DMA areas are not necessarily backed by struct page, so we cannot
rely on it for deferred I/O. Allocate a shadow buffer for drivers
that require deferred I/O and use it as framebuffer memory.
Fixes driver errors about being "Unable to handle kernel NULL pointer
dereference at virtual address" or "Unable to handle kernel paging
request at virtual address".
The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial
allocation, which creates the DMA-backed buffer object, and a tail
that sets up the fbdev data structures. There is a tail function for
direct memory mappings and a tail function for deferred I/O with
the shadow buffer.
It is no longer possible to use deferred I/O without shadow buffer.
It can be re-added if there exists a reliably test for usable struct
page in the allocated DMA-backed buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
CLoses: https://lore.kernel.org/dri-devel/CAEXMXLR55DziAMbv_+2hmLeH-jP96pmit6nhs6siB22cpQFr9w@mail.gmail.com/
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Fixes: 5ab91447aa ("drm/tiny/ili9225: Use fbdev-dma")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211090643.74250-1-tzimmermann@suse.de
drivers/gpu/drm/imagination/ includes local headers with the double-quote
form (#include "...").
Hence, the header search path addition is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210102352.1517115-1-masahiroy@kernel.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
fixp2int always rounds down, fixp2int_ceil rounds up. We need
the new fixp2int_round.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220043410.416867-3-alex.hung@amd.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The cgroups controller is currently maintained through the
drm-misc tree, so lets add Maxime Ripard, Natalie Vock
and me as specific maintainers for dmem.
We keep the cgroup mailing list CC'd on all cgroup specific patches.
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Natalie Vock <natalie.vock@gmx.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220140757.16823-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
When compiling without CONFIG_IA32_EMULATION, there can be some errors:
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration
of function ‘kfree’.
197 | kfree(mb_msg);
| ^~~~~
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration
of function ‘kzalloc’.
418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL);
| ^~~~~~~
Add the missing include.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211015354.3388171-1-suhui@nfschina.com
I was pondering with myself for a while if I should just make it official
that I'm not really involved in the kernel community anymore, neither as a
reviewer, nor as a maintainer.
Most of the time I simply excused myself with "if something urgent comes
up, I can chime in and help out". Lyude and Danilo are doing a wonderful
job and I've put all my trust into them.
However, there is one thing I can't stand and it's hurting me the most.
I'm convinced, no, my core believe is, that inclusivity and respect,
working with others as equals, no power plays involved, is how we should
work together within the Free and Open Source community.
I can understand maintainers needing to learn, being concerned on
technical points. Everybody deserves the time to understand and learn. It
is my true belief that most people are capable of change eventually. I
truly believe this community can change from within, however this doesn't
mean it's going to be a smooth process.
The moment I made up my mind about this was reading the following words
written by a maintainer within the kernel community:
"we are the thin blue line"
This isn't okay. This isn't creating an inclusive environment. This isn't
okay with the current political situation especially in the US. A
maintainer speaking those words can't be kept. No matter how important
or critical or relevant they are. They need to be removed until they
learn. Learn what those words mean for a lot of marginalized people. Learn
about what horrors it evokes in their minds.
I can't in good faith remain to be part of a project and its community
where those words are tolerated. Those words are not technical, they are
a political statement. Even if unintentionally, such words carry power,
they carry meanings one needs to be aware of. They do cause an immense
amount of harm.
I wish the best of luck for everybody to continue to try to work from
within. You got my full support and I won't hold it against anybody trying
to improve the community, it's a thankless job, it's a lot of work. People
will continue to burn out.
I got burned out enough by myself caring about the bits I maintained, but
eventually I had to realize my limits. The obligation I felt was eating me
from inside. It stopped being fun at some point and I reached a point
where I simply couldn't continue the work I was so motivated doing as I've
did in the early days.
Please respect my wishes and put this statement as is into the tree.
Leaving anything out destroys its entire meaning.
Respectfully
Karol
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250215073753.1217002-2-kherbst@redhat.com
Most kernel configs enable multiple Tegra SoC generations, causing this
typo to go unnoticed. But in the case where a kernel config is strictly
for Tegra186, this is a problem.
