intel_psr_pre_plane_update() operates on a per-crtc level, whereas
intel_psr_post_plane_update() operates on the whole atomic commit,
for no real reason that I can see. Adjust intel_psr_post_plane_update()
to match the intel_psr_pre_plane_update() approach.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004155607.7719-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Recompute the state of all CRTCs on an FDI link during a modeset that
may be affected by the modeset of other CRTCs on the same link. This
ensures that each CRTC on the link maximizes its BW use (after another
CRTC is disabled).
In practice this means recomputing pipe B's config on IVB if pipe C gets
disabled.
v2:
- Add the change recomputing affected CRTC states in a separate patch.
(Ville)
v3: (Ville)
- Constify old and new crtc states.
- Check for fused off pipe C.
- Fix new vs. old crtc state mixup.
- Drop check for pipe C's enabled state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-12-imre.deak@intel.com
At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI
lanes. Make the BW sharing more dynamic by trying to reduce pipe B's
link bpp in this case, until pipe B uses only up to 2 FDI lanes.
For this instead of the encoder compute config retry loop - which
reduced link bpp only for the encoder's pipe - reduce the maximum link
bpp for pipe B/C as required after all CRTC states are computed and
recompute the CRTC states with the new bpp limit.
Atm, all FDI encoder's compute config function returns an error if a BW
constrain prevents increasing the pipe bpp value. The corresponding
crtc_state->bw_constrained check can be replaced with checking
crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an
exception where this case is only handled in the outer config retry
loop, failing the modeset with a WARN, add a FIXME comment to handle
this in the encoder code similarly to other encoders.
v2:
- Don't assume that a CRTC is already in the atomic state, while
reducing its link bpp.
- Add DocBook description to intel_fdi_atomic_check_link().
v3:
- Enable BW management for FDI links in a separate patch. (Ville)
v4: (Ville)
- Fail the SDVO encoder config computation if it doesn't support the
link bpp limit.
- Add TODO: comments about checking link_bpp_x16 instead of
bw_constrained.
v5:
- Replace link bpp limit check with a FIXME: comment in
intel_sdvo_compute_config(). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Amended commit message wrt. changes in v5]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-11-imre.deak@intel.com
At the moment a modeset fails if the config computation of a pipe can't
fit its required BW to the available link BW even though the limitation
may be resolved by reducing the BW requirement of other pipes.
To improve the above this patch adds helper functions checking the
overall BW limits after all CRTC states have been computed. If the check
fails the maximum link bpp for a selected pipe will be reduced and all
the CRTC states will be recomputed until either the overall BW limit
check passes, or further bpp reduction is not possible (because all
pipes/encoders sharing the link BW reached their minimum link bpp).
Atm, the MST encoder allocates twice the required BW for YUV420 format
streams. A follow-up patchset will fix that, add a code comment about
this.
This change prepares for upcoming patches enabling the above BW
management on FDI and MST links.
v2:
- Rename intel_crtc_state::max_link_bpp to max_link_bpp_x16 and
intel_link_bw_limits::max_bpp to max_bpp_x16. (Jani)
v3:
- Add the helper functions in a separate patch. (Ville)
- Add the functions to intel_link_bw.c instead of intel_atomic.c (Ville)
- Return -ENOSPC instead of -EINVAL to userspace in case of a link BW
limit failure.
v4:
- Make intel_atomic_check_config() static.
v5: (Ville)
- Rename intel_link_bw_limits::min_bpp_pipes to min_bpp_reached_pipes
and intel_link_bw_reset_pipe_limit_to_min() to
intel_link_bw_set_min_bpp_for_pipe().
- Rename pipe_bpp to link_bpp in intel_link_bw_reduce_bpp().
