Page events are not issued by device on the function if
page_request_disable is set, so no need to create pages EQ.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace matching on TCP and UDP protocols with new l4_type field which
is parsed by steering for ttc_table. It is enabled by the
outer_l4_type or inner_l4_type bits in nic_rx or port_sel flow table
capabilities and used only if pcc_ifa2 bit in HCA capabilities is set.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for 800Gbps speed, link modes of 100Gbps per lane.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the kernel, the preferred types are uX.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Starting from commit
eb9b9fdcaf ("net/mlx5e: Introduce extended version for mlx5e_xmit_data")
sinfo is no longer passed as an argument to
mlx5e_xmit_xdp_frame(), the comment is inconsistent.
check_result must be zero when the packet is fragmented.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resetting stats just before some test/debug case allows us to eliminate
out the impact of previous commands. Useful in particular for the
average latency calculation.
The average_write() callback was unreachable, as "average" is a
read-only file. Extend, rename, and use it for a newly exposed
write-only "reset" file.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fill_strings() callbacks were changed to accept a **data pointer,
and not rely on propagating the index value.
Make a similar change to fill_stats() callbacks to keep the API
consistent.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ethtool_sprintf/puts() helper functions which handle the common
pattern of printing a string into the ethtool strings interface and
incrementing the string pointer by ETH_GSTRING_LEN.
Change the fill_strings callback to accept a **data pointer, and remove
the index and return value.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ethtool_sprintf/puts() helper functions which handle the common
pattern of printing a string into the ethtool strings interface and
incrementing the string pointer by ETH_GSTRING_LEN.
The int return value in mlx5e_self_test_fill_strings() is not removed as
it is still used to return the number of selftests.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ethtool_sprintf/puts() helper functions which handle the common
pattern of printing a string into the ethtool strings interface and
incrementing the string pointer by ETH_GSTRING_LEN.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi as we didn't consider it
as major enough to justify merging wireless tree to wireless-next. But
Stephen has an example merge resolution which should help with fixing
the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYNIqIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8jAf9H+o91boD34/qVdI5LWEcFhVKEkHpNtwm
Y1sTKNBEtN1Gs2zcljjO6PqN9N4v2+lA42KSpzP5M42FfpI2aATI2v8jYsKTXOl2
YVwF+8pDiAsi0YtQTxIthygjzTpsePCfj8z0xJaKGm195T+fMm9UebYETrfxxOp/
z5StsJIPI0twgSLKKUWvLpX4ESt0l0HLJY1ok99sk4Cj36EKn6b9LbBinDKr6GcQ
mGNtPyq0j4l0kS5qae9BbXZUohO54o8wiFnApdwGfA7S/kLY7eUtwZy7T050b62P
zbNafwZbIjrH7dNcGfe6Fdr7PjQYFeI5Nh7dXxqM2LJOQsYXU/tcWQ==
=WrPE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool.py depends on yml files in a specific location of the linux kernel
tree. Using relative lookup for those files means that ethtool.py would
need to be run under tools/net/ynl/. Lookup needed yml files without
depending on the current working directory that ethtool.py is invoked from.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240402204000.115081-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit implements VCT in 88E308X/88E609X Family.
It require two workarounds with some magic configuration.
Regular use require only one register configuration. But Open Circuit
require second workaround.
It cause implementation two phases for fault length measuring.
Fast Ethernet PHY have implemented very simple version of VCT. It's
complitley different than vct5 or vct7.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240402201123.2961909-3-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some PHYs can recognize during a cable test if the impedance in the cable
is okay. They can detect reflections caused by impedance discontinuity
between a regular 100 Ohm cable and an abnormal part with a higher or
lower impedance.
This commit introduces a new result code:
ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH,
which represents the results of a cable test indicating issues with
impedance integrity.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240402201123.2961909-2-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements only basic support.
It covers PHY used in multiple IC:
PHY: 88E3082, 88E3083
Switch: 88E6096, 88E6097
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240402201123.2961909-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In "struct muram_info", the 'size' field is unused.
In "struct memac_cfg", the 'fixed_link' field is unused.
Remove them.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/425222d4f6c584e8316ccb7b2ef415a85c96e455.1712084103.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
af_unix: Remove old GC leftovers.
