Fix below checkpatch insisted error & warnings:
ERROR: Macros with complex values should be enclosed in parentheses
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
WARNING: Block comments use a trailing */ on a separate line
WARNING: Missing a blank line after declarations
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sq.is_enabled is a byte so there is no need to endian swap it.
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework logic or use do_div() to avoid problems on 32 bit.
v2: add a missing case for XCP macro
v3: fix out of bounds array access
v4: fix xcp handling harder
Acked-by: Guchun Chen <guchun.chen@amd.com> (v1)
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> (v3)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Query and reset sq timeout status.
v2: change instance from 0 to xcc_id for register access.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add GFX RAS error count reset function.
v2: remove xcp operation.
only select_se_sh when instance number is more than 1.
v3: add check for se_num before select_se_sh.
change instance from 0 to xcc_id for register access.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare for the query of GFX RAS ce/ue count.
v2: remove xcp operation.
only select_se_sh when instance number is more than 1.
v3: add more CE/UE registsers to query list.
add check for se_num before select_se_sh.
change instance from 0 to xcc_id for register access.
v4: move gfx memory id definitions to gfx_v9_4_3.
v5: create a dedicated patch for adding error count query function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add common GFX RAS definitions.
v2: remove instance from amdgpu_gfx_ras_reg_entry,
amdgpu_ras_err_status_reg_entry has already defined it.
v3: remove memory id definitions from amdgpu_gfx.h, they are
related to IP version.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reset GFX RAS status registers.
v2: fix typo in title.
remove xcp operation.
v3: change instance from 0 to xcc_id for register access.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The common function can help reduce redundant code.
v2: remove xcp operation, only need to do RAS operations for all
instances.
v3: remove check for GFX RAS support, will be checked in higher level.
add amdgpu prefix for the function name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all the asic needs xcp. ensure check xcp availabity
before accessing its member.
v2: add missing change in kfd_topology.c
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mask is only needed to be set when RAS block instance number is
more than 1 and invalid bits should be also masked out.
We only check valid bits for GFX and SDMA block for now, and will
add check for other RAS blocks in the future.
v2: move the check under injection operation since the mask is only
used by RAS error inject.
v3: add valid bits handling for SDMA.
v4: print message if the mask is adjusted.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No special requirement in RAS injection for the two versions, switch to
use default injection interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So GFX RAS injection could use default function if it doesn't define its
own injection interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can specify injected instances by the mask. For backward
compatibility, the mask value is incorporated into sub block index
without interface change of RAS TA.
User uses logical mask and driver should convert it to physical value
before sending it to RAS TA.
v2: update parameter name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert instance mask for the convenience of RAS TA.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables IH CAM on GFX9.4.3 ASIC.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current calculation only works for NPS4/QPX mode, correct it for
NPS4/CPX mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename smv_migrate_init to a better name kgd2kfd_init_zone_device
because it setup zone devive pgmap for page migration and keep it in
kfd_migrate.c to access static functions svm_migrate_pgmap_ops. Call it
only once in amdgpu_device_ip_init after adev ip blocks are initialized,
but before amdgpu_amdkfd_device_init initialize kfd nodes which enable
SVM support based on pgmap.
svm_range_set_max_pages is called by kgd2kfd_device_init everytime after
switching compute partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During XCP init, unlike the primary device, there is no amdgpu_device
attached to each XCP's drm_device
In case that user trying to open/close the primary node of XCP drm_device
this rerouting is to solve the NULL pointer issue causing by referring
to any member of the amdgpu_device
BUG: unable to handle page fault for address: 0000000000020c80
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Oops: 0002 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
lock_timer_base+0x6b/0x90
try_to_del_timer_sync+0x2b/0x80
del_timer_sync+0x29/0x40
flush_delayed_work+0x1c/0x50
amdgpu_driver_open_kms+0x2c/0x280 [amdgpu]
drm_file_alloc+0x1b3/0x260 [drm]
drm_open+0xaa/0x280 [drm]
drm_stub_open+0xa2/0x120 [drm]
chrdev_open+0xa6/0x1c0
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes memory reporting on the GFX 9.4.3 APU and dGPU
by reporting available memory on a per partition basis. If its an
APU, available and used memory calculations take into account
system and TTM memory.
v2: squash in fix ("drm/amdkfd: Fix array out of bound warning")
squash in fix ("drm/amdgpu: Update memory reporting for GFX9.4.3")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to track memory usage on a per partition basis. To do
that, store the local memory information in KFD node instead
of kfd device.
v2: squash in fix ("amdkfd: Use mem_id to access mem_partition info")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Find xcp_id from amdgpu_fpriv, use it for amdgpu_gem_object_create.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_ioctl_get_dmabuf use the amdgpu bo xcp_id to get the gpu_id of the
KFD node from the exported dmabuf_adev, and then create kfd bo on the
correct adev and KFD node when importing the amdgpu bo to KFD.
