For RSCN of type "Area, Domain, or Fabric", which indicate a portion or
entire fabric was disturbed, current driver does not set the scan_need flag
to indicate a session was affected by the disturbance. This in turn can
lead to I/O timeout and delay of relogin. Hence initiate relogin in the
event of fabric disturbance.
Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com
Fixes: 1560bafdff ("scsi: qla2xxx: Use complete switch scan for RSCN events")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'sli4->ext[i].use_map' is a bitmap. Use 'bitmap_zalloc()' to simplify code,
improve the semantic and avoid some open-coded arithmetic in allocator
arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Link: https://lore.kernel.org/r/2a0a83949fb896a0a236dcca94dfdc8486d489f5.1635104793.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace two cpu_to_le32() calls by a single cpu_to_le64() call.
Additionally, issue a warning if the length of an scatter gather list
element exceeds what is allowed by the UFSHCI specification.
Link: https://lore.kernel.org/r/20211020214024.2007615-11-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Casting an int explicitly to u16 when passed as an argument to a function
is not necessary.
Since prd_table and ucd_prdt_ptr both have type struct ufshcd_sg_entry *,
remove the casts from assignments of these two to each other.
This patch does not change any functionality.
Link: https://lore.kernel.org/r/20211020214024.2007615-9-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it easier to test the impact of the UFS error handler on software that
submits SCSI commands to the UFS driver.
Link: https://lore.kernel.org/r/20211020214024.2007615-8-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce an array for debugfs attributes to make it easier to add new
debugfs attributes. Change the value of the inode.i_private pointer for
debugfs attributes from a pointer to the HBA data structure to a pointer to
the attribute description for the stats attribute. Store the HBA pointer in
the private data of the parent inode instead.
Link: https://lore.kernel.org/r/20211020214024.2007615-7-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it possible to call ufshcd_schedule_eh_work() from other source files
than ufshcd.c. Additionally, convert a source code comment into a
lockdep_assert_held() call.
Link: https://lore.kernel.org/r/20211020214024.2007615-6-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kernel logs are hard to comprehend without information about what the UFS
error handler is doing. Hence this patch that logs information about error
handler activity.
Link: https://lore.kernel.org/r/20211020214024.2007615-5-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce an enumeration type for the overall command status to allow the
compiler to perform more static type checking.
Link: https://lore.kernel.org/r/20211020214024.2007615-4-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make the descriptions above data structures that come from the UFS
specification match the terminology from that specification. This makes it
easier to find these data structures while reading the UFS specification.
Link: https://lore.kernel.org/r/20211020214024.2007615-3-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 73dc3c4ac7 ("scsi: ufs: Retry aborted SCSI commands instead of
completing these successfully") is not necessary. If a SCSI command is
aborted successfully the UFS controller has not modified the command status
and the command status still has the value assigned by
ufshcd_prepare_req_desc_hdr(), namely OCS_INVALID_COMMAND_STATUS. The
function ufshcd_transfer_rsp_status() requeues commands that have an
invalid command status. Hence revert commit 73dc3c4ac7.
Link: https://lore.kernel.org/r/20211020214024.2007615-2-bvanassche@acm.org
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently TMF commands are removed from de_device.dev_tmf_list at the very
end of se_cmd lifecycle. However, se_lun unlinks from se_cmd upon a command
status (response) being queued in transport layer. This means that LUN and
backend device can be deleted in the meantime and a panic will occur:
target_tmr_work()
cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire
transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun
- // - // - // -
<<<--- lun remove
<<<--- core backend device remove
- // - // - // -
qlt_handle_abts_completion()
tfo->free_mcmd()
transport_generic_free_cmd()
target_put_sess_cmd()
core_tmr_release_req() {
if (dev) { // backend device, can not be null
spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH
Call Trace:
NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0
LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod]
Call Trace:
(unreliable)
0x0
target_put_sess_cmd+0x2a0/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx]
process_one_work+0x2c4/0x5c0
worker_thread+0x88/0x690
For the iSCSI protocol this is easily reproduced:
- Send some SCSI sommand
- Send Abort of that command over iSCSI
- Remove LUN on target
- Send next iSCSI command to acknowledge the Abort_Response
- Target panics
There is no need to keep the command in tmr_list until response completion,
so move the removal from tmr_list from the response completion to the
response queueing when the LUN is unlinked. Move the removal from state
list too as it is a subject to the same race condition.
