At least mips64 has ist own CAUSE macro, so rename ours to
IWL_CAUSE to fix build issues.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: c191819642 ("iwlwifi: pcie: simplify MSI-X cause mapping")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220523220300.682be2029361.I283200b18da589a975a284073dca8ed001ee107a@changeid
We're currently manually encoding a calculation here since the HW
just maps all the bits of specific registers to specific offsets,
which led to the bug fixed here previously with the Bz SW_ERROR
interrupt.
Clean up the code to only know about the mapping offset (-16 or
16 depending on the register) to avoid such issues in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120044.19abe9a4d171.I934356911277f9b2a955808763f317986f69a461@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
-----BEGIN PGP SIGNATURE-----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=ccps
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
brcmfmac
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
mac80211: Add support to trigger sta disconnect on hardware restart
mac80211: fix potential double free on mesh join
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
rtw89: 8852c: process logic efuse map
rtw89: 8852c: process efuse of phycap
rtw89: support DAV efuse reading operation
rtw89: 8852c: add chip::dle_mem
rtw89: add page_regs to handle v1 chips
rtw89: add chip_info::{h2c,c2h}_reg to support more chips
rtw89: add hci_func_en_addr to support variant generation
rtw89: add power_{on/off}_func
rtw89: read chip version depends on chip ID
rtw89: pci: use a struct to describe all registers address related to DMA channel
rtw89: pci: add V1 of PCI channel address
rtw89: pci: add struct rtw89_pci_info
rtw89: 8852c: add 8852c empty files
MAINTAINERS: add devicetree bindings entry for mt76
...
====================
Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer firmware versions will support a new queue allocation
command, in order to deal with MLD where multiple stations
are used for a single queue. Add support for the new command.
This requires some refactoring of the queue allocation API,
which now gets
- the station mask instead of the station ID
- the flags without the "enable" flag, since that's no longer
used in the new API
Additionally, this new API now requires that we remove queues
before removing a station, the firmware will no longer do that
internally. Also add support for that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.acbf22ac2b66.I2bf38578c5ca1f7ffb2011a782f772db92fc4965@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The Bz devices got a new completion descriptor again since
we only ever really used 4 out of 32 bytes anyway. Adjust
the code to deal with that. Note that the intention was to
reduce the size, but the hardware was implemented wrongly.
While at it, do some cleanups and remove the union to simplify
the code, clean up iwl_pcie_free_bd_size() to no longer need
an argument and add iwl_pcie_used_bd_size() with the logic to
selct completion descriptor size.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.bef461a04110.I90c8885550fa54eb0aaa4363d322f50e301175a6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If the device is malfunctioning and reports too short rx descriptor
length, iwl_rx_packet_payload_len() will underflow, eventually resulting
in accessing memory out of bounds and other bad things. Prevent this.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220130115024.ea00b52c6f25.I8b79b14f1af8b6f2f579f97b397b9e005fe446b1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Most of this change is a continuation of commit 403ea939ea
("iwlwifi: dbg: Mark ucode tlv data as const") propagating the
(const) type qualifier for ucode based tlv data to avoid having
the impression that it is writeable.
The other part of the change preserves the (const) type qualifier
over casts and function calls where it was previously lost.
Both changes are needed to avoid compile time errors on system with
more strict error settings, in this case found with clang on FreeBSD.
Sponsored by: The FreeBSD Foundation
Signed-off-by: Bjoern A. Zeeb <bz@FreeBSD.ORG>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[fix double word in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.3230c41312fc.I0032c597984834258d5a79b97052ed83dbe53b80@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In order to de-const variables simply casting through (void *) is
not enough: "cast from 'const .. *' to 'void *' drops const qualifier".
Cast through (uintptr_t) as well [1] to make this compile on systems
with more strict requirements.
In addition passing const void *data to dma_map_single() also
drops the (const) qualifier. De-constify on variable on assignment
which may be overwritten later. In either case the (void *) cast
to dma_map_single() is not needed (anymore) either.
