Add timer driver for Milbeaut SoCs series.
The timer has two 32-bit width down counters, one of which is configured
as a clockevent device and the other is configured as a clock source.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds the basic M10V SoC support under arch/arm.
Since all cores are activated in the custom bootloader before booting
linux, it is necessary to wait for the secondary-cores using cpu-enable-
method and special sram.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a DT binding documentation for the M10V and its evaluation
board.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a compatible string "socionext,milbeaut-m10v-smp"
for Milbeaut M10V to the 32 bit ARM CPU device tree binding.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Milbeaut M10V SoC needs a part of sram for smp, so this adds the
M10V sram compatible and binding.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is
set too low. Increase it to the 2000mV as specified on the board schematic.
So far the board worked fine, because of the bug in the PMIC driver, which
used incorrect step value for that regulator. It interpreted the voltage
value set by the bootloader as 1225mV and kept it unchanged. The regulator
driver has been however fixed recently in the commit 56b5d4ea77
("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results
in reading the proper buck8 value and forcing it to 1500mV on boot. This
is not enough for proper board operation and results in eMMC errors during
heavy IO traffic. Increasing maximum voltage value for buck8 restores
original driver behavior and fixes eMMC issues.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 86a2d2ac5e ("ARM: dts: Add dts file for Odroid XU3 board")
Fixes: 56b5d4ea77 ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This disables the old FBDEV driver and enables the PL111
DRM driver on the SPEAr3xx.
There are some device trees in the kernel that switches
the DT node for the PL110 to "okay" but none of these
have any display defined, so we can safely switch to this
driver before we get any users starting to define
displays. Let them do it on top of the new driver
infrastructure instead.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the NHK8815 defconfig to reflect the recent
structural changes in Kconfigs all over the kernel:
- PREEMPT option was moved around
- MODULES options were moved around
- MTD_NAND options were moved around
- INPUT_MOUSEDEV doesn't have to be explicitly unselected
anymore (not on by default)
- DEBUG_GPIO should really not be in any default config
- MMC_BLOCK_BOUNCE is gone from Kconfig
- CRYPTO options were moved around
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DPIO driver
- Add support for cache stashing and enable it in dpaa2-eth driver
GUTS driver
- Make fsl_guts_get_svr() API internal in favor of more generic
soc_device_match()
-----BEGIN PGP SIGNATURE-----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=tNfD
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-next-v5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.1 take4
DPIO driver
- Add support for cache stashing and enable it in dpaa2-eth driver
GUTS driver
- Make fsl_guts_get_svr() API internal in favor of more generic
soc_device_match()
* tag 'soc-fsl-next-v5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
dpaa2-eth: configure the cache stashing amount on a queue
soc: fsl: dpio: configure cache stashing destination
soc: fsl: dpio: enable frame data cache stashing per software portal
soc: fsl: guts: make fsl_guts_get_svr() static
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CONFIG_SND_PXA2XX_AC97 driver is for the old AC97 bus implementation,
and conflicts with all the new-style AC97 drivers after the conversion,
so the drivers we want all get turned off.
Not disabling the symbol however does the right thing, and we get
the drivers that are selectively enabled here.
Fixes: 25540f68c8 ("ASoC: pxa: change ac97 dependencies")
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- dual license for optee_msg.h and optee_smc.h
Generic
- add cancellation support to client interface
-----BEGIN PGP SIGNATURE-----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=h0Es
-----END PGP SIGNATURE-----
Merge tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE driver
- dual license for optee_msg.h and optee_smc.h
Generic
- add cancellation support to client interface
* tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: update optee_msg.h and optee_smc.h to dual license
tee: add cancellation support to client interface
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
kernel/events/core.c: In function ‘perf_event_parse_addr_filter’:
kernel/events/core.c:9154:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
kernel = 1;
~~~~~~~^~~
kernel/events/core.c:9156:3: note: here
case IF_SRC_FILEADDR:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190212205430.GA8446@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge the ipv4 and ipv6 nat chain type. This is the last
missing piece which allows to provide inet family support
for nat in a follow patch.
The kconfig knobs for ipv4/ipv6 nat chain are removed, the
nat chain type will be built unconditionally if NFT_NAT
expression is enabled.