This is a follow-up series for commit 4090fa373f ("af_unix: Replace
garbage collection algorithm.") which introduced the new GC for AF_UNIX.
Now we no longer need two ugly tricks for the old GC, let's remove them.
====================
Link: https://lore.kernel.org/r/20240401173125.92184-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the previous GC implementation, the shape of the inflight socket
graph was not expected to change while GC was in progress.
MSG_PEEK was tricky because it could install inflight fd silently
and transform the graph.
Let's say we peeked a fd, which was a listening socket, and accept()ed
some embryo sockets from it. The garbage collection algorithm would
have been confused because the set of sockets visited in scan_inflight()
would change within the same GC invocation.
That's why we placed spin_lock(&unix_gc_lock) and spin_unlock() in
unix_peek_fds() with a fat comment.
In the new GC implementation, we no longer garbage-collect the socket
if it exists in another queue, that is, if it has a bridge to another
SCC. Also, accept() will require the lock if it has edges.
Thus, we need not do the complicated lock dance.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240401173125.92184-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we passed fds, we used to bump each file's refcount twice
in scm_fp_copy() and scm_fp_dup() before linking the socket to
gc_inflight_list.
This is because we incremented the inflight count of the socket
and linked it to the list in advance before passing skb to the
destination socket.
Otherwise, the inflight socket could have been garbage-collected
in a small race window between linking the socket to the list and
queuing skb:
CPU 1 : sendmsg(X) w/ A's fd CPU 2 : close(A)
----- -----
/* Here A's refcount is 1, and inflight count is 0 */
bump A's refcount to 2 in scm_fp_copy()
bump A's inflight count to 1
link A to gc_inflight_list
decrement A's refcount to 1
/* A's refcount == inflight count, thus A could be GC candidate */
start GC
mark A as candidate
purge A's receive queue
queue skb w/ A's fd to X
/* A is queued, but all data has been lost */
After commit 4090fa373f ("af_unix: Replace garbage collection
algorithm."), we increment the inflight count and link the socket
to the global list only when queuing the skb.
The race no longer exists, so let's not clone the fd nor bump
the count in unix_attach_fds().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240401173125.92184-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to this patch, what we can see by enabling trace_tcp_send is
only happening under two circumstances:
1) active rst mode
2) non-active rst mode and based on the full socket
That means the inconsistency occurs if we use tcpdump and trace
simultaneously to see how rst happens.
It's necessary that we should take into other cases into considerations,
say:
1) time-wait socket
2) no socket
...
By parsing the incoming skb and reversing its 4-tuple can
we know the exact 'flow' which might not exist.
Samples after applied this patch:
1. tcp_send_reset: skbaddr=XXX skaddr=XXX src=ip:port dest=ip:port
state=TCP_ESTABLISHED
2. tcp_send_reset: skbaddr=000...000 skaddr=XXX src=ip:port dest=ip:port
state=UNKNOWN
Note:
1) UNKNOWN means we cannot extract the right information from skb.
2) skbaddr/skaddr could be 0
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://lore.kernel.org/r/20240401073605.37335-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introducing entry_saddr and entry_daddr parameters in this macro
for later use can help us record the reverse 4-tuple by analyzing
the 4-tuple of the incoming skb when receiving.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240401073605.37335-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For systems that use CPU isolation (via nohz_full), creating or destroying
a socket with SO_TIMESTAMP, SO_TIMESTAMPNS or SO_TIMESTAMPING with flag
SOF_TIMESTAMPING_RX_SOFTWARE will cause a static key to be enabled/disabled.
This in turn causes undesired IPIs to isolated CPUs.
So enable the static key unconditionally, if CPU isolation is enabled,
thus avoiding the IPIs.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ZgrUiLLtbEUf9SFn@tpad
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Harshitha Ramamurthy says:
====================
gve: enable ring size changes
This series enables support to change ring size via ethtool
in gve.
