Remove the pdptrs_changed() check when loading L2's CR3. The set of
available registers is always reset when switching VMCSes (see commit
e5d03de593, "KVM: nVMX: Reset register cache (available and dirty
masks) on VMCS switch"), thus the "are PDPTRs available" check will
always fail. And even if it didn't fail, reading guest memory to check
the PDPTRs is just as expensive as reading guest memory to load 'em.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210607090203.133058-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the remote TLB flush logic is specific to VMX.
Move it to a common place so that SVM can use it as well.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <4f4e4ca19778437dae502f44363a38e99e3ef5d1.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the 'nested_run' statistic counts all guest-entry attempts,
including those that fail during vmentry checks on Intel and during
consistency checks on AMD. Convert this statistic to count only those
guest-entries that make it past these state checks and make it to guest
code. This will tell us the number of guest-entries that actually executed
or tried to execute guest code.
Signed-off-by: Krish Sadhukhan <Krish.Sadhukhan@oracle.com>
Message-Id: <20210609180340.104248-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that .post_leave_smm() is gone, drop "pre_" from the remaining
helpers. The helpers aren't invoked purely before SMI/RSM processing,
e.g. both helpers are invoked after state is snapshotted (from regs or
SMRAM), and the RSM helper is invoked after some amount of register state
has been stuffed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that APICv/AVIC enablement is kept in common 'enable_apicv' variable,
there's no need to call kvm_apicv_init() from vendor specific code.
No functional change intended.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210609150911.1471882-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unify VMX and SVM code by moving APICv/AVIC enablement tracking to common
'enable_apicv' variable. Note: unlike APICv, AVIC is disabled by default.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210609150911.1471882-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't allow posted interrupts to modify a stale posted interrupt
descriptor (including the initial value of 0).
Empirical tests on real hardware reveal that a posted interrupt
descriptor referencing an unbacked address has PCI bus error semantics
(reads as all 1's; writes are ignored). However, kvm can't distinguish
unbacked addresses from device-backed (MMIO) addresses, so it should
really ask userspace for an MMIO completion. That's overly
complicated, so just punt with KVM_INTERNAL_ERROR.
Don't return the error until the posted interrupt descriptor is
actually accessed. We don't want to break the existing kvm-unit-tests
that assume they can launch an L2 VM with a posted interrupt
descriptor that references MMIO space in L1.
Fixes: 6beb7bd52e ("kvm: nVMX: Refactor nested_get_vmcs12_pages()")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-8-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the kernel has no mapping for the vmcs02 virtual APIC page,
userspace MMIO completion is necessary to process nested posted
interrupts. This is not a configuration that KVM supports. Rather than
silently ignoring the problem, try to exit to userspace with
KVM_INTERNAL_ERROR.
Note that the event that triggers this error is consumed as a
side-effect of a call to kvm_check_nested_events. On some paths
(notably through kvm_vcpu_check_block), the error is dropped. In any
case, this is an incremental improvement over always ignoring the
error.
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-7-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change intended.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the TSC offset and multiplier on nested transitions and expose
the TSC scaling feature to L1.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-11-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vmx_vcpu_load_vmcs() writes the TSC_MULTIPLIER field of the
VMCS every time the VMCS is loaded. Instead of doing this, set this
field from common code on initialization and whenever the scaling ratio
changes.
Additionally remove vmx->current_tsc_ratio. This field is redundant as
vcpu->arch.tsc_scaling_ratio already tracks the current TSC scaling
ratio. The vmx->current_tsc_ratio field is only used for avoiding
unnecessary writes but it is no longer needed after removing the code
from the VMCS load path.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Message-Id: <20210607105438.16541-1-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The write_l1_tsc_offset() callback has a misleading name. It does not
set L1's TSC offset, it rather updates the current TSC offset which
might be different if a nested guest is executing. Additionally, both
the vmx and svm implementations use the same logic for calculating the
current TSC before writing it to hardware.