Fixes: 989863d7cb ("drm/nouveau/pmu: select implementation based on available firmware")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218-nouveau-gm10b-guard-v2-1-a4de71500d48@gmail.com
The current implementation has a bug: If the current css doesn't
contain any pool that is a descendant of the "pool" (i.e. when
found_descendant == false), then "pool" will point to some unrelated
pool. If the current css has a child, we'll overwrite parent_pool with
this unrelated pool on the next iteration.
Since we can just check whether a pool refers to the same region to
determine whether or not it's related, all the additional pool tracking
is unnecessary, so just switch to using css_for_each_descendant_pre for
traversal.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127152754.21325-1-friedrich.vock@gmx.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
In case we have to retry the loop, we are missing to unlock+put the
folio. In that case, we will keep failing make_device_exclusive_range()
because we cannot grab the folio lock, and even return from the function
with the folio locked and referenced, effectively never succeeding the
make_device_exclusive_range().
While at it, convert the other unlock+put to use a folio as well.
This was found by code inspection.
Fixes: 8f187163eb ("nouveau/svm: implement atomic SVM access")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124181524.3584236-2-david@redhat.com
In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):
gpiod_set_value(jadard->reset, 1); --> Deassert reset
gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
gpiod_set_value(jadard->reset, 1); --> Deassert reset
However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().
Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.
Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.
Fixes: 6b818c533d ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c965 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
Without the DP helper code, the newly added displayport support
causes a link failure:
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.o: in function `hibmc_dp_aux_init':
dp_aux.c:(.text+0x37e): undefined reference to `drm_dp_aux_init'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_set_pattern':
dp_link.c:(.text+0xae): undefined reference to `drm_dp_dpcd_write'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_get_adjust_train':
dp_link.c:(.text+0x121): undefined reference to `drm_dp_get_adjust_request_voltage'
x86_64-linux-ld: dp_link.c:(.text+0x12e): undefined reference to `drm_dp_get_adjust_request_pre_emphasis'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_training':
dp_link.c:(.text+0x2b0): undefined reference to `drm_dp_dpcd_write'
x86_64-linux-ld: dp_link.c:(.text+0x2e3): undefined reference to `drm_dp_dpcd_write'
Add both DRM_DISPLAY_DP_HELPER and DRM_DISPLAY_HELPER, which is
in turn required by the former.
Fixes: 0ab6ea261c ("drm/hisilicon/hibmc: add dp module in hibmc")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127071059.617567-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
'priorities_info' is uninitialized, and the uninitialized value is copied
to user object when calling PANTHOR_UOBJ_SET(). Using memset to initialize
'priorities_info' to avoid this garbage value problem.
Fixes: f70000ef23 ("drm/panthor: Add DEV_QUERY_GROUP_PRIORITIES_INFO dev query")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250119025828.1168419-1-suhui@nfschina.com
The find_preferred_mode() functions takes the mode_config mutex, but due
to the order most tests have, is called with the crtc_ww_class_mutex
taken. This raises a warning for a circular dependency when running the
tests with lockdep.
Reorder the tests to call find_preferred_mode before the acquire context
has been created to avoid the issue.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-4-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tests all deviate slightly in how they assign their local pointers
to DRM entities. This makes refactoring pretty difficult, so let's just
move the assignment as soon as the entities are allocated.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-3-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181 ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
Disable runtime PM for the duration of reset/recovery so it is possible
to set the correct runtime PM state depending on the outcome of the
`ivpu_resume()`. Don’t suspend or reset the HW if the NPU is suspended
when the reset/recovery is requested. Also, move common reset/recovery
code to separate functions for better code readability.
Fixes: 27d19268cf ("accel/ivpu: Improve recovery and reset support")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129124009.1039982-4-jacek.lawrynowicz@linux.intel.com
pm_runtime_resume_and_get() sets dev->power.runtime_error that causes
all subsequent pm_runtime_get_sync() calls to fail.
