by_adev()
spi: nxp-fspi: use the correct ioremap function
spi: Don't use flexible array in struct spi_message definition
spi: bcm2835: add a sentinel at the end of the lookup array
spi: spi-geni-qcom: Rename the label unmap_if_dma
spi: rzv2m-csi: Add target mode support
spi: renesas,rzv2m-csi: Add CSI (SPI) target related property
spi: spidev: make spidev_class constant
spi: mpc52xx-psc: Make mpc52xx_psc_spi_transfer_one_message() static
spi: spi-cadence-quadspi: Fix missing unwind goto warnings
spi: omap2-mcspi: Fix hardcoded reference clock
spi: dt-bindings: Make "additionalProperties: true" explicit
spi: at91-usart: Remove some dead code
spi: dt-bindings: st,stm32-spi: Move "st,spi-midi-ns" to spi-peripheral-props.yaml
spi: qup: Vote for interconnect bandwidth to DRAM
spi: dt-bindings: qup: Document interconnects
spi: qup: Parse OPP table for DVFS support
spi: dt-bindings: qup: Document power-domains and OPP
...
This has been a fairly quiet release for the regulator API, the changes
are dominated by some new drivers and a quite large set of cleanups and
filling in the blanks of features for the existing MT6358 driver.
- Cleanups and additional features for the Mediatek MT6358 driver.
- Under voltage detection in the fixed regulator.
- Support for Maxim MAX77503, Mediatek MT6366, Qualcomm PM8909, PM8919,
PMA8048 and PMC8380.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/raIACgkQJNaLcl1U
h9BIMAf/UF5dTfkE2IsxzV33nSe/RJk890Z9MfLJOG0tZ9zuleDhn8VwZrta2yKD
U5aKUKJ6CVwbX6gt8i6+K+d6ihwk62uVObtgPBCDVZA/6OUPu7kFXIvLCphAZ/28
UOXLXpTYHzFNjI6j4sd8BQK8BKRzt2wNIuvGOWnMZ5peirK285ChdrFbZ6EfxWuN
0nuP2KtSdO+XzxB44wvMFqy343BIS4u+3y0nXQAsAZP6cZbuh/fpl4laxSzTB87a
5bMVidoKGseYtUOKJ7MNPVbE6hIcdHhURyKs29I3e6nrzMf6KUK4oiDO5p2OvsGx
jiEXni/2zp2eTZhCoFdyvBmYHKGgmQ==
=VV2i
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a fairly quiet release for the regulator API, the
changes are dominated by some new drivers and a quite large set of
cleanups and filling in the blanks of features for the existing MT6358
driver.
- Cleanups and additional features for the Mediatek MT6358 driver
- Under voltage detection in the fixed regulator
- Support for Maxim MAX77503, Mediatek MT6366, Qualcomm PM8909,
PM8919, PMA8048 and PMC8380"
* tag 'regulator-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
regulator (max5970): Remove duplicate line
regulator (max5970): Add hwmon support
regulator: qcom-rpmh: Fix smps4 regulator for pm8550ve
regulator: qcom,rpmh: Add PMC8380 compatible
regulator: qcom-rpmh: Add regulators support for PMC8380
regulator: fixed: add support for under-voltage IRQ
regulator: dt-bindings: fixed-regulator: Add under-voltage interrupt support
dt-bindings: regulator: dlg,da9210: Convert to json-schema
regulator: dt-bindings: Add ADI MAX77503 support
regulator: max77503: Add ADI MAX77503 support
regulator: Use device_get_match_data()
regulator: da9121: Use i2c_get_match_data()
regulator: Drop unnecessary of_match_device() calls
regulator: da9063: Annotate struct da9063_regulators with __counted_by
regulator: da9062: Annotate struct da9062_regulators with __counted_by
regulator: mt6358: Add supply names for MT6366 regulators
regulator: mt6358: Add missing regulators for MT6366
regulator: mt6358: Make MT6366 vcn18 LDO configurable
regulator: mt6358: fix and drop type prefix in MT6366 regulator node names
regulator: mt6358: Add supply names for MT6358 regulators
...
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private gpio_chip
structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO code
- while there are still external users accessing struct gpio_chip, let's
make gpiochip_get_desc() public so that they at least use the preferred
helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that still
don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(), use
cleanup helpers, use dev_err_probe() where it makes sense, fully convert
to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers
-----BEGIN PGP SIGNATURE-----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=1QF8
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We don't have any new drivers. The loongson driver is getting extended
with support for new models. There's a big refactor of gpio-pca953x
and many small improvements to others.
The GPIO code in the kernel has acquired a lot of cruft over the years
as well as many abusers of the API across the kernel tree. This
release cycle we have started a major cleanup and improvement effort
that will most likely span several releases. We have started by
converting external users of struct gpio_chip to accessing the wrapper
around it - struct gpio_device. This is because the latter is
reference counted while the former is removed when the provider is
unbound. We also removed several instances of drivers accessing
private GPIOLIB structures and including the private header from
drivers/gpio/.
To that end you'll see several commits aimed at different subsystems
(acked by relevant maintainers) as well as two merges from the
x86/platform tree.
We'll then rework the locking in GPIOLIB which currently uses a big
spinlock for many different things and could use becoming more
fine-grained, especially as it doesn't even get the locking right.
We'll also use SRCU for protecting the gpio_chip pointer against
in-kernel hot-unplug crashes similar to what we saw triggered from
user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB
is still vulnerable to these use-cases. I'm just mentioning the plans
here, this is not part of this PR.
You'll see some new instances of using __free(). We've added a
gpio_device_put cleanup helper similar to the put_device one
introduced by Peter Zijlstra and used it according to the preferred
pattern except where it didn't make sense.
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private
gpio_chip structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO
code
- while there are still external users accessing struct gpio_chip,
let's make gpiochip_get_desc() public so that they at least use the
preferred helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need
them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that
still don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(),
use cleanup helpers, use dev_err_probe() where it makes sense,
fully convert to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing
properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers"
* tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits)
hte: tegra194: add GPIOLIB dependency
hte: tegra194: don't access struct gpio_chip
gpiolib: provide gpio_device_get_base()
i2c: mux: gpio: don't fiddle with GPIOLIB internals
gpiolib: provide gpiod_to_gpio_device()
gpiolib: provide gpio_device_to_device()
gpio: hisi: Fix format specifier
gpiolib: provide gpio_device_find_by_fwnode()
gpio: acpi: remove acpi_get_and_request_gpiod()
gpio: Use device_get_match_data()
gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles
platform/x86: int3472: Switch to devm_get_gpiod()
platform/x86: int3472: Stop using gpiod_toggle_active_low()
platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper
platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper
gpio: vf610: simplify code by dropping data check
gpio: vf610: add i.MX8ULP of_device_id entry
dt-bindings: gpio: vf610: add i.MX95 compatible
dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
dt-bindings: gpio: vf610: update gpio-ranges
...
- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan).
- Clean up the tegra cpufreq driver (Sumit Gupta).
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
Herring).
- Add support for TI's am62p5 Soc (Bryan Brattlof).
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli).
- Update Kconfig to mention i.MX7 as well (Alexander Stein).
- Revise global turbo disable check in intel_pstate (Srinivas
Pandruvada).
- Carry out initialization of sg_cpu in the schedutil cpufreq governor
in one loop (Liao Chang).
- Simplify the condition for storing 'down_threshold' in the
conservative cpufreq governor (Liao Chang).
- Use fine-grained mutex in the userspace cpufreq governor (Liao
Chang).
- Move is_managed indicator in the userspace cpufreq governor into a
per-policy structure (Liao Chang).
- Rebuild sched-domains when removing cpufreq driver (Pierre Gondois).
- Fix buffer overflow detection in trans_stats() (Christian Marangi).
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to support
specific devices like UFS which handle multiple clocks through OPP
(Operating Performance Point) framework (Manivannan Sadhasivam).
- Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq-
event driver:
* Generalize rockchip-dfi.c to support new RK3568/RK3588 using
different DDR type (Sascha Hauer).
* Convert DT binding document format to yaml (Sascha Hauer).