[1] See __DECONST() in sys/sys/cdefs.h in FreeBSD
Sponsored by: The FreeBSD Foundation
Signed-off-by: Bjoern A. Zeeb <bz@FreeBSD.ORG>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.eb696eb56bf6.Ide1dd041f9b908c5154a600286a7453750b0704a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The order of arguments for iwl_cmd_id() is confusing, and the
version is always 0 and thus a useless argument. Prefer the
WIDE_ID() macro (which needs to be a macro due to use in switch
cases etc.) over the iwl_cmd_id() function.
Obviously done with spatch:
@@
expression G, C;
@@
-iwl_cmd_id(C, G, 0)
+WIDE_ID(G, C)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.cc4f9d1a2e9b.Ieb023cd773ea22e819d1ef1c37ae857ecc1a839d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet. Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.
Fix that by ignoring the interrupt if prph_info is not set yet.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The original implementation checked the HW family, and as a result
of that used different addresses for the prph registers.
The old HWs addresses start with 0xa****** and the newer
ones start with 0xd******.
For this there are iwl_read/write_umac_prph functions that just add the
diff in the address automatically (in this case 0x300000), so the code will
be common for all HWs
In the original implementation the address given already had the 0xd******
causing the address to become 0x10***** (after adding the offset)
Change the registers to start with 0xa*****.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.db2722547eb2.I03dce63698befc2fd9105111c3015b8d6e36868a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* A few mei fixes;
* Some improvements in D3;
* Support for new FW API commands;
* Fixes and cleanups in device configurations;
* Support some new FW API command versions;
* Fix WGDS revision 3 reading bug;
* Some firmware debugging improvements;
* Fixes for in device configuration structures;
* Improvements in the session protection code;
* Support SAR GEO Offset Mapping (SGOM) via BIOS;
* Continued work on the new Bz device family;
* Some more firmware debugging improvements;
* Support new FW API version 68;
* Add some new device IDs;
* Some other small fixes, clean-ups and improvements.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAmGwdr4ACgkQoUecoho8
xfrRjg/9Ffb5e5xIaRW01WCYuF+KUes9fxVTYmniv/5LiN5cUOADUXx5EkkBiM2v
TbHOLil1YvUgpfdGk75Hp2QwGLuEvhiLBxenCPKDKiWb3cCoB/0X3R0PglBGkCuT
jGSQF6kVnws6acobUozgua7iuBrng2kWgCZ50LpmxOjWYteBA1SYqIP9ywVLEHLi
G0MX23gbVwsUKgukyfS2C5vRpUnYoyZ585vztUY7+527MM/07l9srDYUZ1hHW8hR
ypXN44h+2zyeoufXmob8KY3noCp+h6KE8wlv5qVQjgwY+Zp2UfIGGnHR06fk2O3i
01JKFxlCx+6AyU7wJHvHlPd12EtiCwRdDey+29/QKxuU6jpV1k11sNxXoKQeP4Ol
5sSh1p1r9AVzo9F3wNkmyEukYyrMe52f+cP44Zvo5+GoMeSvp1VbNpxcVMQLSBIA
ZR4MInMaFi6YeWknNll/hzeQEhOlo/QpPhnENeN9K3i5Aa8af9sOIR14CBDi27Ed
FcQz83SxC0hmkepLaibEO8QHHFBNOHm2/iugSoUrKj0cmsyUuDthxPCo5FrJTS+k
KJbtH7OS5wXWCz0lML+uNCGcZXszV12malaedTtqtgl9Q3/mPuCQy1tRmVpQ/kTE
aMcxIX9MsPy8534x2kdpcpWwwi3iWLafl7QuMiHMjhRG+Thg+5U=
=tgbw
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2021-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
first set of iwlwifi patches for v5.17
* A few mei fixes;
* Some improvements in D3;
* Support for new FW API commands;
* Fixes and cleanups in device configurations;
* Support some new FW API command versions;
* Fix WGDS revision 3 reading bug;
* Some firmware debugging improvements;
* Fixes for in device configuration structures;
* Improvements in the session protection code;
* Support SAR GEO Offset Mapping (SGOM) via BIOS;
* Continued work on the new Bz device family;
* Some more firmware debugging improvements;
* Support new FW API version 68;
* Add some new device IDs;
* Some other small fixes, clean-ups and improvements.