The first three patches deal with some clean up, setting
default values for the ring sizes and related fields. The
last two patches enable ring size changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the user to change ring size via ethtool if
supported by the device. The driver relies on the
ring size ranges queried from device to validate
ring sizes requested by the user.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to read ring size change capability and the
min and max descriptor counts from the device and store it
in the driver. Also accommodate a special case where the
device does not provide minimum ring size depending on the
version of the device. In that case, rely on default values
for the minimums.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fulfill the requirement that for GQI, the number of pages per
RX QPL is equal to the ring size. Set this value to be equal to
ring size. Because of this change, the rx_data_slot_cnt and
rx_pages_per_qpl fields stored in the priv structure are not
needed, so remove their usage. And for DQO, the number of pages
per RX QPL is more than ring size to account for out-of-order
completions. So set it to two times of rx ring size.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the DQO queue format, the gve driver stores two ring sizes
for both TX and RX - one for completion queue ring and one for
data buffer ring. This is supposed to enable asymmetric sizes
for these two rings but that is not supported. Make both fields
reference the same single variable.
This change renders reading supported TX completion ring size
and RX buffer ring size for DQO from the device useless, so change
those fields to reserved and remove related code.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Combine the gve_set_desc_cnt and gve_set_desc_cnt_dqo into
one function which sets the counts after checking the queue
format. Both the functions in the previous code and the new
combined function never return an error so make the new
function void and remove the goto on error.
Also rename the new function to gve_set_default_desc_cnt to
be clearer about its intention.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reset CGX/RPM MAC HW statistics at the time of driver probe()
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There are currently a couple of objects in `struct smc_clc_msg_proposal_area`
that contain a couple of flexible structures:
struct smc_clc_msg_proposal_area {
...
struct smc_clc_v2_extension pclc_v2_ext;
...
struct smc_clc_smcd_v2_extension pclc_smcd_v2_ext;
...
};
So, in order to avoid ending up with a couple of flexible-array members
in the middle of a struct, we use the `struct_group_tagged()` helper to
separate the flexible array from the rest of the members in the flexible
structure:
struct smc_clc_smcd_v2_extension {
struct_group_tagged(smc_clc_smcd_v2_extension_fixed, fixed,
u8 system_eid[SMC_MAX_EID_LEN];
u8 reserved[16];
);
struct smc_clc_smcd_gid_chid gidchid[];
};
With the change described above, we now declare objects of the type of
the tagged struct without embedding flexible arrays in the middle of
another struct:
struct smc_clc_msg_proposal_area {
...
struct smc_clc_v2_extension_fixed pclc_v2_ext;
...
struct smc_clc_smcd_v2_extension_fixed pclc_smcd_v2_ext;
...
};
We also use `container_of()` when we need to retrieve a pointer to the
flexible structures.
So, with these changes, fix the following warnings:
In file included from net/smc/af_smc.c:42:
net/smc/smc_clc.h:186:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
186 | struct smc_clc_v2_extension pclc_v2_ext;
| ^~~~~~~~~~~
net/smc/smc_clc.h:188:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
188 | struct smc_clc_smcd_v2_extension pclc_smcd_v2_ext;
| ^~~~~~~~~~~~~~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For short netdev holds within a function there are still a lot of
users of dev_put() rather than netdev_put(). Add DEFINE_FREE() to
allow making those safer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new guard/scoped_gard can be useful for the RTNL as well,
so add a guard definition for it. It gets used like
{
guard(rtnl)();
// RTNL held until end of block
}
or
scoped_guard(rtnl) {
// RTNL held in this block
}
as with any other guard/scoped_guard.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-01 (ice)
This series contains updates to ice driver only.
Michal Schmidt changes flow for gettimex64 to use host-side spinlock
rather than hardware semaphore for lighter-weight locking.
Steven adds ability for switch recipes to be re-used when firmware
supports it.
Thorsten Blum removes unwanted newlines in netlink messaging.