* Add perf support for DFI (a unit suitable for measuring DDR
utilization) to rockchip-dfi.c to extend DFI usage (Sascha Hauer).
- Add locking to the OPP handling code in the Mediatek CCI devfreq
driver, because the voltage of shared OPP might be changed by
multiple drivers (Mark Tseng, Dan Carpenter).
- Use device_get_match_data() in the Samsung Exynos PPMU devfreq-event
driver (Rob Herring).
- Extend support for the opp-level beyond required-opps (Ulf Hansson).
- Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru).
- dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait
SoCs and document named opp-microvolt property (Bjorn Andersson,
Dmitry Baryshkov and Christian Marangi).
- Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan Chancellor).
- General cleanup of OPP code (Viresh Kumar).
- Use __get_safe_page() rather than touching the list in hibernation
snapshot code (Brian Geffon).
- Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav).
- Clean up sync_read handling in snapshot_write_next() (Brian Geffon).
- Fix kerneldoc comments for swsusp_check() and swsusp_close() to
better match code (Christoph Hellwig).
- Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
capping driver to pr_debug() (Ville Syrjälä).
- Change the minimum python version for the intel_pstate_tracer utility
from 2.7 to 3.6 (Doug Smythies).
-----BEGIN PGP SIGNATURE-----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=h8my
-----END PGP SIGNATURE-----
Merge tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add new hardware support (new Qualcomm SoC versions in cpufreq,
RK3568/RK3588 in devfreq), extend the OPP (operating performance
points) framework, improve cpufreq governors, fix issues and clean up
code (most of the changes are in cpufreq and devfreq).
Specifics:
- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan)
- Clean up the tegra cpufreq driver (Sumit Gupta)
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
Herring)
- Add support for TI's am62p5 Soc (Bryan Brattlof)
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli)
- Update Kconfig to mention i.MX7 as well (Alexander Stein)
- Revise global turbo disable check in intel_pstate (Srinivas
Pandruvada)
- Carry out initialization of sg_cpu in the schedutil cpufreq
governor in one loop (Liao Chang)
- Simplify the condition for storing 'down_threshold' in the
conservative cpufreq governor (Liao Chang)
- Use fine-grained mutex in the userspace cpufreq governor (Liao
Chang)
- Move is_managed indicator in the userspace cpufreq governor into a
per-policy structure (Liao Chang)
- Rebuild sched-domains when removing cpufreq driver (Pierre Gondois)
- Fix buffer overflow detection in trans_stats() (Christian Marangi)
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to
support specific devices like UFS which handle multiple clocks
through OPP (Operating Performance Point) framework (Manivannan
Sadhasivam)
- Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq-
event driver:
* Generalize rockchip-dfi.c to support new RK3568/RK3588 using
different DDR type (Sascha Hauer).
* Convert DT binding document format to yaml (Sascha Hauer).
* Add perf support for DFI (a unit suitable for measuring DDR
utilization) to rockchip-dfi.c to extend DFI usage (Sascha
Hauer)
- Add locking to the OPP handling code in the Mediatek CCI devfreq
driver, because the voltage of shared OPP might be changed by
multiple drivers (Mark Tseng, Dan Carpenter)
- Use device_get_match_data() in the Samsung Exynos PPMU
devfreq-event driver (Rob Herring)
- Extend support for the opp-level beyond required-opps (Ulf Hansson)
- Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru)
- dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm
Krait SoCs and document named opp-microvolt property (Bjorn
Andersson, Dmitry Baryshkov and Christian Marangi)
- Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan
Chancellor)
- General cleanup of OPP code (Viresh Kumar)
- Use __get_safe_page() rather than touching the list in hibernation
snapshot code (Brian Geffon)
- Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav)
- Clean up sync_read handling in snapshot_write_next() (Brian Geffon)
- Fix kerneldoc comments for swsusp_check() and swsusp_close() to
better match code (Christoph Hellwig)
- Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
capping driver to pr_debug() (Ville Syrjälä)
- Change the minimum python version for the intel_pstate_tracer
utility from 2.7 to 3.6 (Doug Smythies)"
* tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits)
dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
cpufreq: qcom-nvmem: add support for IPQ8064
cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
cpufreq: qcom-nvmem: add support for IPQ6018
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
cpufreq: qcom-nvmem: Add MSM8909
cpufreq: qcom-nvmem: Simplify driver data allocation
powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()
cpufreq: stats: Fix buffer overflow detection in trans_stats()
dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
PM / devfreq: rockchip-dfi: add support for RK3588
PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
PM / devfreq: rockchip-dfi: make register stride SoC specific
PM / devfreq: rockchip-dfi: Add perf support
PM / devfreq: rockchip-dfi: give variable a better name
...
- Add symbol definitions related to CDAT to the ACPICA code (Dave
Jiang).
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James Morse).
- Add __printf format attribute to acpi_os_vprintf() (Su Hui).
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh).
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt).
- Fail FPDT parsing on zero length records and add proper handling for
fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick).
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki).
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh).
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede).
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach).
- Allow _DSD buffer data only for byte accessors and document the _DSD
data buffer GUID (Andy Shevchenko).
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav).
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary).
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans
de Goede).
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede).
- Annotate struct prm_module_info with __counted_by (Kees Cook).
- Fix AER info corruption in aer_recover_queue() when error status data
has multiple sections (Shiju Jose).
- Make APEI use ERST maximum execution time for slow devices (Jeshua
Smith).
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li).
- Define common macros to use when referring to various bitfields in the
PCC generic communications channel command and status fields and use
them in some drivers (Sudeep Holla).
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose).
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET).
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav).
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav).
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki).
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki).
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski).
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt).
- Clean up coding style in pnp.h (GuoHua Cheng).
-----BEGIN PGP SIGNATURE-----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=p4Yo
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix issues, add new quirks, rearrange the IRQ override quirk
definitions, add new helpers and switch over code to using them,
rework a couple of interfaces to be more flexible, eliminate strncpy()
usage from PNP, extend the ACPI PCC mailbox driver and clean up code.
This is based on ACPI thermal driver changes that are present in the
thermal control updates for 6.7-rc1 pull request (they are depended on
by the ACPI utilities updates). However, the ACPI thermal driver
changes are not included in the list of specific ACPI changes below.
Specifics:
- Add symbol definitions related to CDAT to the ACPICA code (Dave
Jiang)
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James
Morse)
- Add __printf format attribute to acpi_os_vprintf() (Su Hui)
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh)
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt)
- Fail FPDT parsing on zero length records and add proper handling
for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick)
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki)
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh)
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede)
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach)
- Allow _DSD buffer data only for byte accessors and document the
_DSD data buffer GUID (Andy Shevchenko)
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav)
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary)
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets
(Hans de Goede)
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede)
- Annotate struct prm_module_info with __counted_by (Kees Cook)
- Fix AER info corruption in aer_recover_queue() when error status
data has multiple sections (Shiju Jose)
- Make APEI use ERST maximum execution time for slow devices (Jeshua
Smith)
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li)
- Define common macros to use when referring to various bitfields in
the PCC generic communications channel command and status fields
and use them in some drivers (Sudeep Holla)
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose)
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET)
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav)
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav)
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki)
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki)
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski)
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt)
- Clean up coding style in pnp.h (GuoHua Cheng)"
* tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
ACPI: resource: Do IRQ override on TongFang GMxXGxx
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
ACPI: acpi_pad: Rename ACPI device from device to adev
ACPI: acpi_pad: Use dev groups for sysfs
ACPI: acpi_pad: Replace acpi_driver with platform_driver
ACPI: APEI: Use ERST timeout for slow devices
ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration
PNP: replace deprecated strncpy() with memcpy()
PNP: ACPI: replace deprecated strncpy() with strscpy()
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
ACPI: scan: Use the acpi_device_is_present() helper in more places
ACPI: AC: Rename ACPI device from device to adev
...
- Untangle the initialization and updates of passive and active trip
points in the ACPI thermal driver (Rafael Wysocki).
- Reduce code duplication related to the initialization and updates
of trip points in the ACPI thermal driver (Rafael Wysocki).