Rename the function and move the common logic to the caller. The vmx/svm
specific code now merely sets the given offset to the corresponding
hardware structure.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-9-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to implement as much of the nested TSC scaling logic as
possible in common code, we need these vendor callbacks for retrieving
the TSC offset and the TSC multiplier that L1 has set for L2.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-7-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store L1's scaling ratio in the kvm_vcpu_arch struct like we already do
for L1's TSC offset. This allows for easy save/restore when we enter and
then exit the nested guest.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-3-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding break statements instead of just letting
the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Message-Id: <20210528200756.GA39320@embeddedor>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_get_linear_rip() handles x86/long mode cases well and has
better readability, __kvm_set_rflags() also use the paired
function kvm_is_linear_rip() to check the vcpu->arch.singlestep_rip
set in kvm_arch_vcpu_ioctl_set_guest_debug(), so change the
"CS.BASE + RIP" code in kvm_arch_vcpu_ioctl_set_guest_debug() and
handle_exception_nmi() to this one.
Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <20210526063828.1173-1-yuan.yao@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For VMX, when a vcpu enters HLT emulation, pi_post_block will:
1) Add vcpu to per-cpu list of blocked vcpus.
2) Program the posted-interrupt descriptor "notification vector"
to POSTED_INTR_WAKEUP_VECTOR
With interrupt remapping, an interrupt will set the PIR bit for the
vector programmed for the device on the CPU, test-and-set the
ON bit on the posted interrupt descriptor, and if the ON bit is clear
generate an interrupt for the notification vector.
This way, the target CPU wakes upon a device interrupt and wakes up
the target vcpu.
Problem is that pi_post_block only programs the notification vector
if kvm_arch_has_assigned_device() is true. Its possible for the
following to happen:
1) vcpu V HLTs on pcpu P, kvm_arch_has_assigned_device is false,
notification vector is not programmed
2) device is assigned to VM
3) device interrupts vcpu V, sets ON bit
(notification vector not programmed, so pcpu P remains in idle)
4) vcpu 0 IPIs vcpu V (in guest), but since pi descriptor ON bit is set,
kvm_vcpu_kick is skipped
5) vcpu 0 busy spins on vcpu V's response for several seconds, until
RCU watchdog NMIs all vCPUs.
To fix this, use the start_assignment kvm_x86_ops callback to kick
vcpus out of the halt loop, so the notification vector is
properly reprogrammed to the wakeup vector.
Reported-by: Pei Zhang <pezhang@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210526172014.GA29007@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_X86_LOCAL_APIC is always on when CONFIG_KVM (on x86) since
commit e42eef4ba3 ("KVM: add X86_LOCAL_APIC dependency").
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210518144339.1987982-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
-----BEGIN PGP SIGNATURE-----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=57tg
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.13, take #1
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
Bus lock debug exception is an ability to notify the kernel by an #DB
trap after the instruction acquires a bus lock and is executed when
CPL>0. This allows the kernel to enforce user application throttling or
mitigations.
Existence of bus lock debug exception is enumerated via
CPUID.(EAX=7,ECX=0).ECX[24]. Software can enable these exceptions by
setting bit 2 of the MSR_IA32_DEBUGCTL. Expose the CPUID to guest and
emulate the MSR handling when guest enables it.
Support for this feature was originally developed by Xiaoyao Li and
Chenyi Qiang, but code has since changed enough that this patch has
nothing in common with theirs, except for this commit message.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210202090433.13441-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Squish the Intel and AMD emulation of MSR_TSC_AUX together and tie it to
the guest CPU model instead of the host CPU behavior. While not strictly
necessary to avoid guest breakage, emulating cross-vendor "architecture"
will provide consistent behavior for the guest, e.g. WRMSR fault behavior
won't change if the vCPU is migrated to a host with divergent behavior.
