It fixes a boot failure on imx53-qsb board with a DA9053 PMIC, which is
caused by the regulator core change, commit fa93fd4ecc ("regulator:
core: Ensure we are at least in bounds for our constraints").
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYKnQ1AAoJEFBXWFqHsHzOyEYH/0F1TKtmJwLeDBKBinmeG0wx
IX/0mXCV0E72T7W6PuifofG7H9jax9UY8qGyDl9+h/dMBQCaKPfXDo6wg5FoXaBe
UAQVHbRbEuazI2xW0UWeiywt6soGBe1/iNpt+OXXfmJY77vS5nuGfFCLGey6+uTe
WeGi3J6g2Oxa65FndvfTm5dNj6vCa3VHs5UKQKCId3KoTjuLZu4EUrN81e47tkmJ
pmzaGBfAUyvACfwkITzc6rAbBp29FtxMK52ieuh+w4L3DWa3kpCabHPMIAeP8C9P
GQ80PTyfs/F163yYM6dWRipwhz/XJhjtT8SWBG/hnYBJDEHOua4uqW3YcoNdm7E=
=xunY
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.9, 2nd round:
It fixes a boot failure on imx53-qsb board with a DA9053 PMIC, which is
caused by the regulator core change, commit fa93fd4ecc ("regulator:
core: Ensure we are at least in bounds for our constraints").
* tag 'imx-fixes-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx53-qsb: Fix regulator constraints
Signed-off-by: Olof Johansson <olof@lixom.net>
features printed, all these are quite trivial and tiny. The omap5 jack
detection and gpadc patches are not strictly fixes, but I wanted to get
binding document typo fixed before it pops up on other boards. The
gpadc one liner was in the same series and I applied and pushed it out
already before noticing it could have waited. The list of changes is:
- Fix omap3 SoC features printed
- Make sure OMAP_INTERCONNECT is selected for am43xx only configurations
- Add missing memory node for torpedo
- Initialize uart4_mask properly to avoid writing garbage to PRM registers
- Fix NULL pointer dereference for omap4 volt_data
- Add alias for omap5 gpadc needed by iio drivers
- Enable omap5 jack headset jack detection and fix it's binding typo
- Add missing memory node for logicpd-som-lv
- Fix wrong SMPS6 voltage for VDD-DDR3 for omap5
-----BEGIN PGP SIGNATURE-----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=LgIW
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.9/fixes-for-rc-cycle' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.9-rc cycle. Except for the omap3 fix for the SoC
features printed, all these are quite trivial and tiny. The omap5 jack
detection and gpadc patches are not strictly fixes, but I wanted to get
binding document typo fixed before it pops up on other boards. The
gpadc one liner was in the same series and I applied and pushed it out
already before noticing it could have waited. The list of changes is:
- Fix omap3 SoC features printed
- Make sure OMAP_INTERCONNECT is selected for am43xx only configurations
- Add missing memory node for torpedo
- Initialize uart4_mask properly to avoid writing garbage to PRM registers
- Fix NULL pointer dereference for omap4 volt_data
- Add alias for omap5 gpadc needed by iio drivers
- Enable omap5 jack headset jack detection and fix it's binding typo
- Add missing memory node for logicpd-som-lv
- Fix wrong SMPS6 voltage for VDD-DDR3 for omap5
* tag 'omap-for-v4.9/fixes-for-rc-cycle' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
ARM: omap3: Add missing memory node in SOM-LV
ASoC: omap-abe-twl6040: fix typo in bindings documentation
dts: omap5: board-common: enable twl6040 headset jack detection
dts: omap5: board-common: add phandle to reference Palmas gpadc
ARM: OMAP2+: avoid NULL pointer dereference
ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
ARM: dts: omap3: Fix memory node in Torpedo board
ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
ARM: OMAP3: Fix formatting of features printed
Signed-off-by: Olof Johansson <olof@lixom.net>
All of them are fixes for arm64 device tree
- 2 for the SPI node on the Armada 7K/8K
- 1 for the clock node on the Armada 37xx
-----BEGIN PGP SIGNATURE-----
iGoEABECACoFAlgk6sUjHGdyZWdvcnkuY2xlbWVudEBmcmVlLWVsZWN0cm9ucy5j
b20ACgkQCwYYjhRyO9VwEgCdGuixX9TYgWna2/PdhtVs5JXdW98Amwb054ygu7dw
2ONd6XGynL1PpVhQ
=qm28
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.9-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 4.9 (part 1)
All of them are fixes for arm64 device tree
- 2 for the SPI node on the Armada 7K/8K
- 1 for the clock node on the Armada 37xx
* tag 'mvebu-fixes-4.9-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers
arm64: dts: marvell: fix clocksource for CP110 slave SPI0
arm64: dts: marvell: Fix typo in label name on Armada 37xx
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable additional options necessary to boot rk3399-based boards to
boot from either emmc or usb devices, like the arasan sdhci and its phy
as well as the usb2 phy and general rockchip power-domain support.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Many rockchip based arm64 boards use RK808 as PMIC, so
enabe it here let the board bootup normally.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[added rk808-rtc as module and rk808-clk output built in]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2C and MMC are very basic modules for a board to bootup, as I2C always
used to configure PMIC and MMC devices often used to store filesytem.