First set of patches for v5.17. The biggest change is the iwlmei
driver for Intel's AMT devices. Also now WCN6855 support in ath11k
should be usable.
Major changes:
ath10k
* fetch (pre-)calibration data via nvmem subsystem
ath11k
* enable 802.11 power save mode in station mode for qca6390 and wcn6855
* trace log support
* proper board file detection for WCN6855 based on PCI ids
* BSS color change support
rtw88
* add debugfs file to force lowest basic rate
* add quirk to disable PCI ASPM on HP 250 G7 Notebook PC
mwifiex
* add quirk to disable deep sleep with certain hardware revision in
Surface Book 2 devices
iwlwifi
* add iwlmei driver for co-operating with Intel's Active Management
Technology (AMT) devices
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmGvclcRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtK6wgAoOoT83JKMreXlXXhVegqlJbC3HyElF5r
DJlpDDJkJUT9airol2nd0yFfP+5WFyQPrt5shsQmqz43U4jlgfFpFXZIjQufK+gn
VAGvVGfsanRXEFlsVgFZeSZvAEyEyNSggxADC03Ky0xtiCGc89r2o71jD3HA/ZzO
1X8gbKH7YLWj4G/GQkrKsvIAwzoZXT7nwQSdW73M8QVzk4OSNhLBLdiqKYq0yViM
7Ea2Vj27hiyk/RXNUZHy+bKa8vKN5sA91VHJ836aPZBQ4OLotGzF3AgHfgIhIpdr
hI4BVJbngpjQho1EkCnZZuISPes0YQWJB5hK5xpL98yuIL4wyJRfeQ==
=I8Dj
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
First set of patches for v5.17. The biggest change is the iwlmei
driver for Intel's AMT devices. Also now WCN6855 support in ath11k
should be usable.
Major changes:
ath10k
* fetch (pre-)calibration data via nvmem subsystem
ath11k
* enable 802.11 power save mode in station mode for qca6390 and wcn6855
* trace log support
* proper board file detection for WCN6855 based on PCI ids
* BSS color change support
rtw88
* add debugfs file to force lowest basic rate
* add quirk to disable PCI ASPM on HP 250 G7 Notebook PC
mwifiex
* add quirk to disable deep sleep with certain hardware revision in
Surface Book 2 devices
iwlwifi
* add iwlmei driver for co-operating with Intel's Active Management
Technology (AMT) devices
* tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (87 commits)
iwlwifi: mei: fix linking when tracing is not enabled
rtlwifi: rtl8192de: Style clean-ups
mwl8k: Use named struct for memcpy() region
intersil: Use struct_group() for memcpy() region
libertas_tf: Use struct_group() for memcpy() region
libertas: Use struct_group() for memcpy() region
wlcore: no need to initialise statics to false
rsi: Fix out-of-bounds read in rsi_read_pkt()
rsi: Fix use-after-free in rsi_rx_done_handler()
brcmfmac: Configure keep-alive packet on suspend
wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup()
iwlwifi: mvm: read the rfkill state and feed it to iwlmei
iwlwifi: mvm: add vendor commands needed for iwlmei
iwlwifi: integrate with iwlmei
iwlwifi: mei: add debugfs hooks
iwlwifi: mei: add the driver to allow cooperation with CSME
mei: bus: add client dma interface
mwifiex: Ignore BTCOEX events from the 88W8897 firmware
mwifiex: Ensure the version string from the firmware is 0-terminated
mwifiex: Add quirk to disable deep sleep with certain hardware revision
...
====================
Link: https://lore.kernel.org/r/20211207144211.A9949C341C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On Bz devices, UREG_DOORBELL_TO_ISR6_NMI_BIT no longer actually
triggers an NMI. So instead of setting BIT(0) | BIT(1) for the
reset flow, we need to just set BIT(1) and then force the NMI
in the new way.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204174546.6b56e7ee1773.I71cba66e17cc0daabc5ad7abd88763674b625c82@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In most cases, unless shutting down the NIC, we really need
to retake ownership after doing a software reset of the NIC.