- Use trip pointers for cooling device binding in the ACPI thermal
driver (Rafael Wysocki).
- Simplify critical and hot trips representation in the ACPI thermal
driver (Rafael Wysocki).
- Use trip pointers in thermal governors and in the related part of
the thermal core (Rafael Wysocki).
- Drop the trips_disabled bitmask that has become redundant from the
thermal core (Rafael Wysocki).
- Avoid updating trip points when the thermal zone temperature falls
into a trip point's hysteresis range (ícolas F. R. A. Prado).
- Add power floor notifications support to the int340x thermal control
driver (Srinivas Pandruvada).
- Rework updating trip points in the int340x thermal driver so that it
does not access thermal zone internals directly (Rafael Wysocki).
- Use param_get_byte() instead of param_get_int() as the max_idle module
parameter .get() callback in the Intel powerclamp thermal driver to
avoid possible out-of-bounds access (David Arcari).
- Add workload hints support to the int340x thermal driver (Srinivas
Pandruvada).
- Add support for Mediatek LVTS MT8192 along with suspend/resume
routines (Balsam Chihi).
- Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
Schneider-Pargmann).
- Remove duplicate error message from the max76620 driver when
thermal_of_zone_register() fails (Thierry Reding).
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein).
- Add sa8775p compatible to the QCom tsens driver (Priyansh Jain).
- Fix error check in lvts_debugfs_init() to be against PTR_ERR() in the
LVTS Mediatek driver (Minjie Du).
- Remove unused variable in thermal/tools (Kuan-Wei Chiu).
- Document the imx8dl thermal sensor (Fabio Estevam).
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel).
- Add missing unevaluatedProperties on child node schemas for tegra124
(Rob Herring)
- Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich).
-----BEGIN PGP SIGNATURE-----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=PSaG
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These further rework the ACPI thermal driver, after the changes made
to it in the previous cycle, to make it easier to grasp, get rid of
redundant pieces of internal data structures and eliminate its
reliance on a specific ordering of trip point objects in the thermal
core, make thermal core adjustments needed for the ACPI thermal driver
rework, modify the thermal governor interface so as to use trip
pointers for representing trip points in it, switch over multiple
thermal drivers to using void platform driver remove callbacks, add
support for 2 hardware features to the Intel int340x thermal driver,
add support for new hardware on ARM platforms, update documentation,
fix problems, clean up code and update the MAINTAINERS record for
thermal control.
Specifics:
- Untangle the initialization and updates of passive and active trip
points in the ACPI thermal driver (Rafael Wysocki)
- Reduce code duplication related to the initialization and updates
of trip points in the ACPI thermal driver (Rafael Wysocki)
- Use trip pointers for cooling device binding in the ACPI thermal
driver (Rafael Wysocki)
- Simplify critical and hot trips representation in the ACPI thermal
driver (Rafael Wysocki)
- Use trip pointers in thermal governors and in the related part of
the thermal core (Rafael Wysocki)
- Drop the trips_disabled bitmask that has become redundant from the
thermal core (Rafael Wysocki)
- Avoid updating trip points when the thermal zone temperature falls
into a trip point's hysteresis range (ícolas F. R. A. Prado)
- Add power floor notifications support to the int340x thermal
control driver (Srinivas Pandruvada)
- Rework updating trip points in the int340x thermal driver so that
it does not access thermal zone internals directly (Rafael
Wysocki)
- Use param_get_byte() instead of param_get_int() as the max_idle
module parameter .get() callback in the Intel powerclamp thermal
driver to avoid possible out-of-bounds access (David Arcari)
- Add workload hints support to the int340x thermal driver (Srinivas
Pandruvada)
- Add support for Mediatek LVTS MT8192 along with suspend/resume
routines (Balsam Chihi)
- Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message from the max76620 driver when
thermal_of_zone_register() fails (Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for
tegra124 (Rob Herring)
- Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"
* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
thermal: ACPI: Include the right header file
thermal: core: Don't update trip points inside the hysteresis range
thermal: core: Pass trip pointer to governor throttle callback
thermal: gov_step_wise: Fold update_passive_instance() into its caller
thermal: gov_power_allocator: Use trip pointers instead of trip indices
thermal: gov_fair_share: Rearrange get_trip_level()
thermal: trip: Define for_each_trip() macro
thermal: trip: Simplify computing trip indices
thermal/qcom/tsens: Drop ops_v0_1
thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
thermal/drivers/mediatek: Fix probe for THERMAL_V2
thermal/drivers/max77620: Remove duplicate error message
dt-bindings: timer: add imx7d compatible
dt-bindings: net: microchip: Allow nvmem-cell usage
dt-bindings: imx-thermal: Add #thermal-sensor-cells property
dt-bindings: thermal: tsens: Add sa8775p compatible
thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
...
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZUFJRgAKCRCivnWIJHzd
FtgYAP9cMsc1Mhlw3jNQnTc6q0cbTulD/SoEDPUat1dXMqjs+gEAnskwQTrTX834
fgGQeCAyp7Gmar+KeP64H0xm8kPSpAw=
=R4M7
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.7
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
Core & protocols
----------------
- Support usec resolution of TCP timestamps, enabled selectively by
a route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were created
via the kernel cmdline at boot, rather than via configfs at runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF
---
- Add new veth-like netdevice where BPF program defines the logic
of the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should
never be true but are hard for the verifier to infer.
With some extra flexibility around handling of the exit / failure.
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on
the value for the current CPU. This allows to deprecate local
one-off implementations of per-CPU storage like
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code
----------------------
- overflow: add DEFINE_FLEX() for on-stack definition of structs
with flexible array members.
- Process doc update with more guidance for reviewers.
Driver API
----------
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring
and querying state of PLL circuits used for clock syntonization,
in network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc
----
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed
-------
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block selection
for IPv6 multicast forwarding and ordering of blocks in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS
to make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=46nS
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
- Fix various typos, notably a confusing reference to the non-existent
"struct kvm_vcpu_event" (the actual structure is kvm_vcpu_events, plural).
- Update x86's kvm_mmu_page documentation to bring it closer to the code
(this raced with the removal of async zapping and so the documentation is
already stale; my bad).
- Document the behavior of x86 PMU filters on fixed counters.
-----BEGIN PGP SIGNATURE-----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=W12P
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-docs-6.7' of https://github.com/kvm-x86/linux into HEAD
KVM x86 Documentation updates for 6.7:
- Fix various typos, notably a confusing reference to the non-existent
"struct kvm_vcpu_event" (the actual structure is kvm_vcpu_events, plural).
- Update x86's kvm_mmu_page documentation to bring it closer to the code
(this raced with the removal of async zapping and so the documentation is
already stale; my bad).
- Document the behavior of x86 PMU filters on fixed counters.
- Smstateen and Zicond support for Guest/VM
- Virtualized senvcfg CSR for Guest/VM
- Added Smstateen registers to the get-reg-list selftests
- Added Zicond to the get-reg-list selftests
- Virtualized SBI debug console (DBCN) for Guest/VM
- Added SBI debug console (DBCN) to the get-reg-list selftests
-----BEGIN PGP SIGNATURE-----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=TFKQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.7-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.7
- Smstateen and Zicond support for Guest/VM
- Virtualized senvcfg CSR for Guest/VM
- Added Smstateen registers to the get-reg-list selftests
- Added Zicond to the get-reg-list selftests
- Virtualized SBI debug console (DBCN) for Guest/VM
- Added SBI debug console (DBCN) to the get-reg-list selftests
Add LoongArch's KVM support. Loongson 3A5000/3A6000 supports hardware
assisted virtualization. With cpu virtualization, there are separate
hw-supported user mode and kernel mode in guest mode. With memory
virtualization, there are two-level hw mmu table for guest mode and host
mode. Also there is separate hw cpu timer with consant frequency in
guest mode, so that vm can migrate between hosts with different freq.
Currently, we are able to boot LoongArch Linux Guests.
Few key aspects of KVM LoongArch added by this series are:
1. Enable kvm hardware function when kvm module is loaded.
2. Implement VM and vcpu related ioctl interface such as vcpu create,
vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
get general registers one by one.