So enable them here to let the rockchip based arm64 boards can bootup.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Current multi-buffer hash implementations have a restriction on the total
length of a hash job to 512MB. Hashing larger buffers will result in an
incorrect hash. This extends the limit to 2^62 - 1.
Signed-off-by: Greg Tucker <greg.b.tucker@intel.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tvrtko needs
commit b3c11ac267
Author: Eric Engestrom <eric@engestrom.ch>
Date: Sat Nov 12 01:12:56 2016 +0000
drm: move allocation out of drm_get_format_name()
to be able to apply his patches without conflicts.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
There is no drivers using those fields so remove them and
the remaining initializations.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This patch adds DMA slave map tables to the pl080 devices's
platform_data in order to support the new channel request API.
A few devices for which there was no DMA support with current
code are omitted in the tables.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
RDPID is a new instruction that reads MSR_TSC_AUX quickly. This
should be considerably faster than reading the GDT. Add a
cpufeature for it and use it from __vdso_getcpu() when available.
Tested-by: Megha Dey <megha.dey@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4f6c3a22012d10f1c65b9ca15800e01b42c7d39d.1479320367.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
No need to duplicate the same define everywhere. Since
the only user is stop-machine and the only provider is
s390, we can use a default implementation of cpu_relax_yield()
in sched.h.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-s390 <linux-s390@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1479298985-191589-1-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When show_trace_log_lvl() is called from show_regs(), it completely
fails to dump the stack. This bug was introduced when
show_stack_log_lvl() was removed with the following commit:
0ee1dd9f5e ("x86/dumpstack: Remove raw stack dump")
Previous callers of that function now call show_trace_log_lvl()
directly. That resulted in a subtle change, in that the 'stack'
argument can now be NULL in certain cases.
A NULL 'stack' pointer means that the stack dump should start from the
topmost stack frame unless 'regs' is valid, in which case it should
start from 'regs->sp'.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0ee1dd9f5e ("x86/dumpstack: Remove raw stack dump")
Link: http://lkml.kernel.org/r/c551842302a9c222d96a14e42e4003f059509f69.1479362652.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The latest binutils are warning about a .fill directive with an explicit
value in a .bss section:
arch/x86/kernel/head_32.S: Assembler messages:
arch/x86/kernel/head_32.S:677: Warning: ignoring fill value in section `.bss..page_aligned'
arch/x86/kernel/head_32.S:679: Warning: ignoring fill value in section `.bss..page_aligned'
This comes from the 'ENTRY()' macro padding the space between the symbols
with 'nop' via:
.align 4,0x90
Open-coding the .globl directive without the padding avoids that warning,
as all the symbols are already page aligned.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161116141726.2013389-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Version 3.00 of the ISA states that the PATS (partition table size) field
of the PTCR (partition table control register) and the PRTS (process table
size) field of the partition table entry must both be less than or equal
to 24. However the actual size of the partition and process tables is equal
to 2 to the power of 12 plus the PATS and PRTS fields, respectively. This
means that the max allowable size of each of these tables is 2^36 or 64GB
for both.
Thus when checking the size shift for each we should be checking for values
of greater than 36 instead of the current check for shifts larger than 24
and 23.
Fixes: 2bfd65e45e
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Useful to be able to dump the kernel hash page table to check
which pages are hashed along with their sizes and other details.
Add a debugfs file to check the hash page table. If radix is enabled
(and so there is no hash page table) then this file doesn't exist. To
use this the PPC_PTDUMP config option must be selected.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
[mpe: Fix build with SPARSEMEM_VMEMMAP=n & PSERIES=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Useful to be able to dump the kernels page tables to check permissions
and memory types - derived from arm64's implementation.