- Add FIXME: comment about MST encoder's YUV420 BW allocation and
tracking the link bpp limit accordingly.
v6:
- Move intel_link_bw_compute_pipe_bpp() to intel_fdi.c (Ville)
- WARN_ON(BIT(pipe) & min_bpp_reached_pipes) in
intel_link_bw_set_bpp_limit_for_pipe(). (Ville)
- Rename intel_link_bw_set_min_bpp_for_pipe() to
intel_link_bw_set_bpp_limit_for_pipe() and
intel_link_bw_limits::min_bpp_reached_pipes to
bpp_limit_reached_pipes. (Ville)
- Remove unused header includes.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-10-imre.deak@intel.com
Factor out intel_atomic_check_config() to check and compute all the CRTC
states. This will be used by a follow up patch to recompute/check the
state until required by BW limitations between CRTCs.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-9-imre.deak@intel.com
Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late() to
clarify when the function can be called (vs.
intel_modeset_pipes_in_mask_early()).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-8-imre.deak@intel.com
Add intel_modeset_pipes_in_mask_early() to modeset a provided set of
pipes, used in a follow-up patch.
As opposed to intel_modeset_all_pipes() which modesets only the active
pipes - others don't requiring programming the HW - modeset all enabled
pipes in intel_modeset_pipes_in_mask_early() which may need to recompute
their state even if they are not active (that is in the DPMS off state).
While at it add DocBook descriptions for the two exported functions.
v2:
- Add a flag controlling if active planes are force updated as well.
- Add DockBook descriptions.
v3:
- For clarity use _early/_late suffixes for the exported functions
instead of the update_active_planes parameter. (Ville)
v4:
- In intel_modeset_pipes_in_mask_early() update only the crtc
flags relevant to the early phase. (Ville)
- Rename intel_modeset_all_pipes() in a separate patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-7-imre.deak@intel.com
Loading LUTs with the DSB outside of vblank doesn't really
work due to the palette anti-collision logic. Apparently the
DSB register writes don't get stalled like CPU mmio writes
do and instead we end up corrupting the LUT entries. Disabling
the anti-collision logic would allow us to successfully load
the LUT outside of vblank, but presumably that risks the LUT
reads from the scanout (temporarily) getting corrupted data
from the LUT instead.
The anti-collision logic isn't active during vblank so that
is when we can successfully load the LUT with the DSB. That is
what we want to do anyway to avoid tearing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-13-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Implement low refresh rate (LRR) where we change the vblank
length by hand as requested, but otherwise keep the timing
generator running in non-VRR mode (ie. fixed refresh rate).
The panel itself must support VRR for this to work, and
only TGL+ has the double buffred TRANS_VTOTAL.VTOTAL that
we need to make the switch properly. The double buffer
latching happens at the start of transcoders undelayed
vblank. The other thing that we change is
TRANS_VBLANK.VBLANK_END but the hardware entirely ignores
that in DP mode. But I decided to keep writing it anyway
just to avoid more special cases in readout/state check.
v2: Document that TRANS_VBLANK.VBLANK_END is ignored by
the hardware
v3: Reconcile with VRR fastset
Adjust update_lrr flag behaviour
Make sure timings stay within VRR range
v4: Fix up update_m_n vs. update_lrr rebase fail (Manasi)
Drop DOUBLE_BUFFER_VACTIVE define as it's not needed (Manasi)
TODO: Hook LRR into the automatic DRRS downclocking stuff?
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230915103800.14218-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
We should be able to change any of the VRR parameters
during fastsets as long as we toggle VRR off at the start
and then back on at the end. The transcoder will be running
in non-VRR mode during the transition.
Co-developed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-11-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Make life less confusing by making sure VRR is disabled whenever
we do any drastic changes to the display timings, such as seamless
M/N changes.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-10-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Don't perform a seamless M/N update if the values aren't actually
changing. This avoids doing extra shenanigans during vblank evasion
needlessly.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-7-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.
I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
In order to reconcile seamless M/N updates with VRR we'll
need to defer the fastset VRR enable to happen after the
seamless M/N update (which happens during the vblank evade
critical section). So just push the VRR enable to be the last
thing during the update.
This will also affect the vblank evasion as the transcoder
will now still be running with the old VRR state during
the vblank evasion. So just grab the timings always from the
old crtc state during any non-modeset commit, and also grab
the current state of VRR from the active timings (as we disable
VRR before vblank evasion during fastsets).