Note, the "new" kvm_is_supported_user_return_msr() checks do not add new
functionality on either SVM or VMX. On SVM, the equivalent was
"tsc_aux_uret_slot < 0", and on VMX the check was buried in the
vmx_find_uret_msr() call at the find_uret_msr label.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that SVM and VMX both probe MSRs before "defining" user return slots
for them, consolidate the code for probe+define into common x86 and
eliminate the odd behavior of having the vendor code define the slot for
a given MSR.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tag TSX_CTRL as not needing to be loaded when RTM isn't supported in the
host. Crushing the write mask to '0' has the same effect, but requires
more mental gymnastics to understand.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop VMX's global list of user return MSRs now that VMX doesn't resort said
list to isolate "active" MSRs, i.e. now that VMX's list and x86's list have
the same MSRs in the same order.
In addition to eliminating the redundant list, this will also allow moving
more of the list management into common x86.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly flag a uret MSR as needing to be loaded into hardware instead of
resorting the list of "active" MSRs and tracking how many MSRs in total
need to be loaded. The only benefit to sorting the list is that the loop
to load MSRs during vmx_prepare_switch_to_guest() doesn't need to iterate
over all supported uret MRS, only those that are active. But that is a
pointless optimization, as the most common case, running a 64-bit guest,
will load the vast majority of MSRs. Not to mention that a single WRMSR is
far more expensive than iterating over the list.
Providing a stable list order obviates the need to track a given MSR's
"slot" in the per-CPU list of user return MSRs; all lists simply use the
same ordering. Future patches will take advantage of the stable order to
further simplify the related code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure the list of user return MSRs that are actually supported at
module init instead of reprobing the list of possible MSRs every time a
vCPU is created. Curating the list on a per-vCPU basis is pointless; KVM
is completely hosed if the set of supported MSRs changes after module init,
or if the set of MSRs differs per physical PCU.
The per-vCPU lists also increase complexity (see __vmx_find_uret_msr()) and
creates corner cases that _should_ be impossible, but theoretically exist
in KVM, e.g. advertising RDTSCP to userspace without actually being able to
virtualize RDTSCP if probing MSR_TSC_AUX fails.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow userspace to enable RDPID for a guest without also enabling RDTSCP.
Aside from checking for RDPID support in the obvious flows, VMX also needs
to set ENABLE_RDTSCP=1 when RDPID is exposed.
For the record, there is no known scenario where enabling RDPID without
RDTSCP is desirable. But, both AMD and Intel architectures allow for the
condition, i.e. this is purely to make KVM more architecturally accurate.
Fixes: 41cd02c6f7 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: stable@vger.kernel.org
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable preemption when probing a user return MSR via RDSMR/WRMSR. If
the MSR holds a different value per logical CPU, the WRMSR could corrupt
the host's value if KVM is preempted between the RDMSR and WRMSR, and
then rescheduled on a different CPU.
Opportunistically land the helper in common x86, SVM will use the helper
in a future commit.
Fixes: 4be5341026 ("KVM: VMX: Initialize vmx->guest_msrs[] right after allocation")
Cc: stable@vger.kernel.org
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-6-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a dedicated intercept enum for RDPID instead of piggybacking RDTSCP.
Unlike VMX's ENABLE_RDTSCP, RDPID is not bound to SVM's RDTSCP intercept.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-5-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear KVM's RDPID capability if the ENABLE_RDTSCP secondary exec control is
unsupported. Despite being enumerated in a separate CPUID flag, RDPID is
bundled under the same VMCS control as RDTSCP and will #UD in VMX non-root
if ENABLE_RDTSCP is not enabled.
Fixes: 41cd02c6f7 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-2-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When enlightened VMCS is in use and nested state is migrated with
vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs
page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr'
and we can't read it from VP assist page because userspace may decide
to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state
(and QEMU, for example, does exactly that). To make sure eVMCS is
mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES
request.