Add a debugfs file to check the page tables. To use this the PPC_PTDUMP
config option must be selected.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently there's some CMO (Cooperative Memory Overcommit) code, in
plpar_wrappers.h. Some of it is #ifdef CONFIG_PSERIES and some of it
isn't. The end result being if a file includes plpar_wrappers.h it won't
build with CONFIG_PSERIES=n.
Fix it by moving the CMO code into platforms/pseries. The two hcall
wrappers can just be moved into their only caller, cmm.c, and the
accessors can go in pseries.h.
Note we need the accessors because cmm.c can be built as a module, so
there needs to be a split between the built-in code vs the module, and
that's achieved by using those accessors.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Get rid of a useless memset from dma_alloc. Users of dma_alloc who want
zero initialized memory can get it by specifying __GFP_ZERO or use one
of the zalloc variants.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We have 2 strategies to reduce the number of RPCIT instructions:
* A HW feature indicated via the tlb_refresh bit allows us to omit RPCIT for
invalid -> valid translation-table entry updates.
* With "lazy flush" we omit RPCIT for valid -> invalid updates until we run
out of dma addresses. When we have to reuse dma addresses we issue a global
tlb flush using only one RPCIT instruction.
Currently lazy flushing depends on tlb_refresh. Since there is no technical
reason for this remove this dependency.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
__s390_dma_map_sg maps a dma-contiguous area. Although we only map
whole pages we have to take into account that the area doesn't start
or stop at a page boundary because we use the dma address to loop
over the individual sg entries. Failing to do that might lead to an
access of the wrong sg entry.
Fixes: ee877b81c6 ("s390/pci_dma: improve map_sg")
Reported-and-tested-by: Christoph Raisch <raisch@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The TOD clock offset injected by an STP sync check can be negative.
If the resulting total tod_steering_delta gets negative the kernel
will panic.
Change the type of tod_steering_delta to a signed type.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 75c7b6f3f6 ("s390/time: steer clocksource on STP sync events")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
- fix register dumps, stack dumps and stack traces that got torn due to
recent printk changes;
- wire up pkey_{mprotect,alloc,free} syscalls.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AKKC
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20161116' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix register dumps, stack dumps and stack traces that got torn due to
recent printk changes
- wire up pkey_{mprotect,alloc,free} syscalls
* tag 'xtensa-20161116' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: wire up new pkey_{mprotect,alloc,free} syscalls
xtensa: clean up printk usage for boot/crash logging
Add a few new AVX512 instruction groups/features for enumeration in
/proc/cpuinfo: AVX512IFMA and AVX512VBMI.
Clear the flags in fpu_xstate_clear_all_cpu_caps().
CPUID.(EAX=7,ECX=0):EBX[bit 21] AVX512IFMA
CPUID.(EAX=7,ECX=0):ECX[bit 1] AVX512VBMI
Detailed information of cpuid bits for the features can be found at
https://bugzilla.kernel.org/show_bug.cgi?id=187891
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Borislav Petkov <bp@alien8.de>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: mingo@elte.hu
Link: http://lkml.kernel.org/r/1479327060-18668-1-git-send-email-gayatri.kammela@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Commit 7619751f8c ("ARM: 8595/2: apply more __ro_after_init") caused
a regression with XIP kernels by moving the __ro_after_init data into
the read-only section. With XIP kernels, the read-only section is
located in read-only memory from the very beginning.
Work around this by moving the __ro_after_init data back into the .data
section, which will be in RAM, and hence will be writable.
It should be noted that in doing so, this remains writable after init.
Fixes: 7619751f8c ("ARM: 8595/2: apply more __ro_after_init")
Reported-by: Andrea Merello <andrea.merello@gmail.com>
Tested-by: Andrea Merello <andrea.merello@gmail.com> [ XIP stm32 ]
Tested-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The test is not called from any of the setup functions, so there's no
reason keeping it in the setup.c. Move it to s32c1i_selftest.c and drop
related #include directives.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This adds the GPIO names for the Raspberry Pi Zero. The GPIO lines
of the RPi Zero are almost identical to the Model A+ except:
* GPIO 35, 38, 40 and 45 are not connected
* Status LED is active low
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
There are some differences between the schematics and the official firmware
DTS [1]. So based on these additional information the following has been
changed:
* use consistent "CAM_GPIO1" for camera LED
* use consistent "CAM_GPIO0" for camera shutdown
* add "USB_LIMIT" for USB current limit (0=600mA, 1=1200mA)
[1] - https://github.com/raspberrypi/firmware/blob/master/extra/dt-blob.dts
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
We are incorrectly defining the pwr LED, attaching it to a gpio line
that is wired to the Wi-Fi SDIO module (which fails due to this).