Clear the runtime_error using pm_runtime_set_suspended(), so the driver
doesn't have to be reloaded to recover when the NPU fails to boot during
runtime resume.
Fixes: 7d4b4c7443 ("accel/ivpu: Remove suspend_reschedule_counter")
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129124009.1039982-3-jacek.lawrynowicz@linux.intel.com
If the hotplug detect of a display is low for longer than one second
(configurable through drm_dp_cec_unregister_delay), then the CEC adapter
is unregistered since we assume the display was disconnected. If the
HPD went low for less than one second, then we check if the properties
of the CEC adapter have changed, since that indicates that we actually
switch to new hardware and we have to unregister the old CEC device and
register a new one.
Unfortunately, the test for changed properties was written poorly, and
after a new CEC capability was added to the CEC core code the test always
returned true (i.e. the properties had changed).
As a result the CEC device was unregistered and re-registered for every
HPD toggle. If the CEC remote controller integration was also enabled
(CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was
also unregistered and re-registered. As a result the input device in
/sys would keep incrementing its number, e.g.:
/sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20
Since short HPD toggles are common, the number could over time get into
the thousands.
While not a serious issue (i.e. nothing crashes), it is not intended
to work that way.
This patch changes the test so that it only checks for the single CEC
capability that can actually change, and it ignores any other
capabilities, so this is now safe as well if new caps are added in
the future.
With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be
dropped as well, so that's a nice cleanup.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Farblos <farblos@vodafonemail.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 2c6d1fffa1 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX")
Tested-by: Farblos <farblos@vodafonemail.de>
Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The ASTDP transmitter sometimes takes up to 1 second for enabling the
video signal, while the timeout is only 200 msec. This results in a
kernel error message. Increase the timeout to 1 second. An example
of the error message is shown below.
[ 697.084433] ------------[ cut here ]------------
[ 697.091115] ast 0000:02:00.0: [drm] drm_WARN_ON(!__ast_dp_wait_enable(ast, enabled))
[ 697.091233] WARNING: CPU: 1 PID: 160 at drivers/gpu/drm/ast/ast_dp.c:232 ast_dp_set_enable+0x123/0x140 [ast]
[...]
[ 697.272469] RIP: 0010:ast_dp_set_enable+0x123/0x140 [ast]
[...]
[ 697.415283] Call Trace:
[ 697.420727] <TASK>
[ 697.425908] ? show_trace_log_lvl+0x196/0x2c0
[ 697.433304] ? show_trace_log_lvl+0x196/0x2c0
[ 697.440693] ? drm_atomic_helper_commit_modeset_enables+0x30a/0x470
[ 697.450115] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.458059] ? __warn.cold+0xaf/0xca
[ 697.464713] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.472633] ? report_bug+0x134/0x1d0
[ 697.479544] ? handle_bug+0x58/0x90
[ 697.486127] ? exc_invalid_op+0x13/0x40
[ 697.492975] ? asm_exc_invalid_op+0x16/0x20
[ 697.500224] ? preempt_count_sub+0x14/0xc0
[ 697.507473] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.515377] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.523227] drm_atomic_helper_commit_modeset_enables+0x30a/0x470
[ 697.532388] drm_atomic_helper_commit_tail+0x58/0x90
[ 697.540400] ast_mode_config_helper_atomic_commit_tail+0x30/0x40 [ast]
[ 697.550009] commit_tail+0xfe/0x1d0
[ 697.556547] drm_atomic_helper_commit+0x198/0x1c0
This is a cosmetical problem. Enabling the video signal still works
even with the error message. The problem has always been present, but
only recent versions of the ast driver warn about missing the timeout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 4e29cc7c5c ("drm/ast: astdp: Replace ast_dp_set_on_off()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127134423.84266-1-tzimmermann@suse.de
The header drm_print.h uses members of struct drm_device pointers, as
such, it should include drm_device.h to let the compiler know the full
type definition.
Without such include, users of drm_print.h that don't explicitly need
drm_device.h would bump into build errors and be forced to include the
latter.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121210935.84357-1-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We added some locking to this function, but accidentally forgot to unlock
if zynqmp_dp_mode_configure() failed. Use a guard lock to fix it.