This also fixes vblank evasion for seamless M/N updates as
we now properly account for the fact that the M/N update
happens after vblank evasion.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
We'll need to also look at the old crtc state in
intel_pipe_update_start() so change the calling convention to
just plumb in the full atomic state instead.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Track DP enhanced framing properly in the crtc state instead
of relying just on the cached DPCD everywhere, and hook it
up into the state check and dump.
v2: Actually set enhanced_framing in .compute_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
With the dsc config being readout and filled in crtc_state add
macros and use them to compare current and previous PPS param in
DSC.
--v2
-Remove version check [Jani]
-Remove dupe macro for dsc pipe compare and use the existing ones
[Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828054300.560559-9-suraj.kandpal@intel.com
Most of the IS_METEORLAKE checks in the display code shouldn't actually
be tied to MTL as a platform, but rather to the Xe_LPD+ display IP
(which is used in MTL, but may show up again in future platforms). In
cases where we're trying to match that specific IP, use a version check
against IP_VER(14, 0). For cases where we're just handling new behavior
introduced by this IP (but which may also be inherited by future IP as
well), use a ver >= 14 check.
The one exception here is the stolen memory workaround Wa_13010847436
(which is mislabelled as "Wa_22018444074" in the code). That's truly a
MTL-specific issue rather than being tied to any of the IP blocks, so
leaving the condition as IS_METEORLAKE is correct there.
v2:
- cdclk check should be >=, not >. (Gustavo)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-19-matthew.d.roper@intel.com
All production DG2 cards have display stepping C0 or later. We can drop
Wa_14013215631 (only applies to pre-C0) and make Wa_14010547955
unconditional (applies to everything B0 and beyond). Also drop the
now-unused IS_DG2_DISPLAY_STEP macro.
Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-9-matthew.d.roper@intel.com
Try to deal with duplicate child devices for the same DDI port
by attempting to initialize them in VBT defined order The first
on to succeed for a specific DDI port will be the one we use.
We'll also get rid of i915->display.vbt.ports[] here as any conflicts
will now be handled at encoder registration time rather than during
VBT parsing. Note that intel_bios_encoder_data_lookup() still remaims
for pre-DDI DP/HDMI ports as those don't (at least yet) use VBT
driven initialization.
TODO: DSI dual link handling is sketchy at best
v2: Leave intel_bios_encoder_port() to the encoder callback (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630155846.29931-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
DC states are disabled / re-enabled around each modeset, which may lead
to a needless off->on->off toggling of the DC_off power well. This has
some overhead as toggling DC states involves running a DMC firmware
handler and also running a periodic firmware handler while DC states are
enabled. The limit of when DC states have a benefit is at 30 FPS (using
DC3co) and below 30 FPS (using DC5/6), where the firmware can actually
disable clocks / power off power wells. Accordingly delay powering off
the DC_off powerwell (which re-enables DC states) by 17 ms at the end of
a modeset to avoid the above overhead at or above 60 FPS.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616185104.2502003-4-imre.deak@intel.com
Make HSW/BDW use port_mask for output probing as well.
To achieve that the strap checks are moved into
intel_ddi_init() itself. Or should we move them to the
runtime port_mask init instead? Maybe not since the hardware
is still there, just not connected to anything.
v2: Account for DDI-E in strap detection
Keep to the old CRT->DDI init order
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-8-ville.syrjala@linux.intel.com
Instead of listing every platform's possible DDI outputs
in intel_setup_outputs() just loop over the new port_mask
to achieve the same thing.
HSW/BDW were left as is since they still look at the straps
as well.
DSI is still a mess. For now just check for the relevant
platforms explicitly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-7-ville.syrjala@linux.intel.com
Sprinkle some asserts to catch any mishaps in the port_mask
vs. output init.
For DDI/DP/HDMI/SDVO I decided that we want to bail out for
an invalid port since those are the encoder types where
we might want consider driving the whole thing from the VBT
child device list, and bogus VBTs could be a real issue
(if for no other reason than the i915.vbt_firmware).
For DVO and HSW/BDW CRT port I just threw the assert in
there for good measure.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-5-ville.syrjala@linux.intel.com
In order to avoid flush_scheduled_work() usage, add a dedicated
workqueue in the drm_i915_private structure. In this way, we don't
need to use the system queue anymore.
