Invalidate TLBs via a legacy flush request (flush_type=0) prior to the
heavyweight flush requests (flush_type=2) in gmc_v9_0.c. This is
temporarily required to mitigate a bug causing CPC UTCL1 to return stale
translations after invalidation requests in address range mode.
v2: squash in long term fix "drm/amdgpu: disable extra gfx943 legacy flush on rev1+"
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX 9.4.3 APP APU VRAM is allocated in GTT domain. While freeing
memory check for GTT domain instead of VRAM if it is APP APU
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CPX compute mode is valid mode for NPS4 memory partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VRAM pgmap resource is allocated every time when switching compute
partitions because kfd_dev is re-initialized by post_partition_switch,
As a result, it causes memory region resource leaking and system
memory usage accounting unbalanced.
pgmap resource should be allocated and registered only once when loading
driver and freed when unloading driver, move it from kfd_dev to
amdgpu_kfd_dev.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC-PMFW handshake happens periodically when GFXCLK DPM is enabled and
halting RLC may cause unexpected results. Avoid halting RLC from driver
side.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Access registers with the right xcc id. Also, remove the unused logic as
PG is not used in GFX v9.4.3
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turns out STATUS_VALID_FLAG needs to be checked
ahead of any other fields. ADDRESS_VALID_FLAG and
ERR_INFO_VALID_FLAG only manages ADDRESS and ERR_INFO
field respectively. driver should continue poll
ERR CNT field even ERR_INFO_VALD_FLAG is not set.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add reset_ras_error_count callback for jpeg v4_0_3.
It will be used to reset jpeg ras error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add query_ras_error_count callback for jpeg v4_0_3.
It will be used to query and log jpeg error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN RAS enablement sequence needs to be added in
DPG HW init sequence.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add reset_ras_error_count callback for vcn v4_0_3.
It will be used to reset vcn ras error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add query_ras_error_count callback for vcn v4_0_3.
It will be used to query and log vcn error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV on some parts, the host driver does not post VBIOS. So the guest
cannot get bios information. Therefore, adev->virt.fw_reserve.p_pf2vf
and adev->mode_info.atom_context are NULL.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV, the memory partitions are set on host drover. Each VF only
has one memory partition. We need set the memory partitions to 1 on
guest driver for SRIOV.
V2: sqaush in fix ("drm/amdgpu: Fix memory range info of GC 9.4.3 VFs")
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Acked-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MC_VM_FB_OFFSET is PF only register. It cannot be read on VF.
So, the driver should not use MC_VM_FB_OFFSET address to set the
address of dev->gmc.aper_base.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add PSP supporting PSP 13.0.6 SRIOV ucode init.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return error if an invalid compute partition mode is requested.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep a helper function to get description of compute partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When aperture size is zero, there is no mapping done.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFXIP 9.4.3, we dont need to rely on xGMI hive info to determine P2P
access.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For native mode, after amdgpu_bo is created on CPU domain, then call
amdgpu_ttm_tt_set_mem_pool to select the TTM pool using bo->mem_id.
ttm_bo_validate will allocate the memory to the correct memory partition
before mapping to GPUs.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For native mode only, create TTM pool for each memory partition to store
the NUMA node id, then the TTM pool will be selected using memory
partition id to allocate memory from the correct partition.
Acked-by: Christian König <christian.koenig@amd.com>
(rajneesh: changed need_swiotlb and need_dma32 to false for pool init)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When auto mode is specified, driver will choose the right compute
partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the memory ranges available to the device also for deciding a
valid partition mode. Only select combinations are valid for a
particular mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After partition switch, fill all relevant xcp information before kfd
starts initialization.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement callbacks to fill memory node information in aquavanjaram.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callback in xcp interface to fill xcp memory id information. Memory
id is used to identify the range/partition of an XCP from the available
memory partitions in device. Also, fill the id information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC 9.4.3 ASICS may have memory split into multiple partitions.Initialize
the memory partition information for each range. The information may be
in the form of a numa node id or a range of pages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some ASICs have the device memory divided into multiple partitions. The
parititions could be denoted by a numa node or by a range of pages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interface to get numa information of ACPI XCC object. The interface
uses logical id to identify an XCC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a struct to store additional numa node information including size
and base address. Add numa_info pointer to xcc object to point to the
relevant structure based on its proximity domain.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expand the interface to get supported memory partition modes also along
with the current memory partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GMC block handles memory related information, it makes more sense to
keep memory partition functions in gmc block.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add utility functions to get details of xcp and iterate through
available xcps.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the generic term fw_reserved_memory for FW reserve region. This
region may also hold discovery TMR in addition to other reserve
regions. This region size could be larger than discovery tmr size, hence
don't change the discovery tmr size based on this.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For IH ring buffer and read/write pointers, use GPU VA space rather than
Guest PA on APU configs. Access through Guest PA doesn't work when IOMMU
is enabled. It is also beneficial in NUMA configs as it allocates from
the closest numa pool in a numa enabled system.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify so as to use the same sequence to assign logical to physical
ids for all IPs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN DPG buffer object is intialized to NULL. If allotted, buffer object
deletion logic will take care of NULL check and delete accordingly. This
is useful for cases where indirect sram flag could be manipulated later
after buffer allocation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 0xDEADBEEF standard anti-hang value. Use it may cause
fake pass.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make sure VCN DB_CTRL is delivered before doorbell write.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need parentheses for the micro parameters.
Signed-off-by: Sonny Jiang <sonjiang@amd.com>
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The jpeg_v4_0_3 jpeg_pitch register uses UVD_JRBC_SCRATCH0. It needs to
move WREG() to after jpeg_start.
Switch to a posted register write when doing the ring test to make sure
the register write lands before we test the result.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use physical AID index for VCN/JPEG ring name instead of
logical AID index.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use dummy register 0xDEADBEEF selects AID for PSP VCN_RAM ucode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use VCN instance mask to check if an instance is harvested or not.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Address VCN/JPEG instances using logical ids. Whenever register access is
required, get the physical instance using GET_INST.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mappings for logical to physical id for VCN/JPEG 4.0.3
v2: make local function static (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