Fixes: a7d5eeaa57 ("drm: zynqmp_dp: Add locking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4042bd9-c943-4738-a2e1-8647259137c6@stanley.mountain
A regression was caused by commit e4b5ccd392 ("drm/v3d: Ensure job pointer is set to NULL
after job completion"), but this commit is not yet in next-fixes,
fast-forward it.
Try #2, first one didn't have v6.13 in it.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmeNkBEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGgN4IAIEa4TrwIPP0cI4h
iLI7rXcQaQplFlEGcmLutzItlf2YnoSoIa7fJoThJwKZIcz5o76sqtbTvQebZGsO
SRmthEixpFdJK//5fQR1OZaSsMAifH2kQrEjvQqF7OxwvVOOAHZ7bUuyOvrTRFE8
Su6kUXjmtN4O2oBEVgPKiStjd2sIqT8+Y67WjGwbDY7cU7m0qN4aBegPg5wrHQWm
edIBWN53dv/5R197qntCxaTGG+OsiFHr6LMfg6tLhq8Pw+hFGAcdgcUZ2YeCbmw8
noN0ukiaOewRgYmZI8oj8x6+zncNR/SWFNgAMxnLvK8o5oHx0R/0CtgNZSi7ocn3
WIm9hzg=
=m02S
-----END PGP SIGNATURE-----
Merge v6.13 into drm-next
A regression was caused by commit e4b5ccd392 ("drm/v3d: Ensure job
pointer is set to NULL after job completion"), but this commit is not
yet in next-fixes, fast-forward it.
Note that this recreates Linus merge in 96c84703f1 ("Merge tag
'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel")
because I didn't want to backmerge a random point in the merge window.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
In the combination of DRM_KMS_HELPER=m, DRM_GEM_SHMEM_HELPER=y, DRM_FBDEV_EMULATION=y,
The shmem code fails to link against the KMS helpers:
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_driver_fbdev_probe':
(.text+0xeec601): undefined reference to `drm_fb_helper_alloc_info'
x86_64-linux-ld: (.text+0xeec633): undefined reference to `drm_fb_helper_fill_info'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_get_page':
drm_fbdev_shmem.c:(.text+0xeec7d2): undefined reference to `drm_gem_fb_get_obj'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_fb_mmap':
drm_fbdev_shmem.c:(.text+0xeec9f6): undefined reference to `drm_gem_fb_get_obj'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_defio_imageblit':
(.rodata+0x5b2288): undefined reference to `drm_fb_helper_check_var'
x86_64-linux-ld: (.rodata+0x5b2290): undefined reference to `drm_fb_helper_set_par'
This can happen for a number of device drivers that select DRM_GEM_SHMEM_HELPER
without also selecting DRM_KMS_HELPER. To work around this, add another select
that forces DRM_KMS_HELPER to be built-in rather than a loadable module, but
only if FBDEV emulation is also enabled. DRM_TTM_HELPER and DRM_GEM_DMA_HELPER
look like they have the same problem in theory even if there is no possible
configuration that shows it. For consistency, do the same change to those.
Closes: https://lore.kernel.org/all/20250121-greedy-flounder-of-abundance-4d2ee8-mkl@pengutronix.de
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122090211.3161186-1-arnd@kernel.org
When testing on my tiled display, initially the tiled display is
detected correctly:
[90376.523692] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] fallback: Not all outputs enabled
[90376.523713] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] Enabled: 0, detected: 2
...
[90376.523967] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 1920x2160 set (1920,0)
[90376.524020] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:134:pipe B] desired mode 1920x2160 set (0,0)
But then, when modes have been set:
[90379.729525] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] [CONNECTOR:287:DP-4] on [CRTC:82:pipe A]: 1920x2160
[90379.729640] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] [CONNECTOR:289:DP-5] on [CRTC:134:pipe B]: 1920x2160
...
[90379.730036] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 1920x2160 set (0,0)
[90379.730124] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:134:pipe B] desired mode 1920x2160 set (0,0)
Call drm_client_get_tile_offsets() in drm_client_firmware_config() as
well, to ensure that the offset is set correctly.