Commit f2c7ef3ba9 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to
nested_vmx_vmexit() to make sure MSR permission bitmap is not switched
when an immediate exit from L2 to L1 happens right after migration (caused
by a pending event, for example). Unfortunately, in the exact same
situation we still need to have eVMCS mapped so
nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS.
As a band-aid, restore nested_get_evmcs_page() when clearing
KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far
from being ideal as we can't easily propagate possible failures and even if
we could, this is most likely already too late to do so. The whole
'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration
seems to be fragile as we diverge too much from the 'native' path when
vmptr loading happens on vmx_set_nested_state().
Fixes: f2c7ef3ba9 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210503150854.1144255-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the enter/exit logic in {svm,vmx}_vcpu_enter_exit() to common
helpers. Opportunistically update the somewhat stale comment about the
updates needing to occur immediately after VM-Exit.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210505002735.1684165-9-seanjc@google.com
Defer the call to account guest time until after servicing any IRQ(s)
that happened in the guest or immediately after VM-Exit. Tick-based
accounting of vCPU time relies on PF_VCPU being set when the tick IRQ
handler runs, and IRQs are blocked throughout the main sequence of
vcpu_enter_guest(), including the call into vendor code to actually
enter and exit the guest.
This fixes a bug where reported guest time remains '0', even when
running an infinite loop in the guest:
https://bugzilla.kernel.org/show_bug.cgi?id=209831
Fixes: 87fa7f3e98 ("x86/kvm: Move context tracking where it belongs")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210505002735.1684165-4-seanjc@google.com
In VMX, the host NMI handler needs to be invoked after NMI VM-Exit.
Before commit 1a5488ef0d ("KVM: VMX: Invoke NMI handler via indirect
call instead of INTn"), this was done by INTn ("int $2"). But INTn
microcode is relatively expensive, so the commit reworked NMI VM-Exit
handling to invoke the kernel handler by function call.
But this missed a detail. The NMI entry point for direct invocation is
fetched from the IDT table and called on the kernel stack. But on 64-bit
the NMI entry installed in the IDT expects to be invoked on the IST stack.
It relies on the "NMI executing" variable on the IST stack to work
correctly, which is at a fixed position in the IST stack. When the entry
point is unexpectedly called on the kernel stack, the RSP-addressed "NMI
executing" variable is obviously also on the kernel stack and is
"uninitialized" and can cause the NMI entry code to run in the wrong way.
Provide a non-ist entry point for VMX which shares the C-function with
the regular NMI entry and invoke the new asm entry point instead.
On 32-bit this just maps to the regular NMI entry point as 32-bit has no
ISTs and is not affected.
[ tglx: Made it independent for backporting, massaged changelog ]
Fixes: 1a5488ef0d ("KVM: VMX: Invoke NMI handler via indirect call instead of INTn")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Lai Jiangshan <laijs@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87r1imi8i1.ffs@nanos.tec.linutronix.de
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGmYIACgkQEsHwGGHe
VUr45w/8CSXr7MXaFBj4To0hTWJXSZyF6YGqlZOSJXFcFh4cWTNwfVOoFaV47aDo
+HsCNTkGENcKhLrDUWDRiG/Uo46jxtOtl1vhq7U4pGemSYH871XWOKfb5k5XNMwn
/uhaHMI4aEfd6bUFnF518NeyRIsD0BdqFj4tB7RbAiyFwdETDX9Tkj/uBKnQ4zon
4tEDoXgThuK5YKK9zVQg5pa7aFp2zg1CAdX/WzBkS8BHVBPXSV0CF97AJYQOM/V+
lUHv+BN3wp97GYHPQMPsbkNr8IuFoe2mIvikwjxg8iOFpzEU1G1u09XV9R+PXByX