Before:
text data bss dec hex filename
1576 896 0 2472 9a8 nft_chain_nat_ipv4.ko
1697 896 0 2593 a21 nft_chain_nat_ipv6.ko
After:
text data bss dec hex filename
1832 896 0 2728 aa8 nft_chain_nat.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The family specific masq modules are way too small to warrant
an extra module, just place all of them in nft_masq.
before:
text data bss dec hex filename
1001 832 0 1833 729 nft_masq.ko
766 896 0 1662 67e nft_masq_ipv4.ko
764 896 0 1660 67c nft_masq_ipv6.ko
after:
2010 960 0 2970 b9a nft_masq.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
before:
text data bss dec hex filename
990 832 0 1822 71e nft_redir.ko
697 896 0 1593 639 nft_redir_ipv4.ko
713 896 0 1609 649 nft_redir_ipv6.ko
after:
text data bss dec hex filename
1910 960 0 2870 b36 nft_redir.ko
size is reduced, all helpers from nft_redir.ko can be made static.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use struct device_attribute instead of struct idletimer_tg_attr, and
the correct callback function type to avoid indirect call mismatches
with Control Flow Integrity checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
CONNTRACK_LOCKS is divisor when computer array index, if it is power of
2, compiler will optimize modulo operation as bitwise AND, or else
modulo will lower performance.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check the result of dereferencing base_chain->stats, instead of result
of this_cpu_ptr with NULL.
base_chain->stats maybe be changed to NULL when a chain is updated and a
new NULL counter can be attached.
And we do not need to check returning of this_cpu_ptr since
base_chain->stats is from percpu allocator if it is non-NULL,
this_cpu_ptr returns a valid value.
And fix two sparse error by replacing rcu_access_pointer and
rcu_dereference with READ_ONCE under rcu_read_lock.
Thanks for Eric's help to finish this patch.
Fixes: 009240940e ("netfilter: nf_tables: don't assume chain stats are set when jumplabel is set")
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Followup to a173f066c7 ("netfilter: bridge: Don't sabotage nf_hook
calls from an l3mdev"). Some packets (e.g., ndisc) do not have the skb
device flipped to the l3mdev (e.g., VRF) device. Update ip_sabotage_in
to not drop packets for slave devices too. Currently, neighbor
solicitation packets for 'dev -> bridge (addr) -> vrf' setups are getting
dropped. This patch enables IPv6 communications for bridges with an
address that are enslaved to a VRF.
Fixes: 73e20b761a ("net: vrf: Add support for PREROUTING rules on vrf device")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sctp_csum_check() is called by sctp_s/dnat_handler() where it calls
skb_make_writable() to ensure sctphdr to be linearized.
So there's no need to get sctphdr by calling skb_header_pointer()
in sctp_csum_check().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The proto in struct xt_match and struct xt_target is u16, when
calling xt_check_target/match, their proto argument is u8,
and will cause truncation, it is harmless to ip packet, since
ip proto is u8
if a etable's match/target has proto that is u16, will cause
the check failure.
and convert be16 to short in bridge/netfilter/ebtables.c
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The recent commit got this test wrong, it declared the assembler
symbols the wrong way, and also used the wrong symbol name
(xxx_start rather than start_xxx, see asm/head-64.h).
Fixes: ccd477028a ("powerpc/64s: Fix HV NMI vs HV interrupt recoverability test")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The metadata_dst does not initialize the dst_cache field, this causes
problems to ip_md_tunnel_xmit() since it cannot use this cache, hence,
Triggering a route lookup for every packet.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
TCP resets cause instant transition from established to closed state
provided the reset is in-window. Endpoints that implement RFC 5961
require resets to match the next expected sequence number.
RST segments that are in-window (but that do not match RCV.NXT) are
ignored, and a "challenge ACK" is sent back.
Main problem for conntrack is that its a middlebox, i.e. whereas an end
host might have ACK'd SEQ (and would thus accept an RST with this
sequence number), conntrack might not have seen this ACK (yet).
Therefore we can't simply flag RSTs with non-exact match as invalid.
This updates RST processing as follows:
1. If the connection is in a state other than ESTABLISHED, nothing is
changed, RST is subject to normal in-window check.
2. If the RSTs sequence number either matches exactly RCV.NXT,
connection state moves to CLOSE.
3. The same applies if the RST sequence number aligns with a previous
packet in the same direction.
In all other cases, the connection remains in ESTABLISHED state.
If the normal-in-window check passes, the timeout will be lowered
to that of CLOSE.
If the peer sends a challenge ack, connection timeout will be reset.
If the challenge ACK triggers another RST (RST was valid after all),
this 2nd RST will match expected sequence and conntrack state changes to
CLOSE.
If no challenge ACK is received, the connection will time out after
CLOSE seconds (10 seconds by default), just like without this patch.