Link: https://lore.kernel.org/r/20211018135753.15297-1-d.bogdanov@yadro.com
Fixes: c66ac9db8d ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 14.0.0.3.
Link: https://lore.kernel.org/r/20211020211417.88754-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A link bounce to a slow fabric may observe FDISC response delays lasting
longer than devloss tmo. Current logic decrements the final fabric node
kref during a devloss tmo event. This results in a NULL ptr dereference
crash if the FDISC completes for that fabric node after devloss tmo.
Fix by adding the NLP_IN_RECOV_POST_DEV_LOSS flag, which is set when
devloss tmo triggers and we've noticed that fabric node recovery has
already started or finished in between the time lpfc_dev_loss_tmo_callbk
queues lpfc_dev_loss_tmo_handler. If fabric node recovery succeeds, then
the driver reverses the devloss tmo marked kref put with a kref get. If
fabric node recovery fails, then the final kref put relies on the ELS
timing out or the REG_LOGIN cmpl routine.
Link: https://lore.kernel.org/r/20211020211417.88754-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an FC link down transition while PLOGIs are outstanding to fabric well
known addresses, outstanding ABTS requests may result in a NULL pointer
dereference. Driver unload requests may hang with repeated "2878" log
messages.
The Link down processing results in ABTS requests for outstanding ELS
requests. The Abort WQEs are sent for the ELSs before the driver had set
the link state to down. Thus the driver is sending the Abort with the
expectation that an ABTS will be sent on the wire. The Abort request is
stalled waiting for the link to come up. In some conditions the driver may
auto-complete the ELSs thus if the link does come up, the Abort completions
may reference an invalid structure.
Fix by ensuring that Abort set the flag to avoid link traffic if issued due
to conditions where the link failed.
Link: https://lore.kernel.org/r/20211020211417.88754-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A remote nport can stop responding to PLOGI beyond the ELS I/O timeout
under some fault conditions. When this happens, the non-response triggers
a dev_loss_tmo event from the transport which causes the driver to abort
the PLOGI and stop any retries. This was due to a policy in the ELS
completion handler whenever an ELS was terminated due to driver request.
Revise the ELS completion path to detect PLOGIs that were aborted and
allow retries.
Link: https://lore.kernel.org/r/20211020211417.88754-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An error is detected with the following report when unloading the driver:
"KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b"
The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the
flag is not cleared upon completion of the login.
This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set
to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used
as an rpi_ids array index.
Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in
lpfc_mbx_cmpl_fc_reg_login().
Link: https://lore.kernel.org/r/20211020211417.88754-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Applications determine loop support in part by querying the 'pls' sysfs
node. Reporting of 'pls' (Private Loop Support) is derived from the
descriptor returned by the COMMON_GET_SLI4_PARAMETERS mailbox command,
which is issued during initialization or after a reset.
The value of this field may change if there is a dynamic SFP change. The
driver currently will not pick up the change as there was no reset
scenario.
Rework to commonize the sending of the COMMON_GET_SLI4_PARAMETERS
command. Add the calling of the routine after receipt of an async event
indicating an SFP change.
Link: https://lore.kernel.org/r/20211020211417.88754-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A prior patch introduced HBA_NEEDS_CFG_PORT flag logic, but in
lpfc_sli_brdrestart_s3() code path, right after HBA_NEEDS_CFG_PORT is set,
the phba->hba_flag is cleared in lpfc_sli_brdreset().
Fix by calling lpfc_sli_chipset_init() to wait for successful restart of
the HBA in lpfc_host_reset_handler() after lpfc_sli_brdrestart().
lpfc_sli_chipset_init() sets the HBA_NEEDS_CFG_PORT flag so that the
lpfc_sli_hba_setup() routine from lpfc_online() will execute
lpfc_sli_config_port() initialization step when the brdrestart is
successful.
Link: https://lore.kernel.org/r/20211020211417.88754-3-jsmart2021@gmail.com
Fixes: d2f2547efd ("scsi: lpfc: Fix auto sli_mode and its effect on CONFIG_PORT for SLI3")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In cases when lpfc_enable_pci_dev() fails, lpfc_printf_log() with
LOG_TRACE_EVENT set will call lpfc_dmp_dbg() which uses the
phba->port_list_lock.