LclFTRqK/2uU5hJlcsBiKfUuidyErYMRYImbMAOREt2w0ogWVu2zQ7HkjVve25h1
sQPwPudbAt6STbqRxvpmB3yoV4TCYwnF91FcWgEy+rcEK2BDsHCnScA45TsK5I1C
kGR1K17pHXprgMZFPveH+LgxewB6smDv+HllxQdSG67LhMJXcs2Epz0TsN8VsXw8
dlD3lGReK+5qy9FTgO7mY0xhiXGz1IbEdAPU4eRBgih13puu03+jqgMaMabvBWKD
wax+BWJUrPtetwD5fBPhlS/XdJDnd8Mkv2xsf//+wT0s4p+g++l1APYxeB8QEehm
Pd7Mvxm4GvQkfE13QEVIPYQRIXCMH/e9qixtY5SHUZDBVkUyFM0=
=bO1i
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 cleanups from Borislav Petkov:
"Trivial cleanups and fixes all over the place"
* tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove me from IDE/ATAPI section
x86/pat: Do not compile stubbed functions when X86_PAT is off
x86/asm: Ensure asm/proto.h can be included stand-alone
x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files
x86/msr: Make locally used functions static
x86/cacheinfo: Remove unneeded dead-store initialization
x86/process/64: Move cpu_current_top_of_stack out of TSS
tools/turbostat: Unmark non-kernel-doc comment
x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL()
x86/fpu/math-emu: Fix function cast warning
x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
x86: Fix various typos in comments, take #2
x86: Remove unusual Unicode characters from comments
x86/kaslr: Return boolean values from a function returning bool
x86: Fix various typos in comments
x86/setup: Remove unused RESERVE_BRK_ARRAY()
stacktrace: Move documentation for arch_stack_walk_reliable() to header
x86: Remove duplicate TSC DEADLINE MSR definitions
Append raw to the direct variants of kvm_register_read/write(), and
drop the "l" from the mode-aware variants. I.e. make the mode-aware
variants the default, and make the direct variants scary sounding so as
to discourage use. Accessing the full 64-bit values irrespective of
mode is rarely the desired behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop bits 63:32 of the base and/or index GPRs when calculating the
effective address of a VMX instruction memory operand. Outside of 64-bit
mode, memory encodings are strictly limited to E*X and below.
Fixes: 064aea7747 ("KVM: nVMX: Decoding memory operands of VMX instructions")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop bits 63:32 of the VMCS field encoding when checking for a nested
VM-Exit on VMREAD/VMWRITE in !64-bit mode. VMREAD and VMWRITE always
use 32-bit operands outside of 64-bit mode.
The actual emulation of VMREAD/VMWRITE does the right thing, this bug is
purely limited to incorrectly causing a nested VM-Exit if a GPR happens
to have bits 63:32 set outside of 64-bit mode.
Fixes: a7cde481b6 ("KVM: nVMX: Do not forward VMREAD/VMWRITE VMExits to L1 if required so by vmcs12 vmread/vmwrite bitmaps")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop bits 63:32 when storing a DR/CR to a GPR when the vCPU is not in
64-bit mode. Per the SDM:
The operand size for these instructions is always 32 bits in non-64-bit
modes, regardless of the operand-size attribute.
CR8 technically isn't affected as CR8 isn't accessible outside of 64-bit
mode, but fix it up for consistency and to allow for future cleanup.
Fixes: 6aa8b732ca ("[PATCH] kvm: userspace interface")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable pass-through of the FS and GS base MSRs for 32-bit KVM. Intel's
SDM unequivocally states that the MSRs exist if and only if the CPU
supports x86-64. FS_BASE and GS_BASE are mostly a non-issue; a clever
guest could opportunistically use the MSRs without issue. KERNEL_GS_BASE
is a bigger problem, as a clever guest would subtly be broken if it were
migrated, as KVM disallows software access to the MSRs, and unlike the
direct variants, KERNEL_GS_BASE needs to be explicitly migrated as it's
not captured in the VMCS.