3. Hardware access about MMU, timer and csr are emulated in kernel.
4. Hardwares such as mmio and iocsr device are emulated in user space
such as IPI, irqchips, pci devices etc.
-----BEGIN PGP SIGNATURE-----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=jaPm
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.7
Add LoongArch's KVM support. Loongson 3A5000/3A6000 supports hardware
assisted virtualization. With cpu virtualization, there are separate
hw-supported user mode and kernel mode in guest mode. With memory
virtualization, there are two-level hw mmu table for guest mode and host
mode. Also there is separate hw cpu timer with consant frequency in
guest mode, so that vm can migrate between hosts with different freq.
Currently, we are able to boot LoongArch Linux Guests.
Few key aspects of KVM LoongArch added by this series are:
1. Enable kvm hardware function when kvm module is loaded.
2. Implement VM and vcpu related ioctl interface such as vcpu create,
vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
get general registers one by one.
3. Hardware access about MMU, timer and csr are emulated in kernel.
4. Hardwares such as mmio and iocsr device are emulated in user space
such as IPI, irqchips, pci devices etc.
* cpuset now supports remote partitions where CPUs can be reserved for
exclusive use down the tree without requiring all the intermediate nodes
to be partitions. This makes it easier to use partitions without modifying
existing cgroup hierarchy.
* cpuset partition configuration behavior improvement.
* cgroup_favordynmods= boot param added to allow setting the flag on boot on
cgroup1.
* Misc code and doc updates.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZUBUKA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGWfMAP9WP+Z21qzzL2bY5I5kOxu+rD2fF9ORk7azILrI
c3gXSQD/bdxNWcdtrCQMvs+ToNEJvqDFxrmgG5uRUF8Ea+FCtQ8=
=gZj2
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset now supports remote partitions where CPUs can be reserved for
exclusive use down the tree without requiring all the intermediate
nodes to be partitions. This makes it easier to use partitions
without modifying existing cgroup hierarchy.
- cpuset partition configuration behavior improvement
- cgroup_favordynmods= boot param added to allow setting the flag on
boot on cgroup1
- Misc code and doc updates
* tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs/cgroup: Add the list of threaded controllers to cgroup-v2.rst
cgroup: use legacy_name for cgroup v1 disable info
cgroup/cpuset: Cleanup signedness issue in cpu_exclusive_check()
cgroup/cpuset: Enable invalid to valid local partition transition
cgroup: add cgroup_favordynmods= command-line option
cgroup/cpuset: Extend test_cpuset_prs.sh to test remote partition
cgroup/cpuset: Documentation update for partition
cgroup/cpuset: Check partition conflict with housekeeping setup
cgroup/cpuset: Introduce remote partition
cgroup/cpuset: Add cpuset.cpus.exclusive for v2
cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2
cgroup/cpuset: Fix load balance state in update_partition_sd_lb()
cgroup: Avoid extra dereference in css_populate_dir()
cgroup: Check for ret during cgroup1_base_files cft addition
A small one compared to the previous one in terms of features. In terms
of lines, as usual, the 'alloc' version upgrade accounts for most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0.
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler
or possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C.
Documentation:
- Add "The Rust experiment" section to the Rust index page.
MAINTAINERS
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmU79aIACgkQGXyLc2ht
IW03Rw//ZcbRDxVEbD9UE+aM6wtKQ1eY8QIB7gNivctv1R8spKlnsLpF/VdBQV4v
yWmMPG/Vnp7Xbkcg2kZrbo2J82NgD6ACJWxWHVb8K2N/hoIVwrQXiQUmtg8bAa5B
aDso+8WcWZOF6uzu5ww7kv8AbAOO3ReCxnIVPexeWQtZVAGeBd4BiVecoTL0mCbA
7MMNyyKxjnRSo72Sj4iFoVPjb/IkOHYRaPQA/QOvG3bwin5nTvxM+94v+UZ4D7fp
THWuZjJiC19L/C2/GGweK6mnpV2lExdZl4RC3JInu8s3R6jwGuRxUNE4vCnO9DlY
QBkeUV3qwMCG/LnAb+iyClDM5aEU2wWBFl1NwNy0yEQM/gBqk6+4HQxxB177Wte3
V65f4Sz19baci1SNCk+rFe/1EK8/UoD2jo42DXnuIUnGq5VJtVRNxbn/2tR0kNZn
9DGwR1U8shMytNen5xFLi03q+p1Zuez/YKzmTmahv8zn2JysUgj3ctFK2M3mCiFu
+HWvPFBbUbOH+/g3txBXtnvY757Nei5siSKONVZTOez6VYR//jlvLNNBbUp3vPFE
w2TuR6HcFVR8z/kjcTxIgS+xzbsT8FkugJwRdLeQU4Ky03o2Z6uosM3nky9TzWjb
oVR7rFgb9KygvP67+uVQS5OETQVO0EwutlEsQzzs7cbnoSt0ckk=
=rKLl
-----END PGP SIGNATURE-----
Merge tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"A small one compared to the previous one in terms of features. In
terms of lines, as usual, the 'alloc' version upgrade accounts for
most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler or
possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C
Documentation:
- Add "The Rust experiment" section to the Rust index page
MAINTAINERS:
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year"
* tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux:
docs: rust: add "The Rust experiment" section
x86: Enable IBT in Rust if enabled in C
rust: Use grep -Ev rather than relying on GNU grep
rust: Use awk instead of recent xargs
rust: upgrade to Rust 1.73.0
rust: print: use explicit link in documentation
rust: task: remove redundant explicit link
rust: kernel: remove `#[allow(clippy::new_ret_no_self)]`
MAINTAINERS: add Maintainer Entry Profile field for Rust
MAINTAINERS: update Rust webpage
rust: upgrade to Rust 1.72.1
rust: arc: add explicit `drop()` around `Box::from_raw()`
This pull request contains the following branches:
rcu/torture: RCU torture, locktorture and generic torture infrastructure
updates that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
rcu/fixes: Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments.
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM.
* Object information is now dumped in case of invalid callback
invocation.
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed.
rcu/docs: RCU documentation updates
rcu/refscale: RCU reference scalability test minor fixes and doc
improvements.
rcu/tasks: RCU tasks minor fixes
rcu/stall: Stall detection updates. Introduce RCU CPU Stall notifiers
that allows a subsystem to provide informations to help debugging.
Also cure some false positive stalls.
-----BEGIN PGP SIGNATURE-----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=cVD7
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
This series adds a kernel boot parameter that causes the kernel to
panic if one of the call_smp_function() APIs is stalled for more than
the specified duration. This is useful in deployments in which a clean
panic is preferable to an indefinite stall.
-----BEGIN PGP SIGNATURE-----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=ZD0S
-----END PGP SIGNATURE-----
Merge tag 'csd-lock.2023.10.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull CSD lock update from Paul McKenney:
"This adds a kernel boot parameter that causes the kernel to panic if
one of the call_smp_function() APIs is stalled for more than the
specified duration.
This is useful in deployments in which a clean panic is preferable to
an indefinite stall"
* tag 'csd-lock.2023.10.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
smp,csd: Throw an error if a CSD lock is stuck for too long
This update adds paragraphs to the portions of memory-barriers.txt that
have been marked historical due to changes in the way that the Linux
kernel handles DEC Alpha. These paragraphs includes information on
where to find the corresponding up-to-date information.