This has to be done as a separate pass, as the tile order may not be
equal to the drm connector order.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
Tiled displays have a different x/y offset to begin with. Instead of
attempting to remember this, just apply a delta instead.
This fixes the first tile being duplicated on other tiles when vt
switching.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
code
- Make sure FRED's RSP0 MSR is synchronized with its corresponding per-CPU
value in order to avoid double faults in hotplug scenarios
- Disable EXECMEM_ROX on x86 for now because it didn't receive proper x86
maintainers review, went in and broke a bunch of things
-----BEGIN PGP SIGNATURE-----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=b6qH
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Mark serialize() noinstr so that it can be used from instrumentation-
free code
- Make sure FRED's RSP0 MSR is synchronized with its corresponding
per-CPU value in order to avoid double faults in hotplug scenarios
- Disable EXECMEM_ROX on x86 for now because it didn't receive proper
x86 maintainers review, went in and broke a bunch of things
* tag 'x86_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Make serialize() always_inline
x86/fred: Fix the FRED RSP0 MSR out of sync with its per-CPU cache
x86: Disable EXECMEM_ROX support
"half-ways" and leaves hrtimers not (re-)initialized properly
- Annotate accesses to a timer group's ignore flag to prevent KCSAN from
raising data_race warnings
- Make sure timer group initialization is visible to timer tree walkers and
avoid a hypothetical race
- Fix another race between CPU hotplug and idle entry/exit where timers on
a fully idle system are getting ignored
- Fix a case where an ignored signal is still being handled which it shouldn't
be
-----BEGIN PGP SIGNATURE-----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=Xfav
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Reset hrtimers correctly when a CPU hotplug state traversal happens
"half-ways" and leaves hrtimers not (re-)initialized properly
- Annotate accesses to a timer group's ignore flag to prevent KCSAN
from raising data_race warnings
- Make sure timer group initialization is visible to timer tree walkers
and avoid a hypothetical race
- Fix another race between CPU hotplug and idle entry/exit where timers
on a fully idle system are getting ignored
- Fix a case where an ignored signal is still being handled which it
shouldn't be
* tag 'timers_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Handle CPU state correctly on hotplug
timers/migration: Annotate accesses to ignore flag
timers/migration: Enforce group initialization visibility to tree walkers
timers/migration: Fix another race between hotplug and idle entry/exit
signal/posixtimers: Handle ignore/blocked sequences correctly
- Fix sunxi systems to wake up from suspend with an NMI by pressing the power
button
- Do not spuriously enable interrupts in gic-v3 in a nested
interrupts-off section
- Make sure gic-v3 handles properly a failure to enter a low power state
-----BEGIN PGP SIGNATURE-----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=Hjnc
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix an OF node leak in irqchip init's error handling path
- Fix sunxi systems to wake up from suspend with an NMI by
pressing the power button
- Do not spuriously enable interrupts in gic-v3 in a nested
interrupts-off section
- Make sure gic-v3 handles properly a failure to enter a
low power state
* tag 'irq_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Plug a OF node reference leak in platform_irqchip_probe()
irqchip/sunxi-nmi: Add missing SKIP_WAKE flag
irqchip/gic-v3-its: Don't enable interrupts in its_irq_set_vcpu_affinity()
irqchip/gic-v3: Handle CPU_PM_ENTER_FAILED correctly
artifacts
- Avoid scheduling lag by computing lag properly and thus address an EEVDF
entity placement issue
-----BEGIN PGP SIGNATURE-----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=fZWm
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Do not adjust the weight of empty group entities and avoid
scheduling artifacts
- Avoid scheduling lag by computing lag properly and thus address
an EEVDF entity placement issue
* tag 'sched_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix update_cfs_group() vs DELAY_DEQUEUE
sched/fair: Fix EEVDF entity placement bug causing scheduling lag
Fix the following issues identified by Smatch static checker:
- The call to dma_buf_put(attach->dmabuf) after dma_buf_detach()
leads to a UAF bug as dma_buf_detach() frees the attach object.