Encode that into the API so we "automatically" do it, even
in case of workarounds, and don't keep forgetting it like a
few of the places we have did.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204174545.458f9d98ac21.I40b9a22df1ab8178cc838fc83d5190e689dfac6a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Instead of using two bits in the doorbell interrupt, the new Bz
devices have a new CSR_IPC_SLEEP_CONTROL register to let drivers
indicate the desired transition before triggering the doorbell
interrupt.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.63f3d150689a.Iaeb6f9b007e81b1a5a02144b0281935e4613cb78@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We have a MAC component (which is inside the SoC) and it has several
different HW steps. 3 bits used to be enough but now we need 4-bits
to represent all the different steps.
Properly support 4-bits in the MAC step value by refactoring all the
current handling of the MAC step/dash.
Already from family 8000 and up the dash (bits 0-1) no longer exists
and the step (until 8000 bits 2-3) consists of the dash bits as well.
To do this remove the CSR_HW_REV_STEP and the CSR_HW_REV_DASH
macros, replace them with CSR_HW_REV_STEP_DASH and add hw_rev_step
into the trans struct.
In addition remove the CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP and
CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH macros and create a new macro
combining the 2 (this way we don't need shifting or anything else.)
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Mike Golant <michael.golant@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211207160459.2e81a14d1f80.Ia5287e37fb3439d805336837361f6491f958e465@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
iwlmei needs to know about the follwing events:
* Association
* De-association
* Country Code change
* SW Rfkill change
* SAR table changes
iwlmei can take the device away from us, so report the new
rfkill type when this happens.
Advertise the required data from the CSME firmware to the
usersapce: mostly, the AP that the CSME firmware is currently
associated to in case there is an active link protection
session.
Generate the HOST_ASSOC / HOST_DISSASSOC messages.
Don't support WPA1 (non-RSNA) for now.
Don't support shared wep either.
We can then determine the AUTH parameter by checking the AKM.
Feed the cipher from the key installation.
SW Rfkill will be implemented later when cfg80211 will
allow us to read the SW Rfkill state.
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v7: Ayala added her signed-off
remove pointless function declaration
fix a bug due to merge conflict in the HOST_ASSOC message
v8: leave a print if we have a SAP connection on a device we do
not support (yet)
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-4-emmanuel.grumbach@intel.com
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.
Eliminate the follow smatch warning:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c:1376 iwl_pci_probe() warn:
missing error code 'ret'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 1f171f4f14 ("iwlwifi: Add support for getting rf id with blank otp")
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635838727-128735-1-git-send-email-jiapeng.chong@linux.alibaba.com
Both gcc-11 and clang point out a potential issue with integer overflow when
the iwl_dev_info_table[] array is empty. This is what clang warns:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c:1344:42: error: implicit conversion from 'unsigned long' to 'int' changes value from 18446744073709551615 to -1 [-Werror,-Wconstant-conversion]
for (i = ARRAY_SIZE(iwl_dev_info_table) - 1; i >= 0; i--) {
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
This is still harmless, as the loop correctly terminates, but adding
an extra range check makes that obvious to both readers and to the
compiler.
Fixes: 3f7320428f ("iwlwifi: pcie: simplify iwl_pci_find_dev_info()")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211118142124.526901-1-arnd@kernel.org
We currently match the list of devices from the start to
the end, but then find the *last* match, so we need to
look at each and every entry. We don't want to change the
semantics ("most generic entry must come first"), so just
change the order of matching to be back-to-front, then we
can break out once we find a match.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.abd85e1391cb.I7681fe90735044cc1c59f120e8591b7ac125535d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The "Killer(R) Wi-Fi 6 AX1650w 160MHz Wireless Network Adapter (200D2W)"
and "Killer(R) Wi-Fi 6 AX1650x 160MHz Wireless Network Adapter (200NGW)"
names couldn't match properly because the most generic entry needs to be
specified last.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.86a430e5b2ff.I7a9e89df7ddfc939690d3718d41afc934a4d4ea0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