This change is mostly mechanical and based on Tetsuo's original
patch[1].
v6 by Jani:
- Also create unordered_wq for mock device
Link: https://patchwork.freedesktop.org/series/114608/ [1]
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c816ebe17ef08d363981942a096a586a7658a65e.1686231190.git.jani.nikula@intel.com
MTL introduces a new way to instruct the PUnit with
power and bandwidth requirements of DE. Add the functionality
to program the registers and handle waits using interrupts.
The current wait time for timeouts is programmed for 10 msecs to
factor in the worst case scenarios. Changes made to use REG_BIT
for a register that we touched(GEN8_DE_MISC_IER _MMIO).
Wa_14016740474 is added which applies to Xe_LPD+ display
v2: checkpatch warning fixes, simplify program pmdemand part
v3: update to dbufs and pipes values to pmdemand register(stan)
Removed the macro usage in update_pmdemand_values()
v4: move the pmdemand_pre_plane_update before cdclk update
pmdemand_needs_update included cdclk params comparisons
pmdemand_state NULL check (Gustavo)
pmdemand.o in sorted order in the makefile (Jani)
update pmdemand misc irq handler loop (Gustavo)
active phys bitmask and programming correction (Gustavo)
v5: simplify pmdemand_state structure
simplify methods to find active phys and max port clock
Timeout in case of previou pmdemand task pending (Gustavo)
v6: rebasing
updates to max_ddiclk calculations (Gustavo)
updates to active_phys count method (Gustavo)
v7: use two separate loop to iterate throug old and new
crtc states to calculate the active phys (Gustavo)
v8: use uniform function names (Gustavo)
v9: For phys change iterate through connectors (Imre)
Look for change in phys for pmdemand update (Gustavo, Imre)
Some more stlying changes (Imre)
Update pmdemand state during HW readout/sanitize (Imre)
v10: Fix CI checkpatch warnings
v11: use correct pmdemand object pointer during hw readout,
simplify the check for phys need update (Gustavo)
v12: Handle possible non serialize cases (Imre)
Initialise also pmdemand params HW readout (Imre)
Update active phys mask during sanitize calls (Imre)
Check TC/encoder changes to limit connector update (Imre)
v13: Check display version before accessing pmdemand functions
v14: Move is_serialized to intel_global_state.c
simplify update params and other stlying issues (Imre)
Bspec: 66451, 64636, 64602, 64603
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v4
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com> #v11
Reviewed-by: Imre Deak <imre.deak@intel.com>
[RK: Fixed minor typo in one of the comments. s/qclck_gc/qclk_gv/]
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606201032.347449-1-vinod.govindapillai@intel.com
Prepare for re-enabling -Wunused-but-set-variable.
for_each_new_intel_crtc_in_state() requires passing in a struct
intel_crtc_state pointer, which it uses, but in a few places this leads
to warning about unused but set variables. Annotate them with
__maybe_unused.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eb041f426bc3d76ef7a0ea906f99367cbf439b1a.1685119007.git.jani.nikula@intel.com
Prepare for re-enabling -Wunused-but-set-variable.
for_each_new_intel_plane_in_state() requires passing in a struct
intel_plane_state pointer, which it uses, but in many places this leads
to warning about unused but set variables. Annotate them with
__maybe_unused.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/438ff3b257b7f85ecca5750ae8687336faee0a79.1685119007.git.jani.nikula@intel.com
VLV has a so called "wide gamut color correction" unit (WGC).
What it is is a 3x3 matrix similar to the later CHV CGM
CSC, with less precisions/range. In fact CHV also has the WGC
but using it there doesn't really make sense when you have the
superior CGM CSC around.
Hook up the necessary stuff to expose the WGC as the CTM
crtc property.