Fix this by extracting the dmabuf object from attach and using
that in the call to dma_buf_put().
- The resv object is extracted from attach before checking to see
if attach is valid (that is !NULL) or not. Although, attach would
very likely be valid, fix this by making sure that the resv object
is used only after ensuring that attach is valid.
Fixes: 2885e575ab ("drm/virtio: Add helpers to initialize and free the imported object")
Fixes: ca77f27a26 ("drm/virtio: Import prime buffers from other devices as guest blobs")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212055421.775759-1-vivek.kasireddy@intel.com
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: Edited commit title]
It was reported that the GFP flags in trace events went from human
readable to just their hex values:
gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca
This was caused by a change that added the use of enums in calculating
the GFP flags. As defines get translated into their values in the
trace event format files, the user space tooling could easily convert
the GFP flags into their symbols via the __print_flags() helper macro.
The problem is that enums do not get converted, and the names of the
enums show up in the format files and user space tooling cannot translate
them.
Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is the
tracing infrastructure macro that informs the tracing subsystem what
the values for enums and it can then expose that to user space.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ4u7AxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgIkAP0VVW80Ck5K9hpDJ3SvSgaGDntSegY7
lI0ExVqGsJz8GQEAzkaRjgGXuXfzGzA9K7ZUe9X4R8W0Xkl9GisvqqEU1Ak=
=rzFM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix regression in GFP output in trace events
It was reported that the GFP flags in trace events went from human
readable to just their hex values:
gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca
This was caused by a change that added the use of enums in calculating
the GFP flags.
As defines get translated into their values in the trace event format
files, the user space tooling could easily convert the GFP flags into
their symbols via the __print_flags() helper macro.
The problem is that enums do not get converted, and the names of the
enums show up in the format files and user space tooling cannot
translate them.
Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is
the tracing infrastructure macro that informs the tracing subsystem
what the values for enums and it can then expose that to user space"
* tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: gfp: Fix the GFP enum values shown for user space tracing tools
Another fix and testcase to avoid the newly added WARN in the case of
non-translatable addresses.
-----BEGIN PGP SIGNATURE-----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=Uw0f
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another fix and testcase to avoid the newly added WARN in the case of
non-translatable addresses"
* tag 'devicetree-fixes-for-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/address: Fix WARN when attempting translating non-translatable addresses
of/unittest: Add test that of_address_to_resource() fails on non-translatable address
Two last minute fixes: one build issue on TI soc drivers,
and a regression in the renesas reset controller driver.
-----BEGIN PGP SIGNATURE-----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=UIAA
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two last minute fixes: one build issue on TI soc drivers, and a
regression in the renesas reset controller driver"
* tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: ti: pruss: Fix pruss APIs
reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device
several spi controller drivers because of a change in the way the dummy
cycles validity is checked. We do not know at the moment how to handle
the situation properly, so we prefer to revert the faulty patch for the
next release.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmeKqocACgkQJWrqGEe9
VoQcWQgAv8bth4dYDRDYkzpfC2vkysf/kXz0FX3yhHV/lvRTzhcupikscZYqdygW
gVwRhjSBreoJ5kuaK/oI2Xsv4+czpkYkrG0EYaXngqXIquzF/43Dj4iiti+B7LrJ
jLXAijuHNhmPn8y8fRWq3V0h8ean7z/eSDY4fHxWq3DYjmAUHDtuIhFnKiciDhQH
Jj9O/LSgEvLneZ3dOqxOvj8Au0gXK4+e3st9OFv2OHMaJsQ9Q7ctEK4dHXpao8YT
XMP5oJN/Pv2fCxohcpYHFEl/1Wbf9+mtlhYEjzIrclADoE3+S1V2wBBoUWYd0+eB
85P43jnPO/7+eJIXeNhkn/8qij1LoQ==
=ICSH
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd revert from Miquel Raynal:
"Very late this cycle we identified a breakage that could potentially
hit several spi controller drivers because of a change in the way the
dummy cycles validity is checked.