Packetdrill test case:
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 win 64240 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
// Receive a segment.
0.210 < P. 1:1001(1000) ack 1 win 46
0.210 > . 1:1(0) ack 1001
// Application writes 1000 bytes.
0.250 write(4, ..., 1000) = 1000
0.250 > P. 1:1001(1000) ack 1001
// First reset, old sequence. Conntrack (correctly) considers this
// invalid due to failed window validation (regardless of this patch).
0.260 < R 2:2(0) ack 1001 win 260
// 2nd reset, but too far ahead sequence. Same: correctly handled
// as invalid.
0.270 < R 99990001:99990001(0) ack 1001 win 260
// in-window, but not exact sequence.
// Current Linux kernels might reply with a challenge ack, and do not
// remove connection.
// Without this patch, conntrack state moves to CLOSE.
// With patch, timeout is lowered like CLOSE, but connection stays
// in ESTABLISHED state.
0.280 < R 1010:1010(0) ack 1001 win 260
// Expect challenge ACK
0.281 > . 1001:1001(0) ack 1001 win 501
// With or without this patch, RST will cause connection
// to move to CLOSE (sequence number matches)
// 0.282 < R 1001:1001(0) ack 1001 win 260
// ACK
0.300 < . 1001:1001(0) ack 1001 win 257
// more data could be exchanged here, connection
// is still established
// Client closes the connection.
0.610 < F. 1001:1001(0) ack 1001 win 260
0.650 > . 1001:1001(0) ack 1002
// Close the connection without reading outstanding data
0.700 close(4) = 0
// so one more reset. Will be deemed acceptable with patch as well:
// connection is already closing.
0.701 > R. 1001:1001(0) ack 1002 win 501
// End packetdrill test case.
With patch, this generates following conntrack events:
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 120 FIN_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 60 CLOSE_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
Without patch, first RST moves connection to close, whereas socket state
does not change until FIN is received.
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Change the data type of the following variables from int to bool
across ipvs code:
- found
- loop
- need_full_dest
- need_full_svc
- payload_csum
Also change the following functions to use bool full_entry param
instead of int:
- ip_vs_genl_parse_dest()
- ip_vs_genl_parse_service()
This patch does not change any functionality but makes the source
code slightly easier to read.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch fix compilation error in 32-bit ARM architecture regarding
division of 2 64-bit variables.
Use the kernel do_div() macro, which is implemented per architecture, for
doing these divisions instead of using the / operator.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since 7c5925afbc (PCI: dwc: Move MSI IRQs allocation to IRQ domains
hierarchical API) the MSI init claims one of the controller IRQs as a
chained IRQ line for the MSI controller. On some designs, like the i.MX6,
this line is shared with a PCIe legacy IRQ. When the line is claimed for
the MSI domain, any device trying to use this legacy IRQs will fail to
request this IRQ line.
As MSI and legacy IRQs are already mutually exclusive on the DWC core,
as the core won't forward any legacy IRQs once any MSI has been enabled,
users wishing to use legacy IRQs already need to explictly disable MSI
support (usually via the pci=nomsi kernel commandline option). To avoid
any issues with MSI conflicting with legacy IRQs, just skip all of the
DWC MSI initalization, including the IRQ line claim, when MSI is disabled.
Fixes: 7c5925afbc ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API")
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: stable@vger.kernel.org
Remove the duplicate implementation of cpumask_to_vpset() and use the
shared implementation. Export hv_max_vp_index, which is required by
cpumask_to_vpset().
Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Remove a duplicate definition of VP set (hv_vp_set) and use the common
definition (hv_vpset) that is used in other places.
Change the order of the members in struct hv_pcibus_device so that the
declaration of retarget_msi_interrupt_params is the last member. Struct
hv_vpset, which contains a flexible array, is nested two levels deep in
struct hv_pcibus_device via retarget_msi_interrupt_params.
Add a comment that retarget_msi_interrupt_params should be the last
member of struct hv_pcibus_device.
Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Because Hyper-V requires that hypercall arguments be aligned on an 8
byte boundary, add __aligned(8) to struct retarget_msi_interrupt.
Link: https://lore.kernel.org/lkml/87k1hlqlby.fsf@vitty.brq.redhat.com/
Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The PCIE_AXI_WINDOW0 register defines the inbound window size for
requests coming from PCI endpoints. Requests outside of this window will
be treated as unsupported requests.