-----BEGIN PGP SIGNATURE-----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=IGyy
-----END PGP SIGNATURE-----
Merge tag 'lkmm.2023.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull Linux Kernel Memory Model updates from Paul McKenney:
"This update adds paragraphs to the portions of memory-barriers.txt
that have been marked historical due to changes in the way that the
Linux kernel handles DEC Alpha. These paragraphs includes information
on where to find the corresponding up-to-date information"
* tag 'lkmm.2023.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
docs: memory-barriers: Add note on compiler transformation and address deps
- Limit the hardcoded topology quirk for Hygon CPUs to those which have a
model ID less than 4. The newer models have the topology CPUID leaf 0xB
correctly implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By chance
a XEN/PV boot ends up with smp_num_siblings == 2, which makes the
hotplug control stay at its default value "enabled". So the mask is
never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core to
deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or even
non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned long
or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die
IDs. That's really not the right place simply because cpuinfo is
subject to be reinitialized when a CPU goes through an offline/online
cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmU+yX0THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoROUD/4vlvKEcpm9rbI5DzLcaq4DFHKbyEZF
cQtzuOSM/9vTc9DHnuoNNLl9TWSYxiVYnejf3E21evfsqspYlzbTH8bId9XBCUid
6B68AJW842M2erNuwj0b0HwF1z++zpDmBDyhGOty/KQhoM8pYOHMvntAmbzJbuso
Dgx6BLVFcboTy6RwlfRa0EE8f9W5V+JbmG/VBDpdyCInal7VrudoVFZmWQnPIft7
zwOJpAoehkp8OKq7geKDf79yWxu9a1sNPd62HtaVEvfHwehHqE6OaMLss1us+0vT
SJ/D6gmRQBOwcXaZL0wL1dG7Km9Et4AisOvzhXGvTa5b2D5oljVoqJ7V7FTf5g3u
y3aqWbeUJzERUbeJt1HoGVAKyA4GtZOvg+TNIysf6F1Z4khl9alfa9jiqjj4g1au
zgItq/ZMBEBmJ7X4FxQUEUVBG2CDsEidyNBDRcimWQUDfBakV/iCs0suD8uu8ZOD
K5jMx8Hi2+xFx7r1YqsfsyMBYOf/zUZw65RbNe+kI992JbJ9nhcODbnbo5MlAsyv
vcqlK5FwXgZ4YAC8dZHU/tyTiqAW7oaOSkqKwTP5gcyNEqsjQHV//q6v+uqtjfYn
1C4oUsRHT2vJiV9ktNJTA4GQHIYF4geGgpG8Ih2SjXsSzdGtUd3DtX1iq0YiLEOk
eHhYsnniqsYB5g==
=xrz8
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
Core:
- Avoid superfluous deactivation of the tick in the low resolution tick
NOHZ interrupt handler as the deactivation is handled already in the
idle loop and on interrupt exit.
- Update stale comments in the tick NOHZ code and rename the tick
handler functions to be self-explanatory.
- Remove an unused function in the tick NOHZ code, which was forgotten
when the last user went away.
- Handle RTC alarms which exceed the maximum alarm time of the
underlying RTC hardware gracefully.
Setting RTC alarms which exceed the maximum alarm time of the RTC
hardware failed so far and caused suspend operations to abort.
Cure this by limiting the alarm to the maximum alarm time of the RTC
hardware, which is provided by the driver. This causes early resume
wakeups, but that's way better than not suspending at all.
Drivers:
- Add a proper clocksource/event driver for the ancient Cirrus Logic
EP93xx SoC family, which is one of the last non device-tree holdouts
in arch/arm.
- The usual boring device tree bindings updates and small fixes and
enhancements all over the place.
-----BEGIN PGP SIGNATURE-----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=7Yqn
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time, timekeeping and timers:
Core:
- Avoid superfluous deactivation of the tick in the low resolution
tick NOHZ interrupt handler as the deactivation is handled already
in the idle loop and on interrupt exit.
- Update stale comments in the tick NOHZ code and rename the tick
handler functions to be self-explanatory.
- Remove an unused function in the tick NOHZ code, which was
forgotten when the last user went away.
- Handle RTC alarms which exceed the maximum alarm time of the
underlying RTC hardware gracefully.
Setting RTC alarms which exceed the maximum alarm time of the RTC
hardware failed so far and caused suspend operations to abort.
Cure this by limiting the alarm to the maximum alarm time of the
RTC hardware, which is provided by the driver. This causes early
resume wakeups, but that's way better than not suspending at all.
Drivers:
- Add a proper clocksource/event driver for the ancient Cirrus Logic
EP93xx SoC family, which is one of the last non device-tree
holdouts in arch/arm.
- The usual boring device tree bindings updates and small fixes and
enhancements all over the place"
* tag 'timers-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: ep93xx: Add driver for Cirrus Logic EP93xx
dt-bindings: timers: Add Cirrus EP93xx
clocksource/drivers/timer-atmel-tcb: Fix initialization on SAM9 hardware
clocksource/timer-riscv: ACPI: Add timer_cannot_wakeup_cpu
clocksource/drivers/sun5i: Remove surplus dev_err() when using platform_get_irq()
drivers/clocksource/timer-ti-dm: Don't call clk_get_rate() in stop function
clocksource/drivers/timer-imx-gpt: Fix potential memory leak
dt-bindings: timer: renesas,rz-mtu3: Document RZ/{G2UL,Five} SoCs
dt-bindings: timer: renesas,rz-mtu3: Improve documentation
dt-bindings: timer: renesas,rz-mtu3: Fix overflow/underflow interrupt names
alarmtimer: Use maximum alarm time for suspend
rtc: Add API function to return alarm time bound by hardware limit
tick/nohz: Update comments some more
tick/nohz: Remove unused tick_nohz_idle_stop_tick_protected()
tick/nohz: Don't shutdown the lowres tick from itself
tick/nohz: Update obsolete comments
tick/nohz: Rename the tick handlers to more self-explanatory names
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency reduction efforts
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tT5F
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm handling updates from Ingo Molnar:
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency
reduction efforts
- Misc cleanups & fixes
* tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
selftests/x86/lam: Zero out buffer for readlink()
x86/sev: Drop unneeded #include
x86/sev: Move sev_setup_arch() to mem_encrypt.c
x86/tdx: Replace deprecated strncpy() with strtomem_pad()
selftests/x86/mm: Add new test that userspace stack is in fact NX
x86/sev: Make boot_ghcb_page[] static
x86/boot: Move x86_cache_alignment initialization to correct spot
x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach
x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot
x86_64: Show CR4.PSE on auxiliaries like on BSP
x86/iommu/docs: Update AMD IOMMU specification document URL
x86/sev/docs: Update document URL in amd-memory-encryption.rst
x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window
x86/numa: Introduce numa_fill_memblks()
- Make IA32_EMULATION boot time configurable with
the new ia32_emulation=<bool> boot option.
- Clean up fast syscall return validation code: convert
it to C and refactor the code.
- As part of this, optimize the canonical RIP test code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YkaP
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Ingo Molnar:
- Make IA32_EMULATION boot time configurable with
the new ia32_emulation=<bool> boot option
- Clean up fast syscall return validation code: convert
it to C and refactor the code
- As part of this, optimize the canonical RIP test code
* tag 'x86-entry-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/32: Clean up syscall fast exit tests
x86/entry/64: Use TASK_SIZE_MAX for canonical RIP test
x86/entry/64: Convert SYSRET validation tests to C
x86/entry/32: Remove SEP test for SYSEXIT
x86/entry/32: Convert do_fast_syscall_32() to bool return type
x86/entry/compat: Combine return value test from syscall handler
x86/entry/64: Remove obsolete comment on tracing vs. SYSRET
x86: Make IA32_EMULATION boot time configurable
x86/entry: Make IA32 syscalls' availability depend on ia32_enabled()
x86/elf: Make loading of 32bit processes depend on ia32_enabled()
x86/entry: Compile entry_SYSCALL32_ignore() unconditionally
x86/entry: Rename ignore_sysret()
x86: Introduce ia32_enabled()
drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
- Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
- NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
- Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
- RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
- Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
- Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock guards
- Fix sched_setaffinity() vs. CPU hotplug race
- Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GDqb
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster
wakeup
NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more
consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded
performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no
state changes
Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler
headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock
guards
- Fix sched_setaffinity() vs. CPU hotplug race
Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
... and misc cleanups & fixes"
* tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
sched/fair: Remove SIS_PROP
sched/fair: Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
sched/fair: Scan cluster before scanning LLC in wake-up path
sched: Add cpus_share_resources API
sched/core: Fix RQCF_ACT_SKIP leak
sched/fair: Remove unused 'curr' argument from pick_next_entity()
sched/nohz: Update comments about NEWILB_KICK
sched/fair: Remove duplicate #include
sched/psi: Update poll => rtpoll in relevant comments
sched: Make PELT acronym definition searchable
sched: Fix stop_one_cpu_nowait() vs hotplug
sched/psi: Bail out early from irq time accounting
sched/topology: Rename 'DIE' domain to 'PKG'
sched/psi: Delete the 'update_total' function parameter from update_triggers()
sched/psi: Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
sched/headers: Remove comment referring to rq::cpu_load, since this has been removed
sched/numa: Complete scanning of inactive VMAs when there is no alternative
sched/numa: Complete scanning of partial VMAs regardless of PID activity
sched/numa: Move up the access pid reset logic
sched/numa: Trace decisions related to skipping VMAs
...