The actual power LED is connected to the GPIO expander, which we don't
expose currently.
Fixes: 9d56c22a78 ("ARM: bcm2835: Add devicetree for the Raspberry Pi 3.")
Thanks-to: Eric Anholt <eric@anholt.net> [for clarifying we can't control the LED]
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
When the USB PHY driver was introduced the reset framework did not
have support for triggering a reset pulse for shared resets. On GXBB
however there is only one reset line for both PHYs (meaning we have a
shared reset line). With the latest changes to the reset framework and
the corresponding updates to the phy-meson8b-usb2 driver we can now pass
the reset to the second PHY as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add two new AVX512 subfeatures support for KVM guest.
AVX512_4VNNIW:
Vector instructions for deep learning enhanced word variable precision.
AVX512_4FMAPS:
Vector instructions for deep learning floating-point single precision.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: He Chen <he.chen@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
[Changed subject tags.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Internal errors were reported on 16 bit fxsave and fxrstor with ipxe.
Old Intels don't have unrestricted_guest, so we have to emulate them.
The patch takes advantage of the hardware implementation.
AMD and Intel differ in saving and restoring other fields in first 32
bytes. A test wrote 0xff to the fxsave area, 0 to upper bits of MCSXR
in the fxsave area, executed fxrstor, rewrote the fxsave area to 0xee,
and executed fxsave:
Intel (Nehalem):
7f 1f 7f 7f ff 00 ff 07 ff ff ff ff ff ff 00 00
ff ff ff ff ff ff 00 00 ff ff 00 00 ff ff 00 00
Intel (Haswell -- deprecated FPU CS and FPU DS):
7f 1f 7f 7f ff 00 ff 07 ff ff ff ff 00 00 00 00
ff ff ff ff 00 00 00 00 ff ff 00 00 ff ff 00 00
AMD (Opteron 2300-series):
7f 1f 7f 7f ff 00 ee ee ee ee ee ee ee ee ee ee
ee ee ee ee ee ee ee ee ff ff 00 00 ff ff 02 00
fxsave/fxrstor will only be emulated on early Intels, so KVM can't do
much to improve the situation.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Move the existing exception handling for inline assembly into a macro
and switch its return values to X86EMUL type.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alignments are exclusive, so 5 modes can be expressed in 3 bits.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The local variable *gpa_offset* is set but not used afterwards,
which make the compiler issue a warning with option
-Wunused-but-set-variable. Remove it to avoid the warning.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
synic_set_irq is only used in hyperv.c, and should be static to
avoid compiling warning when with -Wmissing-prototypes option.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The use of local variable *function* is not necessary here. Remove
it to avoid compiling warning with -Wunused-but-set-variable option.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_emulate_wbinvd_noskip is only used in x86.c, and should be
static to avoid compiling warning when with -Wmissing-prototypes
option.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_arm_hv_timer is only used in vmx.c, and should be static to
avoid compiling warning when with -Wmissing-prototypes option.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This enables the GPIO-b support for Broadcom NSP SoC
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
It's BCM4709A0 based device with 16 MiB flash, 128 MiB of RAM and two
PCIe based on-PCB BCM4360 chipsets.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Since early BCM5301X days we got abort handler that was removed by
commit 937b12306e ("ARM: BCM5301X: remove workaround imprecise abort
fault handler"). It assumed we need to deal only with pending aborts
left by the bootloader. Unfortunately this isn't true for BCM5301X.
When probing PCI config space (device enumeration) it is expected to
have master aborts on the PCI bus. Most bridges don't forward (or they
allow disabling it) these errors onto the AXI/AMBA bus but not the
Northstar (BCM5301X) one.
iProc PCIe controller on Northstar seems to be some older one, without
a control register for errors forwarding. It means we need to workaround
this at platform level. All newer platforms are not affected by this
issue.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The M0 processor handles interrupts for the always-on CRMU GPIO
controller. Setting the CRMU GPIO driver with the mailbox controller as
the interrupt parent allows the mailbox controller to forward interrupts
from the M0 to the GPIO driver for processing.
Reviewed-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Tested-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Shreesha Rajashekar <shreesha.rajashekar@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