One additional crazy idea that came to mind would be to use
the WGC as an output CSC on CHV for YCbCr output. But it
would be incompatible with the legacy LUT usage. In fact
since the WGC lacks post-offsets we'd probably have to
use the legacy LUT to do that final part of the RGB->YCbCr
conversion. Sounds doable, but perhaps not worth the hassle.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413164916.4221-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Clang warns:
drivers/gpu/drm/i915/display/intel_display.c:6012:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
case I915_FORMAT_MOD_X_TILED:
^
drivers/gpu/drm/i915/display/intel_display.c:6012:3: note: insert 'break;' to avoid fall-through
case I915_FORMAT_MOD_X_TILED:
^
break;
1 error generated.
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Fixes: 937859485a ("drm/i915: Support Async Flip on Linear buffers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/202305241902.UvHtMoxa-lkp@intel.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYv68V3ewK0Qj-syQj7qX-hQr0H1MFL=QFNuDoE_J2Zu-g@mail.gmail.com/
Reported-by: Tom Rix <trix@redhat.com>
Closes: https://lore.kernel.org/all/20230523125116.1669057-1-trix@redhat.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524-intel_async_flip_check_hw-implicit-fallthrough-v1-1-83de89e376a1@kernel.org
Move the runtime info specific to display into display-specific
structures as has already been done with the constant display info.
v2:
- Rename __runtime to __runtime_defaults for more clarity on the
purpose. (Andrzej)
- Move introduction of DISPLAY_INFO() to previous patch. (Andrzej)
- Drop NO_DISPLAY macro. (Andrzej)
v3:
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-4-matthew.d.roper@intel.com
Starting from Gen12 Async Flip is supported on linear buffers.
This patch enables support for async on linear buffer.
UseCase: In Hybrid graphics, for hardware unsupported pixel formats it
will be converted to linear memory and then composed.
v2: Added use case
v3: Added FIXME for ICL indicating the restrictions
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906041806.4095575-1-arun.r.murthy@intel.com
The "fastset mismatch" debug logging has been slightly confusing,
leading people to believe some error happened. Change it to the more
informative "fastset requirement not met", and add a final message about
this leading to full modeset.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516094406.2675307-1-jani.nikula@intel.com
During HW readout/sanitization CRTCs can be disabled only if they don't
have an attached encoder (and so the encoder disable hooks don't need to
be called). An upcoming patch will need to disable CRTCs also with an
attached encoder, so add support for this.
For bigjoiner configs the encoder disabling hooks require the slave CRTC
states, so add these too to the atomic state. Since the connector atomic
state is already up-to-date when the CRTC is disabled the connector
state needs to be updated (reset) after the CRTC is disabled, make this
so. Follow the proper order of disabling first all bigjoiner slaves,
then any port synced CRTC slaves followed by the CRTC originally
requested to be disabled.
v2:
- Fix calculating the bigjoiner_masters mask in a port sync config,
(Ville)
- Keep _noatomic suffix in intel_crtc_disable_noatomic(). (Ville)
- Rebase on full CRTC state reset in this patchset, not requiring
resetting the bigjoiner state separately and (instead) resetting
the full atomic CRTC and related global state after all linked
pipes got disabled.
- Disable portsync slaves before a portsync master.
- Disable a portsync master if a linked portsync slave is disabled.
v3: (Ville)
- Use s/u32/u8 for transcoder and pipe masks.
- Use is_power_of_2() instead of hweight()==1.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-8-imre.deak@intel.com
For a bigjoiner configuration display->crtc_disable() will be called
first for the slave CRTCs and then for the master CRTC. However slave
CRTCs will be actually disabled only after the master CRTC is disabled
(from the encoder disable hooks called with the master CRTC state).
Hence the slave PIPEDMCs can be disabled only after the master CRTC is
disabled, make this so.
intel_encoders_post_pll_disable() must be called only for the master
CRTC, as for the other two encoder disable hooks. While at it fix this
up as well. This didn't cause a problem, since
intel_encoders_post_pll_disable() will call the corresponding hook only
for an encoder/connector connected to the given CRTC, however slave
CRTCs will have no associated encoder/connector.
Fixes: 3af2ff0840 ("drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-2-imre.deak@intel.com
Add i915 parameter to I915_STATE_WARN() and use device based logging.
Done using cocci + hand edited where there was no i915 local variable
ready.
v2: avoid null deref in verify_connector_state()
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