Enlarge this window size from 2^31 to 2^33 to support a 8GB address
space (which gives endpoints DMA access to full 4GB DRAM address range
- physical DRAM starts at 0x40000000).
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Mediatek's HW assigns a MMIO address range (typically starts from
0x20000000 to 0x2fffffff for both mt2712 and mt7622) for PCI usage.
This MMIO address space represents the address space that can
be allocated to PCI devices through Base Address Registers.
Even though the full MMIO address range is available to be allocated, it
should be enabled by the PCIE_AHB_TRANS_BASE register in the host
controller and the size that is enabled is determined by AHB2PCIE_SIZE
bits in this register.
Owing to a bug in the MMIO window size computation, current code does
not enable the full size of the available MMIO address range in the
PCI host controller; if the PCI devices BARs requested size exceeds the
size enabled through the PCIE_AHB_TRANS_BASE register the requests
targeting the disabled address address space will be blocked by the root
complex causing a system error.
Existing code has never run into a system error in production because
even half of the enabled MMIO range (128MB) is big enough for typical
devices BAR requests (4MB) but the full MMIO address range should
be enabled regardless.
Fix the MMIO window size computation by using resource_size(mem) instead
of mem->end - mem->start.
Since the MMIO window size for both MT2712 and MT7622 is 0x10000000,
this change will update the parameter passed to fls() from 0xfffffff to
0x10000000 and calculate the whole memory mapped IO range size
correctly.
Detected through coccinelle semantic patch (and related warning):
scripts/coccinelle/api/resource_size.cocci:
pcie-mediatek.c:720:13-16: WARNING: Suspicious code. resource_size is maybe missing with mem
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
If a PCA953x gpio was used as an interrupt and then released,
the shutdown function was trying to extract the pca953x_chip
pointer directly from the irq_data, but in reality was getting
the gpio_chip structure.
The net effect was that the subsequent writes to the data
structure corrupted data in the gpio_chip structure, which wasn't
immediately obvious until attempting to use the GPIO again in the
future, at which point the kernel panics.
This fix correctly extracts the pca953x_chip structure via the
gpio_chip structure, as is correctly done in the other irq
functions.
Fixes: 0a70fe00ef ("gpio: pca953x: Clear irq trigger type on irq shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Walton <mark.walton@serialtek.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert various multi-bit fields to be defined using GENMASK/FIELD_PREP.
This way bit field boundaries are defined in a single place only, as
well as defined in a way that makes it easier to verify them against the
reference manual. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Default implementation of pcie_rd_other_conf() and
dw_pcie_wd_other_conf() share more than 80% of their code. Move shared
code into a dedicated subroutine and convert pcie_rd_other_conf() and
dw_pcie_wd_other_conf() to use it. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Make the intent a bit more clear as well as get rid of explicit
arithmetic by using IS_ALIGNED() to determine if "addr" is aligned to
"size". No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
The PCIe IP block has an additional clock, "pcie_aux", that needs to
be controlled by the driver. Add code to support it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
After tearing down a pasid entry, the domain id is used to
invalidate the translation caches. Retrieve the domain id
from the pasid entry value before clearing the pasid entry.
Otherwise, we will always use domain id 0.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Fixes: 6f7db75e1c ("iommu/vt-d: Add second level page table interface")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel IOMMU could be turned off with intel_iommu=off. If Intel
IOMMU is off, the intel_iommu struct will not be initialized.
When device drivers call intel_svm_bind_mm(), the NULL pointer
reference will happen there.
Add dmar_disabled check to avoid NULL pointer reference.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 2f26e0a9c9 ("iommu/vt-d: Add basic SVM PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Otherwise, the translation type field of a context entry for
a PCI device will always be 0. All translated DMA requests
will be blocked by IOMMU. As the result, the PCI devices with
PCI ATS (device IOTBL) support won't work as expected.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Fixes: 7373a8cc38 ("iommu/vt-d: Setup context and enable RID2PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit fb58fdcd29 ("iommu/vt-d: Do not enable ATS for untrusted
devices") disables ATS support on the devices which have been marked
as untrusted. Unfortunately this is not enough to fix the DMA attack
vulnerabiltiies because IOMMU driver allows translated requests as
long as a device advertises the ATS capability. Hence a malicious
peripheral device could use this to bypass IOMMU.
This disables the ATS support on untrusted devices by clearing the
internal per-device ATS mark. As the result, IOMMU driver will block
any translated requests from any device marked as untrusted.
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: fb58fdcd29 ("iommu/vt-d: Do not enable ATS for untrusted devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