Add new mount options lowerdir+ and datadir+ that can be used to add
layers to lower layers stack one by one.
Unlike the legacy lowerdir mount option, special characters (i.e. colons
and cammas) are not unescaped with these new mount options.
The new mount options can be repeated to compose a large stack of lower
layers, but they may not be mixed with the lagacy lowerdir mount option,
because for displaying lower layers in mountinfo, we do not want to mix
escaped with unescaped lower layers path syntax.
Similar to data-only layer rules with the lowerdir mount option, the
datadir+ option must follow at least one lowerdir+ option and the
lowerdir+ option must not follow the datadir+ option.
If the legacy lowerdir mount option follows lowerdir+ and datadir+
mount options, it overrides them. Sepcifically, calling:
fsconfig(FSCONFIG_SET_STRING, "lowerdir", "", 0);
can be used to reset previously setup lower layers.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegt7VC94KkRtb1dfHG8+4OzwPBLYqhtc8=QFUxpFJE+=RQ@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Intel's CAT implementation
- Other improvements to resctrl code: better configuration,
simplifications, debugging support, fixes
-----BEGIN PGP SIGNATURE-----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=GGQX
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for non-contiguous capacity bitmasks being added to
Intel's CAT implementation
- Other improvements to resctrl code: better configuration,
simplifications, debugging support, fixes
* tag 'x86_cache_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Display RMID of resource group
x86/resctrl: Add support for the files of MON groups only
x86/resctrl: Display CLOSID for resource group
x86/resctrl: Introduce "-o debug" mount option
x86/resctrl: Move default group file creation to mount
x86/resctrl: Unwind properly from rdt_enable_ctx()
x86/resctrl: Rename rftype flags for consistency
x86/resctrl: Simplify rftype flag definitions
x86/resctrl: Add multiple tasks to the resctrl group at once
Documentation/x86: Document resctrl's new sparse_masks
x86/resctrl: Add sparse_masks file in info
x86/resctrl: Enable non-contiguous CBMs in Intel CAT
x86/resctrl: Rename arch_has_sparse_bitmaps
x86/resctrl: Fix remaining kernel-doc warnings
machinery and other, general cleanups to the hw mitigations code,
by Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=E7c4
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- A bunch of improvements, cleanups and fixlets to the SRSO mitigation
machinery and other, general cleanups to the hw mitigations code, by
Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
* tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/retpoline: Document some thunk handling aspects
x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN
x86/callthunks: Delete unused "struct thunk_desc"
x86/vdso: Run objtool on vdso32-setup.o
objtool: Fix return thunk patching in retpolines
x86/srso: Remove unnecessary semicolon
x86/pti: Fix kernel warnings for pti= and nopti cmdline options
x86/calldepth: Rename __x86_return_skl() to call_depth_return_thunk()
x86/nospec: Refactor UNTRAIN_RET[_*]
x86/rethunk: Use SYM_CODE_START[_LOCAL]_NOALIGN macros
x86/srso: Disentangle rethunk-dependent options
x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block
x86/bugs: Remove default case for fully switched enums
x86/srso: Remove 'pred_cmd' label
x86/srso: Unexport untraining functions
x86/srso: Improve i-cache locality for alias mitigation
x86/srso: Fix unret validation dependencies
x86/srso: Fix vulnerability reporting for missing microcode
x86/srso: Print mitigation for retbleed IBPB case
x86/srso: Print actual mitigation if requested mitigation isn't possible
...
The QMC (QUICC mutichannel controller) is a controller present in some
PowerQUICC SoC such as MPC885.
The QMC HDLC uses the QMC controller to transfer HDLC data.
Additionally, a framer can be connected to the QMC HDLC.
If present, this framer is the interface between the TDM bus used by the
QMC HDLC and the E1/T1 line.
The QMC HDLC can use this framer to get information about the E1/T1 line
and configure the E1/T1 line.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231011061437.64213-9-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
Additional properties in child node should not be allowed.
Prevent them adding 'additionalProperties: false'
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231011061437.64213-8-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
The given example mentions the 'fsl,mode' property whereas the
correct property name, the one described, is 'fsl,operational-mode'.
Fix the example to use the correct property name.
Fixes: a9b121327c ("dt-bindings: soc: fsl: cpm_qe: Add QMC controller")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231011061437.64213-7-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
* clk-renesas: (23 commits)
clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2
clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R()
clk: renesas: Add minimal boot support for RZ/G3S SoC
clk: renesas: rzg2l: Add divider clock for RZ/G3S
clk: renesas: rzg2l: Refactor SD mux driver
clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header
clk: renesas: rzg2l: Add struct clk_hw_data
clk: renesas: rzg2l: Add support for RZ/G3S PLL
clk: renesas: rzg2l: Remove critical area
clk: renesas: rzg2l: Fix computation formula
clk: renesas: rzg2l: Trust value returned by hardware
clk: renesas: rzg2l: Lock around writes to mux register
clk: renesas: rzg2l: Wait for status bit of SD mux before continuing
clk: renesas: rcar-gen3: Extend SDnH divider table
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: renesas: r8a7795: Constify r8a7795_*_clks
clk: renesas: r9a06g032: Name anonymous structs
clk: renesas: r9a06g032: Fix kerneldoc warning
clk: renesas: rzg2l: Use u32 for flag and mux_flags
clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields
...
* clk-kunit:
clk: Fix clk gate kunit test on big-endian CPUs
clk: Parameterize clk_leaf_mux_set_rate_parent
clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops
* clk-regmap:
clk: versaclock7: Convert to use maple tree register cache
clk: versaclock5: Convert to use maple tree register cache
clk: versaclock3: Convert to use maple tree register cache
clk: versaclock3: Remove redundant _is_writeable()
clk: si570: Convert to use maple tree register cache
clk: si544: Convert to use maple tree register cache
clk: si5351: Convert to use maple tree register cache
clk: si5341: Convert to use maple tree register cache
clk: si514: Convert to use maple tree register cache
clk: cdce925: Convert to use maple tree register cache
* clk-frac-divider:
clk: fractional-divider: tests: Add test suite for edge cases
clk: fractional-divider: Improve approximation when zero based and export
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the end
of an allocation
* clk-debugfs:
clk: Allow phase adjustment from debugfs
clk: Show active consumers of clocks in debugfs
* clk-spreadtrum:
clk: sprd: Composite driver support offset config
* clk-sifive:
clk: sifive: Allow building the driver as a module
clk: analogbits: Allow building the library as a module
* clk-counted:
clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
* clk-qcom: (36 commits)
clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: gcc-ipq6018: add QUP6 I2C clock
clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
clk: qcom: clk-alpha-pll: introduce stromer plus ops
clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM
clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: gpucc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: Replace of_device.h with explicit includes
clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
clk: qcom: cbf-msm8996: Convert to platform remove callback returning void
clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
clk: qcom: Add GCC driver support for SM4450
dt-bindings: clock: qcom: Add GCC clocks for SM4450
...
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Adding additionalProperties constraint on 'trig-conns' nodes results in
warnings that 'cpu' and 'arm,cs-dev-assoc' are not allowed. These are
already defined for the parent node, but need to be duplicated for the
child node. Drop the free form description that the properties also apply
to the child nodes.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20230925220511.2026514-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
'cpu' has been added as a single phandle type to dtschema, so drop the
type here.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925220511.2026514-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The soundwire-controller.yaml schema already defines the form for devices
in child nodes, so there's no need to do the same in the QCom controller
binding. Add a $ref to the soundwire-controller.yaml schema and drop the
child node schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231016155537.2973625-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Make it explicit that the not yet documented child nodes have additional
properties and the child node schema is not complete.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926144249.4053202-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This update adds support for configuring the crypto data unit size (i.e.
the granularity of file contents encryption) to be less than the
filesystem block size. This can allow users to use inline encryption
hardware in some cases when it wouldn't otherwise be possible.
