The J721S2 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive ADAS applications and
industrial applications requiring AI at the network edge. This SoC extends
the Jacinto 7 family of SoCs with focus on lowering system costs and power
while providing interfaces, memory architecture and compute performance for
single and multi-sensor applications.
Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, three clusters of lockstep capable
dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x
floating point Vector DSP.
* 3D GPU: Automotive grade IMG BXS-4-64
* Vision Processing Accelerator (VPAC) with image signal processor and
Depth and Motion Processing Accelerator (DMPAC)
* Two CSI2.0 4L RX plus one eDP/DP, two DSI Tx, and one DPI interface.
* Two Ethernet ports with RGMII support.
* Single 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role device subsystems,
* Up to 20 MCANs, 5 McASP, eMMC and SD, OSPI/HyperBus memory controller,
QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals.
* Hardware accelerator blocks containing AES/DES/SHA/MD5 called SA2UL
management.
* Chips and Media Wave521CL H.264/H.265 encode/decode engine
See J721S2 Technical Reference Manual (SPRUJ28 – NOVEMBER 2021)
for further details: http://www.ti.com/lit/pdf/spruj28
Introduce basic support for the J721S2 SoC.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20211207080904.14324-4-a-govindraju@ti.com
Samsung J5 2015 is a MSM8916 based Smartphone. It is similar to some of the
other MSM8916 devices, especially the Samsung ones.
With this patch initial support for the following is added:
- eMMC/SD card
- Buttons
- USB (although no suiting MUIC driver currently)
- UART (untested for lack of equipment)
- WiFi/Bluetooth (WCNSS)
It is worth noting that Samsung J5 with MSM8916 exists in different
generations (e.g Samsung J5 2015 and Samsung J5 2016) which each have
different models (e.g. samsung-j5nlte, samsung-j5xnlte, etc). This patch
is only regarding the 2015 generation, but should work with all of it's
models, as far as we could test.
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Julian Ribbeck <julian.ribbeck@gmx.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211116200734.73920-1-julian.ribbeck@gmx.de
Disable mcasp nodes 0-2 because several required properties
are not present in the dtsi file as they are board specific.
These nodes can be enabled via an overlay whenever required.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20211117053806.10095-1-j-choudhary@ti.com
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
regression that LCDIF driver stops probe, because interconnect
provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG0BOsUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6BFAgArJtx8QmpSgBGPXfWtvu5F63J2lfy
aTBuXvLQACly80yWwTsm0GLvtc8nKDsPIU6PodfL8OPHEG1IqqgOkUP2rP6JTh2f
IoIXMYBITdSfETW99GO4Yd7RDQ2KXvPkfHlDUTvgWV+8NJPrttSNgP4lCeNR9Me+
wM/OhWNQGssKvEs2/Myr3Nq9QutCfGxJYdODu3hOHBfvASwpZCiRAFB2RJefshJq
1S9ML8cDkQYNRys7LN2Ynby0Hpa8MdXLn6/JEA/C+jrBjxEL8KE+pFCHeptXWzZY
Yj+9DEdRTAt9rhpojXjfGdssJwlOK/IYlrjLfNsplYKM0PNLzqdj/s9i/g==
=w2VR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmG3VRQACgkQmmx57+YA
GNl/vw/9GZ+hk1r0szJvEAdI2gTqlMf6ZkrEoxI0VGei8Wky6wg2Dni1nrTiddKU
pd+9PtD3DZALuypIvrWeu2VfJfLLF5ifUNyUpTFcOpj8BVXIteGuoDzNMhIrpNO7
a4MzsZZTp5o782IkRjyZv/oxr4ANleCZsICeGfpyhCwvRi6ZGig+5Bf6LEvVZRyW
8cjcW1n6Pi9EjiPdLqgc1LFI3IHx/nZ1TX/3ioeoDzWv1vPS/1Q2U0deR4jfjFOt
/Ji7IS6DvOAvsTzUyV97VndPTyauDP9/8poga1odmCiwagCyzb7BNiNT3oo91YxN
6WHiMber30uVVsnqsqcwnegY/PG5Lmfl3GfchnVVlzTjviTnV2coyGhJU2kelPvz
8XisIbTSRa/uxEK/+43/Zuqxb/2bBwJANPqDO8FGdhEaowhCFT4+aCAYZ83hRoBV
1XWMYksO77Sp0cghFQB36XzEyBkhQnhcbVvW1bZ7PBjdS2rJ/u0HoyVM2XQghu+a
XYts4Shclg3RWKWNklzmgJ0UeNwgIlLNq2kgEEUI6Be8HI6K8z5XmuiMa27knXuc
ONGfvekOgJv/Gz828l+e4T1MhqC42M17uGdh1D/G/B2uDJZJO7qwj4zXKeQmg5i/
SU0A7VyXJRTc4jb6S5iSEE9LPKgj2Nwgmbsh2ARmQbevT21ccZM=
=B220
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.16, round 2:
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
regression that LCDIF driver stops probe, because interconnect
provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.
* tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just some minor DT fixups we found after things got merged.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYaeDMwAKCRClhN6SrnTN
2GjoAQDSXE8T2VEeesw1JimIe/gi05870YR5uCw+yW0PbtapQgD9HejF9qp96jqx
VLRUJHCeoPm1f7dXmxr6O2Q5yeBKtws=
=QELQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=j9OT
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux into arm/fixes
Asahi SoC DT/binding fixes for 5.16.
Just some minor DT fixups we found after things got merged.
* tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: dts: apple: change ethernet0 device type to ethernet
Link: https://lore.kernel.org/r/cc9a1a67-3b2d-ae9f-5733-859111eb78c1@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Vladimir Oltean to update SJA1105 switch RGMII delay for
a few boards, so that kernel doesn't warn on the legacy bindings.
- Remove redundant interrupt declaration for gpio-keys on board
ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15
and later.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmGgsRAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7cvAgAqnWK9OcpXErsi/ACWOqJ64F4yT8k
ePzcGPvzFeNbuk2bm8l/zz7WueoKzM5tvk9bocwyUveXDwIIBIC6CoDU0yiHHh9P
x9hhoU9VaY0GhFKzBfCuMXb7i0r5QIMOH++TJ1muFP+wRgBkGdPhyL+ijvd1EhQK
K0QB+izgdcI1TvCypC2eZMY5vsyOCmnqE3EpQVzJSDfzJeFa48jFZ2eybGd6l9AQ
/3W4nWQwS/930TbMSM1hh24v8gGxwei+GWbwPREKT2Fu/Rj9jctX2s01/nsMu73Q
0bpf7nXx+uxS3CaN8vWIKEDRHsOeHPIIJ7wwBShIwh3XQtLb6lmS546rXA==
=8XSh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3mvY
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.16:
- A series from Vladimir Oltean to update SJA1105 switch RGMII delay for
a few boards, so that kernel doesn't warn on the legacy bindings.
- Remove redundant interrupt declaration for gpio-keys on board
ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15
and later.
* tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch
ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch
ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch
Link: https://lore.kernel.org/r/20211126100716.GF4216@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to USI v2 driver change[1], serial_0 node should be converted to
use the USI node hierarchy. syscon_peric0 will be used as a syscon node
to control the USI00_USI_SW_CONF register.
This also changes the serial node name from uart@ to serial@.
[1]: https://lore.kernel.org/linux-samsung-soc/20211204195757.8600-2-semen.protsenko@linaro.org/
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211208091853.8557-1-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
This patch fixes the Bluetooth on ROCK Pi 4 boards.
ROCK Pi 4 boards has BCM4345C5 and now it is supported
on Mainline Linux, brcm,bcm43438-bt still working but
observed the BT Audio issues with latest test.
So, use the BCM4345C5 compatible and its associated
properties like clock-names as lpo and max-speed.
Attach vbat and vddio supply rails as well.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20211112142359.320798-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add second DSI compatible to comply with DT schema validation
comming in the second patch.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211211233818.88482-1-david@ixit.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the watchdog node which also enables reboot support on the t8103.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is required for DCP to boot successfully; it seems if power gating
is allowed, they do not wake up properly.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
The Quartz64 Model A has the SPI pins broken out on its pin
header. The actual pins being used though are not the m0
variant, but the m1 variant, which also lacks the cs1 pin.
This commit overrides pinctrl-0 accordingly for this board.
spi1 is intentionally left disabled, as anyone wishing to add
SPI devices needs to edit the dts anyway, and the pins are more
useful as GPIOs for the rest of the users.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211127141910.12649-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds the four spi nodes (spi0, spi1, spi2, spi3) to the
rk356x dtsi. These are from the downstream device tree, though
I have double-checked that their interrupts and DMA numbers are
correct. I have also tested spi1 with an SPI device.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211127141910.12649-3-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-----BEGIN PGP SIGNATURE-----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=BWkT
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Revert emulation of Marvell Armada A3720 expansion ROM because it
doesn't work as expected (Marek Behún)
- Assert PERST# in Apple M1 driver to fix initialization when booting
from bootloaders using PCIe, such as U-Boot (Marc Zyngier)
- Describe PERST# as active low in Apple T8103 DT and update driver to
match (Marc Zyngier)
* tag 'pci-v5.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: apple: Fix PERST# polarity
arm64: dts: apple: t8103: Mark PCIe PERST# polarity active low in DT
PCI: apple: Follow the PCIe specifications when resetting the port
Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
Add mac address in efuse, so that EQOS driver can parse it from nvmem
cell.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove unused "nvmem_macaddr_swap" property for FEC, there is no info in both
dt-binding and driver, so it's safe to remove it.
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to commit 0a4355c2b7 ("net: phy: realtek: add dt property to
disable CLKOUT clock"), diable CLKOUT clock for FEC PHY to save power on
i.MX8MP EVK board.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As the name indicates, PERST# is active low. Fix the DT description to
match the HW behaviour.