We do not know at the moment how to handle the situation properly, so
we prefer to revert the faulty patch for the next release"
* tag 'mtd/fixes-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spi-nor: core: replace dummy buswidth from addr to data"
Tracing tools like perf and trace-cmd read the /sys/kernel/tracing/events/*/*/format
files to know how to parse the data and also how to print it. For the
"print fmt" portion of that file, if anything uses an enum that is not
exported to the tracing system, user space will not be able to parse it.
The GFP flags use to be defines, and defines get translated in the print
fmt sections. But now they are converted to use enums, which is not.
The mm_page_alloc trace event format use to have:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (((struct page *)vmemmap_base) + (REC->pfn)) : ((void
*)0), REC->pfn != -1UL ? REC->pfn : 0, REC->order, REC->migratetype,
(REC->gfp_flags) ? __print_flags(REC->gfp_flags, "|", {( unsigned
long)(((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) |
(( gfp_t)0x40000u) | (( gfp_t)0x80000u) | (( gfp_t)0x2000u)) & ~((
gfp_t)(0x400u|0x800u))) | (( gfp_t)0x400u)), "GFP_TRANSHUGE"}, {( unsigned
long)((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) ...
Where the GFP values are shown and not their names. But after the GFP
flags were converted to use enums, it has:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (vmemmap + (REC->pfn)) : ((void *)0), REC->pfn != -1UL
? REC->pfn : 0, REC->order, REC->migratetype, (REC->gfp_flags) ?
__print_flags(REC->gfp_flags, "|", {( unsigned long)((((((((
gfp_t)(((((1UL))) << (___GFP_DIRECT_RECLAIM_BIT))|((((1UL))) <<
(___GFP_KSWAPD_RECLAIM_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_IO_BIT)))
| (( gfp_t)((((1UL))) << (___GFP_FS_BIT))) | (( gfp_t)((((1UL))) <<
(___GFP_HARDWALL_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_HIGHMEM_BIT))))
| (( gfp_t)((((1UL))) << (___GFP_MOVABLE_BIT))) | (( gfp_t)0)) | ((
gfp_t)((((1UL))) << (___GFP_COMP_BIT))) ...
Where the enums names like ___GFP_KSWAPD_RECLAIM_BIT are shown and not their
values. User space has no way to convert these names to their values and
the output will fail to parse. What is shown is now:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x1d1ac1 order=0 migratetype=1 gfp_flags=0x140cca
The TRACE_DEFINE_ENUM() macro was created to handle enums in the print fmt
files. This causes them to be replaced at boot up with the numbers, so
that user space tooling can parse it. By using this macro, the output is
back to the human readable:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x122233 order=0 migratetype=1 gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250116214438.749504792@goodmis.org
Reported-by: Michael Petlan <mpetlan@redhat.com>
Closes: https://lore.kernel.org/all/87be5f7c-1a0-dad-daa0-54e342efaea7@redhat.com/
Fixes: 772dd03427 ("mm: enumerate all gfp flags")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- ltc2991, tmp513: Fix problems seen when dividing negative numbers
- drivetemp: Handle large timeouts observed on some drives
- acpi_power_meter: Fix loading the driver on platforms without _PMD method
-----BEGIN PGP SIGNATURE-----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=jMB2
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc2991, tmp513: Fix problems seen when dividing negative numbers
- drivetemp: Handle large timeouts observed on some drives
- acpi_power_meter: Fix loading the driver on platforms without _PMD
method
* tag 'hwmon-for-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2991) Fix mixed signed/unsigned in DIV_ROUND_CLOSEST
hwmon: (drivetemp) Set scsi command timeout to 10s
hwmon: (acpi_power_meter) Fix a check for the return value of read_domain_devices().
hwmon: (tmp513) Fix division of negative numbers
- convert regular spinlock to raw spinlock in gpio-xilinx to avoid a
lockdep splat
-----BEGIN PGP SIGNATURE-----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=WhW4
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- convert regular spinlock to raw spinlock in gpio-xilinx to avoid a
lockdep splat
* tag 'gpio-fixes-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: xilinx: Convert gpio_lock to raw spinlock