In addition, there are two commits that are prerequisites for the
extent-based encryption support that the btrfs folks are working on.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZT8acBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+czAQDkStgX1ICJQANnxwbrg/SUVdZjPuFH
sJw3sUVpBR81TwEA/SyWh3YzVNZdpE7PWNrCknrC+qnO8hd9QBEjnQfwIQc=
=t44a
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
"This update adds support for configuring the crypto data unit size
(i.e. the granularity of file contents encryption) to be less than the
filesystem block size. This can allow users to use inline encryption
hardware in some cases when it wouldn't otherwise be possible.
In addition, there are two commits that are prerequisites for the
extent-based encryption support that the btrfs folks are working on"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: track master key presence separately from secret
fscrypt: rename fscrypt_info => fscrypt_inode_info
fscrypt: support crypto data unit size less than filesystem block size
fscrypt: replace get_ino_and_lblk_bits with just has_32bit_inodes
fscrypt: compute max_lblk_bits from s_maxbytes and block size
fscrypt: make the bounce page pool opt-in instead of opt-out
fscrypt: make it clearer that key_prefix is deprecated
* kvm-arm64/writable-id-regs:
: Writable ID registers, courtesy of Jing Zhang
:
: This series significantly expands the architectural feature set that
: userspace can manipulate via the ID registers. A new ioctl is defined
: that makes the mutable fields in the ID registers discoverable to
: userspace.
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: selftests: Test for setting ID register from usersapce
tools headers arm64: Update sysreg.h with kernel sources
KVM: selftests: Generate sysreg-defs.h and add to include path
perf build: Generate arm64's sysreg-defs.h and add to include path
tools: arm64: Add a Makefile for generating sysreg-defs.h
KVM: arm64: Document vCPU feature selection UAPIs
KVM: arm64: Allow userspace to change ID_AA64ZFR0_EL1
KVM: arm64: Allow userspace to change ID_AA64PFR0_EL1
KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1
KVM: arm64: Allow userspace to change ID_AA64ISAR{0-2}_EL1
KVM: arm64: Bump up the default KVM sanitised debug version to v8p8
KVM: arm64: Reject attempts to set invalid debug arch version
KVM: arm64: Advertise selected DebugVer in DBGDIDR.Version
KVM: arm64: Use guest ID register values for the sake of emulation
KVM: arm64: Document KVM_ARM_GET_REG_WRITABLE_MASKS
KVM: arm64: Allow userspace to get the writable masks for feature ID registers
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/sgi-injection:
: vSGI injection improvements + fixes, courtesy Marc Zyngier
:
: Avoid linearly searching for vSGI targets using a compressed MPIDR to
: index a cache. While at it, fix some egregious bugs in KVM's mishandling
: of vcpuid (user-controlled value) and vcpu_idx.
KVM: arm64: Clarify the ordering requirements for vcpu/RD creation
KVM: arm64: vgic-v3: Optimize affinity-based SGI injection
KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is available
KVM: arm64: Build MPIDR to vcpu index cache at runtime
KVM: arm64: Simplify kvm_vcpu_get_mpidr_aff()
KVM: arm64: Use vcpu_idx for invalidation tracking
KVM: arm64: vgic: Use vcpu_idx for the debug information
KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id
KVM: arm64: vgic-v3: Refactor GICv3 SGI generation
KVM: arm64: vgic-its: Treat the collection target address as a vcpu_id
KVM: arm64: vgic: Make kvm_vgic_inject_irq() take a vcpu pointer
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This release completes the SunRPC thread scheduler work that was
begun in v6.6. The scheduler can now find an svc thread to wake in
constant time and without a list walk. Thanks again to Neil Brown
for this overhaul.
Lorenzo Bianconi contributed infrastructure for a netlink-based
NFSD control plane. The long-term plan is to provide the same
functionality as found in /proc/fs/nfsd, plus some interesting
additions, and then migrate the NFSD user space utilities to
netlink.
A long series to overhaul NFSD's NFSv4 operation encoding was
applied in this release. The goals are to bring this family of
encoding functions in line with the matching NFSv4 decoding
functions and with the NFSv2 and NFSv3 XDR functions, preparing
the way for better memory safety and maintainability.
A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback,
enabling the server to retrieve cached size and mtime data from
clients holding write delegations. If the server can retrieve
this information, it does not have to recall the delegation in
some cases.
The usual panoply of bug fixes and minor improvements round out
this release. As always I am grateful to all contributors,
reviewers, and testers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmU5IuoACgkQM2qzM29m
f5eVsg//bVp8S93ci/oDlKfzOwH2fO5e5rna91wrDpJxkd51h6KTx55dSRG5sjAZ
EywIVOann6xCtsixAPyff5Cweg2dWvzQRsy1ZnvWQ1qZBzD5KAJY5LPkeSFUCKBo
Zani/qTOYbxzgFMjZx+yDSXDPKG68WYZBQK59SI7mURu4SYdk8aRyNY8mjHfr0Vh
Aqrcny4oVtXV4sL5P5G/2FUW7WKT3olA3jSYlRRNMhbs2qpEemRCCrspOEMMad+b
t1+ZCg+U27PMranvOJnof4RU7peZbaxDWA0gyiUbivVXVtZn9uOs0ffhktkvechL
ePc33dqdp2ITdKIPA6JlaRv5WflKXQw0YYM9Kv5mcR4A2el7owL4f/pMlPhtbYwJ
IOJv15KdKVN979G2e6WMYiKK+iHfaUUguhMEXnfnGoAajHOZNQiUEo3iFQAD7LDc
DvMF8d9QqYmB9IW8FOYaRRfZGJOQHf3TL79Nd08z/bn5swvlvfj77leux9Sb+0/m
Luk2Xvz2AJVSXE31wzabaGHkizN+BtH+e4MMbXUHBPW5jE9v7XOnEUFr4UdZyr9P
Gl87A7NcrzNjJWT5TrnzM4sOslNsx46Aeg+VuNt2fSRn2dm6iBu2B8s0N4imx6dV
PX1y9VSLq5WRhjrFZ1qeiZdsuTaQtrEiNDoRIQR6nCJPAV80iFk=
=B4wJ
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release completes the SunRPC thread scheduler work that was begun
in v6.6. The scheduler can now find an svc thread to wake in constant
time and without a list walk. Thanks again to Neil Brown for this
overhaul.
Lorenzo Bianconi contributed infrastructure for a netlink-based NFSD
control plane. The long-term plan is to provide the same functionality
as found in /proc/fs/nfsd, plus some interesting additions, and then
migrate the NFSD user space utilities to netlink.
A long series to overhaul NFSD's NFSv4 operation encoding was applied
in this release. The goals are to bring this family of encoding
functions in line with the matching NFSv4 decoding functions and with
the NFSv2 and NFSv3 XDR functions, preparing the way for better memory
safety and maintainability.
A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback, enabling the
server to retrieve cached size and mtime data from clients holding
write delegations. If the server can retrieve this information, it
does not have to recall the delegation in some cases.
The usual panoply of bug fixes and minor improvements round out this
release. As always I am grateful to all contributors, reviewers, and
testers"
* tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (127 commits)
svcrdma: Fix tracepoint printk format
svcrdma: Drop connection after an RDMA Read error
NFSD: clean up alloc_init_deleg()
NFSD: Fix frame size warning in svc_export_parse()
NFSD: Rewrite synopsis of nfsd_percpu_counters_init()
nfsd: Clean up errors in nfs3proc.c
nfsd: Clean up errors in nfs4state.c
NFSD: Clean up errors in stats.c
NFSD: simplify error paths in nfsd_svc()
NFSD: Clean up nfsd4_encode_seek()
NFSD: Clean up nfsd4_encode_offset_status()
NFSD: Clean up nfsd4_encode_copy_notify()
NFSD: Clean up nfsd4_encode_copy()
NFSD: Clean up nfsd4_encode_test_stateid()
NFSD: Clean up nfsd4_encode_exchange_id()
NFSD: Clean up nfsd4_do_encode_secinfo()
NFSD: Clean up nfsd4_encode_access()
NFSD: Clean up nfsd4_encode_readdir()
NFSD: Clean up nfsd4_encode_entry4()
NFSD: Add an nfsd4_encode_nfs_cookie4() helper
...