Fixes: ff2a8d91d8 ("arm64: apple: Add PCIe node")
Link: https://lore.kernel.org/r/20211123180636.80558-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Initial support for the Renesas Spider CPU and BreakOut boards.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Takehito Nakamura <takehito.nakamura.nx@renesas.com>
Link: https://lore.kernel.org/r/20211201073308.1003945-14-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The binding node names for the thermal zones are not successfully
validated by the dt-schemas.
Fix the validation by changing from sensor-thermalN or thermal-sensor-N
to sensorN-thermal. Provide node labels of the form sensorN_thermal to
ensure consistency with the other platform implementations.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211104224033.3997504-1-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The driver doesn't support these, they shouldn't be in the SoC include
anyway, and we're now configuring this in the bootloader instead. This
also solves the j274 1G/10G Ethernet variant discrepancy, since that
will now be configured properly based on the dynamic ADT property.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
AM642 EVM has two CAN connecters brought out from the two MCAN instances in
the main domain through transceivers. Add device tree nodes for
transceivers and set the required properties in the mcan device tree nodes,
in EVM device tree file.
On AM642 SK there are no connectors brought out for CAN. Therefore, disable
the mcan device tree nodes in the SK device tree file.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20211122134159.29936-7-a-govindraju@ti.com
Add Support for two MCAN controllers present on the am64x SOC. Both support
classic CAN messages as well as CAN-FD.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20211122134159.29936-6-a-govindraju@ti.com
Add four MCAN nodes present on the common processor board and set a
maximum data rate of 5 Mbps. Disable all other nodes as they
are not brought out on the common processor board.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20211122134159.29936-5-a-govindraju@ti.com
Add support for 14 MCAN controllers in main domain and 2 MCAN controllers
present in mcu domain. All the MCAN controllers support classic CAN
messages as well as CAN_FD messages.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20211122134159.29936-4-a-govindraju@ti.com
AM654 base board and iot platforms do not have mcan instances pinned out.
Therefore, disable all the mcan instances.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20211122134159.29936-3-a-govindraju@ti.com
Add Support for two MCAN controllers present on the am65x SOC. Both support
classic CAN messages as well as CAN-FD.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20211122134159.29936-2-a-govindraju@ti.com
Expose the PCI node corresponding to the WiFi device and give it
a 'local-mac-address' property. The bootloader will update it
(m1n1 already has the required feature).
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This UART is connected to the debug port of the WLAN module. It is
mostly useless, but makes for a good test case for runtime-pm without
having to unbind the console from the main system UART.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds the two PMGR nodes and all known power state subnodes. Since
there are a large number of them, let's put them in a separate file to
include.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
In Device Tree specification it's recommended to use "i2c" name for I2C
nodes. Now that i2c-exynos5 dt-schema binding was added, it shows some
warnings like this when validating HS-I2C nodes:
hsi2c@xxxxxxxxx: $nodename:0: 'hsi2c@xxxxxxxx' does not match
'^i2c(@.*)?'
From schema: Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
Rename hsi2c@* to i2c@* to fix those warnings.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211204215820.17378-9-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
This adds support for TQMa8Mx module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa8MQNL module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for TQMa8MQML module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the basic dts file for i.MX8ULP EVK board.
Only the necessary devices for minimal system boot up are enabled:
enet, emmc, usb, console uart.
some of the devices' pin status may lost during low power mode,
so additional sleep pinctrl properties are included by default.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the basic dtsi support for i.MX8ULP.
i.MX 8ULP is part of the ULP family with emphasis on extreme
low-power techniques using the 28 nm fully depleted silicon on
insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be
based on asymmetric architecture, however will add a third DSP
domain for advanced voice/audio capability and a Graphics domain
where it is possible to access graphics resources from the
application side or the realtime side.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The baseboard has support for a TDNext 5640 Camera which
uses an OV5640 connected to a 2-lane CSI2 interface.
With the CSI and mipi_csi2 drivers pointing to an OV5640 camera, the media
pipeline can be configured with the following:
media-ctl --links "'ov5640 1-003c':0->'imx7-mipi-csis.0':0[1]"
The camera and various nodes in the pipeline can be configured for UYVY:
media-ctl -v -V "'ov5640 1-003c':0 [fmt:UYVY8_1X16/640x480 field:none]"
media-ctl -v -V "'csi':0 [fmt:UYVY8_1X16/640x480 field:none]"
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a csi bridge and csis interface that tie together
to allow csi2 capture.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mxsfb driver handling imx8mq lcdif doesn't yet request the
interconnect bandwidth that's needed at runtime when the description is
present in the DT node.
So remove that description and bring it back when it's supported.
Fixes: ad1abc8a03 ("arm64: dts: imx8mq: Add interconnect for lcdif")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Time Sync Event Router (TIMESYNC_INTRTR0) implements a set of
multiplexers to provide selection of active CPTS time sync events for
routing to CPTS capable modules.
This patch adds DT node TIMESYNC_INTRTR0 using "pinctrl-single" bindings.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20211202173114.9936-1-christian.gmeiner@gmail.com