However, phba->port_list_lock does not get initialized until
lpfc_setup_driver_resource_phase1(). Thus, any initialization routine with
LOG_TRACE_EVENT log message prior to lpfc_setup_driver_resource_phase1()
will crash.
Revert LOG_TRACE_EVENT back to LOG_INIT for all log messages in routines
prior to lpfc_setup_driver_resource_phase1().
Link: https://lore.kernel.org/r/20211020211417.88754-2-jsmart2021@gmail.com
CC: Zheyu Ma <zheyuma97@gmail.com>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sched_clock() is not meant to be used in portable driver code, and assuming
a particular clock frequency is not how this is meant to be used. It also
causes a build failure because of a missing header inclusion:
drivers/scsi/ufs/ufs-mediatek.c:321:12: error: implicit declaration of function 'sched_clock' [-Werror,-Wimplicit-function-declaration]
timeout = sched_clock() + retry_ms * 1000000UL;
A better interface to use here ktime_get_mono_fast_ns(), which works mostly
like ktime_get() but is safe to use inside of a suspend callback.
Link: https://lore.kernel.org/r/20211018132022.2281589-1-arnd@kernel.org
Fixes: 9561f58442 ("scsi: ufs: mediatek: Support vops pre suspend to disable auto-hibern8")
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This symbol is not used outside of mpt3sas_ctl.c, mark it static.
Fixes the following sparse warning:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3988:18: warning: symbol
'mpt3sas_dev_attrs' was not declared. Should it be static?
Link: https://lore.kernel.org/r/1634639239-2892-1-git-send-email-jiapeng.chong@linux.alibaba.com
Fixes: 1bb3ca27d2 ("scsi: mpt3sas: Switch to attribute groups")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the memcpy_{from,to}_bvec() helpers instead of open coding them.
Link: https://lore.kernel.org/r/20211018060802.1815982-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We never checked for errors on add_disk() as this function returned
void. Now that this is fixed, use the shiny new error handling.
Just put the cdrom kref and have the unwinding be done by
sr_kref_release().
Link: https://lore.kernel.org/r/20211015233028.2167651-3-mcgrof@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We never checked for errors on add_disk() as this function returned
void. Now that this is fixed, use the shiny new error handling.
As with the error handling for device_add() we follow the same logic and
just put the device so that cleanup is done via the scsi_disk_release().
Link: https://lore.kernel.org/r/20211015233028.2167651-2-mcgrof@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When userspace changes the LUN's ALUA group, it will set the LUN's group to
NULL then to the new group. Before the new group is set,
target_alua_state_check() will return 0 and allow the I/O to execute. This
has us skip the NULL stage, and just swap in the new group.
Link: https://lore.kernel.org/r/20210930020422.92578-6-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We are only holding the lun_tg_pt_gp_lock in target_alua_state_check() to
make sure tg_pt_gp is not freed from under us while we copy the state,
delay, ID values. We can instead use RCU here to access the tg_pt_gp.
With this patch IOPs can increase up to 10% for jobs like:
fio --filename=/dev/sdX --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64 --numjobs=N
when there are multiple sessions (running that fio command to each /dev/sdX
or using multipath and there are over 8 paths), or more than 8 queues for
the loop or vhost with multiple threads case and numjobs > 8.
Link: https://lore.kernel.org/r/20210930020422.92578-5-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.
The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.
It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.
Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following bugs:
1. If there are multiple ordered cmds queued and multiple simple cmds
completing, target_restart_delayed_cmds() could be called on different
CPUs and each instance could start a ordered cmd. They could then run in
different orders than they were queued.
2. target_restart_delayed_cmds() and target_handle_task_attr() can race
where:
1. target_handle_task_attr() has passed the simple_cmds == 0 check.
2. transport_complete_task_attr() then decrements simple_cmds to 0.
3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
it does not see any cmds on the delayed_cmd_list.
4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.
The cmd will then end up timing out.
3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
them out of order, because target_handle_task_attr() will hit that
simple_cmds check first and return false for all ordered cmds sent.
4. We run target_restart_delayed_cmds() after every cmd completion, so if
there is more than 1 simple cmd running, we start executing ordered cmds
after that first cmd instead of waiting for all of them to complete.