Michal Swiatkowski and Piotr re-organize devlink related code; renaming,
moving, and consolidating it to a single location. Michal also
simplifies the devlink init and cleanup path to occur under a single
lock call.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: hold devlink lock for whole init/cleanup
ice: move devlink port code to a separate file
ice: move ice_devlink.[ch] to devlink folder
ice: Remove newlines in NL_SET_ERR_MSG_MOD
ice: Add switch recipe reusing feature
ice: fold ice_ptp_read_time into ice_ptp_gettimex64
ice: avoid the PTP hardware semaphore in gettimex64 path
ice: add ice_adapter for shared data across PFs on the same NIC
====================
Link: https://lore.kernel.org/r/20240401172421.1401696-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'snps,priority' is also defined in dma/snps,dw-axi-dmac.yaml as a
uint32-array. It's preferred to have a single type for a given property
name, so update the type in snps,dwmac schema to match.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240401204422.1692359-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu says:
====================
doc/netlink: add a YAML spec for team
Add a YAML spec for team. As we need to link two objects together to form
the team module, rename team to team_core for linking.
====================
Link: https://lore.kernel.org/r/20240401031004.1159713-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated with:
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
> --spec Documentation/netlink/specs/team.yaml --source \
> -o drivers/net/team/team_nl.c
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
> --spec Documentation/netlink/specs/team.yaml --header \
> -o drivers/net/team/team_nl.h
The TEAM_ATTR_LIST_PORT in team_nl_policy is removed as it is only in the
port list reply attributes.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240401031004.1159713-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar with commit 08d323234d ("net: fou: rename the source for linking"),
We'll need to link two objects together to form the team module.
This means the source can't be called team, the build system expects
team.o to be the combined object.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240401031004.1159713-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 099ecf59f0 ("net: annotate lockless accesses to
sk->sk_max_ack_backlog") decided to handle the sk_max_ack_backlog
locklessly, there is one more function mostly called in TCP/DCCP
cases. So this patch completes it:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240331090521.71965-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UTILITY_NAME_LENGTH is 16. So better use the former when defining the
'utility_name' array. This makes the intent clearer when it is used around
line 260.
While at it, declare variable in reverse xmas tree style.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/8c1160501f69b64bb2d45ce9f26f746eec80ac77.1711787352.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask
variable on stack is not recommended since it can cause potential stack
overflow.
Instead, kernel code should always use *cpumask_var API(s) to allocate
cpumask var in config-neutral way, leaving allocation strategy to
CONFIG_CPUMASK_OFFSTACK.
Use *cpumask_var API(s) to address it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240331053441.1276826-3-dawei.li@shingroup.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask
variable on stack is not recommended since it can cause potential stack
overflow.
Instead, kernel code should always use *cpumask_var API(s) to allocate
cpumask var in config-neutral way, leaving allocation strategy to
CONFIG_CPUMASK_OFFSTACK.
Use *cpumask_var API(s) to address it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240331053441.1276826-2-dawei.li@shingroup.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core in spi_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240330211023.100924-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core in spi_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240330211023.100924-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bindings for Renesas Ethernet TSN was just merged in v6.9 and the
design for the bindings followed that of other Renesas Ethernet drivers
and thus did not force a child-node for the MDIO bus. As there
are no upstream drivers or users of this binding yet take the
opportunity to correct this and force the usage of a child-node for the
MDIO bus.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240330131228.1541227-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin says:
====================
page_pool: allow direct bulk recycling
Previously, there was no reliable way to check whether it's safe to use
direct PP cache. The drivers were passing @allow_direct to the PP
recycling functions and that was it. Bulk recycling is used by
xdp_return_frame_bulk() on .ndo_xdp_xmit() frames completion where
the page origin is unknown, thus the direct recycling has never been
tried.
Now that we have at least 2 ways of checking if we're allowed to perform
direct recycling -- pool->p.napi (Jakub) and pool->cpuid (Lorenzo), we
can use them when doing bulk recycling as well. Just move that logic
from the skb core to the PP core and call it before
__page_pool_put_page() every time @allow_direct is false.
Under high .ndo_xdp_xmit() traffic load, the win is 2-3% Pps assuming
the sending driver uses xdp_return_frame_bulk() on Tx completion.
====================
Link: https://lore.kernel.org/r/20240329165507.3240110-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the checks for direct recycling possibility live inside the
Page Pool core, reuse them when performing bulk recycling.
page_pool_put_page_bulk() can be called from process context as well,
page_pool_napi_local() takes care of this at the very beginning.
Under high .ndo_xdp_xmit() traffic load, the win is 2-3% Pps assuming
the sending driver uses xdp_return_frame_bulk() on Tx completion.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240329165507.3240110-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