Fixes: 25c5f225be ("KVM: VMX: Enable MSR Bitmap feature")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422023831.3473491-1-seanjc@google.com>
[*NOT* for stable kernels. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invert the inline declarations of the MSR interception helpers between
the wrapper, vmx_set_intercept_for_msr(), and the core implementations,
vmx_{dis,en}able_intercept_for_msr(). Letting the compiler _not_
inline the implementation reduces KVM's code footprint by ~3k bytes.
Back when the helpers were added in commit 904e14fb7c ("KVM: VMX: make
MSR bitmaps per-VCPU"), both the wrapper and the implementations were
__always_inline because the end code distilled down to a few conditionals
and a bit operation. Today, the implementations involve a variety of
checks and bit ops in order to support userspace MSR filtering.
Furthermore, the vast majority of calls to manipulate MSR interception
are not performance sensitive, e.g. vCPU creation and x2APIC toggling.
On the other hand, the one path that is performance sensitive, dynamic
LBR passthrough, uses the wrappers, i.e. is largely untouched by
inverting the inlining.
In short, forcing the low level MSR interception code to be inlined no
longer makes sense.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210423221912.3857243-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use symbolic value, EPT_VIOLATION_GVA_TRANSLATED, instead of 0x100
in handle_ept_violation().
Signed-off-by: Yao Yuan <yuan.yao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <724e8271ea301aece3eb2afe286a9e2e92a70b18.1619136576.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable SGX virtualization now that KVM has the VM-Exit handlers needed
to trap-and-execute ENCLS to ensure correctness and/or enforce the CPU
model exposed to the guest. Add a KVM module param, "sgx", to allow an
admin to disable SGX virtualization independent of the kernel.
When supported in hardware and the kernel, advertise SGX1, SGX2 and SGX
LC to userspace via CPUID and wire up the ENCLS_EXITING bitmap based on
the guest's SGX capabilities, i.e. to allow ENCLS to be executed in an
SGX-enabled guest. With the exception of the provision key, all SGX
attribute bits may be exposed to the guest. Guest access to the
provision key, which is controlled via securityfs, will be added in a
future patch.
Note, KVM does not yet support exposing ENCLS_C leafs or ENCLV leafs.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <a99e9c23310c79f2f4175c1af4c4cbcef913c3e5.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VM-Exit handler to trap-and-execute EINIT when SGX LC is enabled
in the host. When SGX LC is enabled, the host kernel may rewrite the
hardware values at will, e.g. to launch enclaves with different signers,
thus KVM needs to intercept EINIT to ensure it is executed with the
correct LE hash (even if the guest sees a hardwired hash).
Switching the LE hash MSRs on VM-Enter/VM-Exit is not a viable option as
writing the MSRs is prohibitively expensive, e.g. on SKL hardware each
WRMSR is ~400 cycles. And because EINIT takes tens of thousands of
cycles to execute, the ~1500 cycle overhead to trap-and-execute EINIT is
unlikely to be noticed by the guest, let alone impact its overall SGX
performance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <57c92fa4d2083eb3be9e6355e3882fc90cffea87.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulate the four Launch Enclave public key hash MSRs (LE hash MSRs) that
exist on CPUs that support SGX Launch Control (LC). SGX LC modifies the
behavior of ENCLS[EINIT] to use the LE hash MSRs when verifying the key
used to sign an enclave. On CPUs without LC support, the LE hash is
hardwired into the CPU to an Intel controlled key (the Intel key is also
the reset value of the LE hash MSRs). Track the guest's desired hash so
that a future patch can stuff the hash into the hardware MSRs when
executing EINIT on behalf of the guest, when those MSRs are writable in
host.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <c58ef601ddf88f3a113add837969533099b1364a.1618196135.git.kai.huang@intel.com>
[Add a comment regarding the MSRs being available until SGX is locked.
- Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an ECREATE handler that will be used to intercept ECREATE for the
purpose of enforcing and enclave's MISCSELECT, ATTRIBUTES and XFRM, i.e.
to allow userspace to restrict SGX features via CPUID. ECREATE will be
intercepted when any of the aforementioned masks diverges from hardware
in order to enforce the desired CPUID model, i.e. inject #GP if the
guest attempts to set a bit that hasn't been enumerated as allowed-1 in
CPUID.
Note, access to the PROVISIONKEY is not yet supported.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <c3a97684f1b71b4f4626a1fc3879472a95651725.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce sgx.c and sgx.h, along with the framework for handling ENCLS
VM-Exits. Add a bool, enable_sgx, that will eventually be wired up to a
module param to control whether or not SGX virtualization is enabled at
runtime.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <1c782269608b2f5e1034be450f375a8432fb705d.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for handling VM-Exits that originate from a guest SGX
enclave. In SGX, an "enclave" is a new CPL3-only execution environment,
wherein the CPU and memory state is protected by hardware to make the
state inaccesible to code running outside of the enclave. When exiting
an enclave due to an asynchronous event (from the perspective of the
enclave), e.g. exceptions, interrupts, and VM-Exits, the enclave's state
is automatically saved and scrubbed (the CPU loads synthetic state), and
then reloaded when re-entering the enclave. E.g. after an instruction
based VM-Exit from an enclave, vmcs.GUEST_RIP will not contain the RIP
of the enclave instruction that trigered VM-Exit, but will instead point
to a RIP in the enclave's untrusted runtime (the guest userspace code
that coordinates entry/exit to/from the enclave).
To help a VMM recognize and handle exits from enclaves, SGX adds bits to
existing VMCS fields, VM_EXIT_REASON.VMX_EXIT_REASON_FROM_ENCLAVE and
GUEST_INTERRUPTIBILITY_INFO.GUEST_INTR_STATE_ENCLAVE_INTR. Define the
new architectural bits, and add a boolean to struct vcpu_vmx to cache
VMX_EXIT_REASON_FROM_ENCLAVE. Clear the bit in exit_reason so that
checks against exit_reason do not need to account for SGX, e.g.
"if (exit_reason == EXIT_REASON_EXCEPTION_NMI)" continues to work.
KVM is a largely a passive observer of the new bits, e.g. KVM needs to
account for the bits when propagating information to a nested VMM, but
otherwise doesn't need to act differently for the majority of VM-Exits
from enclaves.
The one scenario that is directly impacted is emulation, which is for
all intents and purposes impossible[1] since KVM does not have access to
the RIP or instruction stream that triggered the VM-Exit. The inability
to emulate is a non-issue for KVM, as most instructions that might
trigger VM-Exit unconditionally #UD in an enclave (before the VM-Exit
check. For the few instruction that conditionally #UD, KVM either never
sets the exiting control, e.g. PAUSE_EXITING[2], or sets it if and only
if the feature is not exposed to the guest in order to inject a #UD,
e.g. RDRAND_EXITING.
But, because it is still possible for a guest to trigger emulation,
e.g. MMIO, inject a #UD if KVM ever attempts emulation after a VM-Exit
from an enclave. This is architecturally accurate for instruction
VM-Exits, and for MMIO it's the least bad choice, e.g. it's preferable
to killing the VM. In practice, only broken or particularly stupid
guests should ever encounter this behavior.
Add a WARN in skip_emulated_instruction to detect any attempt to
modify the guest's RIP during an SGX enclave VM-Exit as all such flows
should either be unreachable or must handle exits from enclaves before
getting to skip_emulated_instruction.
[1] Impossible for all practical purposes. Not truly impossible
since KVM could implement some form of para-virtualization scheme.
[2] PAUSE_LOOP_EXITING only affects CPL0 and enclaves exist only at
CPL3, so we also don't need to worry about that interaction.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <315f54a8507d09c292463ef29104e1d4c62e9090.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