5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
cmds have completed, and not just simple.
6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
for every cmd completion when ordered cmds are almost never used. Just
replacing that lock with an atomic increases IOPs by up to 10% when
completions are spread over multiple CPUs and there are multiple
sessions/ mqs/thread accessing the same device.
This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.
Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We can race where target_handle_task_attr() has put the cmd on the
delayed_cmd_list. Then target_restart_delayed_cmds() has removed it and set
CMD_T_SENT, but then target_execute_cmd() now clears that bit.
This patch moves the clearing to before we've put the cmd on the list.
Link: https://lore.kernel.org/r/20210930020422.92578-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the location of delay for ref-clk gating and ungating in
ufs_mtk_setup_ref_clk().
Link: https://lore.kernel.org/r/20211016005802.7729-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce default delay time for gating or ungating reference clock instead
of ambiguous magic numbers.
The defined value is suitable for all current MediaTek UFS platforms.
Link: https://lore.kernel.org/r/20211016005802.7729-2-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tcmu populates the data area (used for communication with userspace) with
pages that are allocated by calling alloc_page(GFP_NOIO). Therefore
previous content of the allocated pages is exposed to user space. Avoid
this by adding __GFP_ZERO flag.
Zeroing the pages does (nearly) not affect tcmu throughput, because
allocated pages are re-used for the data transfers of later SCSI cmds.
Link: https://lore.kernel.org/r/20211013171606.25197-1-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current value of max DataSegmentLength is 8K. T5/T6 adapters support
DataSegmentLength upto 16K. Increase max DataSegmentLength.
Link: https://lore.kernel.org/r/1634135087-4996-1-git-send-email-varun@chelsio.com
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following issue was observed running syzkaller:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815
CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe4/0x14a lib/dump_stack.c:118
print_address_description+0x73/0x280 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:352 [inline]
kasan_report+0x272/0x370 mm/kasan/report.c:410
memcpy+0x1f/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:377 [inline]
sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
__blk_run_queue_uncond block/blk-core.c:464 [inline]
__blk_run_queue+0x1a4/0x380 block/blk-core.c:484
blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
sg_write+0x64/0xa0 drivers/scsi/sg.c:622
__vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
vfs_write+0x184/0x4c0 fs/read_write.c:549
ksys_write+0x107/0x240 fs/read_write.c:599
do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.
Switch n, alen, and rlen to u32.
Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable retval is being initialized with a value that is never read,
it is being updated immediately afterwards. The assignment is redundant and
can be removed.
Link: https://lore.kernel.org/r/20211013182834.137410-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
'netdev->priv_flags & IFF_BONDING && netdev->flags & IFF_MASTER' is defined
as netif_is_bond_master() in netdevice.h. Replace it to clean up code.
Link: https://lore.kernel.org/r/20211015142006.540773-1-shjy180909@gmail.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: MichelleJin <shjy180909@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During driver probe we allocate a dma region for our event pool.
Currently, zero is passed for the gfp_flags parameter. Driver probe
callbacks are run in process context and we hold no locks so we can sleep
here if necessary.
Fix by passing GFP_KERNEL explicitly to dma_alloc_coherent().
Link: https://lore.kernel.org/r/1547089149-20577-1-git-send-email-tyreld@linux.vnet.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I intended to move from snprintf() to scnprintf() in the previous patch but
I messed up and did not do that. The result of my bug is that it this
function could trigger a WARN() if the buffer is too large.
Link: https://lore.kernel.org/r/20211013083005.GA8592@kili
Fixes: 76a4f7cc59 ("scsi: mpi3mr: Clean up mpi3mr_print_ioc_info()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For SD cardreaders it is extremely common not to have a cache.
Consequently, the following messages do not point to a real error one could
try to fix but rather describe how the disk works:
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
Print these messages as warnings instead of errors.
Link: https://lore.kernel.org/r/20211013075050.3870354-1-martin.kepplinger@puri.sm
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All SCSI drivers have been converted to use shost_groups and sdev_groups
instead of shost_attrs or sdev_attrs. Hence remove shost_attrs and
sdev_attrs. Additionally, remove the 'lld_attr_group' members and also
the scsi_convert_dev_attrs() function.
Link: https://lore.kernel.org/r/20211012233558.4066756-47-bvanassche@acm.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-46-bvanassche@acm.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