Every DT property needs a type defined, but "i2c-alias" is missing any
type definition. It's a "uint32", so add a type reference.
Fixes: 313e8b32c6 ("media: dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231020170225.3632933-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the bindings for the keypad subdevices of Qualcomm PM8921 and
PM8058 PMICs from text to YAML format.
While doing the conversion also drop the linux,keypad-no-autorepeat
The property was never used by DT files. Both input and DT binding
maintainers consider that bindings should switch to assertive
(linux,autorepeat) instead of negating (no-autorepeat) property.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTpoQAAKCRCRxhvAZXjc
ovFNAQDgIRjXfZ1Ku+USxsRRdqp8geJVaNc3PuMmYhOYhUenqgEAmC1m+p0y31dS
P6+HlL16Mqgu0tpLCcJK9BibpDZ0Ew4=
=7yD1
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit db1d1e8b98 ("IMA: use vfs_getattr_nosec to get
the i_version"). This commit uses direct referencing to f_path in
IMA code that otherwise uses file_inode() and file_dentry() to
reference the filesystem objects that it is measuring.
This contains work to switch things around: instead of having
filesystem code opt-in to get the "real" path, have generic code
opt-in for the "fake" path in the few places that it is needed.
Is it far more likely that new filesystems code that does not use
the file_dentry() and file_real_path() helpers will end up causing
crashes or averting LSM/audit rules if we keep the "fake" path
exposed by default.
This change already makes file_dentry() moot, but for now we did
not change this helper just added a WARN_ON() in ovl_d_real() to
catch if we have made any wrong assumptions.
After the dust settles on this change, we can make file_dentry() a
plain accessor and we can drop the inode argument to ->d_real().
- Switch struct file to SLAB_TYPESAFE_BY_RCU. This looks like a small
change but it really isn't and I would like to see everyone on
their tippie toes for any possible bugs from this work.
Essentially we've been doing most of what SLAB_TYPESAFE_BY_RCU for
files since a very long time because of the nasty interactions
between the SCM_RIGHTS file descriptor garbage collection. So
extending it makes a lot of sense but it is a subtle change. There
are almost no places that fiddle with file rcu semantics directly
and the ones that did mess around with struct file internal under
rcu have been made to stop doing that because it really was always
dodgy.
I forgot to put in the link tag for this change and the discussion
in the commit so adding it into the merge message:
https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Cleanups:
- Various smaller pipe cleanups including the removal of a spin lock
that was only used to protect against writes without pipe_lock()
from O_NOTIFICATION_PIPE aka watch queues. As that was never
implemented remove the additional locking from pipe_write().
- Annotate struct watch_filter with the new __counted_by attribute.
- Clarify do_unlinkat() cleanup so that it doesn't look like an extra
iput() is done that would cause issues.
- Simplify file cleanup when the file has never been opened.
- Use module helper instead of open-coding it.
- Predict error unlikely for stale retry.
- Use WRITE_ONCE() for mount expiry field instead of just commenting
that one hopes the compiler doesn't get smart.
Fixes:
- Fix readahead on block devices.
- Fix writeback when layztime is enabled and inodes whose timestamp
is the only thing that changed reside on wb->b_dirty_time. This
caused excessively large zombie memory cgroup when lazytime was
enabled as such inodes weren't handled fast enough.
- Convert BUG_ON() to WARN_ON_ONCE() in open_last_lookups()"
* tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
file, i915: fix file reference for mmap_singleton()
vfs: Convert BUG_ON to WARN_ON_ONCE in open_last_lookups
writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs
chardev: Simplify usage of try_module_get()
ovl: rely on SB_I_NOUMASK
fs: fix umask on NFS with CONFIG_FS_POSIX_ACL=n
fs: store real path instead of fake path in backing file f_path
fs: create helper file_user_path() for user displayed mapped file path
fs: get mnt_writers count for an open backing file's real path
vfs: stop counting on gcc not messing with mnt_expiry_mark if not asked
vfs: predict the error in retry_estale as unlikely
backing file: free directly
vfs: fix readahead(2) on block devices
io_uring: use files_lookup_fd_locked()
file: convert to SLAB_TYPESAFE_BY_RCU
vfs: shave work on failed file open
fs: simplify misleading code to remove ambiguity regarding ihold()/iput()
watch_queue: Annotate struct watch_filter with __counted_by
fs/pipe: use spinlock in pipe_read() only if there is a watch_queue
fs/pipe: remove unnecessary spinlock from pipe_write()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZT0C2gAKCRCRxhvAZXjc
otV8AQCK5F9ONoQ7ISpdrKyUJiswySGXx0CYPfXbSg5gHH87zgEAua3vwVKeGXXF
5iVsdiNzIIQDwGDx7FyxufL4ggcN6gQ=
=E1kV
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs superblock updates from Christian Brauner:
"This contains the work to make block device opening functions return a
struct bdev_handle instead of just a struct block_device. The same
struct bdev_handle is then also passed to block device closing
functions.
This allows us to propagate context from opening to closing a block
device without having to modify all users everytime.
Sidenote, in the future we might even want to try and have block
device opening functions return a struct file directly but that's a
series on top of this.
These are further preparatory changes to be able to count writable
opens and blocking writes to mounted block devices. That's a separate
piece of work for next cycle and for that we absolutely need the
changes to btrfs that have been quietly dropped somehow.
Originally the series contained a patch that removed the old
blkdev_*() helpers. But since this would've caused needles churn in
-next for bcachefs we ended up delaying it.
The second piece of work addresses one of the major annoyances about
the work last cycle, namely that we required dropping s_umount
whenever we used the superblock and fs_holder_ops for a block device.
The reason for that requirement had been that in some codepaths
s_umount could've been taken under disk->open_mutex (that's always
been the case, at least theoretically). For example, on surprise block
device removal or media change. And opening and closing block devices
required grabbing disk->open_mutex as well.
So we did the work and went through the block layer and fixed all
those places so that s_umount is never taken under disk->open_mutex.
This means no more brittle games where we yield and reacquire s_umount
during block device opening and closing and no more requirements where
block devices need to be closed. Filesystems don't need to care about
this.
There's a bunch of other follow-up work such as moving block device
freezing and thawing to holder operations which makes it work for all
block devices and not just the main block device just as we did for
surprise removal. But that is for next cycle.
Tested with fstests for all major fses, blktests, LTP"
* tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
porting: update locking requirements
fs: assert that open_mutex isn't held over holder ops
block: assert that we're not holding open_mutex over blk_report_disk_dead
block: move bdev_mark_dead out of disk_check_media_change
block: WARN_ON_ONCE() when we remove active partitions
block: simplify bdev_del_partition()
fs: Avoid grabbing sb->s_umount under bdev->bd_holder_lock
jfs: fix log->bdev_handle null ptr deref in lbmStartIO
bcache: Fixup error handling in register_cache()
xfs: Convert to bdev_open_by_path()
reiserfs: Convert to bdev_open_by_dev/path()
ocfs2: Convert to use bdev_open_by_dev()
nfs/blocklayout: Convert to use bdev_open_by_dev/path()
jfs: Convert to bdev_open_by_dev()
f2fs: Convert to bdev_open_by_dev/path()
ext4: Convert to bdev_open_by_dev()
erofs: Convert to use bdev_open_by_path()
btrfs: Convert to bdev_open_by_path()
fs: Convert to bdev_open_by_dev()
mm/swap: Convert to use bdev_open_by_dev()
...
Linus Torvalds
Paolo Bonzini
Dan Williams
Paul E. McKenney
Dave Airlie
Amir Goldstein
Alexander Larsson
Herve Codina
Stephen Boyd
Rob Herring
Oliver Upton
Dmitry Baryshkov