Remove function kfd_device_by_adev, it is not needed as it is the same
result as dmabuf_adev->kfd.dev->nodes[0]->id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For memory accounting per compute partition and export drm amdgpu bo and
then import to KFD, we need the xcp id to account the memory usage or
find the KFD node of the original amdgpu bo to create the KFD bo on the
correct adev KFD node.
Set xcp_id_plus1 of amdgpu_bo_param to create bo and store xcp_id to
amddgpu bo. Add helper macro to get the mem_id from adev and xcp_id.
v2: squash in fix ("drm/amdgpu: Fix BO creation failure on GFX 9.4.3 dGPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TTM place lpfn is exclusive used as end (start + size) in drm and buddy
allocator, adev->gmc memory partition range lpfn is inclusive (start +
size - 1), should plus 1 to set TTM place lpfn.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alloc kernel mode page table bo uses the amdgpu_vm->mem_id + 1 as bp
mem_id_plus1 parameter. For APU mode, select the correct TTM pool to
alloc page from the corresponding memory partition, this will be the
closest NUMA node. For dGPU mode, select the correct address range for
vram manager.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use MTYPE RW/MTYPE_CC for mapping system memory or VRAM to KFD node
within the same memory partition, use MTYPE_NC for mapping on KFD node
from the far memory partition of the same socket or from another socket
on same XGMI hive.
On NPS4 or 4P system, MTYPE will be overridden per page depending on
the memory NUMA node id and vm->mem_id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dGPU mode uses VRAM manager to validate bo, amdgpu bo placement use the
mem_id to get the allocation range first, last page frame number
from xcp manager, pass to drm buddy allocator as the allowed range.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For dGPU mode VRAM allocation, create amdgpu_bo from amdgpu_vm->mem_id,
to alloc from the correct memory range.
For APU mode VRAM allocation, set alloc domain to GTT, and set
bp->mem_id_plus1 from amdgpu_vm->mem_id + 1 to create amdgpu_bo, to
allocate system memory from correct NUMA node.
For GTT allocation, use mem_id -1 to allocate system memory from any
NUMA nodes.
Remove amdgpu_ttm_tt_set_mem_pool, to avoid the confusion that memory
maybe allocated from different mem_id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mem_id_plus1 parameter to amdgpu_gem_object_create and pass it to
amdgpu_bo_create. For dGPU mode allocation, mem_id is used by VRAM
manager to get the memory partition fpfn, lpfn from xcp manager. For APU
native mode allocation, mem_id is used to get NUMA node id from xcp
manager, then pass to TTM as numa pool id to alloc memory from the
specific NUMA node. mem_id -1 means for entire VRAM or any NUMA nodes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Show KFD node memory partition id and size, add helper function
KFD_XCP_MEMORY_SIZE to get kfd node memory size, will be used
later to support memory accounting per partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If xcp_mgr is initialized, add mem_id to amdgpu_vm structure to store
memory partition number when creating amdgpu_vm for the xcp. The xcp
number is decided when opening the render device, for example
/dev/dri/renderD129 is xcp_id 0, /dev/dri/renderD130 is xcp_id 1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used by KFD to check memory limit accounting.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Run partition schedule if it is supported during ctx init entity.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep amdgpu_ctx_mgr in ctx structure to track fpriv.
v2: add missing fpriv declaration lost in rebase
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add partition scheduler list update in late init
and xcp partition mode switch.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update header to support partition scheduling.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep track partition ID in ring.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Find partition ID when open device from render device minor.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-and-tested-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support partition drm devices on GC_HWIP IP_VERSION(9, 4, 3).
This is a temporary solution and will be superceded.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-and-tested-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Selects the MTYPE to be used for local memory,
(0 = MTYPE_CC (default), 1 = MTYPE_NC, 2 = MTYPE_RW)
v2: squash in build fix (Alex)
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFXv9.4.3 NUMA APUs, system memory locality must be determined per
page to choose the correct MTYPE. This patch adds a GMC callback that
can provide this per-page override and implements it for native mode.
Carve-out mode is not yet supported and will use the safe default
(remote) MTYPE for system memory.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat system memory on NUMA systems as remote by default. Overriding with
a more efficient MTYPE per page will be implemented in the next patch.
No need for a special case for APP APUs. System memory is handled the same
for carve-out and native mode. And VRAM doesn't exist in native mode.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default, set use_mtype_cc_wa to 1 to set PTE coherence flag MTYPE_CC
instead of MTYPE_RW by default. This is required for the time being to
mitigate a bug causing XCCs to hit stale data due to TCC marking fully
dirty lines as exclusive.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
